Dump failure, JOverflow full of problems for me of the heap

Similar Questions

• How can I get my computer out of fashion without failure - has been a problem for a month.

  I have bin trying for almost a month to escape to the Safe Mode.  How can I recover my computer? Please give me advice.

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• clean install of Vista on an old drive hard ide after drive failure hard sata - oem version now get "the limited functionality" due to "unauthorized changes" had no problems for 3 years until this!

  I did a clean install of vista on an old drive hard ide after the disk sata hard down - (oem version) now get "feature limited" because of the "unauthorized modification" had no problems for 3 years until this!

  Hello

  It's a shame you don't know the exact name of the virus

  Malware can cause non-genuine messages appear

  but try this:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Failure to update Windows 8 for the error Code Windows 8.1 - 0xC1900101 - 0-x 20040017

  iBuypower CZ-27

  Intel i7 4700MQ 2.4

  16 GB OF RAM

  1 TB HD

  128G SSD

  NVIDIA GTX 770 m

  Windows 8 x64bit

  A to the factory restore update my PC after an Avast anti-virus on reboot it crashed. I did the factory reset and installed the drivers directly from ibuypower.com via the USB port of my specific model. A driver could not install [ACPI/ENE0110] which appears as unidentified driver. I know that Nvidia GPU cause problems, so I made the driver is up-to-date. I don't have a program of keyboard/mouse Steelseries which is not supported by 8.1, and TrustterRapport. I don't have ESET anti-virus (although I have avast).

  I tried to disable all non-microsoft startup programs as suggested in a previous post that make me the problem [not even system partition] (I forgot the whole sentence) message.

  I really am having problems with this and am also looking for a solution to this unknown device driver.

  If anyone has any idea please help = ((un propriétaire de PC tous ma vie et ne voulant pas laisser ce problème dans la voie de mon bébé et moi; p))

  Thank you very much!

  Shifted

  Hello shifted,

  Welcome to Microsoft Community forum.

  This error indicates a boot failure Windows 8.1 has occurred during the final parts of the update, System Restore Windows 8.  The most likely cause of this error is a material defect or incompatible driver. Unfortunately, due to the timing of this failure, there often are no newspaper, dumps or other diagnostic information available to study the question easily, making it difficult to determine which, if any, of the system or components drivers cause the update fails.

  For more information I suggest you follow the suggestion provided by Madeni K N replied on 8 January 2014 in the following thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/error-0xc1900101-0x40017-when-installing-Windows/8c893ae6-0e9b-4b7d-a647-b9065099efd6

  If you are unable to upgrade to 8.1 Windows after trying the steps in the thread that above, I suggest trying the steps by Vivian Samartha responded on April 12, 2014 in the following thread and see if it works for you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/kb2919355-Windows-81-update-fails-800f0092-and/4d4d23a3-695a-4bd4-B340-d2ce9c75919d

  If the problem persists after trying the above steps, I'll ask to follow the steps given by David Williams Dixon in the Blog below.

  Something happened and the 8.1 Windows installation may not be completed. (And now you are bored)

  We know if the steps help you in upgrading the computer to Windows 8.1.

  Kind regards.

• After leaving the House, ready to shut down my computer, I suddenly started to get ads full page on screen for everything under the Sun.

  I remove home page ready to shut down the computer. On the screen is an ad full page, always different and unrelated to Web sites I visited. He only started recently.

  Looks like a dose of Malware.

  Install, update and run these programs in this order. They are listed in order of efficiency.
  (Not all programs to detect malware, you may need to run them all to solve your problem.)
  These programs are provided free for personal use, but some have limited functionality in "free" mode - but these are the features that you really need not to find and eliminate the problem you have.
  
  Note: If your malware infection is bad enough and you're poorly led to URLS other than what is displayed, you may need to use another PC to download these programs and use a USB stick for transfer to the afflicted PC.

  Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
  
  SuperAntispyware - http://www.superantispyware.com/
  
  AdAware - http://www.lavasoftusa.com/software/adaware/
  
  Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
  
  Windows Defender: Home Page - http://www.microsoft.com/windows/prod.../default.mspx
  
  In addition, if you have a re-direct search engine problem, see this:
  
  http://deletemalware.blogspot.com/2010/02/remove-Google-redirect-virus.html

  If they can't find it or cannot delete it, post in one of these forums using specialized malware removal:
  
  http://www.spywarewarrior.com/index.php
  
  http://Forum.aumha.org/
  
  http://www.spywareinfoforum.com/
  
  http://bleepingcomputer.com

• El Capitan is always full of problems?

  Looks like El Capitan's full of problems still? I want to improve, but I'm quite scared!

  What problems are you talking about? I've been running El Capitan for just a short time after that he was released and have no problems, as have many, many other users. So, unless you specify what it is that you are worried, then nobody can possibly provide you with any information.

  See you soon,.

  GB

• Full software functionality for Windows 7 missing functions HP2610

  MFP HP2610, Windows 7

  Installed last full feature printer software from HP website.

  Problems:

  1. I wanted to send a fax from the computer but couldn't find controls cover page to put a message on the cover page.

  2. There is no Preview Fax button.

  3 quality fax options are low, medium and high, but not the quality picture, even if assistance says there should be a Photo quality option.

  4. how to import addresses? Aid is said to use the address book in Internet Explorer, but IE is not an address book.

  It tells me that the Windows 7 driver for this printer is very disabled compared to XP driver that has these features. HP Director software which is running XP is also unavailable, is there a download for HP Director?

  Hello

  Some of the features HP full feature has changed:

  Regarding your 1st question, the page function Fax coverage provided is no longer, since version 7 of the HP Solution Center software.

  Overview of Fax option is no longer available for newer models with the center of Solutio HP as well.

  So, by testing the newer models, the highest quality of Fax listed as high.

  As for question 4, the address book relies on Windows Contact:

  1. Click the Start button
  2. Type of Contacts in the search bar, you will find the Contacts application
  3. Follow these steps to import contacts:
     http://Windows.Microsoft.com/en-us/Windows-Vista/import-export-or-change-the-format-for-contacts

  HP Director is not compatible with Windows7, the HP Solution Center is the only version available for your printer for Windows 7.

  Kind regards

  Shlomi

• LaserJet full Scrub steps for no HP computers only

  When you uninstall the HP, not all components printing software is uninstalled.  This can block a resettlement, or prevent a problem solved.  In this case, you will need to do a complete scrub of the software of the printer from the system.  Here are the steps for software Non-HP computers Laserjet scrubbin.  If you use the following steps on a HP computer, you run the risk of deleting important computer components.

  LaserJet full uninstall steps for No HP computers:

  1. Click on the Start Menu.
  2. Click on Control Panel.
  3. Open Add or remove programs.
  4. Delete all HP software.
  5. Click on the Start Menu.
  6. Click devices and printers.
  7. Right click on your printer.
  8. Select remove device.
  9. Select any printer in the folder.
  10. Click on server properties in the upper part of the window.
  11. Click the tab drivers.
  12. Remove all instances of the printer in the list.
  13. Click on the start menu.
  14. Click computer / my computer.
  15. Right-click on the C: drive.
  16. Select Properties.
  17. Click Disk Cleanup.
  18. Once disk cleanup is done scanning, ensure that all options are selected.
  19. Click OK.
  20. Click on delete files if requested.
  21. Restart the computer.
  22. Access to program files.
  23. Remove all HP/Hewlett Packard folders.
  24. For 64-bit computers, access program (x 86)
  25. Remove all HP/Hewlett Packard folders.
  26. Click on the start menu.
  27. Click run.
  28. Type %appdata%\microsoft\windows\sendto in the Run dialog box and click OK.
  29. Remove all HP/Hewlett Packard folders.
  30. Click on the start menu.
  31. Click run.
  32. Programdata % in the Run dialog box and click OK.  Note: This location will there be in Windows Vista and above.
  33. Remove all HP/Hewlett Packard folders.
  34. Click on the start menu.
  35. Click run.
  36. Type regedit in the Run dialog box and click OK.
  37. Remove any HP/Hewlett Packard folders or the registry keys.
  38. Restart the computer.
  39. Follow steps 13-20 to do a disk cleanup.
  40. Download and install the latest version of Adobe flash player

      http://www.Adobe.com/support/flashplayer/downloads.html

  41. Use this tool to clean the system and the registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damage or loss of data caused by the utility.  This step is optional.   You can skip if you want.

      http://download.CNET.com/advanced-SystemCare/3000-2086_4-10407614.HTML?part=DL-6271865&Subj=DL&tag=b...

  42. Download the drivers and full software features on the HP Support Site.

      http://WWW8.HP.com/us/en/support-drivers.html

  43. Start the installation.

  I hope this helps.

• I had this problem for a few days now, everytime I turn on my computer, it immediately goes into recovery.

  OK, so I've had this problem for a few days now, everytime I turn on my computer, it immediately goes into recovery.

  It says: "Please choose an option:

  Start the repair Microsoft Windows environment

  Reinstall Windows

  Advanced options

  "Exit and restart the computer"

  I tried all the options, the demand for my keyboard and language input method, and then he says: "use recovery tools that can help solve the problems of Windows startup. Select an operating system to repair. If your operating system isn't listening, click Load Drivers and then install the drivers for your hard drives. »

  There is no operating system listed and when I click Load Drivers, everything that happens is a folder called "System32".

  There is another option, which is "Restore your computer using a system image you created earlier."

  This does not work either.

  So now the second option has two ways to sort, 'Start Windows System Restore' I tried before and now does not work. There are also "Start Full destructive recovery" which I also tried, but there passed the first hurdle, even if she says it should take 30 to 60 minutes.

  Advanced Options I can't use, because I'm not a user of advanced computing. It offers 3 options, although "Chkdsk", "Notepad" and "Command Prompt".

  Even when I put in the Windows 7 disc, it does nothing.

  This has all started after I had a few problems with the Sims 4 and since I changed my keyboard, but I don't know that could be the problem.

  Hello

  Thank you for the update.

  You can use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)

  • A boot sector

  • A Boot Configuration data (BCD) store

    Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

    
    Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  Let us know the results.

• New Member has exactly * a * problem for a long time with system! ***

  first of all, I want to say hello to everyone... I just registered today... actually I just discovered today these forums exist even ;^>

  Features: 6 months ago I bought a HP Pavilion a6600f... I love it and have bought things for her from the beginning... find it me easy to use and * beep * hard to turn off ;^> I always check to make sure that I have the latest drivers for everything, cleaning the registry, etc..

  I had exactly * one * problem for the last few months and it's bugging me enough now to do something.

  System details: the bureau a6600f Pavilion has a Pentium dual core E2200 clocked at 2.2 GHz... I put 4 GB of memory in it, and it runs Vista Home Premium w/Service Pack 1 (64-bit).  the rest is probably not important to this question.

  QUESTION: when I opened the health security & in the hp Advisor, I always have yellow exclamation in a triangle "PC Update," and also a exclamation point red in a square under "PC Health".  both are caused by the same problem... the fact that I continue to say there is a new version of the "HP health check' and I need to download/install.

  problem is that I can't do.  Here is what I get.

  at first, everything seems fine.  He considers it, download it (it's about 13 MB), and I get the message 'the active support HP library configure your new installation of the software.  * That's * where the problems begin.  I get:

  «HP Active Support Library error: Error 1316.» "A network error occurred while trying to read him comes from the file C:\windows\installer\HP Library.msi of active support" (note: I checked and I don't even have this file present in C:\windows\installer... that's the problem?)

  then I get "roll back the installation.

  and finally, "error:-1603 Fatal error during installation."  Consult the help of Windows Installer (msi.chm) or MSDN for more information"

  so I can't update the HP health check and I still have these two errors (the yellow triangle and red square) present in HP CAW - PC Health & Security.

  I searched these forums and found a few issues related to the CAW of HP, and I understand that some people even turn off... but it never gave me a problem outside of it, and I want to keep around if I can.

  I'm sorry if this post is on the long side, but I wanted to provide as much information as I could.

  so, my name is Michael King and I hope to be a regular contributor here, and I don' t mind if someone wants to email me, although I understand problems of this kind are better publicly displayed where they benefit from the community as a whole.

  Thank you

  -MK

  Message edited by Michael_King on 05/16/2009 20:06

  first of all, I would like to thank the three of you who tried to help me with this problem.  This means that you, dmhoo29, anon, MrFixIt.  and as a gesture of goodwill, I would like to give Kudos to you, being a new Member and all three.

  you all had great suggestions, and based on these suggestions, I tried a few variations based on these suggestions.  Unfortunately, nothing has worked... She is always back to the same error messages, no matter what I did.

  In fact... HP * own * suggestion... which is essentially reproduced in this thread... does not work either.

  I had already spent hours on this ridiculous thing, and tonight I spent 3 hours on the subject.  I finally solved it, and the solution may benefit others who I see can easily run through a similar problem with other improvements... BECAUSE THE PROBLEM IS A RIDICULOUS OVERSIGHT ON THE PART OF HP that we can correct easily manually.

  THE SOLUTION

  What annoyed me early on, was the fact that I kept getting the message about the "HP Active Support Library.msi" file, which was looking for the installer in C:\Windows\Installer.  It seemed to me that the real problem was that he was looking for a file that simply wasn't there.

  Well, during my hours 3 screwing around with tonight, guess what I found?

  There's a right called "swsetup" subdirectory under the root of the C:\ drive.  and inside C:\swsetup, I found the following two subdirectories:

  C:\swsetup\sp36082 - and -.

  C:\swsetup\sp41377

  I knew of the many, many times I tried update HP Health Check that he was downloading sp41377. (don't remember the extension) via FTP from HP.  so I checked what was in C:\swsetup\sp41377 and guess what I found?  Well, a few things, but the only thing that concerns us is (drum roll please) THE FILE "HP ACTIVE SUPPORT LIBRARY. MSI!

  simply, I opened another window, surfed to C:\Windows\Installer and drag-and - drop "HP Active Support Library.msi" here (I pressed the 'Ctrl' key in order to make a copy of it rather than a civil rights movement).

  so now I had this annoying file in the right directory.  so, since my C:\swsetup\sp41377 window was still open, and since there is a file 'setup.exe' in there, I ran it.

  and the Holy Mother of God, it has actually worked.

  which means that what had happened was, when I tried to update the health check, that would create a subdirectory in C:\swsetup... in this case the C:\swsetup\sp41377 subdirectory... all he needed for the update here... and then ran "setup.exe" dump...

  . . except that the HP person who wrote 'setup.exe' forgot to include an itty-bitty statement in the code...

  to copy 'HP Active Support Library.msi' in the C:\Windows\Installer directory first.

  then pay attention to that sort of thing, my friends... If you try to update this HP wrote and that you get a 'cannot find file such and such in such and such directory' type of error msg, see if you can locate on your hard drive... maybe in C:\swsetup, perhaps elsewhere, I know... and if you find, just manually copy it in the required directory and run Setup again.  This might be the only time where HP committed this Sin right; ^ >... or even once, it cannot!

  Bravo and thank you again to all who have contributed.

  -Michael King

  Message edited by Michael_King on 05/17/2009 23:37

• SOLVED: Computer laptop Windows 7 Home 64 bit has lost network connection (worked without problem for more than a year)

  I have laptop computer power and the router without effect recycled

  There is the same problem with the laptop turned off firewall.

  Connection failed even when using the ethernet cable.

  Can not ping router (return message is "General failure"), but can ping 127.0.0.1
  Router computer shows as connected and my other computer (Vista) sees the computer on a network card but cannot ping it.
  Last internet connection was August 28, Windows software was last updated was on 16 August.

  Hi Muzzy,

  The link to the winsock corruption was helpful - the symptoms were bad for my problem, but searching on the support site, I found these two similar problem reports (I did not find earlier because I had not looked for to Ping General Failure):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/my-laptop-cant-access-the-Internet/0abbae1f-E195-46EB-831b-3958d3cb6d30

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/ping-General-failure-to-Internet-intermittent-and/964e959b-ec91-43DC-a5ec-f97240050a4f

  I restarted my laptop in SafeMode with networking and the problem fixed itself - I guess there was a software conflict or an internal configuration had got out of sync.

  Thank you for taking the time to remedy to this - I would not have found the answer without you.

  Phil

• Adobe Application Manager corrupt - are trying to install the new copy will fail because the AAM is missing according to dump record installation - how to fix this chicken in the egg problem?

  Adobe Application Manager is corrupt and allows a reinstallation try Fail Adobe Acrobat Pro XI - try to install the new copy of the AAM fails because the AAM is missing according to dump record installation - how to fix this chicken in the egg problem?

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | Build Version - 9.0.0.244

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | Exploitation forest verbosity level set to 4

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | CREATING Instance PIM...

  06/04/16 16:23:29:507. [FATAL] |  | USS | PIM | PIM |  |  | 6256 | Detected db journal file, Adobe Application Manager is in a State damaged to C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp

  06/04/16 16:23:29:507. [FATAL] |  | USS | PIM | PIM |  |  | 6256 | Adobe Application Manager is needed to solve this problem. However, it is missing or damaged.

  Download a new copy of Adobe Application Manager of http://www.Adobe.com ,

  or re install this product.

  06/04/16 16:23:29:507. [FATAL] |  | USS | The installation program. The installation program.  |  | 6256 | Cannot create the PIM item

  06/04/16 16:23:29:507. [INFO] |  | USS | The installation program.  |  |  | 6256 | Event generated Guid is: "986b04a2-3099-49fd-9067-df69c36ff2b2."

  06/04/16 16:23:29:507. [INFO] |  | USS | The installation program.  |  |  | 6256 | Event generated Guid is: "e5f02581-649c-49ec-a265-800eeb5ad426."

  Does anyone have an idea what to do? I use Windows 7 as operating system

  Hi Ruedigerd91465945,

  Well try download and install Adobe Application manager from here: Adobe - Adobe Application Manager: For Windows: Adobe Application Manager: thank you

  Before installing kindly, restart the machine and then rename the folder in C:\Program Files (x 86) OOBE \Common Files\Adobe\OOBE\PDApp as OOBE_OLD

  Let us know if that helps.

• Failure of the initial installation of INS-30131 required for execution of the controls of the installer cannot access the temporary location

  When I install Oracle Grid Infrastructure 12 c Release 1 (12.1.0.1.0), I have the following error:

  Failure of the initial installation of INS-30131 required for execution of the controls of the installer cannot access the temporary location

  Cause:-unable to access the temporary location

  Action - make sure that the current user has required permissions to the temporary location

  Details of the addition

  -GLWB-1560: "/tmp/" temporary directory path is shared on the nodes '... »

  The oracle user I use is to have access in / tmp, I did a test by creating a file here.

  Any idea?

  Thank you

  This is the description of the error, I saw, but he was trying to find an idea how to solve this problem.

  Anyway, I solved it by renaming the Group of volumes and accordingly update the fstab and the grub.conf.

  Thank you

  Eugen

• I had to uninstall Acrobat Reader DC and back to Acrobat Reader 11 for software we use for work.  The problem is that after I did my Internet Explorer gives a message that the plugin player DC is missing?  I reinstalled DC and uninstalled again with

  I had to uninstall Acrobat Reader DC and back to Acrobat Reader 11 for software we use for work.  The problem is that after I did my Internet Explorer gives a message that the plugin player DC is missing?  I reinstalled DC and uninstalled again without success.  Any suggestion would be appreciated.

  You can try to use this tool first remove all traces of your computer:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then you can download the full Setup offline reader for the version you want from

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

• How gemfire locator can be configured to return the full DNS name for the customer?

  We have an index running before 2 cache servers,

  Locator.DomainA == > Server1.DomainA, Server2.DomainA.

  the problem is when the customer (customer. DomainB) try to access gemfire via locator, it up ' get: not connected to GemFire' exception, the reason is that the Client.DomainB uses the full name "Locator.DomainA" to access the gemfire, the Locator maintains only the servers host name, when the client runs the query, it access Server1 or Server2, but in this case, the networking is not connected.

  How gemfire locator can be configured to return the full DNS name for the customer?

  in gemfire.properties, Locator attribute is full domain name already.

  Thank you

  Yao

  There is a parameter for hostname for the customers that you can put in your cache.xml file cache-server element. It is a string that is passed the server for the location, and then on the Locator for the customer. You must set this client-to-host name in each of your cache servers.