Dual monitor (model: HP Pavilion p6-2018hk)

Similar Questions

• Dual monitor on HP Pavilion p6610f

  I would use two monitors on my HP Pavilion p6610f desktop computer.  I have two lcd monitors.   I buy a vga adapter digital and connected a monitor to the VGA in the back of the computer and plugged the adapter connected to the other lcd screen in the digital output on the back of the computer. The monitor connected to the digital output signals no signal.

  Can I use a Setup dual monitor on a pavilion p6610f using video output that is on the motherboard, or do I need an additional video card?

  Thank you

  cardsinstl

  Hello

  The monitor which does not have a DVI port?  What make and model of the monitor does not work?

  Sending a digital signal to an analog monitor won't work.

• Graphics card dual monitor will fit in an HP Pavilion Slimline s3600z

  I need to run two monitors to my HP Pavilion Slimline s3600z.

  My OS is Windows Vista 64 bit.

  I'm not a gamer; I teach in virtual classes and need to spread out the screen on two monitors.

  My graphics card is NVIDIA GeForce 9300 GE.

  The card offers the ability to set multiple views, so I bought a splitter.

  Unfortunately, this does solve the problem.

  I bought a low profile with two connections graphics card, but it was too big for the case.

  Is there a card dual monitor low profile that fits the business slimline?

  Here are the specifications of your HP CTO Slimline s3600z desktop. According to specifications, your computer has a power of 160 watts. This power supply is unlikely to fuel a retail graphics card. The simplest method to use two screens with your computer is probably a adapter USB-to-video EVGA + 19.

  Frank

• Install WD Black2 Dual Drive on a Pavilion dv6t-7000

  Hello

  I recently bought a new internal hard drive for my HP Pavilion dv6t-7000 CTO Entertainment Notebook PC and have some difficulties to install the drivers for it. I bought a Western Digital Black2 Dual disc, which is a hybrid disk with 120 GB SSD and 1 TB of HARD drive, but I can't access the 1 TB because the installer for WD drivers keeps returning an error code.

  After much digging, I found documentation of the WD site that States the particualr error I received was due to one) the SATA mode to RAID in the BIOS, or b) an Intel driver a RAID reporting configuration. I can not check the BIOS settings myself, because the tab in the BIOS for this is hidden and locked down due to the fact that I'm working on a laptop of HP (I found answers on the forums for models with slightly different laptop computer that reported the AHCI is the default SATA for HP laptops) (, but unable to verify for my particular model). However, I was able to find an Intel driver that can cause the problem in the Device Manager. It is listed under 'Storage controllers' and is called 'Intel(r) ICH8M-E/ICH9M-E SATA RAID Controller '. When you contact the service customer of WD, the representative has tried to help me change this default Microsoft Inbox Driver by following the process: (right click > update driver software > Browse my computer... > choose from the list of device drivers). Unfortunately, it was not useful because the afforementioned Intel driver is the only one available. I was a bit puzzled by that because I installed windows 7 from scratch, only adding the drivers from the HP site needed to establish a wireless connection to download the installation of WD software.

  So basically I'm looking for help in these areas: a) to determine the particular my laptop model SATA mode, b) to understand why I have the default Microsoft Inbox Driver, c) installation of the Microsoft Inbox Driver default value or a Variant that works with AHCI, and/or d) any other course of action I could take additional troubleshooting.

  Operating system: Windows 7 Home Premium 64-bit (installation costs)

  Laptop model: HP Pavilion dv6t-7000 CTO Entertainment Notebook PC

  Hard disk: Western Digital Black2 Dual Drive

  Error: A bad SATA mode in the BIOS or reported by the Intel driver

  Pilot suspect: Intel(r) ICH8M-E/ICH9M-E SATA RAID Controller

  Thank you kindly,

  Gorkycreator

  This problem has been resolved in a more precise message than I did in the operating system of your laptop and drivers support forum.

  Here is the link:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-7-SATA-storage-driver-HP-Pavilion-DV6/TD-p/3970552

• Problems with dual monitor: VGA is out only work

  I have a dual monitor card galaxy geforce gf430 who worked on Sunday night before putting the computer to sleep. When I came back Wednesday on the side of the hdmi/vga/dvi vga worked the only possible output. After having checked all the settings and the cables and update of my computer, I had more than one screen. I went out and bought an asus hd 6450 and installed in the hope that I would have my screen. no luck I checked all the settings again and nothing. I ran the program provided with the card and so far nothing. It is not even read a different location for the screen. can someone please?
  Operating system
  MS Windows Vista Home Premium 32 bit SP2
  CENTRAL PROCESSING UNIT
  AMD Phenom X 3 8400 42 ° C
  Tolimán 65nm technology
  RAM
  1.50 GB Dual-Channel DDR2 @ 267 MHz (4-4-4-12)
  Motherboard
  ASUSTek Computer Inc. NARRA3 (Socket AM2) 44 ° c.
  Graphics
  Monitor Non Plug-and-Play generic (1024x768@60Hz)
  ASUS EAH6450 series (ASUStek Computer Inc.) 50 ° C
  Hard drives
  625 GB Western Digital WDC WD64 00AAKS-65A7B SCSI Disk Device (fiber)
  Optical drives
  ATAPI DVD A DH16A3L SCSI CdRom Device
  Audio
  Realtek High Definition Audio

  I took the liberty to do a little research on the ASUS HD 6450 map.  Are - what you got to get the ASUS HD6450 silent and low GPU or the bigger one with the fan?  It might be possible that those silent will not support Eyefinity technology since it was modeled for the home theater PC use.

  I noticed that the model with the fan on the radiator mentions he is compatible Eyefinity, while the silent model does not work, but it allows you to choose between a VGA, DVI or HDMI port, but do not use them simultaneously.

• Dual monitor crashing my computer

  Hello

  I am currently under a dual screen setup with my monitor and a separate screen. It seems to work fine for a while and then all of a sudden my computer will start to act up, and then it will go to the blue screen of death. A small window pop up at the bottom left says there is a problem with my video card driver, but I have updated their and still get the same problem.

  Info:

  Laptop - Toshiba Satellite M300 - 4 GB RAM - Vista Home Premium

  Screen - Samsung SyncMaster 245BW

  Graphics - ATI Mobility Radeon HD 3470 graphics card

  Also, I checked the information page on the ATI website for this video card, and they even state it supports dual monitor.

  
  

  Thanks in advance, Scott

  EDIT - if I remove the VGA cable connect my laptop on the screen while my computer crashes, it will return to normal after a second or two. However, if I try to plug it back in then it will take to crash my computer.

  Hello

  Could be hardware related if they update the video drivers would be way to start
  This troubleshooting. Don't forget to check the minidumps and the event viewer for more information
  and you can paste the relevant information in a message here by using the two utilities listed below. His
  possible controls of catalyst can be in the game, check with Support ATI and their forums
  for problems known.

  ATI - drivers
  http://support.AMD.com/us/gpudownload/pages/index.aspx

  ATI - Support
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ATI Catalyst drivers
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI/AMD forums
  http://forums.AMD.com/game/

  =======================================

  You may also check with the support from Toshiba and forums for known issues.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ===================================================
  ===================================================

  To solve the problems:

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
  This would help. Such as ITC and 4 others entered at the bottom left. And another error
  information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The main screen becomes secondary in a Setup dual monitor (DVI-HDMI)

  Original title: WINDOWS PROGRAMMERS: problem with OS Windows7 not being not able change the numbers of identifiers when using multiple screens and HDMI

  To be clear... This problem is with the Win7 OS - no video card GUI that allow to change number ID display on multiple monitors.

  Problem with several screens and the use of HDMI cables substituent and #1 assuming that for its corresponding display view identifier.

  Not always ID desired.

  But there is no way to change this.

  EXAMPLE:

  Monitor is configured as primary display (ID #1) using a DVI cable

  Then I connect my SONY Bravia or my LG HDTV displays using HDMI cables, the new screen automatically takes over as the display identifier #1 and the monitor becomes identifier #2.

  -This introduces to the identifiers is not something I want, need or want to deal with every time I use several displays. And it creates problems.

  There is NO way to correct or modify the identifiers.

  Please provide a FIX as soon as possible if you have an ounce of concern for the customer service.

  The solution can be as simple as:

  GO to THE control panel - appearance and customization - display - change display settings:

  Right CLICK... on one of the displays in the window to the left of "Detect" / "identify."

  Then the OPTION 'Change display login' with a list of relevant identifier numbers according to the number of multiple connected screens.

  Click 'apply '.

  CLICK ON 'OK '.

  and Voila! View identifiers are defined.

  WINDOWS:

  We, your customers, look forward to the difficulty of Windows update that contains this fix a lot expected and necessary.

  Thanks in advance for your collaboration and concerns about our satisfaction and ease of use than the loyal customers of your software.

  Feel free to send me the BETA version of the patch when his complete: * e-mail address is removed from the privacy *.

  Hi Jean-Pierre.

  Thank you for all the information related to the issue.

  This problem may occur if the display of the configuration settings dual monitor retain the configuration. Possible reasons could be installed on the computer outdated display driver.

  1. What is the brand and model of the computer or the graphics card?
  2. Are you using double display card? Sometimes changing the display settings for the display cards might solve the problem.

  First of all, if you have a display of the map or media panel installed on the computer, go to the control panel and change the setting under multiple display change. Assign the identity number according to the status monitor, then check if it retains the configuration when you restart the computer.

  Additionally, make sure that you have installed the latest version of the display driver for Windows 7 from the website of the manufacturer of the computer. Sometimes, if the driver is not being updated, the setting may not keep the entire installation. See the link to know how to update the driver on Windows 7:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Please keep us informed.

• Dual monitor problem

  I have a HP Pavilion p6733w-b desktop PC Bundle with 23 "monitor, AMD Phenom II X 2 511 Dual-Core processor and Windows 7 Home Premium, and I tried to connect my vs19 HP 19 inch LCD monitor to make a dual monitor, but each cord I never buy fits in ports at the back of the   HP Pavilion p6733w-b desktop computer . Is there still a rope out for me to do this work. Ive lost money on any cords 3-4

  Your computer has a DVI - D and VGA outputs, monitor HP 2311 x has HDMI, DVI and VGA inputs... and HP vs19 monitor that has a VGA input. The computer bundle should have come with a DVI and a VGA cable... Connect the DVI cable (more great shape of rectangle) of the computer on the monitor 2311 x and the VGA (more small "D" shaped of) cable between the computer and the vs19 monitor. That should be all you need.

  Plug;

  p6733w

  HP 2311 x

  HP vs19

  Frank

• Dual monitor problems / external

  I recently bought a netbook NB200/007 and want to use two monitors (mainly for display of pictures etc on larger screens)

  It came preloaded with Windows 7 starter, after having found that the Starter edition did not support dual monitor that I've upgraded to Windows 7 Home Premium, but I'm still not yet to make it work.

  When the external monitor is connected, the netbook picks it up and sets up two monitors, but the external screen does not light (it remains in standby mode) I tried several different resolutions and also tried to use the external monitor as a single screen by selecting the option to have it as my main screen.

  If anyone has a suggestion of how I could get it to work, I would greatly appreciate.

  Kind regards.

  Hi puma325,
  install the 'value added package.
  This will add some features like "Fn + F5" for switching the display...

• HP Pavilion 020na-300 Mini PC: connect two monitors for HP Pavilion 020na-300 Mini PC

  What are the options to connect two monitors for HP Pavilion 020na-300 Mini PC?

  1. do I need 2 x HDMI monitors? A DP HDMI monitor to use with different socket or adapter as well?

  2. How can I connect the 2nd to the 300-020na Mini PC HP Pavilion?

  RSFSS, welcome to the forum.

  Here's a guide that should help you with your problem.

  RSFSS wrote:
  

  What are the options to connect two monitors for HP Pavilion 020na-300 Mini PC?

  1. do I need 2 x HDMI monitors? A DP HDMI monitor to use with different socket or adapter as well?  If you do not already have the monitors, I definitel would get both of them with HDMI connectors.  You will need a DP to HDMI connector:

  http://www.Amazon.com/GP/product/B004C9QST2?gclid=CJDQqtv1rsoCFZBcfgodha4DDQ

  2. How can I connect the 2nd to the 300-020na Mini PC HP Pavilion?  The Guide I've provided assistance with this procedure.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Compaq dx2000 format Microtour - upgrading graphic support dual monitor?

  Hi, I have a question about the HP Compaq dx2000 format Microtour. The link to the form is here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&ContentType=support...

  I was asked to provide a solution for this machine that will support dual monitor. Can someone tell me please on a possible graphics card I buy (probably second-hand) that will be compatible with the motherboard on this machine and will also support dual monitor?

  Thank you very much!

  Paul

  Hello:

  If you only run XP and don't have no plan to upgrade to Windows Vista or Windows 7 and just VGA (not DVI) output, this PCI video card should work for you, and your machine has only PCI slots.

  http://www.eBay.com/ITM/PNY-nvidia-fx5200-Dual-VGA-DDR-256MB-video-card-PCI-/160704820819?PT=PCC_Video_TV_Cards&hash=item256ac0f653

  You will need to read the installation manual on the support page and the driver of your PC because I believe that you need to change a setting in the BIOS to the PCI card to the video card main.

  Or you can search for a similar PCI card with a DMS-59 output with video split cable that goes to two monitors.

  Paul

• E-mail and calendar will not connect on a dual monitor system.

  I have a MacBook Pro (15-inch, mid-2012) running on Yosemite 10.10.5.  I currently have a system of dual monitor hooked up with an Acer monitor (version: AL1916W Abd ~ Jan. 2008).  When I use this monitor as Desktop 2 and move my apps to email and calendar to this office, I suddenly find that mail will not receive any new messages very well and the calendar will often lose the connection and does not update to mobile.  I thought maybe of interference on the WiFi, but Google Chrome runs on the desktop at the same speed as on my laptop.  Perhaps it is still a form of interference, but I don't know what is the cause or how to fix it.  Perhaps the monitor is too old and now is not compatible with my operating system?  The monitor is connected with a VGA XAVIER to converter Thunderbolt and a VGA cable normal VGA.

  The internet I use is the internet at the University where I work, so reset the router or something like that is not an option.  Help?

  Please open the Mission control pane in system preferences and uncheck the box marked

  Viewers have separate spaces

  Log off or restart the computer.

• HP 251-a123w: I have a Setup dual monitor using VGA and DVI - D ports?

  I want to connect my HP 22uh monitor to my office using a DVI - D to DVI - D configuration.  Then I would like to complete a Setup dual monitor by connecting an Acer X193w monitor to my office using a VGA VGA configuration.

  Is this possible?  Two ports on my desktop computer can be used at the same time to support dual monitor?

  I see that the cables double monitor are in the form of Y and I thought that maybe a single port may be used simultaneously.  If someone knew this information then it would save some time & money on experimentation...

  Monitor HP 22uh was bundled with my new desktop PC and I cleaned the Acer to my now deceased Vista system.  It is in very good condition, would like to add.

  LSUfan71

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the use of the video taken two DVI and VGA and wanted to help.

  According to the technical specifications of HP for your PC, both of these jacks can be used at the same time.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Is it possible to run a 3rd monitor in my Pavilion dv8t

  Is it possible to run a 3rd monitor in my Pavilion dv8t

  Hey gogydog,

  You can have a maximum of 3 displays with this unit (depending on your configuration): a connected to HDMI, a connected VGA and LCD integrated Notepad. So, 2 external and 1 integrated display. It is not possible to connect 3 external displays, unless you use a third party (such as Matrox DualHead) material, however the quality/compatibility is not guaranteed.

• Dual monitor second dark screen

  I use a Setup dual monitor both monitors same accurate on my pc at the same time on the same exact settings and one of the screens is much darker that the other I tried switching on the cable with no result and have searched the Internet for the past hours searching for answers with no result, any help would be appreciated , I'm completely at a loss I'm 100% sure that it is not a monitor problem

  Hello

  The mother system/card manufacturer and support of the manufacturer of video cards and devices, online
  documentation and drivers and forums would be a good source of help and information.

  These should help:

  Connect the multiple monitor to your PC
  http://Windows.Microsoft.com/en-us/Windows-8/how-connect-multiple-monitors

  Do more with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-8/multiple-monitors

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">