Persistent variable during the passage through a URL

Similar Questions

• Wheel rotation during the passage of the apps

  Hello

  I frequently meet the spinning wheel during the passage of the apps. For example an app can do one, but open window have not been used for a while and then when I click on the window to use it I get the wheel spinning for a few seconds.

  I am running Yosemite 10.10.5 on a MacPro Mid 2010) with 16 GB of ram and 12 GB available on the 300 GB SSD drive. I just realized that maybe space on the boot drive may be the cause, so I'll empty now and update if there is no change.

  Also, my SSD is a 500 GB Samsung SSD 840 EVO media and I think that the TRIM is not enabled? I read that TRIM was not based with SSDS of third party on my machine and was picking up information contradictory as to the time it was a problem or not. The lack of TRIM could be the cause of the spinning wheel?

  Duane

  You ran a 'cleaning', 'optimize' or 'speed up' apps on your Mac?  Have you installed an antivirus software?

  The 12 GB of free space must be sufficient and not to be the cause of the problem. Don't let him get any small however.

  

• HP LaserJet Enterprise 600 m602 slow printing during the passage of the trays

  Hello world!

  On the HP LaserJet Enterprise 600 m602, who met breaks in print jobs during the passage of the trays?  Example, we are going to print invoices and we have a rule configuration that prints on plate 2 with the exception of the last page that is perforated paper tray 3.  So, in a job of 5 pages, pages 1-4 are the tray 2 paper... then page 5 is perforated tray 3.  There is a 2 to 3 seconds when the last page is extracted from tray 3.  If the invoice is only 2 pages, the print job appears super slow.

  This printer was working fine with no delay until we applied the firmware 2302786_433718.  Now, the delay is very noticeable.  We do not know if it was intentional or not in the new firmware.

  We use the latest PCL 5 Universal Print Driver.  The only thing that has changed is the firmware.  We even tried a full reset of firmware.  Problem is still there.

  I worked with HP support, but we were told to wait... the next version of firmware that may or may not fix everything.

  Any help or insight is appreciated.

  We have this same problem with our printer HP Laserjet 600 M602.

  Could solve by setting the Print Mode to all papertypes that are used for the same parameter.  We thought initially can be a problem, issue or firmware of the Board of adjustment, but in reality was the paper type settings. We set up printer for ordinary paper into tray 2 and tray 3, default regular bond has been set at light mode printing and binding for the print mode binding. Each time dial-up printer and trays, he stops to configure different paper type settings.

  Hopefully the other help solve their printing problems

  Enjoy your day,

• CC in Lightroom on Windows 10 crashes during the passage of the library to develop.

  Everyone has a problem with Frost during the passage of the library to develop modules in Lightroom on Windows 10 CC?

  Hi mgmagney,

  This could be because of the graphics processor.

  Go to the Lightroom preferences > performance > uncheck 'use the graphics processor' > restart Lightroom, and then check out.

  Kind regards

  Claes

• CFC - URi too long during the passage of text string to CFC

  I have a page that allows the user to save a large block of text which is held in a < div > tag to the database without reloading the page through cfajaxproxy and a cfc.
  
  When you click on 'save' a javascript function draws text of the div block and stores it in a javascript string, which is then passed into a cfc using cfajaxproxy as a parameter to the javascript function. (ie. functionName (theTextBlockString);). It works fine except if the text contained in the javascript string var gets too long and causes a URi too long message.
  
  Display of the request in firebug, that I see the cfc is called via a GET request, which causes all my input parameters that I placed in the service to be placed in a GET url string, so of course when it is a long block of text, only the URL query string is too long, and I get the message too long URI of the CFC.
  
  What I'm trying to understand, is how hell I can pass a large text string in the EFA without encountering this problem. Is there an alternative application method so that I can't use GET?
  
  Thank you in advance!
  
  Dave

  I found the setHTTPMethod parameter used during initialization of a cfc to cfajaxproxy - you can change it to a POSITION which obviously solves the problem. Adobe, mark POST by default as AJaxCFC, CFAjax, etc.! Maybe theres some reason to have default GET, who knows...
  

• How we prevent persistent reboots during the day on desktop

  You need to restart our computer of the two or three times during the day.  Turn us your computer in the morning and leavit turn it on during the day, then it turn off during the night.  What is going on???

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• j got the ink in my printer, during the passage of the aa sheet does not print what do I do?

  l ' printer is blocked, I have free has print a feuillr test, but there are no fingerprints, and the sheet through the printer. I managed not to do the walk.

  Look in the upper right of this window.

  

  Where we see English, click on it and select your language from the list.

  

• Larger images Popup during the passage of the mouse on the photos (was: in Dreamweaver CC 2015...)

  I have thumbnails that I would have larger popup on the passage of the mouse. Can't do it in any way. Any help?

  Here is an example usage of CSS3 transform:

  div #socialmedia a {img:hover
  -webkit-transform: scale (1.3);
  Transform:scale (1.3);
  -ms - transform:scale (1.3);
  }

• Void string formula during the passage of several values of variable presentation

  Dear all,

  I have a scenario where I will get one or more presentation variable values, and each value should create a separate chart where each graph should filtered by a single value.

  For example: If suppose that my presentation of the values of variable passing as below.

  IN ("ASTON MARTIN", "KIA", "PEUGEOT", "DACIA")

  Then I should get four chart:

  as the first chart report filtered by ASTON MARTIN

  as the second chart report filtered by KIA

  as the third graphic report filtered by PEUGEOT

  as the fourth graphic report filtered by DACIA.

  Kindly help me out here.

  Thank you

  In your non-text expression expression may be only "Dim MBV CSD". "' @{RF1} {Lk Veh Vehiclemake}.

  Then

  LOCATE(',' || cast("Dim MBV CSD"."@{RF1}{Lk Veh Vehiclemake}"as varchar(1000)) || ',',  ',' || '@{L1}{FIAT,FORD}' || ',') >0
  

  PS

  But in this column (if is not text) you'll never find values 'FIAT', 'FORD' etc.

  Make sure that your model and reports are correct.

• ODI scenario failure during the passage of variables as parameters in the scenarios of the child

  I have defined a script in such a way that the variables in this scenario will pull data from other tables of configuration and pass those values as parameters to another this scenario in the first scenario of parent. I tested in DEV and DEV, test environments that are shared with the same topology with repositories different works. It has worked well. But when I moved the code to the QA environment, then I get the following error message. While attemption to run the scenario with the following command,

  Execution code:

  OdiStartScen '-SCEN_NAME = XXXXX ""-SCEN_VERSION =-1 ""-LOG_LEVEL = 5 ""-PROJECT_NAME. "" "" PASS = # PROJECT NAME. V_PASS""-PROJECT_NAME.» DB_URL = #PROJECT_NAME. V_DB_URL""-PROJECT_NAME.» DB_SCHEMA = #PROJECT_NAME. V_DB_SCHEMA""-PROJECT_NAME.» DB_LINK = # PROJECT NAME. V_DB_LINK""-PROJECT_NAME.» DB_USER = # PROJECT NAME. V_DB_USER ".

  Error message:

  oracle.odi.oditools.OdiToolInvalidParameterException: error when setting the parameters on the tool

  at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:618)

  at com.sunopsis.dwg.function.SnpsFunctionBase.getSunopsisApi(SnpsFunctionBase.java:494)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeOdiCommand(SnpSessTaskSql.java:1431)

  at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:44)

  at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:1)

  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1889)

  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:580)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)

  at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)

  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1066)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: java.lang.Exception: disagreement quote...!

  at com.sunopsis.core.SnpsObject.extractParametersLine(SnpsObject.java:174)

  at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:580)

  ... 18 more

  The variable values for this new environment a probably double-quotes ("") or a special character which is to 'break' the command line. Use this trick ODI to understand all the variables values used in this step and use the values of the test in a procedure separate with just values, not variables:

  http://devepm.com/2014/02/28/execution-variables-trick-for-old-versions-of-ODI/

  It will be useful.

• ROWID question during the passage of the element with f? rating URL p

  Hi all
  
  Recently, I encountered a problem trying to pass the ROWID as a parameter in f? rating p on hidden item URL. No matter if the item is hidden or is just a text field, in apex cut somehow the symbol '+' if it is contained in the rowid.
  Therefore, when I refer to this article, I get the error ORA-01410 ROWID invalid.
  
  the reference is as follows:
  
  f? p = 106:3:2171715767421110:3:P3_SAMPLE_RECORD_ID, P3_BRANCH, P3_CUSTOMER_MAIN_NAME:AAAeGdAAIAAAAFb + VGA, 1, ARNOLD and when it is spent in the symbol-period the rowid displayed in the form 'AAAeGdAAIAAAAFb AAG', without, but with spaces instead.
  
  I don't know how to solve this problem. I would be very grateful if someone could help with this.

  Try thisdoc.41/e21676/apex_util.htm#AEAPI190 http://docs.oracle.com/cd/E23903_01/doc/
  :)

• Overview of e-mail list 9.3 cup during the passage of the mailboxes

  Since the upgrade to El Capitan and the new Mail (9.3) when I switch between the mailboxes, the preview of the list is cut as shown in the screenshot below. If I resize the preview pane displays the full text of the preview of the list, but this is obviously not optimal. I searched around and don't see reference to it as a known bug. Any ideas?

  

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Error 401 during the passage of the assessment of the production environment

  Hello

  We recently moved our application for assessment of the production environment by using the credentials provided by the Push of BB Services, only to find out that we receive an "HTTP 401 - PushServiceId/password status invalid in the authorization HTTP header" whenever we try to send a push notification.

  We do not have change our code (which works very well using assessment data) at all except for his replacement by credentials. We use the URL https://cpxxx.pushapi.na.blackberry.com/mss/PD_pushRequest to send our push notifications, where xxx is the CPID provided by BlackBerry, and we're certainly using the password for the initiator to push (instead of the password for the portal content provider).

  Needless to say that we are base64 encoding app id and the password in the header, and as I said if switch back us to the environment assessment (change credentials), everything works fine.

  This becomes a problem, I would appreciate help if someone was faced with a similar problem.

  That's all. He works with the new credentials.

  Thank you.

• [ADF, JDev12.1.3] Passage of a called taskflow val: "FacesCtrlAttrsBinding cannot be cast java.lang.Long" triggers during the passage (a SetPropertyListener) a bind var. why...?

  Hallo,

  in my page, I have a table based on VO istance.

  I open a workflow in the dialog box when the user clicks a button.

  I spend a whole param through the SetPropertyListener in the button configured this way...

  

  In the called workflow, I read the param in a bean managed through this code...

  Long protocol = (Long) AdfFacesContext.getCurrentInstance().getPageFlowScope().get("protToOpen");
  
  

  And everything works fine.

  The is problematic if I change the From the SetPropertyListener property set with a bind var....

  

  ... I have also display in an inputText.

  (runtime)

  

  (designtime)

  

  The framework throws this exception...

  oracle.adfinternal.view.faces.model.binding.FacesCtrlAttrsBinding cannot be cast in java.lang.Long

  I don't understand why it only works when the From of the SetPropertyListener property is configured with a fixed value, but not when I use the link vars.

  You could you kindly help me find the error?

  
  Thank you

  Federico

  If your value not be #{bindings.prot.inputValue} instead of #{bindings.prot}?

• AE freeze for a while during the passage of Premiere Pro using dynamic linking

  Hello

  I use Premiere Pro with dynamic links to AE constantly. In this particular computer I had it for 3 months without any problem. A few days ago began almost every time I change first Pro AE (CMD + Tab), a little bit at the beginning and now, a LOT of freezing. It takes several minutes for AE start working again.

  Looking at activity monitor the % CPU for AE when this happens is over 100 and often red (not admissible). Time range from 10 seconds to several minutes. I work with this constantly so I have to be able to move quickly from one to the other.

  Some details of what I am working with:

  OS X Yosemite 10.10.3

  iMac (retina 5K, 27 inches, end of 2014)

  4 GHz Intel Core i7 processor

  32 GB 1600 MHz DDR3 memory

  Graphics AMD Radeon R9 M295X 4096 MB

  First Pro CC 2014.2 Version 8.2.0 Build (65)

  After effects CC 2014.2 Version 13.2.0.49

  I tried to uninstall and re-installation of AE, Premiere Pro and Media Encoder (in desperation) and the recommendations of Adobe support I run repair permission to drive on the boot drive, as well as through all the permissions in disk for all the Adobe folders and subfolders... No use, it keeps freezing like I use it. Memory RAM remains a good 20-25 GB when this happens. I'm running out of options.
  

  
  

  Any ideas what could be the cause and what I could try to fix it?

  
  

  Very appreciated
  

  I found the problem. HAVE nothing to do with the files, but with the huge amount of compositions that are related to the time wherever I have reach about 30 or so it starts to slow down.

  Solution, keep the compositions related to various projects of the AE. Works like magic again. Thanks for the help anyway!

  Enrique