Dual monitor - determine which screen a program opens the

Similar Questions

• Dual monitor second dark screen

  I use a Setup dual monitor both monitors same accurate on my pc at the same time on the same exact settings and one of the screens is much darker that the other I tried switching on the cable with no result and have searched the Internet for the past hours searching for answers with no result, any help would be appreciated , I'm completely at a loss I'm 100% sure that it is not a monitor problem

  Hello

  The mother system/card manufacturer and support of the manufacturer of video cards and devices, online
  documentation and drivers and forums would be a good source of help and information.

  These should help:

  Connect the multiple monitor to your PC
  http://Windows.Microsoft.com/en-us/Windows-8/how-connect-multiple-monitors

  Do more with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-8/multiple-monitors

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• am getting error on a blue screen when I open the website of the Bank.

  Hello

  Works for a few hours on my windows xp lenovo t410.

  And when I opened icicibank.com and go to personal banking. A blue screen error appears.

  Not afraid to open the site of icicibank.

  Help, please...

  Hi anilraavi,

  ·         What web browser do you use?

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: If you are using Internet Explorer, perform an optimization of Internet Explorer on the computer of the article.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 3: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• When open my photo album file and clicking on a photo to see the excel program opens the image viewer.

  I open an email with pictures.  When I click on the photo attached to the view, the excel program opens and not the image viewer.

  One of photo accessories save somewhere you can find it (for example, your desktop computer).
  Right-click on the file that you saved and select open with, then select "Choose program" (at the bottom of the context menu).

  If the program you want to use is listed as one of the "recommended programs", select it, click on the box to "Always use the selected program to open this kind of file" and click OK.

  If you want to use the Windows Picture and Fax Viewer to view photos (personally, I like free IrfanView better) AND it is NOT listed as a program "recommended" or under "Other programs", follow the instructions below:

  in Windows Explorer:

  • On the Tools menu, click folder... Options
  • Click the File Types tab.
  • Scroll down to the extension that you like, for example "JPG".
  • Press the restore button, if it exists.
  • Press the Advanced button.
  • Click the Open action.
  • Click on change...
  • In the Application used to perform action: enter C:\WINDOWS\system32\rundll32.exe C:\WINDOWS\System32\shimgvw.dll,ImageView_Fullscreen %1. "C:\WINDOWS" is the directory that contains your Windows installation.
  • Press OK

  You'll want to repeat for each extension (GIF, JPG, JPEG, etc.) for which you want to change the behavior.

• White screen when I open the Media Center.

  Original title: Media Center white

  When I opened the Media Center, there is a white screen. I wouldn't change a thing and it has worked before. I have Vista 64 Home Premium.

  Hello

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  The screen may be black or the menu screen may be unresponsive in Windows Media Center in Windows Vista.

  http://support.Microsoft.com/kb/935901/en-us

• All my programs open the same

  I was trying to open something, I went to open it with... and selected a program, not knowing that the always use this to this programme area has been checked.

  Now no matter what I can't open anything on the Internet (unless I chose 'New tab' or something) to Notepad except if I'm doing something special.

  I've seen some suggestions already there, such as regedit one and the http://support.microsoft.com/kb/950505 it didn't work because there was an error or such.

  Please help me.

  Hi HKoo,

  I'm sorry to hear that you have problems with the programs.

  Go us ahead and try to solve the problem as soon as possible.

  Did you make any changes before the show?

  What browser do you use?

  What exactly happens when you try to open the program?

  This issue seems to be a problem of association file, or in other words, the links to the files or programs are broken.

  Method 1: Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 2: Check the file associations

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  We can't wait to hear back on your part.

• Blue screen everytime I open the software

  It was great that I used adobe software, but now I get a blue screen whenever I try to open the software, it had never happened before, what should I do now

  Restart your computer in safe mode and see if you can start an adobe program.

• black screen, when you open the virtual machine console

  Hi guys need help in answering the following questions:
  When you open the console of the virtual machine, the connection process is fine, but it stops at a black screen

  

  That's what I use:
  (1) Windows 7 x 32
  VMRC 2) 5.1.0.20447
  (3) Mozilla Firefox 18.0.1
  (4) VMware vSphere Client 5.1
  (5) Vcloud 5.1.0.810718

  Here is my log:

  13/01/29 10:15:42.100 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:15:42.101 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3
  {{2013-01-29 10:15:42.101 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:191]: start: VMRC_MONIKER_vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C}, VMRC_EVENT_vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C}, 5.1\Firefox\vmware-vmrc.exe C:\Program Files VMware Remote Console Plug-ins, "C:\Program Files\Common VMware Remote Console Plug-in 5.1\Firefox\vmware-vmrc.exe - parent-PID 6316 - instance"vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C}"ID - 2 modes - message mode has 2-3
  29-01-2013 10:15:42.101 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:205]: process of creating VMRC
  29-01-2013 10:15:42.103 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:220]: loop from MsgWait
  29-01-2013 10:15:42.821 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:229]: A WAIT_OBJECT_0
  29-01-2013 10:15:42.821 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:256]: expect successful moniker
  {2013-01-29 10:15:42.832 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:149]: link to [VMRC_MONIKER_vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C]}
  29-01-2013 10:15:42.833 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:154]: BindToObject managed
  29-01-2013 10:15:42.845 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:217]: successful startup
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:379] 10:15:43.901: control of the VM has not been created
  29-01-2013 10:15:43.902 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 10:15:43.909 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:15:43.909: control of the VM has not been created
  29-01-2013 10:15:43.923 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:15:43.923: control of the VM has not been created
  29-01-2013 10:15:43.925 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:15:43.925: control of the VM has not been created
  29-01-2013 10:15:44.275 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:15:44.275 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3
  {{2013-01-29 10:15:44.275 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:191]: start: VMRC_MONIKER_vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD}, VMRC_EVENT_vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD}, 5.1\Firefox\vmware-vmrc.exe C:\Program Files VMware Remote Console Plug-ins, "C:\Program Files\Common VMware Remote Console Plug-in 5.1\Firefox\vmware-vmrc.exe - parent-PID 6316 - instance"vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD}"ID - 2 modes - message mode has 2-3
  29-01-2013 10:15:44.275 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:205]: process of creating VMRC
  29-01-2013 10:15:44.276 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:220]: loop from MsgWait
  29-01-2013 10:15:44.957 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:229]: A WAIT_OBJECT_0
  29-01-2013 10:15:44.957 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:256]: expect successful moniker
  {2013-01-29 10:15:44.958 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:149]: link to [VMRC_MONIKER_vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD]}
  29-01-2013 10:15:44.959 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:154]: BindToObject managed
  29-01-2013 10:15:44.970 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:217]: successful startup
  29-01-2013 10:15:46.770 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:15:46.770 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3
  {{2013-01-29 10:15:46.771 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:191]: start: VMRC_MONIKER_vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996}, VMRC_EVENT_vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996}, 5.1\Firefox\vmware-vmrc.exe C:\Program Files VMware Remote Console Plug-ins, "C:\Program Files\Common VMware Remote Console Plug-in 5.1\Firefox\vmware-vmrc.exe - parent-PID 6316 - instance ID 'vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996}' - mode 4 - message mode has 2-3
  29-01-2013 10:15:46.771 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:205]: process of creating VMRC
  29-01-2013 10:15:46.772 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:220]: loop from MsgWait
  29-01-2013 10:15:47.339 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/common/ScriptableObject.cc:321]: ID of property not found: onMessage
  29-01-2013 10:15:47.339 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/common/VmrcPlugin.cc:2548]: onMessage Manager call failed
  29-01-2013 10:15:47.379 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:229]: A WAIT_OBJECT_0
  29-01-2013 10:15:47.379 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:256]: expect successful moniker
  {2013-01-29 10:15:47.380 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:149]: link to [VMRC_MONIKER_vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996]}
  29-01-2013 10:15:47.381 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:154]: BindToObject managed
  29-01-2013 10:15:47.388 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:217]: successful startup
  29-01-2013 10:17:20.197 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:633]: no associated window with control of the virtual machine
  29-01-2013 10:59:13.788 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:633]: no associated window with control of the virtual machine
  29-01-2013 10:59:13.792 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:633]: no associated window with control of the virtual machine
  29-01-2013 10:59:15.303 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 10:59:15.308 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 10:59:15.324 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:59:15.324: control of the VM has not been created
  29-01-2013 10:59:15.326 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:59:15.326: control of the VM has not been created
  29-01-2013 10:59:33.283 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:59:33.284: control of the VM has not been created
  29-01-2013 10:59:33.540 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:59:33.540 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3

  Windows 7 x 32

  That's kinda our old friend is back.

  Two checklists

  1. check the version of the VM VGA driver, if that's the case, you must update the WDDM driver display driver.

  2. make sure that you use HW 7 and more.

  More info here

• What program opens the .dvd file created on a Windows XP computer?

  I tried to open the video that have a .dvd file extension. I tried several trial programs, but none does not recognize the extension. The videos were created on my old computer using Windows XP, but many programs I moved were lost when the hard drive is gone on my new Vista machine. I do not have Vista Ultimate so I can't use the previous versions feature and I tried so many programs to open these films that the Properties tab shows that this last program that the file 'opens with '. I guess I need to know what program created the.dvd files and what I can do to save them. I don't have the original avi or mpeg files any longer. Thanks in advance,

  You're welcome... and thanks for the comments.

  Congratulations for the recovery of your files.

• What program opens the CONTACT files in Vista?

  All of a sudden my Windows Contact [s] file open with WORD 2007? They fine & readable in Solution Explorer, but when I want to edit the file opens in WORD with a weird layout?

  Hello

  In windows vista wab.exe open contacts

  You can find it by searching or by manually selecting C:\Program Files\Windows Mail\wab.exe

  To open the contact files correctly, right click on the contacts file you want to open, and then select open with, choose default program, click Browse, locate wab.exe and select it, finally click ok

  Note: Be sure to always use the selected program to open this type of file is checked

  I hope this helps

  Good luck

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Which screen is best for the new laptop

  I am a photographer of nature pro and you are looking to buy a new convertible laptop and I decided on the spectrum of HP 360 x 13.3 inches. I'll be using it for travel, showing pictures to clients and on the road, making a few changes on the images. This is not my main editing tool, but when you travel for long periods, I would not share a few images.

  
  HP offers two screens:

  13.3 "diagonal QHD + FPS BrightView - backlight WLED (3200 x 1800)

  or

  13.3 "diagonal QHD UWVA BrightView backlight OLED compatible multitouch glass (2560 x 1440) on board edge

  For the race of lightroom and photoshop and make a few changes. Which screen is best?

  I'm not really familiar with OLED, but it seems that the main selling point is deep blacks. It is very good for watching movies and virtually nothing else. If you work for printing, so jet of ink or offset, she has a problem of pure and simple. Obviously, no drop-down list paper/ink never remotely cannot match - and if you're in there for a monumental disappointment when you see the result.

  The objective is always of "what you see is what you get". This means lower the contrast on the screen ratio.

  I keep my Eizos calibrated to 0.5 cd/m² dark purposes most - which is actually high enough - to get a good screen to print match. For some work on Matt paper I go as high as 1.2 cd/m².

  The other advantages of OLED - wide angles of vision and the wide range of colors - are already covered by IPS/PLS/AMVA existing panels.

• Projector of Windows closes full screen when you open the pdf file

  Hi, I hope someone here can help with a problem I have.

  I work in CS5, using AS2 on a Mac.

  I built a presentation that requires the need to open pdf files in Acrobat Reader... I built it on a Mac I just used the code geturl, which worked a treat... today when I tested it on a PC it opens the file in a browser window!

  I'm not really a coder and to rely on the search for pieces online that I can change... after many hours, I set the pdf by opening the problem using the method of fscommand, but unfortunately when the pdf file is closed, my presentation (which was running fullscreen) played himself at a window the initial scene size 100%!

  Y at - it a fix for this?

  Thanks in advance.

  I found a solution very simple here: http://www.northcode.com/blog.php/2008/03/16/Problem-with-Fullscreen-Flash-Projectors

• Windows media Center - when I try to download or open a program, open the page of link DVD extras cyber library

  Library of widows is blocking my computer when I try to download or open a program, the DVD link page extras cyber library opens. I can't stop, when I contacted Norton re problem could not access my computer as it blocked them as well! Please how can I prevent this?

  Hi Brian,.

  You have the Cyberlink multimedia software installed on the computer?

  Third party applications may need to be updated. When you browse Web sites or download multimedia files, Web sites related to specific applications appear. If you have installed the Cyberlink software, try uninstalling the same (make sure you have the copy of the software before you remove the application from the computer). See the link for how to uninstall applications from the control panel:

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  You can also post a screenshot of the image which shows the error message:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

  Please let us know if the problem still persists.

• How to change this program opens the mail attachments?

  My mail would not open attachments "doc". So experiment, list programs to open it with, I selected Windows Photo Viewer and forgotten to uncheck the files always open with this. Cannot find out how to go back and undo it. PhotoViewer trying to open everything - well sure cant.

  If win 7 goto Control Panel > default apps > extension 'doc' to find and associate with what you use to read (that is to say the word)

  If another OS let us know what.

• you try to run a program opens the 'open with '.

  Open with the error

  Hello world

  I need serious help! Whenever I click on any program for example internet Explorer, it comes up with a box "open with". No program will open or function properly, and double click on the icon also does not work.

  I tried some of the suggestions here as "redigit", but it comes up with an error box saying that the program cannot be found when I try and run it or something else. I tried to restore a corrupted profile, however, it won't let me connect you as a person other than the first registered user.

  Any ideas? Thanks :)

  See if this solution will work for you:

  Open with appears whenever I try to open a program

  http://forums.techguy.org/Windows-Vista/899995-solved-Open-box-opens-every.html

  Scroll down to the answer given by Phantom010:

  Download and merge the reg. EXEFIX .

  quote...

  Try this registry fix: EXEFIX

  Unzip the patch and extract it. REG file on your desktop. Right click on the REG file and choose Merge. Note that you must be an administrator to apply this hotfix.

  Reset.