table of contents printed documentation has elements out of order

Similar Questions

• Table of contents in the pdf documentation

  Hi people,
  It's me again, hehe.
  I tried to make a printed pdf documentation for an already existing RoboHelp project, and points to the table of contents are totally weird. Odd in what sense? I have the major points of the content mentioned briefly, or not at all, but they are in the normal TOC, however the 'License agreement' subject is detailed point by point, and I have no need that.
  My question is, does anyone know where the content of the table of contents in the printed PDF documentation could be configured?
  Everything works now nice and dandy outside this little thing, and I would like to have straightened out.
  Thanks guys,.
  Bogdan

  That's what I thought too, but every time that I was trying to make the documentation in pdf format, I received a short table of contents with too much insistence on the license agreement, which I do not remember asking.
  I tried to find where I could control that, and I've not found anything, I posted this topic in the forum while waiting for someone to give me some advice.
  As I was still experimenting more, I thought about the .doc where I can easily change the table of contents as I have Office installed on my system.
  As I was trying that, I forgot to remove the check mark from 'create pdf' and I got both the doc and pdf documentation. To my surprise I discovered that two documents, being identical to the content, more in the table of contents that my previous pdf was, showed well I don't change anything in the settings, because I have not found anything to change.
  So I opted for the creation of the doc, edit the table of contents (it still has too much emphasis on the license agreement, but I have enough focus on other subjects now) and export to PDF doc.
  It's the whole story.
  Bogdan

• Table of contents on the alternative networks

  Hi all

  I don't know if I'm the only one having this problem or the workflow. We make proposals in a brochure, and they often require the table of contents. Normally, the proposals are very similar. Often the header changes, but the content is the same. It all depends on the Vice President and the customer receives the proposal. Thus, when the headers change, the table of contents must match. So, I could just crush the headers, updated the table of contents, but then a few days later, I have to return them to the previous headers, update the table of contents again.

  So my solution is alternative layouts. Two very similar proposals, with different headers, which must also new TOC to match these headers.

  My problem is that I can change the parent TOC, but not the child or the second alternative provision. Don't update or I would update the table of contents because it is grayed out.

  Just frustrated. I could simply create a new file, do a save as, but then, I have several files which are technically identical, with one header is different.

  I am currently using Adobe Creative Cloud on a Windows 7 platform.

  I tested it, but there is not a lot of options to choose from. I chose Replace TOC in force, but which does what it says and replaces the table of contents with all the headers from these two layouts. I can't have two COT separated on two separate provisions and have both update with their corresponding page headers.

  Thank you

  Mike

  When InDesign engineers added a new feature (like replacing the CS6 provisions), they usually have a customer need (or needs) in mind, and they try to implement in many ways that this new feature relates to the older features as they can.

  Alternative layout functionality, frankly, was mainly intended for developers who create applications tablet. The tablets can also display horizontally and vertically and may have several different pixel dimensions and pixel ratios.

  Although this feature can also be used for printing applications, it's that it was mainly intended for. I have demonstrated to classes how you can use this to create several posters size or prospectus for printing, and the feature works very well. However, I think you have run into a "side deal" that engineers predict.

  I think the function table of contents was not part of their way of thinking, nor their tests, and the two functions don't seem to not work together. I suggest you request a feature here:

  Adobe - feature request/Bug Report Form

• Incorrect time in the table of contents

  I have a 8 s sliding for more than a minute long. After mounting, the TOC always shows the time 01:26 and does not update. Saved as a new file, no change.

  Clues?

  I have tried resetting the table of contents, but duration of slides is adapted in real time, no reset necessary.

  Type securities, may I offer a tip? Label the slides instead of typing the slide titles in the table of contents. For a higher level, group slides, labeling the Group and this will appear as a top level heading in the table of contents. This has not only the advantage that resetting the table of contents will keep these labels, but they are also very useful in other cases, some examples:

  • If you want to use the jump to the slide, you can choose the label of the slide instead of the number
  • The advanced interaction, in the branching view, you'll see labels for slides instead of numbers
  • You can reduce the groups in the film strip
  • You can apply a master slide to a group

  

• In the table of content design

  Can anyone help please?

  I have a problem with the creation of table of contents and change the order of the paragraph styles. For example, in the document, I have the title and the author defined as style. I want the author to come first, followed by the title with a page number in the table of contents. I get almost work, but page numbers are disabled.

  Thank you

  In the table of contents, you have two options for the order, pages or alphabetical order. If you use the command page, ID goes to the things on the list in the order that he finds them on the page, and he starts the search in the upper left corner and works down before moving to the right.

  You may be able to solve your problem ensuring that the name of the author is in a framework that extends to the left that part of the chapter title. A screenshot of the page in question would be a big help, with the contours of the block and the display invisible characters. Use the camera icon on the edit page of the Web site to integrate the image.

• Out-of-order of Microsoft for automatic activation phone

  To the right,.

  My self updated Windows Vista Ultimate SP 2 64-bit requires an automatic validation by telephone. I wrote for a week Tel. 01 800 527 2000 of the Mexico, but the only response is " ¡Servicio not available in! . (Service unavailable).

  Therefore, I note that telephone number Mexico 01 800 527 2000 has been out-of-order at least a week.

  Thank you

  Contact Microsoft Support via chat and they can activate the software for you, you can check the link below for their cat. In the link provided, use "Microsoft products and General Service surveys.

  http://support.Microsoft.com/contactus

• Table of contents of the printed Documentation

  How can I specify the location of the table of contents in the printed documentation? I would like it to appear after the title page, but it still appears before her.

  It's true. The title page which is created by the printed documentation is a default start page that you have little control over. If you imported a word document that already contains a title page that does not appear before the table of contents because the HR doesn't recognize it as such. Those of us who create print usually do as you describe. We create a generic title page that is stored in a separate word file. Then we generate the output and copy the frontispiece. You need to remove the title page of the printed good documentation process, otherwise you'll end up with both of them! I hope this helps.

• Table of contents: sequence of elements of evil

  In my paper (no service book used), each section begins with two sections: first paragraph Style 1, then 2 of paragraph Style. In the table of contents, I need the setting, conversely: Style of paragraph 2 above, followed by paragraph 1 below Style.

  However, in the generated table of contents, headers appear in the same order as in each section. Has anyone an idea what goes wrong?

  In a case like this, you may need to 'wrong' ID by doing what you want. You can do this by adding some kind of nonprintable framework (put it on a nonprinting layer, set attributes for non-printing or make the invisible text by setting fill on [none], the last being the worst choice) with one of the titles. If it is on the same layer, it can be hung in the text stream is moved during the edition with the rest of the text. Add the title that you want the list in no particular order to this framework by using a unique style, not the one used in running text and indclude this style in the TOC instead of the running text. This will allow you to position managers correctly compared to them to get your titles in the correct order, but it's a pain.

  When I do the non-printing of stuff like what I like to make it really obvious mode layout, so I usually use red text. It can be easy to forget that there is something invisible if you don't see it, and the next guy makes mounting it will also appreciate if you don't hide things.

• Tables resized in the printed documentation

  RoboHelp HTML Version 6
  I create a new project.
  I add topics using Word as editor of my.
  I have added tables to topics. All of them are specified as being broad of 7.6 "(740 ou 760 pixels vus sur un écran, parfait pour 800 x 600)."
  Also, when I print with a margin of 0.45 '' on each side, 7.6 "wide perfect for printed documents.
  
  I spend 3 months in the creation of this project with 150 pages of printable documentation.
  
  I'm going to export to either. DOC or. PDF and get the same results whether:
  About 50% of my paintings have been reduced to 6 "wide. The other tables are still off the coast of 7.6 ".
  
  I call for technical support from Adobe and explain this. They try to reproduce the problem and are able to replicate. They do not have an answer immediately, but agree that it should not act like this. The rep and I phone and email each other for a few days. I finally end up talking to another representative who can provide an answer. She is back to her supervisor, who tells me that he doesn't have an answer, but it it will escalate to tier 2 Technical Support.
  
  Level 2 called me and said that he is "expected behavior," that RoboHelp's on purpose.
  "HALF of my paintings is shrinking to 6 inches and leaves the other half 7.6 inches?
  "No', he answers:" it must shrink them all at 6 inches. "
  
  I told him I do not buy this response, that RoboHelps printed documentation must have the same appearance as it does on the screen.
  
  He says that he will be a representative technical level 3 call me, but I didn't get a call.
  
  Can someone please tell me what should I do to have my printed documentation come out looking the way it does on the screen?
  
  Thank you.
  -Sean

  We found the problem and, for once, the word is not the guilty despite the code seen.

  It seems that if you create a table in Word and there is no cell merged, when HR generates printed output, it sends the word width set unless it is greater than the width between the margins when it evolves to the table at this width.

  If, however, the table merged cells, it does not get reduced and saturations margins.

  Having both types of table makes the difference. Cheeop is now returned to Adobe about this and I hope that when it receives a response, it will mark it as the answer.

• Can someone just list all the reasons that may explain why some elements will not be displayed in a table of contents?

  Extremely frustrating. I've set up a catalogue, all the section headers I want to appear in the table of contents are tagged with the same paragraph style, but he simply refuses to include some of them - after a certain point in the book. I looked at all that I can think of to try to see what is different about these elements - and nothing. I have searched forums, cannot find a response - perhaps because it is a general question. But there are several reasons why for example the Annotator gradient may not appear in artificial intelligence (another thing that drove me crazy)... hoping someone similarly list the main factors that can break a table of contents, and I hope that my answer will be there somewhere.

  Nothing wrong with Win 7 (my OS of choice).

  This seems very unlikely in your case, but check to make sure that you have not the multiple styles with the same name in the groups of style or with capital letter.  You might want to try this, too: remove minor corruption by exporting

• How we can print the page numbers for the shape of the TABLE OF CONTENTS when her excluded from the form page count?

  Hi Experts,

  We have the TABLE OF CONTENTS, followed by 100 forms totally 215 pages.

  We checked in the exclusion of the option of number of form page SUMMARY form at the level of the group.

  Followed forms of TABLE OF CONTENTS forms all use FORMSETPAGENUM rule at the bottom of page.

  the first form followed by TABLE OF CONTENTS form the number starts page 1 of 215 and the last form closes at 215 215.

  Now, I want to print the Page number of SUMMARY form only.

  How can do us?  Any thoughts?

  Kind regards

  RAMAN C

  Hello Raman,

  I guess that you included "Exclude the number of pages" option in the form of table of content (TOC).

  There is a limitation in the studio. The functions of page number (PAGE NUM OF FORM / FORMSET PAGE OF NUM) will be ineffective when we choose the option "Exclude the number of pages" in the form of table of contents. Therefore, you was not able to print many pages of form as a table of contents.

  The only way to print the number of pages is to deselect the option "exclude the number of pages. Then you can print the number of pages in the table of contents in the form of table of contents normally. However, this number of pages in the table of contents will add to the Total number of pages form set. The number of pages all forms can be controlled by Postransdal using the script [FORMSET PAGE NUM = TotalPages() - 1]

  Kind regards

  Mahesh

• RH 9 - printed: Table of contents is not be generated?

  All trying to generate a PDF of the chm.project manual, I adhere to the General measures. Double-click on printed documents and in the dialog box, make sure that under content to select the Table (the same that is used in the chm.project) contnets. However, when I generate the PDF file all is swell next to the missing Table of contents?  This applies to a generated word one. What Miss me?

  You have the table of contents in the section Section layout of your printed documents SSL:

  

• Has anyone who has worked with doc us MIL - STD and generated with the success of the page numbers in the table of contents?

  I'm creating a template using FrameMaker 7.2.

  MIL - STD dictates works package (such as chapters) page numbers in the format: 0001-1, 2-0001, 0002-1 and 2-0002, etc.

  The problem I encounter draws in this format of the page number in the table of contents generated.

  I used a variable on the Master Page, and generate page numbers in each package to work properly.

  I know that in point 7.2 of the FM, you cannot include a variable in a table of contents generated.

  So I tried changing the variable on the Master Page to text using a paragraph tag (WPnumber), but have not gotten it either works.

  Tried all the other stuff I could think of, too.

  In my view, a part of the problem is that FM cannot have leading zeros when you set the page number or chapter (understandable 99.9% of the time).

  If anyone has suggestions or solutions, I am very interested to hear.

  Thank you.

  1Editor - and puzzled

  I already manually put the zeros.

  I just want to be clear that strikes the zeros directly on the master page does NOT have to include in the table of contents. You then type in the context of the reference to the table of contents also. In addition, you must have separate template and reference pages for chapters 10, 11, etc., in order to obtain the number of zeros correctly.

  With my method, the zeros are introduced as part of the chapternumber itself, in the chapter number of the TEXT. You still have to type but only once for each file.

• Unable to print and it says out of paper, but I added paper & he still reading error & troubleshooting said it was what has been detected

  I always work on windows 7

  My printer does not work, continues to say it is out of paper, but I added paper & he still reading error & diagnosis said that was all that was detected. I have all my update updates. I have to uninstall my printer & reinstall?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that this printer is not working.

  I suggest you to refer to the suggestions by Rohit Chettri Moderator Forum Microsoft responded on 22 September 2012 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-on-printer-HPPhotosmart-5510-says-out-of/d5f16575-4ABC-419A-94b4-ec50e59f5534

  You can also check:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Table of contents has foreign words!

  I generated a TOC in 2015 FM. I get foreign words in it as a NOTE:, TIP:, etc. (attach file)

  Check the reference to the table of contents page and remove entries from <$paranum>of the various paratags that you specified for the table of contents.