No display on Salellite P100-316

Similar Questions

• Updated display on Satellite P100 - 10 M

  I have a Satellite Pro P100 - 10M. The computer uses Intel 945GM Express Chipset.

  There are ways to improve this by using PMCIA slot, USB, etc.?

  Thanks for all the answers

  Hey Buddy,

  What you mean? What do you now want to upgrade? Your monitor or your USB stick or something else?
  Would appreciate an explanation clear and good with your mind, maybe we can find a solution.

  Please give some comments so it would be easier to know what's the point.

  Welcome them

• Latency of the display on the Satellite P100-324

  Pls can someone tell me the latency of the display (Toshiba Satellite P100-324)? (I read somewhere that there 18ms... it's true?)

  Hello

  I found the info response speed (Raise + autumn) East of 25ms.

  Good bye

• Satellite P100-286 with no display after installing drivers

  I reinstalled XP on my 286 P100, as I did a couple of times before and went about installing the XP drivers on the Toshiba site. I was installing video drivers when the screen went black. I assumed it was a regular part of the installation of the video driver, usually the screen goes black for a few seconds, but the screen remained black.

  I tried various commands on keyboard, but nothing has worked. So I restarted the laptop. Now, the display lights at all. I can't even an external monitor to show anything.

  Any advice would be appreciated.

  Hey,.

  Can you see photo when you in BIOS mode for example?

  If so, you should try to go into safe mode and remove the display driver. Maybe something was wrong due to the installation of the driver

• Satellite Pro P100 - display 1440 x 900 upgraded to 1680 x 1050

  Hello

  I have a defective Panel in my Satellite Pro P100. Model No.: PSPAHE - 001001GR.
  Currently, it is a sign of Lp171wx2 with a resolution of 1440 x 900.

  I can change it for this Panel: LP171W02 with a resolution of 1680 x 1050?
  Will it recognize kind of Plug-and-Play? Better resolution and running as before. Or does not recommend or not even possible?

  Thank you very much in advance,
  Schwieger

  Hello

  I think he can.
  I know that the different models of Satellite P100 were equipped with two type of poster:
  17.1 inch, WXGA + (1, 440 x 900), color TFT display high brightness of amorphous silicon.
  17.1 inch WSXGA + (1 680 x 1 050), color TFT display high brightness of amorphous silicon.

  I m not very good if you could use the LP171W02, but the laptop would certainly deal a 17.1 inches, TFT WSXGA + (1, 680 x 1 050).
  You can also order a compatible part of a Toshiba ASP in your country.

• Satellite P100 - display problem after installing the Samsumg software

  Hello

  I have a Toshiba P100-PSPA3 and just bought a new external monitor Sincmaster from Samsung. I installed it yesterday and everything works fine, I just plug in and the laptop recognizes it as a second monitor. Then I noticed the monitor comes with a CD and they recommend you to install the components of this CD.

  I installed the driver and still works fine but then I installed a software called * Magic money *, it is said that I should make a new start, I did and the image comes in the second monitor, * my laptop screen is black.*
  Then I begin to try all the possible solution I had in my head. I open this Magic Tune, and he says that it s not compatible with my computer, so I uninstall it. I have downloaded the drivers from Nvidia, Toshiba, installed again and again doesn´t work.

  I prove with the nvidia settings and the West without change. NVIDIA doesn´t recognize my laptop as a monitor, screen it recognizes just the Samsumg Sincmaster.

  I looked for people with the same problem in other forums and a possible solution was to turn off the computer, remove the battery and press the power for a few seconds, trying to carry out the computer. I did and it didn t work.

  Someone here could give me a light? I m totally lost now and I have to work with my computer in the next few days!
  Thank you very much
  Ivan

  Hello

  This software is not known to me and it is important to say that notebook manufacturers may not support some third part software.

  I put t know if this software must be preinstalled but I'm sure you can use your external display without it. When the external display is connected, you can switch between the LCD and external monitor by using the FN + F5 key combination. If you want to extend the display outside a use Windows display settings. It should work. I tested several laptop Toshiba with a few different monitors in my office and I n t noticed no problem.

  Have you already solved your problem or you are still looking for the solution?

• No display after the update of BIOS on Satelltie P100

  Hi all

  I have a P100, which does not display laptop.
  Recently I have updated the Bios with this years updated bios.
  The problem is that it does not start on the external monitor and FN + f5 do not work.
  The laptop starts so I guess this is the display setting in the bios.

  Can anyone who has the P100 (pspa0e) with the latest Bios (32-bit) write down the exact key sequence to enter the bios and change this setting and save it?

  Kind regards

  Stephan

  Thanks much for the feedback!

• Dualview on 2 external displays Satellite P100

  I just bought a Satellite P100 to replace my desktop computer is waiting for that, since it has two outputs for external monitor I could drive two external monitors simultaneously using DualView.

  It would seem that I have either:

  Internal display + display DVI connector

  or

  Internal display + screen VGA connector

  Is it possible to have:

  Display connector DVI + VGA connector display?

  Hello

  To my knowledge it of only possible to use an external output.
  Therefore, you should be able to use the DVI output with the internal display or the RGB port (port monitor)

  But it of not possible to use both DVI and RGB.

• Re: Satellite P100-160 - failed display driver installation

  Satellite P100-160, PSPAAE, 32-bit vista.

  Today, Aero is not working and not available in graphics properties. Later installed the site of Toshiba UK, 15.0.1.1114 Intel display driver. This version was actually older than my current driver but I thought that maybe she was the only availabel that it must be correct.

  The driver installation failed with an error (no details don't just "year error has occurred"). Now, I don't have aero and my screen resolution cannot be set above 1280 x 800 - 1440 x 900 is expected

  To say that I'm pisseed would be an understatement. Can anyone help? Thank you

  Hey,.

  If Aero is not available I think that it s display driver problem

  In any case, did you remove the old display driver before installing a new? Go to Device Manager > right click on the graphics card > uninstall. After the restart the display driver must be uninstalled and you can start with the display driver installation.

  If you install drivers make sure you are logged in as administrator and antivirus/firewall is disabled. Reboot once again and you should be able to choose the native screen resolution now.

  Check this box!

• Display failed on the Satellite P100-434 - need to change the boot order

  Hello
  My Satellite P100 suffered a failure of the display last night. I can confirm that the backlight is working but I do not get a display.
  I think it's to reach the windows logon screen, certainly the disc is rotating upward and if I plug an external floppy drive in, the system reads what it wouldn't if it did not clear the message.
  Is what I would try booting from the dvd, but I need to know the keystrokes and above all, the timings.
  I think memory, it's F12 on first boot, but not sure after that.
  Running Windows 7 Home premium.
  Sorry for the lack of information, by making this post via my Nokia.

  > What I would try is booting from the dvd, but I need to know the keystrokes and, especially,.

  Try F2 or esc (it can also be a delete key)

• Satellite P100-429 - cannot install the display drivers for Win XP SP3

  Hello

  I have Toshiba p100 429 portable, installed with win xp professional sp3. I am unable to change the screen resolution of 640 by 480.

  In fact, I tried to download the toshiba site display driver but after installing the driver, it gives a blue screen with error error NV4_mini.sys.

  After that I can't yet run my laptop.
  I currently use the external monitor (master B2230 synchronization). I also tried to download the drivers from the Nvidia site, but that does not work either.
  Low resolution on my screen. Thanks for your help

  Have you tried to install THIS driver?

• Satellite P100 - 400 (PSPA6E): display driver does not work with Vista 64 bit?

  Hello

  I have a P100-400 (PSPA6E) Satellite and I just got the new version of Windows Vista x64bits. I tried this version of Vista because this series of laptops in the 64-bit processors. Well, the problem was when I downloaded the drivers to display on the site and when I'am install the installer says I'm not a Windows vista OS.

  Well actually these drivers only work for Vista x32bits. And I had the same problem with the audio drivers. If Vista was running really slowly and noiselessly, perfect...

  What I am asking, that is, if you realize laptops with 64 bit, why aren't you drivers that work with 64 bit systems...

  Hello

  In fact 64-bit Toshiba drivers are not available at this time on the Toshiba page.
  I think 64-bit drivers are not available because Toshiba doesn't provide any laptops equipped with 64-bit operating system.

  But as far as I know that the new 64-bit drivers should appear both text.
  I'm also looking for these drivers because I m an owner of the 64-bit version of Vista.

  It seems that we have to wait but I m sure that the drivers will be available.

  concerning

• Displays swap when using double view on Satellite P100-437

  Hello

  I use display drivers downloaded from the Toshiba site for a P100-437, geforce nvidia go 7900 gs (v. 94.37)
  My setup is such that I have a LCD monitor plugged into the back of my laptop that I use as my main screen and screen of my laptop is used a secondary antibody two-way. In Control Panel, you can decide which monitor to have on the left / right but whenever I reboot it reset back to normal. That is, it comes around so I have to move my cursor to the right to go to my laptop on the left screen.

  I was hoping that someone would have an easy solution for this. Thank you!

  Hello

  I m not 100% sure, but I think that there is not much to do.
  I wonder how you selected the external monitor as primary monitor on your laptop because I can remember the old notebooks with XP OS did not this feature and it was not possible to use the external monitor as primary.

  But it seems that the new Vista operating system to provide this function.
  However, in the Toshiba HWsetup utility, you will find the view tab.
  There is a function called Power on screen this tab allows you to select the internal display or an external when the computer monitor starts.
  Try to change it, and maybe it helps.

• Satellite P100-240: touchpad that displays the icons of backlight?

  Hi all
  just bought a computer laptop p100-240 its excelent
  but I have 1 question

  This model has the touchpad that displays the icons in backlight, I can't find anything about this or I look in vain

  Thanks for any help
  Shaun

  Hello

  Sorry, but I m don't know what you mean exactly.
  Did you mean the utility launch & Touch?

  I downloaded the user manual for this unit on the Toshiba site and I don t find this utility on the P100-240 Sat.

• Toshiba display driver vs other sources - Satellite P100

  Hello

  A few questions...

  A couple of weeks ago, I bought a P100-188 (pspa3e) of PC World (don't hate me, they were cheaper than if she had in stock!), it came with the installed NVIDIA 6.14.10.8400 - presumably from the Forceware 84 of NVIDIA drivers.

  Toshiba driver download page offered a version of the 8.3.2.0 driver, posted on 7/30. I got it, but when I tried to install it, he told me that he is older than my current version. I did not allow the installation to continue.

  Can someone tell me:

  1. What is the difference between tosh drivers and drivers nvidia reference? I know that nvidia drivers refrence support officially this laptop (and I have not tried to install). Are there features of pilots tosh useful to have those for?
  2. what version of display driver other owners P100-188 are on their machines?
  3. what tosh non riders tried of people?
  4. don't Toshiba properly maintain their display on the site to download drivers? The pilot seems to rest on Forceware 83...

  I hope you can help :)

  Hello

  As far as I know the original nVidia drivers is designed for desktop PC graphics cards and not for laptops. The gift of t mobile graphics cards are different. There is only a chip from nVidia. Because of the laptop miniaturize cards have no own strong cooling modules. Therefore, the graphics drivers from Toshiba are responsible for execution of the graphics card. If the graphics card temperature increases at the critical level driver degrades performance. Then, the temperature drops to the lower level.

  Production graphics card drivers original don t support such function.
  I read that some people have used an omega drivers. But be aware that the Toshiba doesn't recommend using different drivers. You must use own graphics driver from Toshiba. But if you want to use another driver, you do so at your own risk.

  Greetings