during the day updated clock

Similar Questions

• How we prevent persistent reboots during the day on desktop

  You need to restart our computer of the two or three times during the day.  Turn us your computer in the morning and leavit turn it on during the day, then it turn off during the night.  What is going on???

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• dc5800 Small Form Factor: dc5800 closes during the night or during the day

  My dc5800 Small Form Factor has been stop under its own when not in use, for example during the day or night. When I restart, I get the black screen where it asks if I want to start normally or in safe mode. After startup, it asks if I want to find a solution to the problem (which does not return anything). It never happened while I use the computer. He did periodically, but lately, it's every day. Help?

  Solved the problem by changing some power settings. for example the definition of disk hard do not stop, pc to never sleep, etc.

  You don't know if it's a good thing or not, but the computer turns off when I'm not using it.

• Why my laptop wireless computer connect to the internet first thing in the morning and late at night, but not during the day.

  I wonder if you can help me please?

  I have problems with my satellite internet access on my laptop wireless.  He beautifully connects to the router and the signal is excellent. However, I'm unable to connect to the internet.  I can use the laptop first thing in the morning because it connects right away, but I would say that 95% of the day I can't use it at all.  Sometimes it will work later in the evening.  I learned this could be due to the intensity of the signal and that some suppliers to fall during the day.  My desk top connects perfectly (if the weather permits it) but is not on the wireless network.  I had no problem with my laptop when I used my previous service provider.  It becomes more frustrating that the inability to use the internet visited my lap top unnecessary.  I can't use it on my neighbors wireless network no problem at all but they we internet different provider.  Can you please help because I don't know why it works first thing in the morning and sometimes late at night, but not during the day?  No matter where the lap top is the first thing in the morning, it will work even if it is forty feet away.  I can sit during the day with my phone right by my router and it still not connect to internet even though the router signal strength is excellent and desktop is on the internet.  Any help would be great, because it leads me into the wall!  I am using WIndows 7 on my lap top from acer.

  Kind regards

  Julie

  I would like to thank everyone for their help with my question.  I can tell you now that I have it solved and I'm pretty embarrassed to say the least.  Following a change of internet service provider, I put a cable into the wrong port on the router... silly me!  It works perfectly now. Thank you once again.

• Windows 8 crashed during the last update, now wants to save and may not do.

  Windows 8 crashed during the last update. Stuck at 30% for more than 4 hours before I finally pressed the power button to restart the system. Windows 8 Pro with Media Center now says system build 9200 at the bottom right of the screen.

  Whenever I try to activate Windows 8, it cannot connect. When you use the command prompt Windows + R and slui 3 with my purchased serial number I get Code 0 x 80070424. Description: The specified service does not exist as an installed service.

  Hello

  This error can appear if your firewall settings prevent Windows to complete the online activation process. To resolve this problem, you can activate Windows by phone instead.

  1. Enter in the right edge of the screen and then click on Search.
     (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)
  2. Type SLUI 04 in the search box, type or click on applicationsand then tap or click SLUI 04.
  3. Follow the instructions on the screen.

  Hope this helps

• During the day agenda appointment disappeared

  A few weeks ago, I bought a Centro by Verizon. I had a Palm Z 22 before that. When I loaded the Palm software for the Centro, a bunch of my appointments during the day for any offbeat 22 Z exactly one hour later on the desktop, then transferred it to my Centro. Now, tonight, I see that all appointments before 17:30 for every day during the day disappeared. Each appointment during the day on my desk calendar disappeared. My Centro them still has on it, but I'm afraid what I hotsync, them, the Centro will be think that they were all deleted on purpose and do the same thing.

  What should I do to recover my desktop calendar and what the hell happened to do only during the day go away?

  It is a little more troubling. I have never had any trouble with the software of my Palm in eight years.

  Thank you

  Hello

  first of all, check the palm desktop user name

  If the user name on the Palm Desktop is the same as on the centro ANS still there is no data
  You can set the hotsync Manager to "handheld replaces the Office" on the calendar

  Message relates to: Palm TX

• In Istore during the application update comes first it puts up-to-date but that after a day he again comes that I store for release on the same date that I've already updated.

  I upgraded store shows erratic behavior

  I had something similar happens a few times a month. E same app kept saying he needed an update. Another symptom was that the icon was showing an update was available, but when I went to the screen updates, the install button changed to the button open before I had the chance to type.

  I have fixed by opening the app, double tapping the home button, hit to swipe the application to the top of the screen and then perform a hard reboot.

  It happened once more after that, but the same routine fixed again and he has not done since.

• Adobe CSXS InfrastructureCS6 Installation failed. Error code: U44M1P7 for CS6 during the exchange update

  Adobe CSXS InfrastructureCS6 Installation failed. Error code: U44M1P7 for CS6 during the exchange on Windows 7 update.

  Please advise... It seems that some programs the CS6 have day, simply not PS, I or some other needed programs for my current courses.

  Thank you

  TJR

  Try following the steps in this blog post:

  http://acrobatninja.com/2013/07/fixing-CSXS-infrastructure-update.html

• iPhone disconnected during the software update

  My iPhone 5 has been connected to iTunes on my PC and I started a software update.  The phone disconnected during the update due to a bad cable.  Now my phone is locked to the screen update showing the apple logo.   I can't turn off it normally to reboot and iTunes does not recognize the phone when I plug it back on my PC.   Any ideas?

  Use the recovery mode as described here.  You may try to go into recovery mode more than once to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Firefox slows gradually (during the day) to the point that it is not exploitable. Restart works, but sick of rebooting. Tried implementing up-to-date and refresh, disable the addons

  Windows 7 with the latest updates. Latest Firefox 38.0.1.
  Typing slows down to the point that it's frustrating and I need to restart firefox. When the computer reboots, all right. Then after a day or two, it slows down again. I have run Norton malware scans. Hardware acceleration disabled. No other applications running.

  Almost ready switch to Chrome...

  Suggestions?

  Thanks to all those of you who looked at my problem and made suggestions to solve them.

  I decided to go there and try Chrome.

  Since it was not an agreement on the solution to my problem solid (different approaches have been proposed) and I had already tried one number of other approaches based on firefox help, I decided that I had invested enough time to solve the problem and that I would move.

  I always use firefox on my other computer with Windows Vista because I do NOT feel the creeping slowness problem and that he had to constantly restart firefox to regain normal performance on this computer. It uses the same version of firefox.

  Thank you all...

  -Simon

• Satellite A300 does not start after extinction during the BIOS update

  Hello

  I tried to update the BIOS after reading a TOSHIBA TEMPRO alert, after some time, apparently not run so I ran a second time, then both ask of BIOS appeared in the taskbar only and it froze while I did not start the upgrade or anything like that I had to the power off.

  I tried to restart, but now, it just on the screen stays black (the monitor is not powered, as if the system was not running), all LEDS are powered with flashing 'drive access', the led on the DVD Player keeps flashing making a noise every 3 seconds or more.

  I read on the forum that there may be no solution but to take it to an authorized service provider but I'm willing to take any possible solution before you do.

  Thanks for any advice.

  Alex.

  Hi, mate

  Unfortunately, you need to be reflash the Bios as something that went wrong during the update. You should contact the Asp and ask them to reflash. There is no other way to get your laptop to work.

  Good luck!

• Satellite A200 - 1 GB block during the bios update - will not turn on

  Need help please, I was updating of the bios. And the process is stopped at: 2/18. I wait an hour and i decided to turn off the laptop. Know I can't turn on. Nothing happens. Anyone know how the recovery mode?

  Thank you

  (Sorry for my bad English)

  Josefa Hello,

  It sounds as if you of the BIOS chip was damaged during the attempt to update failed, and unfortunately this will prevent you from starting your laptop so that you can tyr to redo the update.

  In my view, that it will be necessary to bring or send the laptop to a Toshiba authorized service agent who has the equipment necssary to re flash your BIOS chip.

  Kind regards

• Error code 80070424 during the application update the window and installing the Apple Application Support

  Hi guys,.

  I am running Windows Vista Premium Home 64 bit. This all started when update me my iTune recently and since then it has been a headache after another. Basically, when I try to install iTune, it says that I need to install Apple Application Support first, and when I do that, I get the following message appears:

  "An error occurred during the installation of assembly"Microsoft.VC80, CRT, Version... ". "and it lights up.

  In addition, I also tried to install Vista SP 2 recently but my window update also gives me a pain. I can't get the update because when I try, it says 80070242 error code - Windows Update encountered an unknown error.

  Here are the pictures of the 2 filters:

  • The problem of Apple Application Support
  • The Windows Update error screen

  Any help at all would be greatly appreciated.

  Thanks for the suggestion of Augustine, but the problem is still present. The order went through, but I always feel error 80070424 and is possibly due to a malfunction of Windows Installer Module.

  Thanks for the attempt. Appreciate it.

  Suggest you check to see if the Windows Modules Installer service is present, has not been disabled and can be started.
  Right click the computer on the desktop or the Start Menu and choose Manage
  The UAC prompt to enter a password if one is used, then click on continue or Yes.
  If no password is used, click on continue.
  Click the arrow next to Services and Applications
  Click Services in the left frame
  Scroll down the list of Services in the context of e right until you come of Windows Modules Installer .
  If it is present, check under Startup Type to see if it has been disabled.
  The default setting is manual.
  At the top left will be a link to start the service
  Click on it and see if the service can be started.

  If the installer of Modules of Windows is disabled, right click on it and choose Properties .
  Set the startup type to Manual , click on apply, OK.
  Close the computer management console.

  If the Windows Modules Installer is not present and of Flavius are too difficult for you to follow, then replace
  Contact MS Support free of charge.
  Start here
  Make a mark next to "I use it for my own personal use.
  Now click on the button continue.
  Click on the I accept"" button.
  Support options will be displayed. The only option I see here is for email support.
  Click on the button continue to access the support request form.
  Fill in the fields and then click on the button continue.

  MowGreen Services consumer safety update

• Connection reset during the firmware update

  I have a Linksys router WRT54GS (v5). I noticed that my firmware was outdated and he tried to update tonight. During the upgrade path, the browser will reset the connection and now can't access my router configuration pages.

  I did a hard reset. Then I did the 30-30-30 reset.

  The reset worked, but no matter what I do, I can't navigate to any readable page in the router. I get the log in box and was able to connect on the router. However, the configuration pages are all jumbled and devoid of useful information. It looks almost like a web page that needs flash to be enabled. Many colors and boxes, but no text or links to other pages of configuration

  I know it's an old router but it has served me well. I would like to reinstall the old firmware (or new!) and copy my saved on the router configuration file.

  Is this a hopeless situation?

  Is there a way to access the configuration via a command line interface?

  Please, any help would be greatly appreciated.

  In fact, thank you for your answer but I posted too soon. I just find a solution to my problem.

  Rather than attempting to rewrite the original record of people, I will copy and paste below.

  I found this fix on the following site:

  http://en.kioskea.NET/forum/affich-87540-can-t-view-Linksys-router-Web-page-WRT54G

  Scroll to the comments section and find the one of "elmo21". The discovery of the answer of "Lynn". I hope this helps someone.

  It worked like a charm for me:

  Lynn - December 12, 2009 2:59 pm GMT

• BlackBerry Smartphones New - fatal error during the first update by using the Office Manager phone

  During my first update using the Desktop Manager, there were 13 steps, and I had to unplug to half way through.

  Now when I try to repeat the process, the update gets steps 1-6 and just after reconnecting to JVM (step 6) I get a "fatal error update device software, please try again" I tried several times and it always stops in the same place.  The phone then has the radio turned off, and I have to restore the connections.

  I'm not an irritable person, so any help would be appreciated.

  Thank you!!!

  Never disconnect during an update. Never.

  This is therefore a new phone, follow the instructions below.

  First, remove the battery from the BlackBerry when lit, to subject a minuite, replace and see if it restarts. If this is not the case, continue below.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.