Dual display for Pavilion Elite HPE - 580 t with NVIDIA GeForce GT 420

Similar Questions

• Problem adding a hard disk for Pavilion Elite HPE - 380 t

  Hello

  I am trying to replace my existing drive with a new WD 1 TB hard drive. So I intend to install the new WD drive as the 2nd drive, and then run the utility WD Acronis to clone the original to the new drive.

  However, when I install the new disk, the BIOS recognizes it, but I think it appears in Windows 7 such as D drive, but it does not work. When I run Acronis, he says that it doesn't detect any WD drive.

  I went into the BIOS and ran the test drive / self-test and it passed.

  I noticed that the SATA1 controller is enabled. He didn't check before installing the drive.

  The controller SATA1 mode is RAID. Not sure that it was previously.

  Oh, and I plugged the new drive SATA cable into the connector of the motherboard directly next to the SATA connector as my original drive.

  Everyone through this? Any suggestions?

  Thanks in advance,

  Steve

  You are right. It was the answer, sort of. When I started Windows 7, I went in the new disk drives and active management. I let the system assign drive letters. I then rebooted.

  Then when I came back to Windows, I was able to run the original utility WD Acronis True Image to clone my source drive to the new drive. When finished, stop the system, removed my original drive and the new drive my only drive.

  Everything works beautifully. I managed to replace my hard drive.

  Thanks for the tip.

  Steve

• Desktop PC HP Pavilion Elite HPE-410it - upgrade with the USB 3.0 card

  I want to add a 4xUSB3.0 to my pc card, using a PCI Express x 1 connector; the card has a molex connector 4 pins to the power supply.

  The problem is that on the cables coming out of the power supply unit I have not free connectors, except a connector 6-pin female designed for a graphics card.  I can't find any commercial cable to connect the female connector 6 pin mentioned the molex 4 pin of the card.

  Can you help me please?

  Hello

  You will need to tap into an existing SATA power connector, either go to an optical drive or a hard drive.

  This adapter should work.

• Video card (and others) upgrades for a HP Pavilion Elite HPE-510 t

  Hello... First of all, I just want to say that these forums have been an invaluable resource for me in my quest to upgrade my current PC. A lot of good answers and always at the top of the Google search results, you guys have been so super helpful. Without a doubt a very different experience from what I got when I bought my PC from a company that rhymes with 'hell '.

  I have a few specific questions, however, and thought I'd throw them to let experts weigh... For the record, I have a HP Pavilion Elite HPE - 510 t with all parts except for the video card, which is currently an ATI over-pants v4800. I am running three monitors 20 "(1 DVI and Display Port 2 at present, but who can be flexible). Also, I don't a few moderate games (FPS, MMO) and watch a lot of Netflix...

  1. I'm certainly looking to update my video card, but I do not know what actually fits. I'm ready to upgrade the PSU as well (probably to the Corsair CX-600 recommended elsewhere on this forum), so power should not be a problem. And money is not a huge problem either, as long as the card is less than $500 or more. I've been watching some of the newer cards (like a 680 GTX or even the new 770), but I'm afraid that they will not physically fit in the case, or will be not compatible with the motherboard (which seems to be the PCIe 1.0? Or I read wrong?). So basically, my ultimate question is: what is the best possible graphics card given my case current and potentially put to level power supply, motherboard, I could use? If it's important, SLI is feasible but not more.

  2. I also intend to add additional RAM. The page on the card to my PC to the HP support Site says it takes DDR3 1600 PC3 10600, but everything that I find these days in the RAM is DDR 3 1600 PC3 12800. My mother/PC card will support the 12800 or do I have to keep hunting to find 10600 sticks?

  3. and finally, I'll also put in a Pro 840 Samsung SSD. Do you know if the motherboard compatible with the SATA connectors suitable for speeds of 6 GB? Just plug page says "SATA" and does not specify a version.

  Any help you could give me on these questions would be greatly appreciated. This computer has served me well for a few years now, and I'm hoping to keep it for a few more years. Thanks in advance and have a nice day...

  Aaron

  Here are the specifications of plant origin and configurable options for your desktop HP Pavilion Elite HPE - 510 t CTO and here are the specs of his card mother IPISB-CH (Cleveland). According to the specifications, the motherboard uses the Chipset Intel H67 Express that supports an extension v2.0 x 16 PCIe and 3Gbs SATAII (SATA2).

  (1) SLI is not "feasible", so no need to go there. GeForce GTX 680 cards are going to be long, perhaps too long. You need to measure the space available at the back of the case more further along the x 16 PCIe slot to determine what can be installed. You will need to resign it a notch or two... until you find one that matches. The CX600 Corsair is a great choice and fits, even if you can buy the place CX600M. The CX600M is modular and allows much better management of the cables and so the potential for a better air circulation.

  (2) with regard to memory, the State of the plug;

  Four DIMM DDR3 240-pin connectors
  Supports the PC3 10600 connectors DIMM DDR3 (1333 MHz)
  Memory non - ECC, unbuffered

  Then, two sets of most of these (2 x 4 GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Kits should do the trick. You can also go to the website Crucial.com and use two of their 'guaranteed compatible memory upgrade'.

  (3) your computer supports speeds SATAII (3Gbs) and this is the best it will do. However, the SATA connector is identical to what is found on a SSD SATAIII and it should be compatible with your computer.

  Please send BRAVO

• Pavilion ELite HPE-250f: ATI Radeon HD 5770 have double or Single Link DVI

  I have a HP Pavilion Elite HPE-250f come with a special version of the HP of the HD5770 AMD. Features HP say the Single-Link DVI. However, the Board of Directors contains 2 DVI - I connectors, which suggests that it is related to two. I want to buy a 2560 x 1440 screen, but it requires a DVI Dual-Linked. Can anyone confirm that the version of HP is double-linked or indead SIngle-Link? Thank you.

  Hello

  From the following link, it says DVI dual-link:

  http://www.Walmart.com/IP/HP-HP-HPE-250F/14271926

  I hope this helps.

• Do I have reason to infer that I can't get two monitors running on my HP Pavilion Elite HPE - 410 t?

  I got the Pavilion Elite HPE - 410 t with the included nVidia GeForce 315 graphics card and tried to get two monitors put in place. I have two VGA screens and I run one of them off the coast of DVI using a VGA port to DVI, and it works fine. However, I can not all signals from the built-in VGA port, so I started to look around the site of HP. I came across a page that lists the motherboard Plug and he shouted that the embedded video is not available if a graphics card is installed.

  Thus, it seems that I am out of luck, but I just wanted to see if anyone could tell me if it is maybe something obvious that I'm missing. My nVidia monitors also has an HDMI port, but I understand that I would need a HDMI monitor to be able to use this port.

  Can someone let me know if I'm wrong in my understanding of my options, or if there is an easy solution?

  Thank you.

  Hello

  Yes, you are right to assume that if you have a video card installed, the integrated graphics chip is disabled.  Looking at the specifications of your card (see link below), he suggests that it has a VGA, DVI and HDMI connection.  However, I realize that these specifications vary and may not apply to the card that you have.

  NVIDIA GeForce 315

  If yours doesn't have the VGA adapter, then your also had reason to assume need you a monitor with an entry in order to use 2 monitors HDMI.

  Kind regards

  DP - K

• HP Pavilion Elite HPE-495uk for: HP Pavilion Elite HPE-495uk

  HP Pavilion Elite HPE-495uk Desktop Hi there I have the computer following and need to update my graphics card and want something with 2 GB what cards will fit in my system and have I not enough power to power a new 2 GB card? Any help would be great. Soon TV

  Hi there @Tele,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have any questions about the upgrade. I'll be happy to help you.

  The Notebooks of PC HP Pavilion Elite HPE-495uk Desktop, this computer has a slot PCI Express 1 x 16 for the graphics card and a 460 W power.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Pavilion Elite HPE 450 t PC: desktop computer will not be updated for windows 7 64, Microsoft tried without success.

  I have a PC Pavilion Elite HPE 450 t, and a few months ago he ceased to accept automatic updates from Microsoft downloads.

  I tried to use the tools that Microsoft has nothing helped.

  Some time after, my Norton Security software security suite failed and wouldn't charge.  Norton failed to find a solution.  I guess it must do something with the heavy backlog of unloaded updates.

  ? Is it possible to load windows 10 on win 7?

  I got my PC tested for viruses, root kits and it is clean, but updates are still not loading.

  Honestly, I'd appreciate any help that you folk can provide.  Thanks in advance

  Leon R.

  Hi there @LROSZKOW,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have had problems with the updates of Windows and want to know if you can upgrade to Windows 10. I'm happy to help you with this.

  Reading the questions you have described in your current system that you cannot upgrade to Windows 10, using the normal method of free upgrade. Your system should have the option available from a previous update of Windows, as the free update is delivered via Windows update. If you have a Windows 7 or 8.1 product key, then you could do a clean install of Windows 10 and use this key to activate your Windows 10 free documents. Of course, you want to first make a backup of your data.

  Another option would be to try to load the original image from the desktop computer, and then try to update again by using Windows Update. This assumes you have a working recovery partition or recovery media. Computers HP - performing a recovery of system HP (Windows 7)  But to protect your data, you want to make a first backup as I mentioned.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Which firewire cable do I need for computer desktop HP Pavilion Elite HPE-360uk

  Which firewire cable do I need for computer desktop HP Pavilion Elite HPE-360uk

  roches28,

  According to the specifications , it is an IEEE 1394 (aka Firewire 400) 6wire.

• New graphics card for HP Pavilion Elite HPE-170 t

  Hi, I'm getting artifacts screen sporadically, Ithink my video card is starting to go bad. I want to get a new one, but I do not know what will fit. My computer HP Pavilion Elite HPE-170 t:

  • Intel Core i7 - 860 quad-core processor [2.8 GHz, 1 MB L2 + 8 MB of cache N3 shared]
  • 8 GB DDR3 1333 MHz SDRAM
  • 1 TB hard drive 7200 RPM SATA 3 Gb/s
  • 1 GB ATI Radeon HD 4850 [2 DVI, HDMI and VGA adapters]
  • LightScribe SuperMulti DVD burner
  • Player 15-in-1 memory cards, 1 USB, 1394, audio
  • No TV Tuner
  • Creative Sound Blaster X - Fi Titanium

  I see by a few other questions here several cards video suggested, but these responses were a few years old and these video cards are no longer available.

  So, any suggestions on the new video cards less than $200, which will be more apt to little and works as easily as possible? Thank you!

  OK, I got my new video card, to be exact of it:

  http://www.Amazon.com/XFX-250E-800MHz-graphics-R7250EZNP4/DP/B00JM5XX9O/ref=dp_ob_title_ce

  http://www.xfxforce.com/en-us/products/AMD-Radeon-R7-series/AMD-Radeon-R7-250E-core-Edition-R7-250E-znp4

  It works like a champ! Took me about 5 minutes to install the card physically and 15 minutes to install all drivers and updates.

  So far so good - everything seems OK, so if anyone is looking for a video card for this configuration, it worked for me.

• Help with updates for HP MediaSmart Suite & DVD/BD discs for PC HP Pavilion Elite HPE-112y

  HP Pavilion Elite HPE-112y PC

  VT637AA-ABA

  Genuine Windows 7 Home Premium - 64-bit

  Blu - ray player

  HP MediaSmart Software Suite

  I bought my computer new from Best Buy in 2010.

  HP MediaSmart Version: 3.1.0.1

  HP TouchSmart DVD Version: 4.1.2.5122

  HP TouchSmart Music Version: 4.1.1.4604

  HP MediaSmart Photo Version: 4.1.2.4327

  HP MediaSmart video Version: 4.1.2.4322

  HULU Desktop: Host Version: 0.9.14.1 - SWF Version: 0.9.15.33

  HP MediaSmart/TouchSmart Netflix Version: 1.0.2.0

  I have apalogize, I know that this has been done before, but I'm looking for different software or updates not upgrades.

  A couple of weeks, I tried to watch a movie Blu - ray (made before 2013) through HP MediaSmart DVD, when I put the movie in him would ask if I wanted to check the updates, so I said yes, he started the process of loading and asked again if I wanted to check the updates. Finally, I took the film and went into settings, watched in updates and there was an update. So I chose the update and HP MediaSmart DVD HP TouchSmart DVD changed. After that, the movie played fine.
  
  Now I'm watching a Blu - ray movie (made in 2013) and still once he asks me if I want to check the updates, so I took the film out, went into settings, that update, but there is nothing there. I put the movie back to try again and he asks me if I want to check the updates, so I push No., he would say "disk ready for play. Press Play to start. "So I press start and it will immediately message asking if I want to check the updates. So then the movie is still in I go into the settings, that update, and there is still nothing.

  All DVD for the 2013 game and rain fines. All comics before 2013 play fine. All BDs for 2013 keep asking check updates.

  Now, I find another reason that could not work the BDs is because my DVD/BD players could be updated.

  Device: hp BD O DH4O3S SCSI CdRom Device & hp DVD a DH16AAL SCSI CdRom Device
  Driver provider: Microsoft
  Driver date: 21/06/2006
  Driver version: 6.1.7601.17514
  Digital signer: Microsoft Windows
  
  I clicked on the update for both driver and said that I was aware.

  I find no new updates for HP TouchSmart DVD on CyberLink website. Where can I check updates? In addition, what I have to update all of the HP MediaSmart Software Suite to make it work (and where I do that)? Are there updates for DVD/BD drives and if there is where can I find them?

  Someone, please help me to find the updates.

  Sorry it took so long to get back to that.

  I finally got a new monitor (a long while ago):

  HP Pavilion 22bw IPS monitor 21.5 backlit "

  1920 x 1080

  VGA, DVI - D, HDMI

  So I tried again a movie BD 2013 on the HP MediaSmart/TouchSmart DVD thanks to the new screen and he asked again if I want to check for an update, but it worked fine on PowerDVD from CyberLink 13 (which means I have to buy ). So I have not watched all BD movies on my computer for awhile.

  I recently bought a new computer and restored my old computer to its factory condition and reinstalled all programs and installed the updates I could find.

  After I restored the computer I tried BD 2013 & 2015 on HP MediaSmart/TouchSmart DVD movies and he even asked if I want to check for an update. It's been 2 years and still no new updates! Looks like HP MediaSmart has become obsolete. I don't know if PowerDVD 13 still works because I obviously don't buy it.

  Thus, it seems that if someone wants to play movies BD 2013 or newer that they should ensure that they have the right connection between the monitor and the computer and buy a new BD software to replace the old software obsolete.

  With my new computer, I'll be closing this and boxing upward. So I don't need to worry about this more.

  Thank you for your time and your help. And good luck to anyone else who might have the same problem.

• HP Pavilion Elite HPE 547c: upgrade graphics card for HP Elite

  I tried to replace/upgrade to update my graphics card for my desktop PC. I tried several video cards, but with each one, once it is installed and the computer turned on, the image does not register with the monitor. Everything else seems to work, but the monitor gives no answer. It was only a problem once the original video card has been removed. The current video card, I am trying to install is the NVIDIA GEFORCE GT 730.

  In the course of the years, I added a memory and the power supply has been upgraded, but all the rest are always original parts (http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/5035344/model/5074426/do...

  Is this a problem with the other parties, who will need to be replaced or is there something else I forget?

  Thank you.

  Hello

  You're dominant, in your case, the most important factor-BIOS compatibility... more recent maps, like the gt730, require the UEFI BIOS to run... you have a LEGACY BIOS system, and cannot do anything, unless you change your motherboard... your pc is a model of early 2011... UEFI standard HP in their systems of end of 2012...

  You can watch other maps, if... the 700 series card youre looking at is a maxwell model 2014... There are in this region that come with a feature of hybrid bios which offers wider compatibility on legacy systems... or you can look at maps more old pascal/fermi architecture that work exclusively on legacy BIOS systems...

  Hope this helps

  This answer solve your message or question?

  If Yes, then share the good news! Inform others that this response was helpful in accepting this solution.
  You can also show your appreciation by giving congratulations.

• The upgrade of the video for my desktop HP Pavilion Elite HPE-210y PC

  Yes, I have two questions about my PC.

  First, on the technical card for desktop HP Pavilion Elite HPE-210y PC, it shows a power 300 watt yet looking at the minimum requirments for the video card from the factory it require a 400 Watt power supply and the fact of the data sheet does not show the power suppy manufacturer he was wondering has.

  Second, I'm looking to upgrade the video card and I was wondering what the card would be a good replacement for a game without having to replace the power supply but if I have to adapt what power? (With a ceiling of $ 200 - $350 on power supply)

  SCLAW wrote...

  First, on the technical card for desktop HP Pavilion Elite HPE-210y PC, it shows a power 300 watt yet looking at the minimum requirments for the video card from the factory it require a 400 Watt power supply and the fact of the data sheet does not show the power suppy manufacturer he was wondering has.

  Yes, the power is 300 watts. Minimum 400 watts are for full power to retail graphics cards. The map provided by HP was custom designed to meet the requirements of power weaker and is is not the same as a retail card. HP has traditionally used Bestec and Lite-on original UPE.

  SCLAW wrote...

  Second, I'm looking to upgrade the video card and I was wondering what the card would be a good replacement for a game without having to replace the power supply but if I have to adapt what power? (With a ceiling of $ 200 - $350 on power supply)

  To install a gaming grade graphics card, you will need to replace your power supply. The Corsair CX500 and CX600 are highly recommend and forum favorite. Further, these power supplies are only slightly larger than a block of power SUPPLY HP stock and are known to adapt. Power supply Idleness will put you back on the $50 - $75. For useful information on the selection of a graphics card that fits your needs, read Guide of Big_Dave of a discrete video card selection .

  Frank

• HP Pavilion Elite HPE - 500f D: SSD replacement for HP Pavilion Elite HPE-500f to original desktop PC hard drive

  Hi all!

  I would like to replace the original hard drive came with my desktop HP Pavilion Elite HPE-500f with an SSD, but when I tried, I got the error message that my SSD drive was not big enough. The original hard drive is 1.35 TB. What size an SSD should be to replace the original CT 1.35 supplied with my HP so that I could use the 1.35 disc as my second drive and the ssd as my main drive?

  Thank you!

  Hello

  Yes I think a 240 GB SSD would be sufficient.  Using the hard drive for storage is a good idea.

  These articles HOWTO HP should be useful.

  You should be able to install the SSD in the existing hard drive cage as it is put into service for three hard drives.  Use a 2.5 "to 3.5" adapter.  You also need a SATA data cable.

  Don't forget to create the external recovery media and backup your data.

• Power for desktop Pavilion Elite HPE 550f.

  I want to know if the power supply for the Pavilion Elite HPE 550f active or passive PFC. the specs online say: 460 watts, PFC power adapter. I was not able to find whether it is active or passive.

  Thank you!

  Hello

  He is ACTIVE.  Delta made power supply HP 460 watt (Bordeaux). DPS 460 DB3 - A

  This article will give you an explanation of the difference between assets and liabilities.