Void string formula during the passage of several values of variable presentation

Similar Questions

• Wheel rotation during the passage of the apps

  Hello

  I frequently meet the spinning wheel during the passage of the apps. For example an app can do one, but open window have not been used for a while and then when I click on the window to use it I get the wheel spinning for a few seconds.

  I am running Yosemite 10.10.5 on a MacPro Mid 2010) with 16 GB of ram and 12 GB available on the 300 GB SSD drive. I just realized that maybe space on the boot drive may be the cause, so I'll empty now and update if there is no change.

  Also, my SSD is a 500 GB Samsung SSD 840 EVO media and I think that the TRIM is not enabled? I read that TRIM was not based with SSDS of third party on my machine and was picking up information contradictory as to the time it was a problem or not. The lack of TRIM could be the cause of the spinning wheel?

  Duane

  You ran a 'cleaning', 'optimize' or 'speed up' apps on your Mac?  Have you installed an antivirus software?

  The 12 GB of free space must be sufficient and not to be the cause of the problem. Don't let him get any small however.

  

• HP LaserJet Enterprise 600 m602 slow printing during the passage of the trays

  Hello world!

  On the HP LaserJet Enterprise 600 m602, who met breaks in print jobs during the passage of the trays?  Example, we are going to print invoices and we have a rule configuration that prints on plate 2 with the exception of the last page that is perforated paper tray 3.  So, in a job of 5 pages, pages 1-4 are the tray 2 paper... then page 5 is perforated tray 3.  There is a 2 to 3 seconds when the last page is extracted from tray 3.  If the invoice is only 2 pages, the print job appears super slow.

  This printer was working fine with no delay until we applied the firmware 2302786_433718.  Now, the delay is very noticeable.  We do not know if it was intentional or not in the new firmware.

  We use the latest PCL 5 Universal Print Driver.  The only thing that has changed is the firmware.  We even tried a full reset of firmware.  Problem is still there.

  I worked with HP support, but we were told to wait... the next version of firmware that may or may not fix everything.

  Any help or insight is appreciated.

  We have this same problem with our printer HP Laserjet 600 M602.

  Could solve by setting the Print Mode to all papertypes that are used for the same parameter.  We thought initially can be a problem, issue or firmware of the Board of adjustment, but in reality was the paper type settings. We set up printer for ordinary paper into tray 2 and tray 3, default regular bond has been set at light mode printing and binding for the print mode binding. Each time dial-up printer and trays, he stops to configure different paper type settings.

  Hopefully the other help solve their printing problems

  Enjoy your day,

• CC in Lightroom on Windows 10 crashes during the passage of the library to develop.

  Everyone has a problem with Frost during the passage of the library to develop modules in Lightroom on Windows 10 CC?

  Hi mgmagney,

  This could be because of the graphics processor.

  Go to the Lightroom preferences > performance > uncheck 'use the graphics processor' > restart Lightroom, and then check out.

  Kind regards

  Claes

• Larger images Popup during the passage of the mouse on the photos (was: in Dreamweaver CC 2015...)

  I have thumbnails that I would have larger popup on the passage of the mouse. Can't do it in any way. Any help?

  Here is an example usage of CSS3 transform:

  div #socialmedia a {img:hover
  -webkit-transform: scale (1.3);
  Transform:scale (1.3);
  -ms - transform:scale (1.3);
  }

• ODI scenario failure during the passage of variables as parameters in the scenarios of the child

  I have defined a script in such a way that the variables in this scenario will pull data from other tables of configuration and pass those values as parameters to another this scenario in the first scenario of parent. I tested in DEV and DEV, test environments that are shared with the same topology with repositories different works. It has worked well. But when I moved the code to the QA environment, then I get the following error message. While attemption to run the scenario with the following command,

  Execution code:

  OdiStartScen '-SCEN_NAME = XXXXX ""-SCEN_VERSION =-1 ""-LOG_LEVEL = 5 ""-PROJECT_NAME. "" "" PASS = # PROJECT NAME. V_PASS""-PROJECT_NAME.» DB_URL = #PROJECT_NAME. V_DB_URL""-PROJECT_NAME.» DB_SCHEMA = #PROJECT_NAME. V_DB_SCHEMA""-PROJECT_NAME.» DB_LINK = # PROJECT NAME. V_DB_LINK""-PROJECT_NAME.» DB_USER = # PROJECT NAME. V_DB_USER ".

  Error message:

  oracle.odi.oditools.OdiToolInvalidParameterException: error when setting the parameters on the tool

  at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:618)

  at com.sunopsis.dwg.function.SnpsFunctionBase.getSunopsisApi(SnpsFunctionBase.java:494)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeOdiCommand(SnpSessTaskSql.java:1431)

  at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:44)

  at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:1)

  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1889)

  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:580)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)

  at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)

  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1066)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: java.lang.Exception: disagreement quote...!

  at com.sunopsis.core.SnpsObject.extractParametersLine(SnpsObject.java:174)

  at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:580)

  ... 18 more

  The variable values for this new environment a probably double-quotes ("") or a special character which is to 'break' the command line. Use this trick ODI to understand all the variables values used in this step and use the values of the test in a procedure separate with just values, not variables:

  http://devepm.com/2014/02/28/execution-variables-trick-for-old-versions-of-ODI/

  It will be useful.

• Persistent variable during the passage through a URL

  Hello
  
  I'm passing a number of variables via a URL in order to sort a set of data. The problem I have is that if I as a form of submission on the same page, such as a drop-down list to select a certain status, or a list of items I can check, variable that I initially passed with the URL seems to replace all what I enter in the form, do not forget that the shape and the URL variable have the same name , which they need in order to function properly. Is there a way to release the variable passed when I submit the form? Or maybe I should pursue an alternative for the sorting of the data?
  
  I condensed the following code, the variable "sorter" went through the column header so that the same criteria is passed in the update page in order to properly SLEEP the same set of data that was originally presented. But if I want to change my criteria "sorter" to something else by selecting it from the drop down list I get the old data "sorter" I was looking at previously. Somehow, I need to be able to release the variable "sorter" so that I can submit a new variable. I have the same problem in different code using check boxes to create a selection list to refine the dataset.
  
  Thanks in advance for your suggestions.
  
  < name cfquery = "TST" datasource = "#dsname #" >
  SELECT *.
  TST
  When status = #stats #.
  order of #sort_order #.
  < cfif sort eq 1 >
  / / DESC
  < / cfif >
  
  < / cfquery >
  < do action = "" method = "post" > "
  < table >
  < cfif kind NEQ 1 >
  < th > < a href = "tst.cfm? sort_order = id1 & sort = 1 & stats = #x # > section 1: < /a > < /th >"
  < th > < a href = "tst.cfm? sort_order = id2 & sort = 1 & stats = #x # > point 2: < /a > < /th >"
  < cfelse >
  < th > < a href = "tst.cfm? sort_order = id1 & sort = 2 & stats = #x # > section 1: < /a > < /th >"
  < th > < a href = "tst.cfm? sort_order = id2 & sort = 2 & stats = #x # > point 2: < /a > < /th >"
  < / cfif >
  
  < cfoutput query = "TST" >
  < b >
  < td > #id1 # < table >
  < td > #id2 # < table >
  < / cfoutput >
  < /table >
  < select name = "stats" onChange = "submit ()" >
  < option > < / option >
  < option > A < / option >
  option < B > < / option >
  C < option > < / option >
  D < option > < / option >
  < / select >
  < / make >

  If you don't reach your variables, cold fusion is looking for variables in the url before searching for form variables. Create a local variable that gets the value of the form variable if it exists and the variable url if the form variable is not there and use the local variable in your query.

• Dashboard of the guests and by setting a variable presentation selection

  I have two columns in the table fast edge State Agency (prompt1) and Region (prompt2). State Agency drop-down list values from one column in the db table, but the values of a column different region depends on the selection of the national agency. Each State has a different set of values of the region.
  
  Example: State Agency has values in drop-down list S1, S2, S3, S4 etc... all in the same column db State Agency. On S1 selection in prompt1, list values drop-down area (orders2) must be filled with the column "S1-regions", in the same way on the selection of S2 to prompt1, values in the orders2 must come from the column 'S2-regions' etc...
  I defined a variable presentation for prompt1 @stateAgency and written a Case statement for orders2 something like that
  
  SELECT
  CASE
  WHEN '@stateAgency' = 'S1' THEN 'State Sun '. "" S1-regions. "
  WHEN '@stateAgency' is 'S2' THEN 'State Sun'. "" S2-regions. "
  WHEN '@stateAgency' is 'S3' THEN 'State Sun'. "" S3-regions. "
  ON THE OTHER
  "Sun State '." Regions by default"
  END
  IN THE "domain".
  
  It load regions by default for the first time but no change in the values of orders2 once I make selection in prompt1. Any suggestion would be appreciated.
  
  FYI: It's OBIEE 11 g.
  
  Thank you
  Tom
  
  Published by: user3130064 on July 26, 2011 07:43

  Alright... your syntax of presentation variables is wrong. It should be
  SELECT
  CASE
  WHEN ' @{stateAgency} "="S1"and"State Dim"THEN". "" S1-regions. "
  WHEN ' @{stateAgency} "="S2"THEN"State Dim"". "" S2-regions. "
  WHEN ' @{stateAgency} "="S3"THEN"State Dim"". "" S3-regions. "
  ON THE OTHER
  "Sun State '." Regions by default"
  END
  IN THE "domain".

  Missing parentheses... Also, be sure to change the formula of the second guest to all static values column in the "orders2.

  I hope this helps...

• passing multiple values of variable presentation to go the url in dashboard

  Hi all
  
  I use go url in dashboard in the area of text using html file mark up. We have a guest area which saves the values in the variable of presentation P_REGION. The link to the dashboard works well when we choose to value as a single region. She passes the parameter. However, if we choose multiple values, it fails. Do we need to modify the code below in support of more than the presentation variable value to pass to the report.
  
  
  

  <a href="http://nqrc.cci.edu:7001/analytics/saw.dll?PortalGo&path=%2Fusers%2Faron%2FActionLink%2Fname&Action=Navigate&P0=1&P1=eq&P2=%22Employee%22.%22Region%22&P3=@{variables.P_REGION}">Drill Report</a>

  Thank you
  
  Sushil

  Before you go to the link, I would say to understand how the variable takes values.
  Try to use the link as ay of the column expression in the criteria to see the full url with multiple values.

  http://nqrc.cci.edu:7001/analytics/saw.dll?PortalGo&path=%2Fusers%2Faron%2FActionLink%2Fname&Action=Navigate&P0=1&P1=eq&P2=%22Employee%22.%22Region%22&P3=@{variables. P_REGION}

  If my assumption is not wrong valiables holds as "one, two."

  This will give you some ideas to work on.
  If need more help to share the url with multiple values.

  BTW: I don't think that it works with multiple values, give a try, as said.

  So much sense mark :)

• CFC - URi too long during the passage of text string to CFC

  I have a page that allows the user to save a large block of text which is held in a < div > tag to the database without reloading the page through cfajaxproxy and a cfc.
  
  When you click on 'save' a javascript function draws text of the div block and stores it in a javascript string, which is then passed into a cfc using cfajaxproxy as a parameter to the javascript function. (ie. functionName (theTextBlockString);). It works fine except if the text contained in the javascript string var gets too long and causes a URi too long message.
  
  Display of the request in firebug, that I see the cfc is called via a GET request, which causes all my input parameters that I placed in the service to be placed in a GET url string, so of course when it is a long block of text, only the URL query string is too long, and I get the message too long URI of the CFC.
  
  What I'm trying to understand, is how hell I can pass a large text string in the EFA without encountering this problem. Is there an alternative application method so that I can't use GET?
  
  Thank you in advance!
  
  Dave

  I found the setHTTPMethod parameter used during initialization of a cfc to cfajaxproxy - you can change it to a POSITION which obviously solves the problem. Adobe, mark POST by default as AJaxCFC, CFAjax, etc.! Maybe theres some reason to have default GET, who knows...
  

• Apple Photos fails during the download of several Photos or videos

  This question refers to my iMac (27 ", mid-2011) running OS X 10.11 (El Capitan), 2.7 GHz Intel Core i5, 4 GB 1333 MHz DDR3, AMD Radeon HD 6770 M 512 MBand and a 1 TB hard drive.

  I noticed a problem recently, when I'm uploading of photos and videos of our iPhone devices 6.  I do not experience this problem if I download pictures and videos one at a time.  This problem occurs if I try to download several pictures / videos (or all of them) both (that is, him "import all" option), causing the upload process to fail. Photos gives me an error message indicating that the app does not recognize the format of the picture/video and it didn't PTPcamera. After that I see this error message, the "Import" tab in the Photos is gone even after that I have close and restart the application.  I even tried to restart PTPcamera nothing works.

  The problem seems to occur more often with downloading several videos with uploading several photos.

  When this error occurs, the only way I can restart the import process is to restart the iMac, after which the tab 'Import' reappears magically in the Photos and the upload feature working correctly again (for as much as I want it to download a photograph at a time).

  Anyone know what is happening and what I can do to fix this error?  Download photos and videos one at a time is feasible but a real pain in the brain.  I know that the machine is long in the tooth, but because buying a new iMac is in the distant future (unless I win the lottery), I would like to know the root where I have encounter this problem once again the cause of this error.

  Just in case the problem is with the phone, no pictures, try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  Rather than manually import your files, try to use the built-in automatic synchronization functions. In both Photos and iPhone, Flash My Photo Stream. All new files should then be transferred to your computer by Wi - Fi, without your help. Let your phone charging overnight.

• Losing the application window in the passage of several single screen monitors.

  I'm having a problem in windows 7 on my laptop when I spent several monitor to work to a single monitor at home because I was running spread on 2 monitors applications seem to leave orders I had open on the second monitor not visible when I switch to the single monitor at home and reopen the app. Is there a function I need to run to get these missing controls reappear on the single monitor.

  If you move the application to the main screen window before closing, it opens on the main screen next time.

  If the application window is on the wrong monitor, you can move:

  1. place the mouse on the icon of the application in the task bar, so that the preview of the window appears above it.
  2 right click on the preview of the window.
  3. If the word move is dimmed in the menu, click restore , and then right click on the preview again.
  4. click on move .
  5. press and hold down the left arrow key to move the window to the main screen.
  6. press enter .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Windows cannot complete the installation during the passage in audit mode

  Hi all

  I was recently trying build a Windows 7 image for use in a high school lab.
  scenario until now:

  1.) configure WDS
  2.) use DISM to add any drivers necessary for the boot.wim and install.wim file
  3.) copied the files to the WDS server
  4.) installed Windows 7 x 64 enterprise on computer in the lab.
  (5.) to the menu screen post install (where it asks you to enter a user/computer name), I pressed Ctrl + shift + f3 to put the computer in audit mode to start putting in place a default profile.
  6.) after the reboot, I get the following message:
  "Windows could not complete the installation. "To install windows on this computer, restart the installation.

  After reading several posts I changed the SATA mode in the bios in legacy/IDE and tried installing again with the same result.

  I tried to install with a new download windows 7 directly from the DVD without integrated drivers, with the same results.

  I used DBAN to completely erase the hard drive and then tried installing twice with the same result.

  I tried to install it on another computer in the lab and still not received the same message.

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I recommend posting your question in the following TechNet Forum:

  http://technet.microsoft.com/en-us/ms772425.

• AE freeze for a while during the passage of Premiere Pro using dynamic linking

  Hello

  I use Premiere Pro with dynamic links to AE constantly. In this particular computer I had it for 3 months without any problem. A few days ago began almost every time I change first Pro AE (CMD + Tab), a little bit at the beginning and now, a LOT of freezing. It takes several minutes for AE start working again.

  Looking at activity monitor the % CPU for AE when this happens is over 100 and often red (not admissible). Time range from 10 seconds to several minutes. I work with this constantly so I have to be able to move quickly from one to the other.

  Some details of what I am working with:

  OS X Yosemite 10.10.3

  iMac (retina 5K, 27 inches, end of 2014)

  4 GHz Intel Core i7 processor

  32 GB 1600 MHz DDR3 memory

  Graphics AMD Radeon R9 M295X 4096 MB

  First Pro CC 2014.2 Version 8.2.0 Build (65)

  After effects CC 2014.2 Version 13.2.0.49

  I tried to uninstall and re-installation of AE, Premiere Pro and Media Encoder (in desperation) and the recommendations of Adobe support I run repair permission to drive on the boot drive, as well as through all the permissions in disk for all the Adobe folders and subfolders... No use, it keeps freezing like I use it. Memory RAM remains a good 20-25 GB when this happens. I'm running out of options.
  

  
  

  Any ideas what could be the cause and what I could try to fix it?

  
  

  Very appreciated
  

  I found the problem. HAVE nothing to do with the files, but with the huge amount of compositions that are related to the time wherever I have reach about 30 or so it starts to slow down.

  Solution, keep the compositions related to various projects of the AE. Works like magic again. Thanks for the help anyway!

  Enrique

• during the conversion of several Word and Excel docs in a combined PDF file random pages have blue background in the final PDF file.

  I have a user using Acrobat 10. It has been installed two weeks ago and had no problems at the start. Today, she said that when she tried to convert several word and excel docs by selecting and right-click on it to select convert/combine PDF format, pages randomly in the finished PDF file have a blue background. I did some research online and you can't find any information on this problem. Can anyone here shed some light on this subject and maybe point me in the direction of a solution? Any help is appreciated. Thank you!

  Hi Gilad,

  So something I didn't consider was that it could be a setting in office documents. The reason why I do not consider this was cause we tested several docs and had similar results each time. I returned and examined this possibility and found a setting in word that was causing this problem. Although the word doc showed no color page when opened in word, if I went to the "Page Layout"-> 'Color of Page', a shade of blue was chosen. By selecting "no color", then convert / combining documentation in PDF format, we have achieved the desired result. Thanks again for your response!