during the passage of presentation filter operators varibles takes as "equal" operator

Similar Questions

• Wheel rotation during the passage of the apps

  Hello

  I frequently meet the spinning wheel during the passage of the apps. For example an app can do one, but open window have not been used for a while and then when I click on the window to use it I get the wheel spinning for a few seconds.

  I am running Yosemite 10.10.5 on a MacPro Mid 2010) with 16 GB of ram and 12 GB available on the 300 GB SSD drive. I just realized that maybe space on the boot drive may be the cause, so I'll empty now and update if there is no change.

  Also, my SSD is a 500 GB Samsung SSD 840 EVO media and I think that the TRIM is not enabled? I read that TRIM was not based with SSDS of third party on my machine and was picking up information contradictory as to the time it was a problem or not. The lack of TRIM could be the cause of the spinning wheel?

  Duane

  You ran a 'cleaning', 'optimize' or 'speed up' apps on your Mac?  Have you installed an antivirus software?

  The 12 GB of free space must be sufficient and not to be the cause of the problem. Don't let him get any small however.

  

• HP LaserJet Enterprise 600 m602 slow printing during the passage of the trays

  Hello world!

  On the HP LaserJet Enterprise 600 m602, who met breaks in print jobs during the passage of the trays?  Example, we are going to print invoices and we have a rule configuration that prints on plate 2 with the exception of the last page that is perforated paper tray 3.  So, in a job of 5 pages, pages 1-4 are the tray 2 paper... then page 5 is perforated tray 3.  There is a 2 to 3 seconds when the last page is extracted from tray 3.  If the invoice is only 2 pages, the print job appears super slow.

  This printer was working fine with no delay until we applied the firmware 2302786_433718.  Now, the delay is very noticeable.  We do not know if it was intentional or not in the new firmware.

  We use the latest PCL 5 Universal Print Driver.  The only thing that has changed is the firmware.  We even tried a full reset of firmware.  Problem is still there.

  I worked with HP support, but we were told to wait... the next version of firmware that may or may not fix everything.

  Any help or insight is appreciated.

  We have this same problem with our printer HP Laserjet 600 M602.

  Could solve by setting the Print Mode to all papertypes that are used for the same parameter.  We thought initially can be a problem, issue or firmware of the Board of adjustment, but in reality was the paper type settings. We set up printer for ordinary paper into tray 2 and tray 3, default regular bond has been set at light mode printing and binding for the print mode binding. Each time dial-up printer and trays, he stops to configure different paper type settings.

  Hopefully the other help solve their printing problems

  Enjoy your day,

• CC in Lightroom on Windows 10 crashes during the passage of the library to develop.

  Everyone has a problem with Frost during the passage of the library to develop modules in Lightroom on Windows 10 CC?

  Hi mgmagney,

  This could be because of the graphics processor.

  Go to the Lightroom preferences > performance > uncheck 'use the graphics processor' > restart Lightroom, and then check out.

  Kind regards

  Claes

• Larger images Popup during the passage of the mouse on the photos (was: in Dreamweaver CC 2015...)

  I have thumbnails that I would have larger popup on the passage of the mouse. Can't do it in any way. Any help?

  Here is an example usage of CSS3 transform:

  div #socialmedia a {img:hover
  -webkit-transform: scale (1.3);
  Transform:scale (1.3);
  -ms - transform:scale (1.3);
  }

• Void string formula during the passage of several values of variable presentation

  Dear all,

  I have a scenario where I will get one or more presentation variable values, and each value should create a separate chart where each graph should filtered by a single value.

  For example: If suppose that my presentation of the values of variable passing as below.

  IN ("ASTON MARTIN", "KIA", "PEUGEOT", "DACIA")

  Then I should get four chart:

  as the first chart report filtered by ASTON MARTIN

  as the second chart report filtered by KIA

  as the third graphic report filtered by PEUGEOT

  as the fourth graphic report filtered by DACIA.

  Kindly help me out here.

  Thank you

  In your non-text expression expression may be only "Dim MBV CSD". "' @{RF1} {Lk Veh Vehiclemake}.

  Then

  LOCATE(',' || cast("Dim MBV CSD"."@{RF1}{Lk Veh Vehiclemake}"as varchar(1000)) || ',',  ',' || '@{L1}{FIAT,FORD}' || ',') >0
  

  PS

  But in this column (if is not text) you'll never find values 'FIAT', 'FORD' etc.

  Make sure that your model and reports are correct.

• Funny blue noise appearing in the shadows during the passage to develop Module

  When you change the photos below, after having paid a graduated filter the shadows of the image turn blue, the blue color disappears when I switch back to the library module.  The blue noise does not appear when I export the image or film or the browser.

  Any ideas?

  Thanks in advance,

  Henry

  Version of Lightroom CC 2015.3 release 6.3 (Mac)

  

  That the superposition break.  Click on the white triangle in the upper left corner of the histogram to turn it off.

• bottleneck during the passage of the redo log files.

  Hi all
  
  I'm using Oracle 11.2.0.3.
  
  The enforcement team has indicated that they are facing slow at some point.
  
  I followed the database and I found that at some passage of redo log files (not always), I am facing a slow at the application level.
  
  I have 2 son since my database is CARS, each thread has 3 groups of multiplexed redo logs the FIU, with size of 300 MB each.
  
  Is it possible to optimize the switch of the redo log files? knowing that my database is running in ARCHIVELOG mode.
  
  Kind regards

  Hello

  Yes, Oracle recommends 1 validation by 30 calls from users or less. Of course, every database is different, so this rule cannot be taken too literally, but in your case, this rule seems to apply. In any case State, 900 undertakes seconds it looks like a very large number and the need for a high number of transactions should be questioned. You should talk to your analysts/application management/enterprise architect if warranted - that is to say if the application does in fact almost 2 000 business transactions per second.

  What about DB CPU: here is a link to a blog that I wrote on this subject, it should help to better understand this number:

  http://Savvinov.com/2012/04/06/AWR-reports-interpreting-CPU-usage/

  But briefly: DB processor isn't a real event, it is simply an indication that the sessions are on CPU (or waiting for CPU) rather than wait on i/o requests or events in the database. It is not necessarily a bad thing, because the database must perform tasks and he cannot do without loading the CPU. It may indicate a problem in two cases: when the CPU usage is close to the limit of the host (OS stats section indicates that you are very far from there) or when the CPU is a % of DB time - in the latter case, this could mean that you are making too many logical reads due to inefficient plans or analysis too. In any case, this does not apply to you, because 20 percent is not very high a number.

  Other items in the list of the top 5 deserve attention, too - gc buffer busy acquire, gc current block busy, enq: TX - line lock conflict.

  To summarize, your database under a lot of stress - whether it is the legitimate workload, and if this is the case, you may need to upgrade your hardware later. There is chance that it isn't - for example a high number of runs may indicate that rather than to bulk operations database code using PL/SQL loops, which is a big performance killer. Check "Top SQL by executions" about whether or not this is the case.

  Good luck!

  Best regards
  Nikolai

• CFC - URi too long during the passage of text string to CFC

  I have a page that allows the user to save a large block of text which is held in a < div > tag to the database without reloading the page through cfajaxproxy and a cfc.
  
  When you click on 'save' a javascript function draws text of the div block and stores it in a javascript string, which is then passed into a cfc using cfajaxproxy as a parameter to the javascript function. (ie. functionName (theTextBlockString);). It works fine except if the text contained in the javascript string var gets too long and causes a URi too long message.
  
  Display of the request in firebug, that I see the cfc is called via a GET request, which causes all my input parameters that I placed in the service to be placed in a GET url string, so of course when it is a long block of text, only the URL query string is too long, and I get the message too long URI of the CFC.
  
  What I'm trying to understand, is how hell I can pass a large text string in the EFA without encountering this problem. Is there an alternative application method so that I can't use GET?
  
  Thank you in advance!
  
  Dave

  I found the setHTTPMethod parameter used during initialization of a cfc to cfajaxproxy - you can change it to a POSITION which obviously solves the problem. Adobe, mark POST by default as AJaxCFC, CFAjax, etc.! Maybe theres some reason to have default GET, who knows...
  

• Persistent variable during the passage through a URL

  Hello
  
  I'm passing a number of variables via a URL in order to sort a set of data. The problem I have is that if I as a form of submission on the same page, such as a drop-down list to select a certain status, or a list of items I can check, variable that I initially passed with the URL seems to replace all what I enter in the form, do not forget that the shape and the URL variable have the same name , which they need in order to function properly. Is there a way to release the variable passed when I submit the form? Or maybe I should pursue an alternative for the sorting of the data?
  
  I condensed the following code, the variable "sorter" went through the column header so that the same criteria is passed in the update page in order to properly SLEEP the same set of data that was originally presented. But if I want to change my criteria "sorter" to something else by selecting it from the drop down list I get the old data "sorter" I was looking at previously. Somehow, I need to be able to release the variable "sorter" so that I can submit a new variable. I have the same problem in different code using check boxes to create a selection list to refine the dataset.
  
  Thanks in advance for your suggestions.
  
  < name cfquery = "TST" datasource = "#dsname #" >
  SELECT *.
  TST
  When status = #stats #.
  order of #sort_order #.
  < cfif sort eq 1 >
  / / DESC
  < / cfif >
  
  < / cfquery >
  < do action = "" method = "post" > "
  < table >
  < cfif kind NEQ 1 >
  < th > < a href = "tst.cfm? sort_order = id1 & sort = 1 & stats = #x # > section 1: < /a > < /th >"
  < th > < a href = "tst.cfm? sort_order = id2 & sort = 1 & stats = #x # > point 2: < /a > < /th >"
  < cfelse >
  < th > < a href = "tst.cfm? sort_order = id1 & sort = 2 & stats = #x # > section 1: < /a > < /th >"
  < th > < a href = "tst.cfm? sort_order = id2 & sort = 2 & stats = #x # > point 2: < /a > < /th >"
  < / cfif >
  
  < cfoutput query = "TST" >
  < b >
  < td > #id1 # < table >
  < td > #id2 # < table >
  < / cfoutput >
  < /table >
  < select name = "stats" onChange = "submit ()" >
  < option > < / option >
  < option > A < / option >
  option < B > < / option >
  C < option > < / option >
  D < option > < / option >
  < / select >
  < / make >

  If you don't reach your variables, cold fusion is looking for variables in the url before searching for form variables. Create a local variable that gets the value of the form variable if it exists and the variable url if the form variable is not there and use the local variable in your query.

• Screen turns off during the passage of programs (version 38)

  Second time thanks to this... It started yesterday. When I tab (switch) between programs on my desktop, the thunderbird display shuts off. Sometimes, he returned in a few seconds. Otherwise, if I click on the Calendar tab and then return to the e-mail tab, it clears... until I have turn back. This does NOT happen with other open program windows. There is no upgrade for all programs that I know. Very annoying.

  I reinstalled 31.7.0 and the problem disappeared. Had tried the betas v.38 and they did the same thing. Very strange and I was about to go to another client, because it was so boring. Party at the moment. Whatever it is, it has to do with v.38.

• Overview of e-mail list 9.3 cup during the passage of the mailboxes

  Since the upgrade to El Capitan and the new Mail (9.3) when I switch between the mailboxes, the preview of the list is cut as shown in the screenshot below. If I resize the preview pane displays the full text of the preview of the list, but this is obviously not optimal. I searched around and don't see reference to it as a known bug. Any ideas?

  

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• GMail and Google Plus constantly disconnected during the passage of the accounts

  Hello

  I recently installed Chrome. I know that it is a native product of Google so it will work differently, but one of the things that makes me want to move permanently to use it is that I can not have multiple GMail accounts open at the same time, what if it's just me on the computer and my firewall and virus scanner is updated should not make a bit of difference on security. But in Firefox if I have my main GMail account that opens my Google + account is attached to and then open my account of GMail arts I'm logged out of Google. I'm sorry it's ridiculous. So if you want to avoid that users who don't use Facebook and have multiple accounts GMail but only Google + account you guys really need to understand the right code to allow multiple GMail accounts to stay open. Also, if I 'Add account' to Google + drop zone in showdown at the next restart Firefox these accounts have disappeared. In Chrome, they stay. So, there's some glitchy stuff going on out there.

  I do not want someone chime and tell me to add in other accounts to my main account, is not the purpose of this post. I am well aware of this capability in GMail and I choose not to use it for personal reasons.

  Thank you

  Richard McCormick

  Make sure that you do not run Firefox in private browsing (permanent) mode.

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • Uncheck the box: [] "always use the navigation mode private.

  If you use is not Private Browsing Mode

  • Tools > Options > privacy > history >
  • Firefox will be: "use the custom settings for history":
  • Letter: [X] accept Cookies from sites
    • Accept third-party cookies: "to visit".
  • Continue until "they expire".
  • Uncheck the box: [] 'clear history of Firefox closing. "
  • https://support.Mozilla.org/KB/clear+recent+history

  If you use a software like CCleaner cleaning then check the settings in the Firefox application.

• Satellite A300 - 1EC Win XP: BSOD during the passage of external display

  Toshiba Satellite A300-1ec almost new, with Win XP sp3, all updates, drivers of toshiba Web page

  When I use the extended via tv (s-video) output option, everything is ok.
  But when I try to change the display, extended (or any display mode double) to a single screen (laptop)... I get a blue screen

  He said something nvidia... but it's not very useful

  someone knows more?

  Hello!

  The Microsoft Knowledge Base, I found an article about this BSOD:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;827663

  In addition, I think it might be the hardware problem, in my opinion the RAM.
  Test the RAM with Memtest86: [www.memtest86.com]

  Maybe reinstall Windows to solve the problem.

  Good bye

• Apple music shuts down during the passage of the songs with Beats

  Well, then it is obviously a problem with iOS 9.2, because it has not fixed the beta 9.2, and it wasn't a problem with iOS 9.1. Last night, I upgraded my iPad and my iPhone iOS 9.2. I own a pair of Beats Studio Headphones Wireless. Every time I play a piece of music from Apple, and I want songs in the middle of a song, if I don't pause, the song plays for half a second, then shuts down and disconnects from my helmet. I also noticed this problem very rarely in the iOS 9.1, but it was only music app to another app with the sound, not just in changing songs. Please help me because it's very annoying to have to turn off my helmet and again between each song. Also, sometimes it glitches and getting a continuous noise on a song and I have to reboot my device. If there is a patch for that soon it would be much appreciated.

  I had the same problem. I plugged my Wireless Studio Beats and checked my firmware using Updater bat and found out there was a (2.1.8) update. After you have installed and (importantly) not matching and rematching the beats of my iPhone, Apple music was working normally again, and I was getting disconnected when changing tracks more. Hope this works for you also.