Duplicate Audio track?

I don't know if I accidentally did something, but now all my images has two audio tracks (duplicate). A track is cut and other assets. Any ideas how and why this is?

Thanks for the update. To mute / mute audio channels in prelude just click the track header speaker icon

Kind regards

Michael

Tags: Adobe Prelude

Similar Questions

  • Duplicate and synchronize a mono audio track?

    I went just from FCP7 to body of CS5.5.

    When I was at the FCC, I used to do an OPTION/SHIFT on my Mac key board and drag audio mono for the next down

    and it would overlap with the audio track.

    Then I have should highlight both and synchronize them together so if I moved the volume or have you keyframing on a track, it would be

    relate to other audio track.

    Is there any way to quickly do the same in the BODY?

    In accordance with my 1st question, I mentioned that I was new to the ORGANIZATION and that he just had a revelation to the Commission of the mixer. Very cool, how you can transform each mono track to the left and right speakers.

    So I don't have to do what we used to do at the FCC.

  • Can I copy the levels of the Audio Track mixer to a new sequence?

    I have a complete sequence ready to export with the dialogue, music, etc. all set correctly in the mixing of Audio tracks. I need to create an identical version of the task from another language is connected. Is it possible to copy on these levels I put from the first footage, so I don't have to manually adjust all again one by one?

    Duplicate the sequence and replace the audio clips.

  • Copy and paste audio track MIX from one track to the other?

    Hello

    What is the best way to handle this.

    I have a video with a long song, that I've mixed using Audio Mixer in Adobe Premiere.

    The musician made a new version of the track with some very minor changes in the music.

    Rather I would have preferred to have to remix the brand new track, either:

    (1) copy and paste the attributes of the original audio track on the new music track - keeping mixture I made of the original mixture.  Is this possible?  I tried once and it doesn't seem to work.  (I used the mixer, not the keyframes, make the mixture.)

    or

    (2) is there a layout mixer Audio of first of the new track with the old - the new track of cloning of mixture of the old track of "gang".

    Or would it be better to introduce the two audio tracks into Soundbooth and he do?

    Thank you

    ... Rowby

    Can you be more specific about what it is that you want to keep? Is it follow the effects applied to the mixer? If so, those can be copied and pasted - it is a tedious process of reconstruction. Don't copy and paste track keyframes is (clip keyframes do).

    However here's a potential solution: simply replace the original audio clip by the new. I would suggest to duplicate your sequence first, and then drag the new audio clip to the sequence, place the clip on the original audio clip, hold down the Alt key and release the mouse button. This will be a replacement, maintain the original mixture. You can also use the Alt + Shift keys to make a replacement frame match, which would be a good thing if you have changed the duration of the source clip in the sequence. In both cases, you do not have to do much to tweak the mixture; This assumes, of course, that music is the same duration, etc.

  • removed the audio tracks in logic pro can be restored

    removed the audio tracks in logic pro can be restored, has been save logic & empty folders to the folder came, I deleted the originals by mistake...

    Not if you don't have the original audio files on your hard drive.  If you have deleted original, your only hope he then restore from a backup of your system, you have a.

  • No display on the audio track

    Probably something stupid I'm do or do not do... but I saved a piece of Hammond organ on an audio track in Logic Pro X. For some reason but there is no display on the console when playing track. The track renders perfectly, but the meter section remains black.

    Any ideas why this might be?

    Thank you

    Paul

    After you restart the computer several times the problem seems to have taken care of itself. Go figure!

  • Compressor and Equalizer audio tracks automatically?

    I just start learning logic and noticed theres a equalizer and compressor on audio tracks automatically!

    Is there a reason for this?  and isn't she taking power CPU etc, all having these plug-ins automatically the?

    Technical TThe answer is Yes, but your computer has a lot of power.  Unless you have a large number of tracks I'd not concerned as long as everything is performing. You can always turn them off if you wish.

  • iMovie and several audio tracks

    Hello

    I'm trying to import video with multiple audio tracks (track 1 - background sound + voice; Track 2 - background only. Track 3 - voice only) in an iMovie but it just merge all tracks to unique soundtrack.

    How to split audio tracks in my video?

    Thank you.

    iMovie gives no control on separate audio tracks, you should use a professional for editing software do.  I think you can remove the audio tracks you don't want to hear using the handbrake (https://handbrake.fr/) before you import into iMovie (although I've never tried myself).

    Geoff.

  • How to replace an audio track

    How can I replace an audio track of low quality for a high quality one on Final Cut Pro X? For example, the audio of the film, by audio recorded simultaneously?

    Once I have sync clips, I can't see the two lanes in separate and remove that unwanted, I could do before (see https://www.youtube.com/watch?v=_qfIe6GbkzY). It does not work like that, and I don't know what to do!

    Thanks for the help!

    Myrna

    If there is a clip of multi, you can open it in the editor of the Angle and click on the speaker icon on the clip that has the sound you want to disable.

    Russ

  • How to cut audio tracks with tool blade?

    Hello

    I recently made the switch from fcp7 to fcpx and I'm having a real hard time! There are many things that I can't understand how to do, and it's just one of them:

    Solo Cup audio tracks with the blade tool (or another medium, if there is). Can I cut the audio clips on one side, but how I cut a piece in the middle of the clip?

    Thank you!

    YYou can't cut with the blade tool? Or select it, and press Cmd - B of type point skimmer/reading

  • Field of audio tracks changed without pitch shift effect applied. How would I fix this?

    I opened a voice on the project to discover that all the voices recorded were deeper, as if the effect of curvature of pitching has lowered the height of 2 semitones, even if there is no effect of moving field on the audio track.

    I can't help thinking that this is a major bug or I have something clicked by mistake. The project was ready to pounce, and now I'm scratching my head completely perplexed trying to figure out how to fix it. I tried to delete the list of actions in the history of cancellation but that does not solve the pitching glitch.

    Any help or advice would be much appreciated.

    Thank you.

    I don't know that I have followed completely. You recorded a voice-over and sounds good, but when you EXPORT it, it sounds lowest? Or it sounds more down in the logical session already?

    The only reason why I can think of for such behavior is a sample rate mismatch. It happened to me once I opened another software, which defined the sampling frequency of 48 kHz, but my logical session was 44.1 kHz. Logical and got confused. Recorded everything with 48 kHz while thinking it was 44.1 kHz. So play 48 thousand samples per second with a speed of 44 thousand samples per second is the same effect as a slower band, it slows down. She makes audio a little more slowly and the ground drops. As slowly reduce the speed of a vinyl record. Maybe it's the case. At this point, I don't know what to do. I had this problem but I do not remember how I fixed it. I think that I tried to change the metadata of the file and replace where it says ' I am a file 44.1 kHz ' with 'no, I'm actually a 48 kHz' file. I think I used Apple for "compressor" if I'm not wrong, but I couldn't say it's time back.

    Or, if everything sounds well in logic and exported just the audio sounds weird, then maybe the software that you play with, somehow has the bad example of fixed rate and plays the record with 44.1 kHz 48 kHz, resulting in the same effect.

    Hope I helped a little.

  • Audio tracks to follow tempo changes

    Hi all

    I'm really confused about something on Garage Band for iOS. Currently using an iPad with iOS 9.3.1 Pro 12.9.

    I started a new project, captured a loop of battery from another application (Anytune Pro in this case) and trimmed the loop so I could loop it and practice on top of it.

    I changed the tempo of the project and audio followed the project tempo change in an "elastic audio" way.

    What is happening now is that I tried to do again, and audio tracks do not follow the tempo change more! I don't know what I did different, I tried to reproduce several ways, but it simply does not work...

    Here is the link for the session, you can open it in your iOS device and change the tempo and you will see that the sequence (salsa one) will match the tempo of the session.

    https://www.dropbox.com/sh/swbfnj24qbuzhmn/AABSGk-zwc1GlMqxlYTMAhQda?DL=0

    If anyone can help me and explain how to make the audio tracks to follow tempo changes, I'll be very grateful! Thank you very much!!

    Hi flaviolira123!

    I can't open your file in Garageband (latest Version).

    But I think that you can only use Apple Loops loops to automatically match the tempo.

    I tried to loop an imported audio clip (import song, trimm)- but I do not have to be matching of tempo.

    I imported a DM1 via Interapp drum - but if I change the tempo of the project, my pace is in the old tempo...

    Have you found a solution?

  • MIDI synth external record while monitoring its audio to an audio track

    Here's what I'm trying to do:

    Remove my material mixer and jack my remaining external hardware Synths directly in my I/O.

    In PD, it's easy. Just "of entry monitor", the audio track the synth is connected, create a midi for the external synthesizer track and there you go. I want to record and tweak midi only NOT the audio.

    I can't get LPX for this. LPX will ALWAYS record the audio and midi.

    Any thoughts? I must be missing something very basic.

    Create a track external Midi and and use the external instrument plugin (exactly what is done)

    Set the Midi port regardless of your midi controller is connected to and the analog way everywhere where you have the audio of the synth.

  • Sounds of rattling on audio track

    Hello

    I read here that you need to convert mp3 to aiff file in order to get rid of the noise by clicking on the audio track on the sequence.

    I use fcp 7 and yosemite to OS X. Neither iTunes nor Quicktime give me the option of conversion...

    Any ideas where I could convert?

    Thank you very much

    Compressor will be. And Quicktime Pro will be too... Choose EXPORT, then in the export, EXPORT dialog box drop-down list, choose SOUND to AIFF.

    If MP3s are music files, they might have DRM (copy protection) that prevent the conversion.

  • GarageBand-export the audio tracks

    Hello!

    Need advice on how to export the audio tracks separately in GarageBand. I record an audio podcast in which I interview a guest. I need to record and send audio tracks separately to my assistant audio to change. Thank you in advance for your help!

    marciequintana wrote:

    Hello!

    How to export the audio tracks in GarageBand separately.

    each track (icon of headphones in the track header) solo one at a time and use the Action menu

Maybe you are looking for

  • Satellite Pro P300-1EC - cannot get wireless to work

    Hello! First of all. Excuse me for my English! TEC Spec. Toshiba Satellite Pro P300-1ECIntel WiFi Link 5100Windows XP Pro SP3 I have a big problem. I can't get the wireless LAN working properly.And the customer has purchased this computer because his

  • No display on Salellite P100-316

    Hello I have Satellite P100-316, and while I was with her, the display went off.I tried to restart, I have a view but he returned quickly to the wide. When I restart, all is well, except there is no display. I can even hear the boring music when wind

  • Satellite M30X how to open the case?

    Can someone tell me step by step, how to do to open the suitcase so that I can work the power connector? I tried to open it, but I'm afraid to do sth. bad... I pulled all the bolts and started to open the case, but in the middle and at the back it is

  • try to download a game and he keeps asking passwor and admimistrater name

    I'm trying to downlad a frpm bigfish game but it keeps asking for password and the name of administater that I do not understand how to do this, I put my name in but I do not have a password

  • Impossible to install pieces of updates problem

    Hi, I can't install updates. The problem is the background intelligent transfer service. It is not listed under services, but there are files in the system32 folder, after I enter a command window I get this: Microsoft Windows [Version 6.0.6002] Copy