Duplicate task cvi

Similar Questions

• Duplicate task bar buttons

  With most of the programs I've pinned to the taskbar, when I click on the icon to quick launch Windows 7 changes this icon in a button. But with a few programs, iTunes for example, Windows creates a new button further to the bottom of the taskbar and let the same icon. Why this happens and what I can do to change it?

  This can occur after a program is updated, depending on the configuration of programs their shortcuts.  Run the program so that you have 2 icons showing.  Do a right click and UN - first pin (left) to remove it.  Then right-click the 'real' and PIN.  Move it to where you want, and it should work as you expect then continuation.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• DAC decoupling HR and finance

  Hi guru,.
  
  I worked in the implementation of the BI applications earlier with finance, to supply and project anlaytics earlier, all tasks were tied up in a single execution plan.
  
  However this project that I'm affected is having END and HR related to single execution plan. Environment of our customers, is to have load balancing active architecture, so I want to have separate execution plan of finance and time IE to run separate ETL in charge of finance and HR.
  
  current configuration is as below.
  • Human resources and finance are built in the same execution plan.
  • The implementation plan includes six areas.
  • The data loading is performed in the same database and the same pattern.
  Environment: Oracle EBS 11.5.10, BI 7.9.5.1(HR Apps et finances), Oracle database 10 g
  
  If the two are separate from enforcement of the CAD of the plan what are the impacts would be we face?
  
  Also if the DAC servers are separated for the HR and finance, as well as if the schema of database of HR and finance are also separated, would it effect the counterclaim of the report?
  That is to say in a separated environment will finance users can see/report dashboards for HR? and vice versa?
  
  What other things need to be addressed before separating the finance and human resources (which are not under the same execution in CAD plan)?
  
  Thanks in advance.
  -Kamlesh

  Are you saying you are going to use two different targets DW, one for HR and one for the end?

  It seems that you plan almost like two separate implementations for the end and the other for HR where
  It is the same source?
  The target is different from DW or a different pattern of DW same (essentially it itwo Dw if your essential dimensions will be duplicated)

  In this scenario all the tables of the base (dim and fact) will be replicated in the schemas and all the reports from data analytics both end and HR
  must be replaced as a customization.

  Here I put in doubt, if performance is a pilot, then separating HR and end (and therefore duplicate tasks which are common), I don't think you
  will get overall performance gain. Have you compared the time by making separate HR and fin and both together in a single environment.
  Perhaps you need to focus on the ETL run differential that the satellite on the separation of the environment based on human resources and the end. If you have large tables, then partitioning
  makes large tables like w_gl_balance_f etc. can be used to accelerate incremental ETL.

• I see several duplicate processes appear in my task manager, both for the programs I use for my system.

  I am a user of Windows Vista Premium Home Edition (64-bit) and I recently met a strange and frustrating problem:

  Process/images in my task manager appear as duplicates, native processes on Windows for the process for other programs such as my web browser or the video card drivers.
  Treatments that are be duplicated are as follows:
  Chrome.exe * 32 - 2-3 process at the same time, currently a browser open with 3 tabs (Google Chrome)
  Csrss.exe - 2 process, the values of different memory of 1820 and 2500 (Client Server Runtime Process)
  nvvsvc.exe - 2 process, different values of 1556 and 2988 (Nvidia driver helper service, worm 191.07) memory
  Pen_tablet.exe - 2 process, the values of different memory of 10112 and 1788 (service) Tablet for driver of consumer
  Svchost.exe - This is listed in 12 different processes under different user names - 3 for the system, local 5 and 4 for network - all with the memory values (Windows Service host process)
  taskeng.exe - 3 process, listed under different usernames of the system, premises and owner (Task Scheduler Engine)
  I'm worried about this because I have recently updated my anti-virus and malware, however this problem is still present. I have no idea what that means or how to fix this and would appreciate any assistance that could be given.

  Hi Mohiten,

  It is normal that you currently live. As the scan came clean, you should be good.

  If you wish, you can try to run a scan online and check.

  Check out the link:

  http://safety.live.com

• R1: tcAPIException: duplicate the element of planning for a task that is not multiple.

  Hello

  I am struggling with the next task:

  I have to ensure that an account exists for a given resource. I have available with la.tcUserOperationsIntf.provisionObject ().

  I created a createUser task to create the account.

  The task code checks to see if it is already matching account.

  If no account does exist, is created in a disabled state, and the State of the object of the IOM account is set to "Disabled" through return code of task mapping.

  If it exists, it is "related" to the account of the IOM.

  The problem is that if the existing account is enabled, I have to change account either IOM "Enabled" status.

  To implement this (thank you, Kevin Pinski https://forums.oracle.com/thread/2564011)) I created an additional task 'Switch' which is triggered by a special task return code. This task is always successful, and his only side effect is the status of being 'Enabled '.

  I'm getting the exception "Duplicate calendar item for a task that does not allow for multiple" permanently:

  This is the stack trace:

  Thor.API.Exceptions.tcAPIException: Duplicate the element of planning for a task which does not multiples. \

  at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject (tcUserOperationsBean.java:2925).

  at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject (tcUserOperationsBean.java:2666).

  at Thor.API.Operations.tcUserOperationsIntfEJB.provisionObjectx (unknown Source).

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method).

  at sun.reflect.NativeMethodAccessorImpl.invoke (NativeMethodAccessorImpl.java:57).

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (DelegatingMethodAccessorImpl.java:43).

  at java.lang.reflect.Method.invoke (Method.java:601).

  at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection (AopUtils.java:310).

  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint (ReflectiveMethodInvocation.java:182).

  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed (ReflectiveMethodInvocation.java:149).

  .. .skipped

  at Thor.API.Operations.tcUserOperationsIntfDelegate.provisionObject (unknown Source).

  ... jumped

  What I did wrong?

  Kind regards

  Vladimir

  Solved. Just forgot to mark the additional task as 'Conditional', then the system has tried to run twice.

• Why CVI have functions that duplicate the functions of ANSI C file handling (ex: Openfile)?

  Why CVI have of file manipulation functions that seem to reproduce the functionality of the ANSI C functions?

  Is there an advantage to using the CVI functions?

  As the CVI was released (1987), until the ANSI-C standard is released (1989) maybe the question should be the other way around!

  In those early days, CVI was supposed to be cross-platform, so it was logical to develop a set of libraries that operate in the same way across the different computers it was targeted at. These days, the focus seems to be primarily under Windows, so this philosophy at the beginning is a bit redundant, especially, as you say, with the widespread adoption of ANSI-C.

  Personally, if there are similar functions in CVI, and ANSI, I'll go for the ANSI, whenever for portability of the reasons, but yet I write code in a number of different programming environments.

  JR

• DUPLICATE LOCKED save project task after os crash

  PC received the updates of windows auto from one day to the next and got "Secure Boot Violation ddetectio invalid signature" message when you try to launch mo morning. Can use only the mouse and keyboard in safe mode. Auto and internandis down. Cannot open a large part in SafeMode as pilots are declining for most. Tech on the phone from asus (my MOM) thinks that updates corrupted my OS and you need to reinstall windows 7.

  Ive worked hard, editing a movie first in a year. How can I save my beloved film?

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  If you do not have to completely erase your hard drive, your project and video files should be right where you save

  I think you can still use the files in safe mode, so copy your project file and video files to a backup disk before proceeding

  You will also need to start using a disk backup program before making any major changes

  Material falls down or virus infections or software simple problems occur, then you should buy AND USE software to make a full backup of your hard drive to a hard drive external USB... more, by doing step by step backup in a new configuration or adding major program makes it easy to go back one step if something does not work

  .

  This backup and then restore is, of course, only to the same computer with a new drive (or the same disc so that you don't mind written on everything) given that do a restore to a new computer will not work because of Windows and many programs with activation information that go with your equipment (which explains why Windows will force you to reactivate if you change much material)

  .

  The product I use is http://www.terabyteunlimited.com/image-for-linux.htm

  .

  Image streams a via Linux bootable CD (the Zip that you download includes a program to make the bootable CD) and it reads EVERYTHING on the disk, even the information hidden, so everything is restored when necessary... and you can not only to restore the image on a messed installation, you can restore to a whole new drive hardware crash and not have to re - install anything (it doesn't have to be an identical car)

• ITunes library and duplicate the items and folders of Windows Explrr

  I have a 2 or 3 General questions on iTunes.  I download all my iTunes on a PC and play really.  That is why the questions about iTunes folders in Windows Explorer.

  1 how to produce duplicates in the library?  I have loads.  I saw the advice to remove them.  This helps a little but it's still a task to be piecemeal.    How to stop what is happening in the first place?

  2 in addition to the duplicates.  Last night I went in Windows Explorer on the PC that I use to download and play iTunes and entered the iTunes Media/Music folder.   I walked carefully each folder album deleting duplicate here.   However, on opening iTunes itself today, duplicates all seem to be still there in the library list.   Why it did not work?  ITunes is not loading the content of this folder?  If this is not the case, why I was informed to support?

  3 What does the symbol of iCloud next to some of the tunes?  If I run the cursor over them, it says 'download '.   But surely I downloaded it when I bought and added to my library?    Why should I download it again?  That this symbol that the melody in question can not play if the PC is offline?

  4 one of the songs in my library list appeared today in my Windows Explorer iTunes Media/Music folder.   I can I have accidentally deleted while I was removing the duplicates it and have now downloaded it in the album in this folder.    Probably so, iTunes library does not constantly in the folder of music on a Windows PC?    He only takes over here if the backup is necessary?

  If so OK but other files appear in the library that do not exist and he asks me if I want to find the file?

  I guess that my confusion stems from the assumption that the iTunes Media/Music in Windows Explorer folder should indicate precisely what will appear in the library in the app.

  Vondegru,

  With regard to questions 2 and 4: iTunes does not automatically "load" all the files in the folders.  You can do an analysis of initial unique optional optional when you install iTunes, which will add all are compatible files in the iTunes library.  After that, files not added unless you take action to add.

• Create/edit task DAQmx vs DAQmxCreateTask

  I just started using Labwindows recently, so I'm a newbie here. You have a configuration great forum and I hope you can help me with that.

  so, as the title indicates what is the difference between the use of these DAQmxCreateTask(), the functions LoadTask() and manually create a DAQmx task using the menu 'tools '.

  Don't they realize the same thing? What is the need for each of them to be here? Am I missing something?

  I have already a little used in Labview. In that, to acquire data, we must use the icon tasks DAQmx to acquire/generate anything. but it is not all available such alternative programming, if I'm not mistaken. so, what's the problem with Labwindows/CVI then?

  Tools > generate DAQmx task launches a wizard that allows you to define the characteristics of the task and create the corresponding code. You can do this by yourself by manually writing individual instructions: this can be useful if you already have an existing code that you can reuse with adaptations little or if you have a special need that cannot meet the wizard or simply if you have the habit of writing code rather than rely on assistants which is my option.

  LoadTask is used to load a task created in MAX and use it in your program. This allows a form of customization of the task without changing the source code, with the obvious caveat that excessive changes in the task can cause the end behavior or abnormal length of program errors.

  All these options are legitimate ways to perform the same operation, a task for the acquisition of coding: know the characteristics of each of them, you can choose one that is most suitable to your purpose and your programming habits.

• CVI 8.0 OR-DAQmx 8.9.5 compatibility?

  New laptop, installed CVI 8.0.1 then NOR-DAQmx 8.9.5 driver provided with acquisition of data USB-6211. Unit works very well with the help of MAX.

  When you select tools/create/edit the CVI DAQmx tasks... a pop message says: "this feature requires NEITHER-DAQmx. Please install OR-DAQ from device drivers CD OR or check your installation. »

  However, NEITHER-DAQmx appears in libraries.

  The sample program compiled Acq-IntClk, but some error message is displayed when the application is run:

  "Procedure entry point not found SetEnableResourceTracking in cvirte.dll.

  "Unable to load nicvidu.dll, check your installation.

  If I continue through errors, the application seems to work.

  Any installation or compatibility obvious problems here?

  CVIRTE to version 9.0.1 update fixed everything.

• task error 50103 name the specified resource is reserved

  Hi all.

  Let me tell you my configuration:

  software: Windows XP sp3, Labview 8.5 fr.

  material: chassis OR cDAQ-9172 with 4 modules installed (in this order):

  1 NOR-9217 (4 RTDs)

  2 NOR-9217 (4 RTDs)

  3 NOR-9219 (4 RTDs)

  4 NOR-9219 (4 RTDs)

  So, I want to acquire 16 temperatures.
  In MAX v4.3, all works well.
   
  As you have aspected, I got the famous 50103 error: "the specified resource is reserved. The operation could not be performed
  such as specified'. «Task name: unnamedTask<9>'.»»   -highlighting of module #2.

  My goal is to read these temperatures consecutively, I mean: mod1 ch0... Ch3, mod2 ch0... Ch3 and so on.
  My program (vi) is like this:

  In a while loop I have a stacked sequence Structure that has 4 frames, each for every DAQ Assistant asigned and configured

  for these modules.
  So I have: Assitant1 for mod1, mod2 Assistant2, and so on.
  Assistants work well in configuration overview mod (I see 4 temperatures on each module).
  But in my program, I got the error above, on module2.

  I read something about this error and I understand that I can not use 2 or more resources at the same time.
  I understand that a resource represents a channel on a module.
  At each end of the DAQ Assistant, I have a Signal from Split (split in 4)
  But with this setup and this algorithm, I guess I read all 16 channels in total consecutively, not at the same time.
  Am I wrong?
  How can I solve the problem?
  Thank you.

  You see that the resource is reserved error because you cannot create multiple tasks in doubles in your program.  Compact data acquisition with modules is essentially identical to one of our PCI/PXI data acquisition cards that you can have that one task duplicate to read from different channels.  So, what you need to do, is use a single daq Assistant and select the channels of all the modules you want to read.  I've attached a screenshot of how to select different channels.

• on the use of the global task

  Hello

  I've been using labview 7 for a long time and I haven't used task. Recently, I've introduced to CVI and I have created all the need for tasks at the launch of the application and reuse tasks before the end of the application. Last week, I received a copy of labview 2013 and I am porting the old code labview for 2013. However, I ran into a problem. Different compiled C code, this code vi must be run each time when necessary, if I create the task on the fly in the vi, it is quite heavy. I would like to create the global tasks so it could be used anywhere, anytime. The example contained in the regulations says that I could create these tasks in MAX. So my question is to use the task only did I specify the name of the task (created in MAX) as the IO channel to use?

  Furthermore, if I create a global task, do I have to delete the task at the end of the application? If I delete the task, global task disappears from the MAX or not?

  Finally, I wonder if it is possible for more than one vi using the same task in different times? For example, I created a global task for the analog output. I run two vi, A and B. A, he use the task to an analogue voltage output while B is something else. After that was done, B uses the same task for another exit. They come in conflict somewhat? What happens if both A and B call the same task at the same time?

  dragondriver wrote:
  

  ...

  Thanks for the clarification. So it doesn't work if I create two tasks the two links on the same channel and I call these two tasks at the same time, right?

  Time to dig the DAQmx help file and check in the DAQmx state transition table.

  Any number of tasks can be created (any reasonable number).

  If all this stuff is sane the task can be verified (if he calls nonexistent DAQmx hardware raises an error and the task cannot be verified)

  If all resources are available (clocks, roads, channels) can be "reserved" (committed) if something else has booked all the resources the task cannot be initiated and DAQmx generates an error.

  In order to have multiple tasks that use the same chanel is perfectly fine, BUT only one can be in one State other than "Verified" use control Task.vi to explicitly states the task of transition.

• code error-50103. Program hangs after the departure of task, readout and task of clearing.

  I'm having trouble with this unique analogue read. The situation is the following. I have a thread that executes a task. The task runs for continuous, but sometimes based on acquisition

  a push of button in the GUI I need one analog reading from a single channel. I firstly to stop the first task, and then create the next task, read and erase and stop it.

  This function is also called via a timer to get a temperature and a resistivity of reading. The timer calls are interested in the temperature and the pressure of the button wants the resistivity.

  Its the same function but can be called at two different instances. I put in a thread variable secure to ensure that he expects to be each other before reading again. It crashes right away,

  It blocks randomely at about the 6th or 7th instance of analog read.

  My first guess after reading the forum LABVIEW on ni.com, is that he doesn't like when I start and disable the task over and over again. Here is the fucntion is called with a handshake goes, but the

  key to watch is the analog read. The handshake stops the task running in the thread momentarily to analog playback and then it starts again.

  I use v9.0 CVI. I use the USB DAQ 6259. The "BOLD" area below is where the error occurs.

  int daq6259ReadCuvette(float64 data[2])
  {
  Int32 daqError = 0;    DAQmx error code
  errorMsg tank [ERRORMSGSIZE]; error message
  int start = 0;     start time
  passed int = 0;    elapsed time
  float64 * cuvetteData;     data
  Seek_set Int32 = 0;    number of analog readings
  errorCluster localError = {0}; structure of local error to store error information
  allocate memory for the data of the Bowl
  If ((cuvetteData = (float64*) malloc (NUMCUVCHANNELS * sizeof (float64))) == NULL)
  memory allocation of {failed
  errorEnqueue (1, -1, __LINE__, __FILE__, "Bowl DAQ task Memory Allocation Failed");
  Returns - 1;
  }

  cuvetteReady (1); define the ready indicator = 1 to stop the task of daq1 in daq1 wire
  Start = clock(); set a start time
   
  While (cuvetteReady (2)) //poll for the tank handles or timeout if the wait is > 5000 ms
  {
  If (gMpvsError)
  Returns - 1;
  Sleep (100);     sleep 1ms to record usage of the processor
  WAIT 1 DAQ LOOP UNTIL SYSTEM SHUTDOWN
  elapsed = clock() - start;
  If (time > = 5000) //check for 5 seconds timeout during the stoppage of work daq1
  {
  errorEnqueue (1, -1, __FILE__, __LINE__, "cannot stop the device DAQ, Bowl was unread");
  cuvetteReady (1);  the ready value = 1 signal to restart the task daq1 in daq1 wire
  Returns - 1;    Returns - 1 as a standard error code
  }
  }
   
   TAKE THE READING OF THE BOWL!
  If ((daqError = DAQmxCreateTask("",&gCuvetteTask)) == 0) //create Bowl read task
  {//create voltage channel
  If ((daqError = DAQmxCreateAIVoltageChan (gCuvetteTask, cuvChan,"", DAQmx_Val_RSE,)))
  (MINVOLT, MAXVOLT, DAQmx_Val_Volts, NULL)) == 0)
  {//DAQmx analog read
  If ((daqError = DAQmxReadAnalogF64 (gCuvetteTask, 1, 10, DAQmx_Val_GroupByScanNumber,)))
  cuvetteData, 1 * NUMCUVCHANNELS, & Seek_set, NULL)) == 0)
  {
  If ((daqError = stop6259DaqTask (& gCuvetteTask))! = 0)
  {
  DAQmxGetErrorString (daqError, errorMsg, 256);
  errorEnqueue (2, daqError, __LINE__, __FILE__, errorMsg);
  }
  If ((daqError = DAQmxClearTask (gCuvetteTask))! = 0)
  {
  DAQmxGetErrorString (daqError, errorMsg, 256);
  errorEnqueue (2, daqError, __LINE__, __FILE__, errorMsg);
  }
  }
  }
  }
  the ready value = 1 signal to restart the task daq1 in daq1 wire. He will leave the while loop
  in threadManagement waiting for the task of the toilet read of the Cup.
  cuvetteReady (1);
   
  If (daqError! = 0) //check DAQmx error
  {
  DAQmxGetErrorString(daqError,errorMsg,256);
  errorEnqueue(1,daqError,__LINE__,__FILE__,errorMsg);
  error return;
  }
   
  If data (Seek_set > 0) //set VAT values read
  {
  Data [0] = cuvetteData [0];   value of resistivity
  data [1] = cuvetteData [1];   the temperature value
  }

  return 0;        No finished errors
  }

  He was crashing at the same point over and over again. Essentially, in order to reproduce this scenario, you have a thread that is running with a task that runs continuously, so you want to stop and

  start a new task with a single read analogue.

  Could you go through this list of 7 possible causes (of the knowledge base) and see if any of those who are causing it?

• Possible tree CVI control without a mouse, using SW

  I received a CVI application that includes a panel with a section of tree control. The task I have to do is to try and automate the current software application to exclude the manual use of the mouse. Anyway is at the interface of a 'tree' by using a gentle approach and not the mouse?

  If you want to run on the control programmatically you can use the features included in this page; to expand or collapse a tree branch for example you can:

  • Navigate to the item in the tree to work on with GetTreeItemFromTag (panelHandle, PANEL_TREE, "thetag", &idx);)
  • Set its State with SetTreeItemAttribute (panelHandle, PANEL_TREE, idx, ATTR_COLLAPSED, 1);

  But I feel that your concept of automation of the program is the ability to operate on the program of a different application act as if it were the user. If this is true, I fear there is no possibility to do so, as control CVI are not standard windows controls (for example, you can get their handful of system).

• Adding channel CJCS virtual/physical to existing task

  Hello

  I have a NI 9211 TC modules that I use to acquire temperatures through LabVIEW 2013 SP1, I have an existing task created in MAX.  I want to follow the CJC temperature sensor as well.  After looking at several positions, I discovered how to assign the physical channel hidden in a virtual channel in LabVIEW and then view the CJC value.  BTW...  Where there is under good which shows how to do this for the cDAQ series... find the 'AI Temp sensor built' is not clear (look under "analog EntrΘe, more").  But that part works now.

  -->, I want to add this channel CJC to my existing job, but I get an error.  See CJC1.vi

  Or, as an alternative, I would like to acquire the CJC temperature and acquire temperatures 8 other channels and then combine them somehow for display, recording, etc.

  Note: I want to keep the data in the format of the waveform, so they work as part of a broad data acquisition program that I have.  And I want to continue to use the existing task as it contains the calibrations (via the wizard of Calibration MAX).

  Here is the error that occurs when I run CJC2.vi with the active disabled code block.  (sometimes not is displayed after you press the Stop button)

  Error-200072 occurred at .vi:7050002 DAQmx Create Channel (I-temperature-built-in sensor)

  Possible reasons:

  Duplicate the layers in the list of physical channels are not supported by this unit.

  Channel name: _cDAQ3Mod1/_cjtemp
  Dual channel: cDAQ3Mod1/_cjtemp
  Physical channel: _cjtemp
  Feature: cDAQ3Mod1

  Name of the task: task of DAQ3

  Attached files:

  CJC1.VI<-- shows="" combined="" code="" and="" it="" throws="" the="">

  CJC2.VI<-- shows="" how="" i="" acquire="" and="" display="" data="" from="" 8-channel="">

  CJC3.VI<-- shows="" how="" the="" cjc="" temperature="" works="" by="">

  Now, how to combine the two?

  Thanks for the help,

  Derek

  Knowledge base seems to be a little confused right now because it only shows the node property for channel playback of strength. It's the correct property to read from a channel of CYC while you use it, but we must also set the CJC channel as an active channel first. The following snippet is the right way to do this in the context of this thread.

  Please note that you must use the built-in CJC source for that to be applicable.