duplicate the found class when debugging.

Similar Questions

• Error: Could not find the com.sun.deploy.ControlPanel of the main class when tried to open the Java Control Panel

  Original title: could not open the Java Control Panel

  I just downloaded a new update of Java 6 and it doesn't work. I use Java to view charts & graphs of changes in the stock market & it works with applications that I used before, but not for that I started to use after the new update has been installed.

  I tried to fix it by clicking on the Java Control Panel & I get this message:

  Class main com.sun.deploy.ControlPanel is not found

  How can I fix?

  Hi Chris240560,

  Try to Uninstall and reinstall java and check the result.

  For further assistance, we recommend you to make contact with The team of Support of Java for better assistance.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Invoke the card works when debugging test but not what device installed

  I sign up a page of my application to be a target for the menu qml share. I have it configured in the configuration xml file.

  Then in the RPC code I have it listen for the call and if it is launch it goes to main.qml and if it is the card call the latter goes to the cardinvoke.qml. Problem is when I run test in Mometics it works fine... the map appears as it is said to. But when I build a release version bar and then transfer to my equipment (after removing the debug version and restart) is instead opening my main.qml when it is called by the menu share. Any ideas why this change? I change all whatesoever of code between the test debug and upload on my device with a Release version. My code is quite similar to the example of invoketarget.

  I've done a 'clean' on the subject project and then exported a release and now it works.

• Duplicate the file appearing when not created

  Hello

  When im working on my company network, I get duplicate records appear, if I delete the duplicate, it deletes records its duplication why is it and what are the causes.

  What can I do to avoid it as its driving me nutts

  Hi sarahbaker143,

  (1) work on a domain network?

  If Yes, then you must follow the link below and ask your question in the Forum-

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps!

• functions in the document class when the main timeline reached a framework

  Hello

  I have 3 functions in my document class main I want to run when the main timeline reaches a specific frame number.

  How do I do that?

  See the code and comments

  public void mainClass()

  {

  //stage declaraction

  stage.align = StageAlign.TOP_LEFT;

  stage.scaleMode = StageScaleMode.NO_SCALE;

  stage.addEventListener (Event.RESIZE, stageResized);

  wrap these next 3 lines in an if statement so maintimeline currentframe = x

  position().

  loadXml();

  initArrowButtons();

  slideTimer = new Timer (timer_delay);

  slideTimer.addEventListener (TimerEvent.TIMER, nextSlide);

  }

  You can always know what the current picture is by reading currentFrame peoperty:

  public function mainClass() {     addEventListener(Event.ENTER_FRAME, onEnterFrame);}
  
  private function onEnterFrame(e:Event):void {     switch(currentFrame) {          case 1;              frame1Function();          break;
  
            case 2:              frame2Function();          break;
  
            // etc.}
  

• The main class is not found

  Hi all
  I am facing problem when I try to create the JAR file.
  After creating the Jar file I tried to run but error message
  Main class not found.
  
  I follow these steps
  (1) my WordNetOK.java

  import java.io.File;
  import java.io.FileNotFoundException;
  import java.util.Scanner;
  import edu.smu.tspell.wordnet.*;
  
  
  public class WordNetOK{
  
      public static void main(String args[]) throws FileNotFoundException {
  
  System.setProperty("wordnet.database.dir", "C:\\Program Files (x86)\\WordNet\\2.1\\dict\\");
  WordNetDatabase database = WordNetDatabase.getFileInstance();
        String result = "";
          NounSynset nounSynset;
          NounSynset[] hyponyms;
     
          //creating File instance to reference text file in Java
          File text = new File("C:/javacode/WordNetin.txt");
        
          //Creating Scanner instnace to read File in Java
          Scanner scnr = new Scanner(text);
        
          //Reading each line of file using Scanner class
          int lineNumber = 1;
          while(scnr.hasNextLine()){
              String line = scnr.nextLine();
        Synset[] synsets = database.getSynsets(line);
        for (int i = 0; i < synsets.length; i++) { 
        String[] wordForms = synsets.getWordForms();
  
       for (int j = 0; j < wordForms.length; j++) {
  
  System.out.println(wordForms[j]);
  
       }
  
            }
  
  
  
  //System.out.println("line " + lineNumber + " :" + line);
  
  
  
  lineNumber++;
  
  } 
  
  
  
  } 
  
  
  
  }
  2) Javac WordNetOK.java
  
  it create a class file
  
  3) i create Manifeast.txt 
  Main-Class: WordNetOK
  4) i run this
  C:\Javacode > jar cvfm WordNetOK.jar Manifest.txt WordNetOK.class
  Adding manifests
  adding: WordNetOK.class(in = 743) (out = 435)(deflated 41%)
  5) i tried to execute it as * java -jar WordNetOK.jar *
  
  But error appear could not find main class
  C:\Javacode > java-jar WordNetOK.jar
  Exception in thread "main" java.lang.NoClassDefFoundError: WordNetOK
  Caused by: java.lang.ClassNotFoundException: WordNetOK
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
  The main class is not found: WordNetOK. Program ends.
  
  
  C:\Javacode >
  Note : i execute the classpath at beginning
  set PATH = C:\Program Files\Java\jdk1.6.0_32\bin;
  set the classpath = C:\Program Files\Java\jdk1.6.0_32\bin;\javacode.
  
  
  Edited by: Ayham on Apr 6, 2013 7:39 AM
  
  Edited by: Ayham on Apr 6, 2013 7:41 AM
  
  Edited by: Ayham on Apr 6, 2013 7:45 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
  			 
  Why are you creating your own manifest file? Let just for you Java.
  It works for me using 1.6
  C:\Javacode>jar cfe WordNetOK.jar WordNetOK WordNetOK.class
  
  C:\Javacode>java -jar WordNetOK.jar
  Hello World.
  
  Generally, you should leave a tool (e.g., Netbeans, Ant) create the manifest because they know how to do it properly.
  		   

• Alert to be fired only for the first record, when there are duplicate entries

  Hello
  
  This is related to the fact of Oracle 10 g.
  I have a block record multi in which I entered and save some codes, something like below
  
  Code Description
  =====================
  AAAAAAAAAAAA ABCD
  BBBBBBBBBBBBB PQRS
  GENEVIEVE DAVIS
  ABCD DHGFKSDHKSHG
  PQRS DFJHHGS
  EEEE SDT85604ET
  =====================
  
  Now I need to post a warning/msg to go when-validate-the field Code. So now if I'm on the first record, the alert/msg will appear for code ABCD which is Ok. Now, on the next album, I get a different code PQRS as indicated above, the new alert appears which is Ok. If I enter a code that has been previously entered into the record block multi and alert/msg had been exposed to the only first alert/msg need is not displayed now know if I enter ABCD again the fourth record, the alert should not be displayed.
  Note that this must be done at the time of data entry itself. I guess that maybe it can be done by using groups Records / table plsql.
  
  Help with a way to solve this matter will be highly appreciated...
  
  Thank you and best regards...

  As you have already guessed, you must be able to keep track of how many times a value has been entered. If you know what all the possible values of 'CODE' at design time, you can create a counter for each value variable, but it would be a total pain. A better solution would be to permanently keep a total dynamics you can quickly check against. For this I recommend you use a group of registration of forms. Take a look at the demo of Forms - record group treatment (duplicate values check) I wrote. Using the packet of forms Rec_Group condition in this demo, you can easily change the process listed in the working document in your scenario. Follow all the steps in the demo. For your situation, you must change the when-validate-Item trigger so that instead of checking the dupicates and omitting the form if a duplicate is found, you check the number of entries to a value in the record group and display a message if the number is 0 or not to display a message if the number is greater than 0. Your modified WVI trigger might look like this:

  DECLARE
     ignore     NUMBER := 0;
     bignore   BOOLEAN := FALSE;
  BEGIN
     IF ( :YOUR_BLOCK.CODE IS NOT NULL ) THEN
        ignore := Rec_Group.Get_Number(Rec_Group.rg_name, :YOUR_BLOCK.CODE);
        IF ( ignore = 0 ) THEN
            -- Display your message
        ELSE
            -- Don't display any message
        END IF;
        /* add the code to the record group */
        bIgnore := Rec_Group.Add_Value(rec_group.rg_name, :YOUR_BLOCK.CODE, :system.trigger_record);
     END IF;
  END;
  

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

  Published by: Silvere March 30, 2011 15:07

• Firefox Help my firefox top bar has been changed, I used to be able to get the file to bookmarks Format printed, and other services that I have found useful when you take information from the internet, where they went, I want them back?

  Firefox help

     Search
  

  "Found 0 results for" my firefox top bar has been changed, I used to be able to get the bookmarks printed Format file, and other services that I have found useful when taking information from the internet, I found bookmarks to the right of the new game to the top, but it seems not instantly friendly where they went, I want that they come back? »

  See:

  • https://support.Mozilla.org/en-us/KB/menu%20bar%20is%20missing

• Watch does not recognize the weight class as exercise-how can you add the duration of activity manually because none of the presets eg elliptical etc. is appropriate. Also does not count calories for example 35 when the rest of the group is around 500

  Look does not recognize the weight class as exercise-how can you add the duration of activity manually because none of the presets etc for example elliptical is appropriate and therefore do not count toward the daily goal. Also does not count calories for example 35 when the average of the others in the group is around 500.

  Hello

  When you use the application of the training session, choose the type of activity that best fits your business. For anything else - like weight - select the other category.

  During the follow-up of one year to the next helps:

  • Activity app will credit the ring of progress of exercise with one minute for every minute of the workout.
  • Active calories will be based on the data recorded by the heart rate sensor or a brisk walk, whichever is greater.

  Note, however, that the heart rate sensor is likely to give better results for the workouts that involve rhythmic (for example running) rather than the irregular movements.

  More information:

  Use of the workout on your Apple Watch - Apple Support

• iPod 120 GB Classic is recognized by iTunes, but it will not be synchronized. I ran the diagnostic. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, it says that no device was found. It didn't Sync befo

  I have a version of the software running iPod Classic 2.0.4 of 160 GB. The iPod has not been synchronized for more than a month. I did diagnostic tests today. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, he said that there was no iPod found. I checked and installed new updates, but it is not always sync. I restarted iTunes and computer, but it is not always sync. I ran a diagnostic on the device and it showed that it was operating normally.

  The iPod must be configured to synchronize automatically.  If this is not the case, click Sync does not synchronize no matter what.

  Select the iPod in iTunes, so that you see the iPod settings screen in the iTunes window.  Along the left side of the window, in the sidebar, under settings, click on music.  To the right, you will see a settings screen of the iPod music , where you tell iTunes how to sync songs to the iPod.

  NOTE: All the songs on the iPod that are NOT in your iTunes library (on the computer) will be lost.  If all the songs are in your iTunes library, no problem.

  At the top of the window, check the box to Sync music.  This enables automatic synchronization.  Below, select the option to synchronize library of ensemble music, if you want to 'all' in your music library to sync.  At the bottom, click on the apply button.

  From now on, when you make changes to your iTunes music library (like add new songs or update a playlist), iTunes automatically updated the iPod with the same changes when you connect (or click sync , if already connected).

• Prevent the child class dependency when the conditional use disable to specify the class in the development environment

  Hello

  I develop an application that I want to run on the normal systems and in real time using LabVIEW Proffesional Development System 2012 SP1

  To control how the application interacts with the user, I created a class that defines the type of user interface behavior that should allow me to have nice dialog boxes when the system is running on a machine windows and no dialog box (or any other friendly code in non-real time) if they sail on a real-time target.

  The parent class is the code that suits the actual time and the class of the child is the one with dialog boxes.

  To control the class of which it is responsible, I have a structure conditional disable. It works fine when the application is built in an executable or executable file in real time, but the problem arises when I want to use the code during development on the target in real time.

  I think that with the application under a target in real time (RT PXI), the proper case of the conditional - disable is enabled for the parent class is used, but the child classes are also listed under dependencies - I pressume it's because they exist on the block diagram in the case of persons disabled conditional turn off the diagram.

  This means that I can't deploy the code on the target in real time as it is unhappy with the class of the child code - even if it will never run.

  To save the poster my real project, I created an example with a Parent and child class and a flag to disable conditional 'class' to illustrate the problem.

  If you run Test.vi, you will see that the child class always gets locked (i.e. is addictive) while running even if it is not called.

  So - basically my question is: is what I can do about it or will I enough to disable it with conditionals and simply put the constant to correct class on the block diagram in the tests?

  Thanks in advance

  John.

  I feel your pain.  I came across something similar some time back.

  Apparently official NOR position is that you have to put a conditional structure of Disable IN EVERY ONE OF YOUR CLASS live.  In the Windows screws, you simply have a case of empty disable conditional with the windows code in another case and vice versa on the RT.

  I also much prefer the method you describe...

• I found the track record, when I deleted it I lost all my videos folder, and when I checked in the Recycle Bin that they were not there.is there a way to restore?

  Original title: restore the follow-up case

  am usind windows vista and I found the track record, when I deleted it I lost all my videos folder, and when I checked in the Recycle Bin that they were not there.is there a way to restore?

  Hello

  Once removed the HDD data can't be recovered. However, you can use your favorite search engine to browse third-party data recovery software and use this software to recover data.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also view the following link to recover lost or deleted files and try the steps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

• [ACCIDENT] Crash when using ' equal to ' function of the String class

  When I use "equal to" function of the String class to compare 2 channels, the app will crash.

  Examples: pn_infopush.equals (PN_INFO_TIMER)

  I have to use "is" instead of "equal". The application will run normarly

  Does anyone have any idea who? I don't understand why.

  Thanks for your support!

  Hello

  Is there a chance that your variable can get a null value?

  Calling .equals not a null object can cause this.

  What type of exception you get? Can you provide a stacktrace?

• I get the following popup when I start my Acer laptop with Windows 7 - Microsoft dynamic C++ Debug Library...

  I get the following popup when I start my Acer laptop
  with Windows 7 and I use Google Chrome as My browser - I would like to know how to
  it stop what happens when windows starts. -Thank you--->
  Dynamic Microsoft C++ Debug Library
  program: C:\Windows\system32\igfxsrvc.exe
  File: D\Program Files\Microsoft Visual Studio
  9.0\VC\ATLMFC\INCLUDE\atlcom.h
  Online: 2475
  Expression: 0 & "communiqué called on a pointer that has.
  already been released.
  For more information on how your program can cause a
  the assertion failure, see the Visual C++ documentation on
  argues.
  (Press Retry to debug the application)
  Choice to follow:<--Not seen="">
  Abort Retry Ignore

  Hi Chris,

  This problem may occur because of the conflict between certain third-party applications.

  We will start the computer Safe Mode to check if the problem occurs in Mode without failure. If the problem does not occur in Mode safe, then you can try to set up your computer in a clean boot state to find what startup item or service is causing the problem.

  Step 1:
  To restart in Safe Mode, see the link.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not occur in Mode without failure, then you try to put the computer in a clean boot state.

  Step 2:
  To perform Clean boot follow the procedure below.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• One or more of the pictures in this message could not be found. When you send this message, these photos will not be included. Youi are sure you want to send this message?

  Our compuoter crashed and all programs had to be re installed.  Now Windows Live Mail 2011 send no more anchored images.  When I try to send I get the following: "one or more of the pictures in this message could not be found." When you send this message, these photos will not be included. Are you sure you want to send this message? "How to restore the ability to transmitted pictures?

  Hello

  If you are having problems with Windows Live Mail, I suggest you to report your application in the Windows Live Mail forums for assistance.

  http://www.windowslivehelp.com/product.aspx?ProductID=15