HP Compaq dx2000 format Microtour - upgrading graphic support dual monitor?

Similar Questions

• HP Compaq dx2300 format microtour CPU Upgrade requires the bios update

  Hey, my Hp compaq dx2300 format microtour came with a core2duo E4400 processor, I had an E8400 CPU because they share the same socket LGA compatible on the motherboard and it fits perfectly, only the pc does not start, then read around some sites say it is supported by my MSI motherboard A 0, 90, others only reported up to E6700 what I don't understand, is why it wouldn't work? I BIOS v1.14 (latest news on the list of dated drivers '2008'!) and can't seem to find a solution for this, please tell me what to do I don't want to be stuck with a CPU, I can't use cause it isn't a way to map mother read it, thanks in advance!

  Hello:

  Unfortunately, you're stuck with an E8400 which won't work in this PC.  See page 4.

  Here are links to the quickspecs for your model.

  http://h18000.www1.HP.com/products/QuickSpecs/12668_na/12668_na.PDF

  An E8400 processor will not work in any case with x chipset Intel 94 or 96 x chipset.

  In order to run an E8400 into a PC, there need an Intel 3 series chipset or 4 of the series.

  Of course a processor must adapt to an outlet, but is not the only criterion needed to make it work.

• HP Compaq dx2300 format microtour missing PCI Simple Communications Controller Driver (Modem?). WinXP

  Hello

  I had to restore a HP Compaq dx2300 format microtour Win XP system from the recovery partition.

  Everything seemed to work fine except no driver found for PCI Simple communication controller.

  There was no modem in Device Manager.

  I downloaded the driver for the modem on the HP website, but it will not identify / install the driver.

  Remains of the error. (no driver found for PCI Simple communication controller.)

  Any Suggestions?

  Thanks in advance.

  My apologies to Paul.

  Your label says HP Expert 2014. I made a mistaken assumption that you were part of HP.

  I agree that it probably isn't a standard part of HP. I also looked at their specs and the database driver.
  I tried to use never version on the HP web site for their standard model for Agere 56 K PCI Modem driver. He did not consider it as one appropriate driver.

  However, I could only identify a compatible driver using a new pilot identifier utility (new to me at least).

  It seems to work.

  I think I'll keep it in my toolbox in the future.

  http://www.driveridentifier.com/

  My apolgoies once again and thank you for your efforts.

• Graphics card dual monitor will fit in an HP Pavilion Slimline s3600z

  I need to run two monitors to my HP Pavilion Slimline s3600z.

  My OS is Windows Vista 64 bit.

  I'm not a gamer; I teach in virtual classes and need to spread out the screen on two monitors.

  My graphics card is NVIDIA GeForce 9300 GE.

  The card offers the ability to set multiple views, so I bought a splitter.

  Unfortunately, this does solve the problem.

  I bought a low profile with two connections graphics card, but it was too big for the case.

  Is there a card dual monitor low profile that fits the business slimline?

  Here are the specifications of your HP CTO Slimline s3600z desktop. According to specifications, your computer has a power of 160 watts. This power supply is unlikely to fuel a retail graphics card. The simplest method to use two screens with your computer is probably a adapter USB-to-video EVGA + 19.

  Frank

• Supported dual monitor on a virtual machine

  I've recently started working with VM.  One of my first tasks is to improve close Citrix to raise more than two servers citrix virtualization.  What I've done.  It works fine too, but some people began to ask questions on two monitors.  99% of my environment is managed by thinclients.  I have not found is when a user is connected to one of the physical citrix servers there is no problem with the double screens, but when they are saved in one of the citrix virtual servers the bi-ecrans is as if it were a screen instead of a true dual monitor.  Is it possible to configure the virtual machine to support two monitors.  I tried to change the settings of the machine under the video card, but when I change to support 2 monitors, and then click OK, it it changes just back to one.  Someone at - it guidance on how this could be done or if I am barking the wrong tree?

  Help us those in need, so when we are in need we will be assisted.  Isn't this what computer scientists are for.

  your best bet on that is going to be the 3rd party.  Another use of the/span option in RDP, you may want to look something like http://www.splitview.com/

• Compaq dc5800 format microtour: Compaq dc5800 format microtour - 4 TB hard

  I bought a 4 TB harddrive and installed in a HP Compaq dc5800 microtour.

  The drive is recognized by the computer, but in the BIOS indicates that the capacity of the disk is just 1.8 to.

  I checked all BIOS storage options and doesn't see any clear way to solve this problem.

  Is it possible to do?

  Hello:

  If you use it as a main drive, it won't work because your PC lacks a UEFI BIOS.

  The maximum size of hard drive, you can install a HARD primary as 2 TB in your model drive.

  If you use it as a secondary disk (storage), you should be able to format in GPT to use all 4 to.

  Read this white paper from HP on TPG...

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3658081&docid=emr_na-c02826744&docLocale=en_US

• HP Compaq dx2300 format microtour

  I have a HP Compaq dx2300 microtour with the following BIOS:
  Phoenix Technologies, LTD MS7336 1.08, 25/05/2007

  I want to upgrade BIOS, but apparently there are no BIOS version unless
  you are running Windows 2000, XP and Vista.
  Since I have Windows 7 installed and working, can someone point me to an update of the BIOS
  It works on my computer?

  Thank you.

  Xlator1, welcome to the forum.

  The only way that you can update the BIOS is to return the computer to its original configuration. including the operating system.  I don't think that HP will be an update of the BIOS for Windows 7, if there is not a list currently.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Compaq d220 format microtour Desktop PC Ethernet Controller does not work?

  Hi, I just reinstalled my microtour HP Compaq d220 with Windows Xp Professional desktop PC and I downloaded the chipset in the system first and then audio driver and the driver of network here: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...

  I went into Device Manager but my ethernet controller was still in others? My internet was not working and I can't access my router? I don't what to do. I lost all my Sunday looking for answers. Can someone help me out here?

  Message edited by foos-special on 22/11/2009 23:23

  Hello.

  Today, I had this same problem with a d220 MT (in fact, I found this entry when you seek a solution ), and the fix was so simple it was embarrassing. The driver download sp25326.exe install just the installer. After you run it, you must go to c:\swsetup\sp25326 and run setup.exe. After that, your card should work. at least it worked for me.

  I hope this helps.

• HP COMPAQ DX2400 FORMAT MICROTOUR: DEVICE DRIVER?

  Hello and thank you,

  I inherited a model above for a friend and he has deleted his personal affair, I installed some of my favorite softwear but found some of them would not work properly, I discovered some the device drivers have had a yellow?, indecating a probem pilot,.

  ? Ethernet controller

  ? PCI device

  ? SM bus controller

  ? Video controller (VGA compatible)

  I reinstalled the operating system, W xp pro and downloaded and installed some drivers from the internet, without sucsses can someone help me with that, would be a very full schedule, thank you.

  Bert (personal information by moderator)

  Hi, Bert:

  See if these drivers work...

  First install the smbus controller driver and restart.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3658380&swItemId=ir_57823_1&swEnvOid=1093

  Video: This driver is for the integrated Intel graphics card.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3658380&swItemId=vc_64688_1&swEnvOid=1093

  Ethernet:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3658380&swItemId=vc_97701_1&swEnvOid=1093

  I need the hardware ID of the PCI device to see which driver it needs...

  To find the hardware ID, you must have XP SP2 or SP3 installed.

  Go to Device Manager and click the PCI device needing drivers.

  Then click on the Details tab in the upper part of the PCI device window.

  You should now see a string of characters that start with PCI\VEN.

  After this string of characters.

• HP Compaq dx2200, format microtour

  When I turn on the computer I get a message that the computer was turned off for a reason any and enter one of the three messages as safe (one of three messages) mode when clicking on safe mode, all I get is blue screen of Windows XP with the wriggles along.   I had installed Skype a few days before - the computer worked after that.    What should I do next?   My grandson wants out of my hard drive to put all of my data and photos on this computer, reinstall windows and then transferring into my computer.    It would be a good idea?

  Hope someone can help and will be able to understand my description of the problem.

  I'll click on the Kudu when I can find it.   Thanks for the email, old_geekster.    The other two choices were: Safe Mode with networking Mode and safe mode with command prompt.

• Supported dual monitor, Dell Dimension C521

  I am trying to upgrade my Dell Dimension C521 to enable bi-ecrans support.  My first approach was to buy a video card, hoping to use the VGA integrated with a low end ATI video card in the Slot PCI - E.  While the video card is well worked, by using the onboard VGA in conjunction with a video card is an "unsupported configuration". It is either / or situation, which means that a monitor at the same time.

  My second approach is to get a KFA2 GeForce 8400 GS graphics card, which seems to be one of the few that can be used in a low profile CPU and have a DVI and a VGA output. The problem, they do not work.  I say they, because I already tried two, and they both fail the same way: the computer seems to start up, but it is no output to the DVI cable.  If I plug the VGA cable and not on the DVI cable to the monitor, I just get a bunch of vertical lines on the monitor. I talked to a KFA technical support, although at first, they thought it would be a bad video card, they now think it might be related to the fact that power 280W does not meet the requirements of the Commission, which needs a minimum of a supply of 350W.

  It seems to me that there are a few options left:

  (1) find a video of lower power of cards that has two * real * outputs - DVI and VGA - (and not only replicated TV output). It will also take a low profile video card.  Any suggestions would be greatly appreciated.

  (2) upgrade of power supply 350W or more and use the 8400 GS graphics card. Unfortunately, Dell does not appear to make a more powerful PSU for the C521.  Is there power supplies for another half height Dell computers that might work?

  (3) as a last resort, a ditch the C521 and buy a more powerful computer.

  Are there options that I left out?

  Message edited by DrJJH on 09/23/2008 13:07
  
  

• Yes or not - is VMware Fusion 3.1 support dual monitors in Windows 7 x 64?

  I want just a definitive answer or no two monitors will work in a Windows 7 64 bit guest.

  I am running 3.0.2 and two monitors do not work properly in Windows 7 64 bit - the second monitor is displayed but I can't drag windows or with the right button on the extended desktop.  This feature works as expected in 32-bit Windows XP SP3.

  EDIT: I refer to the mode full screen. I'm not interested in the unit or any other mode (although, curiously, the unit has the same bug).

  david01010, jrreedy16: two things to check off the top of my head: are you sure tools are updated and installed correctly (for example uninstall tools, restart the comments necessary, install tools) and you have a third party mouse (or other entry) drivers installed in the comments or on the host?

• Onboard video Inspiron 660 supports two monitors?

  Hello

  I just got a new 660 Insipron and wasn't able to set up two monitors with the integrated video card. I have connected a monitor via the VGA to VGA-in output and the other by the HDMI to DVI-in via a converter. I can get video with output VGA or HDMI-out single, but not both. Is it because that the integrated video card do support a monitor at the same time? Thank you.

  arborglen

  Hi Arborglen,

  Welcome to the Dell Community.

  I understand that you are however technically it is not possible to set up two monitors with the integrated video card. If you want to configure dual monitor with the computer, and then you add a graphics card with support dual monitor to get the functionality.

  Answer please if you have any questions.

  Thank you best regards &,.

  Dell_Appu_S

  Dell social media autoresponder reference

  http://www.Facebook.com/Dell

  https://Twitter.com/DellCares

• HP compaq dc5700 microtour: graphics card for hp compaq dc 5700 format microtour

  Hi Mexico.i have a hp compaq dc 5700 microtour and I would like to know what graphics card is compatible, I want to buy a named Nvidia Zotac Gt610 Ddr3 2 GB compatible PCI express x 1 graphics card, but I don't know if my desktop is supported by this graphics card
  
  Care of real desktop
  Micro processor: Intel® Core™ 2 Duo processor E6600
  (2.40 GHz front side bus at 1066 MHz, 4 MB Cache)

  [I have change the processor]
  
  RAM: 7 GB
  
  But my pc slow
  
  I need whether or not the nvidia zotac gt610 graphics card is compatible with this pc? reason why I want to buy it today

  I can't say with 100% accuracy it will work, but given that HP lists the NVIDIA GF 8400GS 256 MB dual head adapter (PCIe x 1) card chart as supported, I don't see why wouldn't the map you posted.

  It should work perfectly, IMO.

• Updating BIOS for motherboard Μatx-IG41-H on format Microtour Compaq 500 b

  OK, here's my problem;

  I just bought a 4GB Ram DDR3 1333 Mhz Kingston for my computer format Microtour Compaq 500 b. But when I try to connect this new RAM for my motherboard, pc gives error of RAM and that it does not open.

  It works well with other computers.

  Support members told me to update my Bios, but I can't find any update file which is updated. The only thing I could find is the following; http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = HR & prodTypeId = 12...

  I hope someone can help me with this.

  Thanks in advance...

  Here is the HP Compaq Business Desktop ROMPaq Firmware (ROM family CPT006) aka BIOS downloads for HP/Compaq 500 b/510 MT Professional computer. These BIOS/firmware updates do not appear to address any memory related questions. HP/Compaq 5xxB MT maintenance & Service Guide;

  Memory:
  The computer comes with synchronous dynamic RAM 3 double rate
  (DDR3-SDRAM) dual inline memory modules (DIMMS).
  DIMM DDR3-SDRAM:
  Media memory on the system card can be filled with up to two industry standards
  DIMMs. These media memory are filled with at least one DIMM preinstalled. To achieve the
  maximum memory support, that you can fill out the card system with up to 4 GB memory
  configured in a high-performance dual channel mode.
  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:
  240 industry standard pins
  unbuffered PC3 - 10600 1333 MHz compatible
  DIMM DDR3-SDRAM 1.5 volts
  DIMM DDR3-SDRAM strips must also:
  support the latency CASE 9 DDR3 1333 Mhz (9-9-9 calendar)
  contain the compulsory particulars of the JEDEC SPD
  In addition, the computer supports:
  512Mbit, 1Gbit and 2 GB non - ECC memory technology
  front and double-sided DIMMs
  DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not
  support
  NOTE: The system will not work properly if you install unsupported DIMM modules.

  The total State "up to 4 GB' plug... which is in both slots, therefore each slot can only use a 2 GB DIMM.