Similar Questions

• send packets to vmware virtual subnet with the NATing

  Interface WiFi of my Mac's on 192.168.0.0 and VMware linux VM's on 192.168.56.0(vmnet8 NAT interface). My WiFi router is a linux (RPI) running RaspberryPi. I'm making pass for traffic and define the static route to the network of comments to my router, so I don't want traffic back to my MAC for the network of comments of masquerade.

  There is also a host only interface, vmnet1, for the virtual subnet that doesn't masquerade traffic, but it does not transmit traffic.

  So, how can I disable the NAT on vmnet8 or forward traffic on vmnet1?

  Concerning

  Satya Gowtham Kudupudi

  You should ask on the forums of VMWare.

• Files duplicate being created on the data with the active cache host store

  Updated the following this weekend:
  Discovers the connection Server 5.1.2 - 928164
  View composer 3.0.0 - 691993
  vCenter 5.1.0 b-947939
  a-838463 5.1.0, ESXi

  After the upgrade, I installed the latest tools in the virtual machine, see Agent 5.1.2 - 928164 and the driver audio Teradici on my shot.  I have not updated the machine hardware version.

  I enabled host hiding on my pool, and the pool is set to refresh immediately on logoff.  When I stop or disconnect from the session to view, I see an error in vCenter like this:

  Reconfigure virtual machine VMPool-3 cannot complete the operation because the file or folder [VM_POOL_LUN 12] VMPool-3/VMPool-3-mark - point.vmdk already exists

  Then it creates a new folder with a _1 on the store of data for this reason:
  VMPool-3 (original)
  VMPool-3_1 (duplicate)

  Once I turn off host cache the problem does not occur.

  Has anyone seen this problem?  I currently have a ticket open with VMware.

  I upgraded one of my sites to view 5.3 w / vCSA 5.5 and 5.5 ESXi and this problem no longer exists.

• How to boot from a virtual Windows disk - 10 Workstation - TPG

  I am trying to boot from a virtual gpt, with windows disk 8 inside. The host is windows 7.

  I have a paragon image 12 a MS Surface Pro - Windows 8 pro.

  I have a virtual machine Windows 8 pro machine, where I created a second virtual disk, and then I imported the image of paragon in this disc. Partitions have been successfully created and virtual disk is correctly mounted and recognized. Then I attributed to this second disk LUN 0,0 and I added the line "firmware ="efi""in the configuration file." But I get: "the operating system not found '.

  Because this could be a common situation, I'd appreciate the help.

  Thanks in advance.

  You must assign manually, no support for VMware Workstation, firmware = "efi" option in the .vmx virtual machine configuration file.

• Cannot create a virtual machine with a vmdk file copied from another location, please find the attached error

  Hi all

  I copied a file from one place vmdk and try to make a new virtual machine with this vmdk file. But when I turn on after the creation of vm error is coming. Error in the text and the image below

  Power on the virtual machine: cannot open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  See the error of the stack for more details on the cause of this problem.

  Time: 31/03/2015-14:40:05

  Target: DBServer

  vCenter Server: vcsa

  Error stack

  An error was received from the ESX host turning on DBServer VM.

  Unable to start the virtual machine.

  Power DevicePowerOn module has failed.

  Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/543d140b-feb33d52-7640-90b11c9796c3/vmdk/kapuatdb.vmdk'

  Could not open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  This error message generally if the hard files have been copied hosted as VMware Workstation product, which uses a format of sparse file that is not supported on an ESXi host. Instead of the hard copy, you can use VMware Converter, or - if you prefer - you can convert the hard using vmware-vdiskmanager (before transfer) or vmkfstools (after downloading). I deal to use vmkfstools you will need to load the mutliextent module (see for example "Clone or migration operations involving virtual discs non-VMFS on ESXi fail with an error" vSphere 5.1 Release Notes)

  André

• Masking an image with a shape from Keynote for the iPad?

  I am actually writing an article in support for a Web site and it does not seem you can mask an image with a shape from Keynote for iPad - something that is incredibly easy to do in the version of OS X. Clues on how to achieve this in the iOS version of Keynote?

  Thank you.

  Nevermind, I found the answer - all we need to do is add the image AND form of the slide, then select both at the same time. One of the choices that is displayed in the context menu is "mask with shape.

• Oracle cloud virtual image, I was able to create the database using DBCA (virtual image) oracle cloud. I understand with the virtual image, we won't have a lot of tools like on DAAS cloud... But could please at least use us dbconsole?

  On oracle cloud virtual, image I was able to create the database using DBCA (virtual image) oracle cloud. I understand with the virtual image, we won't have a lot of tools like on DAAS cloud. But could please at least use us dbconsole?

  
  I tried to start dbconsole, and it did not work:

  [oracle@ltutest ~] $ emctl start dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_ltutest.compute-aulatrobeu83140.oraclecloud.internal_ORCL not found.

  
  

  According to the oracle help doc center - "creating a database on an instance of virtual image service" (http://docs.oracle.com/cloud/latest/dbcs_dbaas/CSDBI/GUID-29290A81-8798-4988-848E-77A1BE0CF08A.htm#GUID-4851560B-D4B6-42...)

  database was created with the option as:

  emConfiguration - NONE - storageType FS

  
  

  I guess we have to manually configure the em console, but when I tried to create it, he told me that "' Dbcontrol repository already exists." "

  When I try to start it, it exports the error

  [Oracle@ltutest ~] $ emctl start dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_ltutest.compute-aulatrobeu83140.oraclecloud.internal_ORCL not found.

  Could someone could give me help with this problem?

  
  

  Thanks Brian. I tried your command, and it works. Now I've encountered another problem, how can I browse the URL?

  I created the access rule for access remote on port 1521 and 1158. but when I try to browse the EM console URL, it does not work. all the configurations that I need to do?

• How can I transfer images from external hard drive with the gateway settings to new computer?

  I used to use Adobe Bridge on a computer that no longer works. My computer tech then made the hard drive of this computer on an external hard drive. Now I want to transfer all those images with all the settings, I applied them to my new computer. My new computer is a PC with Windows 7 and I run Adobe Creative Cloud on it.

  Thanks for your reply. Where the xmp file?

  It depends on your preferences settings. By default, Bridge is set to store metadata in an XMP file. This is the file that has the same name as the original, but it only use the extension ".xmp" instead of Raw file extension.

  Bridge stores this file in the same folder as the original. If you use Bridge to move the files to another location it selects automatically the xmp files to travel with her.

  If you use the view menu / show hidden files, you will see what Curt meant by XMP are hidden files, all have a document icon.

  If you converted to DNG RAW format this data is written to the file itself, as is the case with other types of files such as jpeg and tiff, that can be managed by the cab.

  You should be able to copy the whole folder to your new system or bridge to the old disk, select the file in the content panel and the use of the Control Panel folder to navigate to the new location and use drag and drop

  Many options

• Creating a vm from a ghost image

  When I try to create a virtual machine from a ghost image he sees not the vm disk. He can see my usb drives, but not the virtual machine created to drive. Can anyone help?

  Thank you

  Sam

  The boot environment, Ghost is not the drivers loaded for the type of disc you are using.

  What type of disc you are trying to restore to? I suggest to restore an IDE drive, then use VMware Converter to create a new virtual machine with the right "stuff" put in place.

  Mike

• Adobe has a product able to burn a dvd from an iso image?

  Adobe has a product able to burn a dvd from an iso image?

  (The ISO image is not the video, it is software).

  and

  Adobe has a way to mount an ISO on a virtual drive?

  (Again not video)

  I still have, but never used. I'm not sure what it does.

  I guess he's with dvd-video, but maybe it can handle ISO images.

  Thank you

  Jerry

  Use the FREE version of

  http://www.imgburn.com/ burn

• Multiple images with the same file name no doubt prevent export

  iMac running OS X El Capitan v10.11.6; Photos 1.5

  I'm trying to export approximately 331 images and I get an error report saying that only 169 of the exported images due to the inability to create files for 159 of the images.  Then the report gives me the names of files of the first 100 images for which files were not created.  After looking at many images that would not create a file, I realized that, in any case, there was at least one, if not several, other images with the SAME EXACT FILE name as the image in question.  I can't change the names of files by right click on "info".  I tried to export the images and change the names of files to export using the sequential option and the option of album name - always having exactly the same problem.  I even tried not to export an image at once and change the name of the file individually or no available. Is there a work around that? I desperately need to export those specific images. I am trying to create a photo album for shown to mothers who choose a family with which you want to place their child/ren for adoption. I'm at my wit's end.  The kicker is I'm moving towards trying to export all my pictures, and that's going to be a HUGE problem in course for me, so I really hope that there is a way around this question somewhat simply. I am a hobby photographer and use the computer for businesses and crafts.  I've seen a few posts that included answers referencing "AppleScript" - I have no idea how to do something like that.

  From here on I will DEFINITELY ensure that my Canon continually numbers the names of image files and automatically resets.  For the other photos other than Canon, is possible to rename images during the import of the lot?

  All advice and help will be GREATLY appreciated!

  Finder has the ability to rename files with various models of lot.  Simply select all the files to rename, right-click one of the selected files, choose 'Rename X points... '. ", and then set the options and click on the button"Rename ".

• Deleting files from the Digital Image Starter Edition 2006

  I'm having a lot of trouble trying to remove files from the Digital Image, Library 2006 Starter Edition.  It is in such a mess with files for all my music files, Readme files and many other files that have no photos or videos.  I tried everything to remove these including uninstalling and reinstalling without the time, but it keeps always pick up these files and is therefore very difficult to find the image or video file that you need.  I want to delete all the files in the library and implement only the image and video files, which I need.  Can anyone help please?

  Hi volunteer J - I found the POD PD3 file, but when I go to change the type of file to the FORMER, he said that changing a file extension can render the file unusable.  I have copied all the Microsoft file along with the POD file, but wonder whether he should actually do this.  Advice please. -Thank you

  ===============================================================
  It's just a standard message warning... If you renamed the file back to Pictures.pd3 all
  would be as it was before you it renamed to Pictures.OLD.

  Of course rename will make it unusable, but it's what you need to do if you want to delete the library.

  Renaming or deleting the file Pictures.pd3 will force the Digital Image to create a new Pictures.pd3 file.

  If the warning message affects you... try to rename this OLD_Pictures.pd3 way

  I guess that you know, that the Starter Edition is only a 60 day trial version?

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• A VPC Image can be activated with a real product key?

  Hello, I have a real copy of Windows XP (in a box), but I would like to use one of these virtual machine images (Images of VPC), expiring August 9, 2009.   I wonder if it would be possible to activate the VPC image with my real product key?

  I was wondering if its possible because he can save me installation of service packs and all of time clean install using my really old XP disc.

  Mozillakilled salvation,

  Thank you for using Microsoft Vista answers forum.

  Yes, when you use VPC images, you install the operating system, and it is treated as any other facility with the same licensing requirements. This looks like a reasonable alternative to a dual-boot machine since you don't have to reboot to switch between operating systems.

  Here is a link to the Microsoft desktop virtualization products:

  http://www.Microsoft.com/virtualization/products/desktop/default.mspx

  Hope this answer your question. Post back and let us know your comments!
  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• recover a file from a system image

  After an upgrade to W10 of W7, which proved to be unsatisfactory, I had reinstalled W7.  As part of this, I lost a file.

  I have a Windows Image backup that contains this file according to me, but understand that I can not restore individual files from the backup Image.  Is it possible to restore the Image of an external hard drive, and then copy the file lost to the Local C drive without overwriting other files?

  I have a Windows Image backup that contains this file according to me, but understand that I can not restore individual files from the backup Image.

  Your understanding is incorrect. You can recover an individual file from a backup image. Here's how it works:

  1. Use Windows Explorer to locate the .vhd (Virtual Hard Disk) file in the folder on your external drive \WindowsImageBackup. Note the .vhd extension.
  2. Launch Manager (diskmgmt.msc) disks.
  3. Click Action, and then attach the virtual hard disk.
  4. Use the Browse button to locate the file that you found in step 1 above, and then click OK.
  5. Note the new assigned Windows drive letter. It could be G:. If no drive letter is assigned, right click on the new drive and give it a drive letter.
  6. Use Windows Explorer to open the G: drive and recover your files.
  7. When you are finished, close Windows Explorer.
  8. Go back to the Disk Manager.
  9. Right click on the new drive on the left side of the Panel where it says "base" and "line".
     Click 'detach VHD.

  I highly recommend to use this incident as an incentive to implement a robust backup system. Do not backup of important files on a regular basis (e.g. weekly) on a external drive is risky. Not saving them before a major take extreme risks. A lot of people never save all files. They all change their attitude after a significant loss.

• BlackBerry 5 - image with text and the background transparent resizing

  Hey,.

  My application consists of a series of images stacked on each other. Some are transparent, some are not. I use images high resolution and resize them based on the width of the screen of the blackberry that runs the application.

  I'm having some trouble resizing of images with text on a transparent background. The resulting image is not of all anti-aliasing. This is the code I use to do:

  function scaleBitmap(Bitmap bmp){
  
  int rgb[] = new int[imageWidth * imageHeight];
  bmp.getARGB(rgb, 0, imageWidth, 0, 0, imageWidth, imageHeight);
  int rgb2[] = rescaleArray(rgb, imageWidth, imageHeight, width, height);
  scaledBmp.setARGB(rgb2, 0, width, 0, 0, width, height);
  
  return scaledBmp;
  }
  

  And here are the results from a group of images resized in photoshop:

  

  Is it possible that I could improve my resize code to give better results?

  Thanks in advance!

  I found a solution and it is on these forums all the time!

  http://supportforums.BlackBerry.com/T5/Java-development/solution-for-properly-resizing-transparent-b...