Problem with a Dell N4032F switch

Similar Questions

• Problem with the Dell powerconnect 5424

  Hi all!!

  I got 2 switch dell powerconnect 5424. I set them up with an IP and everything goes well (for now).

  But when I connect a switch on the network I have this message:

  1 January 2000 00:01:07 % STP-W-PORTSTATUS: g21: STP Forwarding State
  1 January 2000 00:01:27 % STP-W-PORTSTATUS: g21: STP Blocking status
  1 January 2000 00:01:27 % STP-W-LOOPBACKDET: g21: STP loop detection.
  1 January 2000 00:01:42 % STP-W-LOOPBACKDETRSLV: g21: fixed STP loop detection.

  I do not understand because there is only the network (port 21) and my computer that are not connected so no possible closure.

  There is the same problem with the second switch, so I think this isn't a hardware problem.

  Someone has an idea to help me?

  Thank you

  
  

• How can I fix a problem with my Dell Inspiron 1750 internal speaker?

  I started having problems with the internal speakers on my Dell 1750. Everyone knows about this problem? Is there a solution?

  Hello

  For hardware problems, you will need to contact the manufacturer of the computer. Here is a link for your convenience.

  Dell Contact technical support: http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&cs=19&l=en&s=dhs& ~ ck = mn

  Concerning

• problem with wifi Dell 1510

  I have a problem with my wifi. It dosnt work. I don't know if my adoptive parent works well. I think that the problem is related to software. I want to know what to do to connect to wireless internet. my windows is vista Home premium. one thing I should say is that when I turn on his lamp dosnt light up my wireless.

  Thanks indeed

  http://support.Dell.com/support/downloads/index.aspx

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  If the problem persists with your wireless network, please contact Dell:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the Dell recovery and backup system

  Hello

  I have problem with dell backup and restore in my dell laptop (inspiron15). When I select the backup factory option > choose a drive then continues, he said 'Please sustained insert blank to keep media. "
  However, blank disc is already inserted and formatted with the live file system. Please help if anyone has the solution.

  Thank you

  Hello

  Thanks for your reply.

  Usually, the blank DVDs would be already formatted and ready to use as they are writing discs once. Please try to create the backup disk without formatting the DVD.

• problem with the dell integrated webcam

  Hi guys

  I have dell inspiron 3542

  IAM facing a problem with my built-in webcam. whenever I run it it says connect a supported device.

  I use win 7 6

  bit

  Hi SAMAR-,.

  When the issue started? Which application you use for the webcam? Built in mic work well? The webcam is detected in Device Manager?

  Update the BIOS - http://dell.to/1TO5Xcf

  Run all windows updates and check again.

  Create a new account admin and check - http://bit.ly/1Bgok2R

  Run the test of the webcam and the microphone in pccheckup - http://dell.to/1NEc1Y4

  Restart button f12 system and press on start - choose the diagnosis. Let run diagnostic tests and if you encounter errors - take note of the full error even report for us.

  If the system is under warranty, write me a private conversation with the service number and contact details and attach a screenshot of the Device Manager with expanded imaging devices.

  Keep us updated.

• Windows 7 problem with the Dell XPS 15 laptop (L502x)

  Dear friends,

  Greetings!

  I need your assistance related to a problem, I was confronted with my Dell XPS laptop computer L502x purchased in the United Kingdom a couple of years back. In fact, I tried to update my system for windows-10 de-windows 7 Home Premium (originally installed) via windows update. Later, due to some display problems driver I had to return to the former. But, as soon as I returned my windows for windows 7 HP, it stopped at day no more and I was constantly receives the message from windows update that always ends with a constant error message; so the update process has failed every time.

  Therefore, I want to restore my laptop to factory through the restore partition settings that already exist in my machine, the "repair" option does not appear (snapshot attached) when I hit the F8 key. I wonder if there is another option available to use this recovery partition to recover my laptop to factory State. Please suggest me the solution so that I can do what is necessary to restore my machine to the factory settings.

  I can't wait to have an encouraging response from you.

  Best,

  Adnan!

  If the Ctrl key pressed, while pressing the F11 key repeatedly (about once per second) at startup does not work, it means that the recovery partition no longer exists.  If this is the case, you cannot restore to the factory.

  This would also be the case if the hard drive has been replaced.

• Problems with config Small Business switch

  Hi, I know that if I read the documentation I will come for answers, but I'd really like some input from someone with more knowledge than me. I have a problem with Cisco SF300, one of the Small Business switches. I have a single interface on my router and I need to separate my internal networks, I thought that one way would be to use VLANs. On my two internal networks a network has D-Link unmanaged switches, the other has the Cisco SF300 I did as follows.

  On the Cisco Switch, all of the default ports for ports of junction. I changed FE1-FE24 and GE1-2 to access ports.

  Created two VLAN and placed FE1-FE24 in VLAN10 (also my management VLAN), GE3 is a trunk Port for unidentified VLAN20, VLAN 20 uplinks to my DiLink switches. This way my unmanaged switches traffic arrives on a trunk on VLAN20 untagged port.

  GE4 is a trunk port and I assigned to VLAN1 untagged, tag VLAN10 VLAN20 tag and. 10 of VLANS and VLAN 20 then to my router.

  The plan was to connect GE4 to my router, but I had two things happen that I can't explain.

  All first as soon as I connected my D-Link to GE3 LAN on VLAN20 came down, I couldn't ping servers from computers etc, all devices are connected to the D-links unmanaged. Secondly, the responsibilities of VLAN changed on GE3 GE4, VLAN 10 and 20 disappeared and only the VLAN by default was assigned, also under settings VLAN my state of interface VLAN for VLAN20 shows people with reduced mobility. One of my FE12 continues also to change VLAN access ports.

  Can anyone offer any suggestions as to what might have crushed the LAN and why change my VLAN. I wrote my config running at startup configuration incidentally.

  I added two screenshots.

  Seriously, I'd appreciate the help.

  Thank you

  Bob

  Hi Bob,

  Could you please post a topology? I can help with this, but it would be much easier that I could see your network.

  Thanks in advance,

  Garrett

• problem with mode Dell Wireless 1395 mini-map standby in windows xp

  I have problem with my computer laptop inspiron 1525 and the mini-map dell 1395 wireless.

  I installed windows vista for about 4 months, and there is no problem with the wireless.

  now, I have installed windows xp prof.  and it's the wireless card works fine. I put my laptop mode "Eve" and after a walk to the top. the wireless card absolutely does not work.

  I tried to uninstall and install the driver, I tried to run windows backup, I tried to do what I can, but no useful idea.

  Tip: When I try to check for the networks without wire around me, he say like this but in Arabic "could not verify the 65535 channel, verification will be repeated later.

  http://www5.0ZZ0.com/2008/07/02/17/850863907.jpg

  [url = http://www.0zz0.com] [img] http://www5.0zz0.com/2008/07/02/17/850863907.jpg [line] [url]

  any body help me befor replacing the xp on vista

  
  

• Problem with the Dell Dock shortcuts

  I put a shortcut on my Dell dock some time ago, since then I deleted and added another shortcut to replace. Whenever I restart the computer, the old shortcut is back and my new must reset again. I tried the lock settings, but it always comes back to the old shortcuts on each reboot. How can I get the dock to hold its changed settings?

  Hello

  Willl you must contact Dell about this, because they provide you with the Dell Dock.

  Try asking their Support forums.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Problem with the Dell Optiplex 755.

  Have a refurbished Dell Optiplex 755 with windows 7, only a few months ago.  Sometimes the screen rises all yellow and you can't get out.  Sometimes screen goes all black but if you click anywhere on the screen with the mouse will go up all that is behind the screen where you clicked, but you must do it all over the screen to see what is there.  Now the last week or so whenever you leave the computer and return windows has recovered from an unexpected shutdown down.  Can someone tell me what could happen?

  This behavior indicates a video problem.

  A cable loose or damaged video from your computer to the screen.

  A failed video monitor.

  This computer has a separate video card?  If the cable connected to the back of the PC is vertical, the answer is probably no.  If it's a separate video card, you need to open the PC and remove, then reinsert the video card - its called re-seats of the Board of Directors.

  How old is follow you and what type is - LED or CRT.  Is - this really really heavy?

  Remove and check the end of the thread and examine the tiny pins in the connector, none of them are bent?

  The judgment is not likely related to changing the color on your screen.  A number of things that cause, but you need to check your hard drive and check the temperature inside the box.

  Turn off the power.  Hold the button for 7 seconds.  Open the case and see if there is a lot of dust.  Have one of those cans of compressed air.  Blow off the dust from the case.  Pay special attention to the fan on the processor with the fins of the radiator aluminum under him.  Make sure that it is free as well as fans of dust.

  You should test the hard drive to ensure that it is not a failure.  If you tell us the manufacturer of the drive, we can tell you where to find the appropriate software.  In the text box above the globe on the left lower part of peripheral type.  Type of device.  Click on Device Manager.  In the window that appears, click the small arrow to the left of the disc.  Send us the model number, you can see it.

• I have a problem with my account of switching for the guest account.

  Original title: my account set to a guest account

  My account has switched to a guest account and I don't have an administrator account on the system. I started in safe mode but when I run "net user administrator / Active: Yes or net user administrator password 1234" I get an error message. Nothing helps. When I try to change the permissions, he asks an Admin password that I did not and I can't even select the "Yes" button. All this happened when I pass the account and the account for Auto-Login.

  Here you go:
  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before your account is downgraded
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.
  If you still have problems then to be a little more specific. Reports "I get an error message. Nothing helps. " strictly tell us. You must cite the explicit screen messages.

• Problems with a digital slide switch.

  Hi all

  First off thank you in advance for your help.  Here's a description of my problem.

  I try to use a digital slide switch to adjust my z-scale on a graph of intensity.  I use several images to create a high dynamic range (HDR) image and having a slide for my z-scale to adjust it on the fly is much easier to use then manually punching in numbers.  My problem is that I'm covering about 7 or 8 orders of magnitude from min to max in my z scale.  So I need, in order to see all the data in the HDR, the slide image to cover the range of the min max value of the image.

  When I put the mapping scale logarithmic slide, so I can more separation in the values and see and scale through the easier lower end, scaling is automatically truncated to onle 3 orders of magnitude.  This does not work for me, is there a way to fix this?

  Example:

  When I put the scale to be the minimum and the maximum of z on the graph of the intensity scale in the slide.  I have values of z scale 2.47E + 7 to the max and the min 0.  The maximum value on the scale of the slide = 2.47E + 7 and the min value = 2.47E + 4.  I need the minimum value is 0.

  Thank you once again,
  ~ Daniel DeWitte

  Daniel,

  Log (0) =?  Exercise left for student.

  Try to set the property Z Scale.Minimum a small positive value such as 0.1 or 0.001.

  I created a slider and a digital control.  The minimum slider is set to zero. The CNC is an integer ranging from 0 to 20. The maximum cursor is 10 ^ (numeric). The cursor is wired for the graphic intensity ZScale.Maximum property node.

  Works very well.

  Of course, I would put the changes in a structure of the event instead of writing to the nodes property on each iteration of the loop.

  Lynn

  

• Have a problem with my Dell 8 3830 place

  I bought 8 place five days ago. All specifications are correct set by Christine Benchmark. But trouble is, first of all my back camera have a sound "Tick" when I go into any camera or camera stock application and it does not focus well. the range is blurry except at close range about 20 cm and the closer. And the second is my order number is shown me I had an 8 venue in the dell support site. but my serial number from the box and the device's show I had a Dell 7 venues. that is wrong with it. Can anyone help? I bought it from a dealer wholesale in my country.

  IZTR,

  Power on the Tablet

  Click settings. If you don't see the settings, press the middle button, and then click settings.

  In the left column, scroll down on the tablet or any system.

  Then in the right column, it will tell you the model of the Tablet you have

  Rick

• Problems with the Dell place 7 4.3 update

  After that I got the 4.3 update... my Dell 7 location behaves badly on some applications... (touch screen would no longer, some applications would be rather slow)... so I decided to do a reset of factory/restoration and simply install the apps I was using... Now... I tried to set up MSN push email with the default client (e-mail). (that's for Push Mail / number of files) Already configured automatically using this account very well default Android client... Also tried to make a corporate account or by e-mail of the android settings screen and wouldn't work... Manually enter the settings does not work either even if I had to * another * android tablet...  Any suggestions...

  I've also seen ths with the 4.3 update on my test systems.  I also saw a lot of post on other Android forums see the same thing on other devices that have been updated.  I provided feedback on the Android Dell team to work on a fix.

  As an MSFT has an official APP in the store that works with 4.3.

  Erin