Similar Questions

• HP officejet 6500 general printer error error (bed 0 x 61011) refer to the printer documentation

  My HP 6500 office jet suddenly decided to not print and gives me the following message is displayed:

  "error error general printer (bed 0 x 61011) refer to the printer documentation" I have no idea what this means, and don't know how to fix it. Can someone help me? Puleeese?

  Usually the 0 x 6 * point of errors to a carriage jam on the printer.  I will need to know the exact model of the 6500 Series printer you have to point you to the right measures to clear up this problem.  You have the model E709a, E709n, E710a or E710n of the 6500 Series?

• All-in-one HP Photosmart C5280. You get an error message... Refer to the printer documentation

  You get an error message... Refer to the printer documentation

  Can you estimate the level of ink in its entirety for each cartridge, by looking at the gauge of printer ink?  See step 3

  Have you recently had a paper jam?

• Table of contents of the printed Documentation

  How can I specify the location of the table of contents in the printed documentation? I would like it to appear after the title page, but it still appears before her.

  It's true. The title page which is created by the printed documentation is a default start page that you have little control over. If you imported a word document that already contains a title page that does not appear before the table of contents because the HR doesn't recognize it as such. Those of us who create print usually do as you describe. We create a generic title page that is stored in a separate word file. Then we generate the output and copy the frontispiece. You need to remove the title page of the printed good documentation process, otherwise you'll end up with both of them! I hope this helps.

• Tables resized in the printed documentation

  RoboHelp HTML Version 6
  I create a new project.
  I add topics using Word as editor of my.
  I have added tables to topics. All of them are specified as being broad of 7.6 "(740 ou 760 pixels vus sur un écran, parfait pour 800 x 600)."
  Also, when I print with a margin of 0.45 '' on each side, 7.6 "wide perfect for printed documents.
  
  I spend 3 months in the creation of this project with 150 pages of printable documentation.
  
  I'm going to export to either. DOC or. PDF and get the same results whether:
  About 50% of my paintings have been reduced to 6 "wide. The other tables are still off the coast of 7.6 ".
  
  I call for technical support from Adobe and explain this. They try to reproduce the problem and are able to replicate. They do not have an answer immediately, but agree that it should not act like this. The rep and I phone and email each other for a few days. I finally end up talking to another representative who can provide an answer. She is back to her supervisor, who tells me that he doesn't have an answer, but it it will escalate to tier 2 Technical Support.
  
  Level 2 called me and said that he is "expected behavior," that RoboHelp's on purpose.
  "HALF of my paintings is shrinking to 6 inches and leaves the other half 7.6 inches?
  "No', he answers:" it must shrink them all at 6 inches. "
  
  I told him I do not buy this response, that RoboHelps printed documentation must have the same appearance as it does on the screen.
  
  He says that he will be a representative technical level 3 call me, but I didn't get a call.
  
  Can someone please tell me what should I do to have my printed documentation come out looking the way it does on the screen?
  
  Thank you.
  -Sean

  We found the problem and, for once, the word is not the guilty despite the code seen.

  It seems that if you create a table in Word and there is no cell merged, when HR generates printed output, it sends the word width set unless it is greater than the width between the margins when it evolves to the table at this width.

  If, however, the table merged cells, it does not get reduced and saturations margins.

  Having both types of table makes the difference. Cheeop is now returned to Adobe about this and I hope that when it receives a response, it will mark it as the answer.

• Positions lost in the printed documentation

  Today, I tried to generate printed documentation.
  We put our real estate topic of subject titles and use the MyTitle < /title > < title > tag to show this change as a topic title.
  If I generate a Word document, these titles get lost somehow.
  
  Does anyone know how to fix this?
  
  MS Vista 32 bit
  MS Word 2007
  7.02 RoboHelp

  I found the way.

  In your topic, RoboHelp, or model of the section insert this code:

  
  

  MyTitle

  
  

  This automatically inserts the title of the topic of the subject properties in the RoboHelp topic and it is exported to Word, due to the

  Tag,

• HP PHOTOSMART C5280 "Message of ERROR" print CARTRIDGES, refer to the PRINTER DOCUMENTATION

  My HP Photosmart C5280 All in one will not print.

  It has a flashing orange sign.

  It displays "Print cartridges refer to printer documentation".

  It was working fine yesterday and then just stopped. The cartridges were unchanged.

  Cannot find anything on this problem in the Basic Guide.

  Have printer is off and unplugged but WARNING reappears when returned to service.

  All possible solutions would be appreciated.

  Hi Hallam123456789,

  I see that you are having problems with your printer.  I'll take a look at the document below.

  Incompatible cartridges

  Let me know how it goes.

• Ink system failure. Cannot print. Error: 0xc19a0021. HP C5180. Refer to the printer documentation.

  Printer HP Photosmart C5180 all-in-One. Scanner. Copier

  Windows 7 64 bit

  My computer is a Gateway Intel Core 2 quat

  640GO 4 GB DDR3

  Can I turn off the printer and turn on a few times and then it will start working. Very annoying.

  The message you are getting indicates a serious problem with the printer.  This document will help you to solve the problem when it comes to the top.  If the problem comes back, you may need to replace the printer.

• Get the merge fields in the printed documentation

  I print my help from Robohelp 11 on Word document and I get what looks like merge fields in the text, usually in the topics.

  I think they can be keywords index.

  How can I get these fields out of my document?

  They do not remove if I select and press Ctrl F9 keys.

  Thank you.

  Looks like you have display fields enabled in Word. Turn that off and it should be OK. If the paragraph marks are also displayed, their deactivation may be sufficient.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• How to remove an old topic that comes up constantly in the only printed Documentation output?

  When I generate Documentation printed in my project, I get this error around a topic that I have deleted several days ago and prevent the chapter being created in Word output.

  

  When I go to the section for the printed Documentation configuration screens, she appears as being missing. There is no way to delete the topic while in this form.

  

  The theme/html file no longer in my project. I deleted the subject through the HR interface (as opposed to just delete in Windows). I have no broken links, and WebHelp output generates very well.

  Is there some file HR, I can edit in Notepad which will delete this topic one?

  Just realized you hear this arrow - that did the trick!

  

• A message that says a cartridge is missing or damaged. See the documentation for the printer.

  HP Photosmart 7200

  Message says a cartridge is missing or damaged.

  Consult the printer documentation

  Operating system - Windows XP

  Hello WDY68

  Your question relates to the product is a commercial product. I suggest you post in the forum for HP Business Support for a better chance to find a solution.

  Here you will find business advice.
  http://h30499.www3.HP.com/T5/business-support-forums/CT-p/business-support

• persistent fault message on the printer to HP photosmart 7200

  I get the message "0x6100004c general Printer Error, refer to the printer Documentation."

  When I go into settings it is said, "there is a problem with the printer or the ink system.  "Turn the printer off, then on.  I did it several times without success.

  The ink levels are fine.

  I am able to fax.

  Help.

  Hi MillVally,

  I am pleased that you have found a video to help you through the steps.

  I recommend you to call HP.  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  As mentioned, the HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  Even if it is out of warranty, give them a call, it is always interesting to see if there is anything they can offer.

• Please help, the printer does not have 'ink system failure '.

  Hello

  Any help appreciated.  My printer is printer all-in-one Photosmart C7280.

  2 days ago my printer has not worked. It comes with several error messages after I turn it on. The first is "ink system failure: ink system has failed." Cannot copy, receive faxes or print. Refer to the printer documentation. Error: 0xc19a0025. Turn off the power, then new. »

  However when I turn off and then again via the "power" button, I get a message saying "abnormal termination. Then the same error message original returns (0xc19a0025). It is the most common error and won't go away. Then too, I get a message saying "problem Photo tray: lift the output tray, check the photo tray is pushed up to the stop, lower output tray. Despite the fact that I haven't used the photo tray in several months and it is in the correct position.

  So far I tried to turn on the printer, shut down several times by using the power button. Also, I turned off the printer in making last night (after having been closed properly) and back on this morning. I looked through the documentation of the printer, but could not find tips for troubleshooting for this kind of problem. I updated the driver from HP using software update on my mac, and the problem is still there.

  Now I get desperate, I rely on my printer/scanner/copier a lot!

  Thank you

  Nathalie

  This widget could not be displayed.

• table of contents printed documentation has elements out of order

  When I print a pdf document by using the printed Documentation option, some of the elements in the table of contents are out of use; the list of projects and the Table of contents are identical.

  Any ideas?

  Thank you

  No,

  Never mind... figured it out.

• Placeholders (breadcrumbs, Mini-TOCs) doesn't show not in printed Documentation

  I have included placeholders (bread crumbs and mini-table of contents) in Master Pages. They work as expected for the release of HTMLHelp, but when I generate printed Documentation (.doc), they are not there.

  I checked for if sure I have not has not accidentally assign a condition online only (I have not).

  I use RoboHelp 9 (RH9). I have to do something special?  I just tried applying specific printing condition to bread in the foot and using this condition when generating, but that did not help.

  You get bread crumbs or mini tables of contents in the printed documentation.

  I have not seen the absence of bread crumbs as a problem because they are simply a way to navigate on the screen and would be of no use in print. Mini Tocs however describe what is in this 'chapter' and should be included.

  The more people who report a bug or request a feature, more likely, he will be executed. Please follow this link.

  http://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform&product=38

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge