During the update 1.3 ISE file transfer problem

We have the problem by running the upgrade command:

iseadm01 / admin # clean up upgraded application

Application upgrade cleaning directory of successful preparation
iseadm01 / admin # application upgrade preparation of ise-upgradebundle - 1.2.x - to-FTP 1.3.0.876.x86_64.tar.gz

Get the package to the local computer.
File transfer error %
iseadm01 / admin #.

The sniffertrace shows that the ISE 1.2 sends TCP RST after about 30 MB of file transfer. If we run them several times order, it stops exactly after the same number of bytes transferred.

The utilazation disc looks OK:

iseadm01 / admin # dir

Disk directory: /.

16384 sep 18-2014 15:55:48 lost + found.

Use of disk: file system
total 172761088 bytes used
14275047424 bytes free
15234142208 bytes available
iseadm01 / admin #.
iseadm01 / admin # dir

Disk directory: /.

16384 sep 18-2014 15:55:48 lost + found.

Use of disk: file system
total 172761088 bytes used
14275047424 bytes free
15234142208 bytes available
iseadm01 / admin #.

We have an other ISE (node monitor) and the problem is the excact same on this node.

Thank you

I've updated two deployments today - one on virtual machines and other devices of series 3400 ISE. Both transferred images OK.

I found it easier to transfer files separately via FTP.  Then, I created a repository pointing on the disk and that referenced in the upgrade command.

I've seen reports of servers ftp transfers on Windows (with WS - FTP or IIS) to 30 MB limits.  I used the ftp server Filezilla on windows laptop and it worked very well.

Tags: Cisco Security

Similar Questions

  • Windows 7 BSOD after accidental shutdown during the update

    Stop computer accidentally during the update of windows. Now computer stuck in a loop of startup blue screen. Safe mode and windows recovery all lead to the blue screen. I don't have a recovery disk. What should I do?

    Hello

    According to the description of the problem, your computer is stuck in blue screen loop. So, I suggest you to create installation media by following the steps described in the article mentioned below and after that try to run automatic reapir.

    Download Windows 7 Disk Images (ISO files)

    After you create the Bootable USB key, change the boot priority and set it to USB. If you are unsure it is advisable to contact manufacturer FRO even. After changing the boot priority is trying to start your computer by using the bootable USB key.

    To run the repair to start the Windows recovery environment (WinRE), follow these steps:

    • Insert the Windows installation disc in the disc drive, and then start the computer.
    • When the message press any key to start from the CD or DVD is displayed, press a key.
    • If your PC does not automatically detect the media
    • When the computer reboots, read on screen for instructions that explain how to interrupt normal startup and access the basic input/output system (BIOS) configuration utility. Most PCs use the F2, F10, ESC or del key to start the configuration of the BIOS.
    • Looking for a tab in the BIOS configuration utility that is labeled boot order, The Options of Bootor Boot. By following the instructions on the screen, use the arrow keys to go to the boot order, and then press ENTER.
    • Locate the flash USB, DVD or CD player (this could be called removable device) in the startup list. By following the instructions on the screen, use the arrow keys to move the drive to the top so that it appears first in the startup list. Press ENTER. The startup command sequence is now changed to boot from the flash drive, CD, DVD, or USB.
    • Press F10 to save your changes and exit the BIOS Setup utility. Select Yes in the confirmation window. The PC will restart.
    • Select a language, a time and a currency, a keyboard or input method, and then click Next.
    • Click on repair your computer.
    • In the System Recovery Options dialog box, select the drive of your Windows installation, and then click Next.
    • In the System Recovery Options dialog box, click on repair your computer.
    • Click the operating system you want to repair, and then click Next.
    • In the System Recovery Options dialog box, click Startup Repair.

    For more information about System Recovery Options, see What are the system recovery options in Windows?

    For more information about the Startup Repair, see Startup Repair: frequently asked questions.

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • Smartphones from blackBerry Torch 9800 completely erased during the update

    When I plugged my phone into the computer to charge, an update came on the bb Desktop Manager - to update to 6.0 Bundle 2467 - and I started the update.  After a few minutes, I realized that I have to back up my phone before the update but Office bb wouldn't let me - he said that HE had to be updated.  If the device software update paused until the Office update was complete.  When it was over, the update of the device continued... and I have no back upward.

    Somewhere in the middle of the update (after about half an hour) the phone blinked, there was funny "beep" and a message came that the update could not continue.  The phone has rebooted, but was stuck at about 65%.   I let it sit for a few minutes, still doesn't move do not.  Pulled the battery, let stand a few minutes like that and then reintegrated.  Began to restart, then won again at the same place.  Taken from the battery after a few more minutes and wait for about 15 minutes.

    When I put the battery back, the phone quickly started completely... but because the updater won Mid-implementation to date ALL is lost! Contacts, calendar, memos.

    Is it possible to recover whatever it is? Or all my data lost somewhere in cyberspace is?

    * There is a small file, about 5 MB called Contacts Blackberry so I thought I could synchronize the files from there, but I don't know how!

    Can anyone help?  Really aggravated in this topic...

    Hello and welcome to the community!

    First of all, we will be sure your BB works correctly and with the proper operating system. Is it? What you have said, I can't say for sure. If it does not work, then you can reload your new OS itself, just to be sure. Don't worry about all the data on your BB... he already went there now (based on what you said).

    For your data, Desktop software must have made a backup during the update process... sometimes, we offer the chance to overcome that... I hope that you do not have. In any case search your computer for files with the extension of the IPD or BBB (depending on the version of the Desktop software you use)... These are the files that would have been created on your computer when the update process performed the backup. Look at the time, the files were created... created around the time you were doing the update are candidates to perform a restore of your BB.

    Otherwise, if you had made use of yourself of the free app of the BB Protect your data are indeed "in the clouds" available for to restore you.

    In addition, if you use a Desktop Organizer (for example, Outlook), which must contain your data.

    In addition, if you have none of these, then you have indeed now met data loss, which is sad indeed.

    Good luck!

  • iPad froze during the update and may not exceed

    Has obtained the new ipad and put in place.  Went do the last software update and it froze during the update process.  Blocked at the white screen with the apple logo.  Can not pass it and past 2 hours.  Tried to restore through itunes, but get the error that I need to enter my password which I can't because I'm stuck on the white screen.

    Hey there smbirchler,

    Congratulations on your new iPad! Looks like you were updating the iOS version, the device froze, and now you can't pass the white Apple logo screen, even after you try to restore in iTunes. I know how happy I am when I get a new camera, so we'll work together on that, so you are able to enjoy your iPad mini.

    We will have you try to use the device in Recovery Mode. Take a look at this article for how to do this:

    If you are unable to update or restore your iPhone, iPad or iPod touch

    Thanks for being a part of the communities of Apple Support!

  • An error occurred during the update the firmware. -16

    I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

    I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

    I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

    I'm not sure what is the problem...

    Your airport is now not working? That is, the reset did not work.

    OR

    It doesn't have to be upgraded after several attempts?

    The airport is connected to the network as usual? You have full internet access through the airport?

    What model is the most convenient airport?

    The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

    What is the current firmware?

    If it is a very old model, they can sometimes give wrong if it has never been updated.

  • Re: Restoration of windows after abrupt during the update

    Hello world

    Last night I was updating my windows on my Toshiba laptop, however, my laptop suddenly shut down during the update process.
    Now, when I start my laptop, I am invited as a system error and I have to put my windows CD to continue. I've never had a CD of windows, and nor have I made a disc of recovery yet, so is it possible possible for me to connect to windows again? I use windows Vista.

    Any suggestions would be grateful.

    Thanks in advance

    You can enter advanced with F8 at startup startup options?
    You can get Vista in safe mode?
    Repair my computer option is available there?

    Try to use this option and you will enter the system recovery options. One of the options it is start repair or system restore.
    Try to fix the system or roll back the OS to an earlier time using System Restore.

  • What can I do about 48 error during the update of the iphone 4S?

    What can I do about 48 error during the update of the iphone 4S?

    Hello! Try the procedure described in section of the Apple Support below:

    Solve the iOS update and restore error in iTunes - Apple Support

  • Equium A60 crashed during the update of the Bios

    Hello, can someone tell me if this can be repaired. IHAVE an A60 Equium that crashed during the update of the BIOS, now he died nothing lights up.
    Thanks in advance

    I presume that the BIOS chip is damaged. In this case, you can do anything to make it work again. Just approved can help.

    The problem is that the repair can be quite expensive. Check it out. If selling Yes the laptop on eBay and... you know what I mean. :(

  • Should I keep plugging my iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my iphone until the full download?

    I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?

    Without doubt, but why not just make the day downloading overnight?

  • Satellite Pro L100 - Crash during the update of the Bios

    Hello

    I am the owner of a Satellite Pro L100 (PSLA4E)

    On the Toshiba site I downloaded the BIOS update. While installing I read that it was necessary to supply cable is plugged. Before I could cancel for the cable, he had started and then frozen. The computer stopped working and so I turned it off! Since then, I've read that it was a very big mistake!

    When put on the fan starts and I can hear etc cd drive spinning. After 15 seconds, the screen is blank, the computer starts beeping!
    Is there a way to solve this?

    Thank you very much
    Rich

    Hi Richard

    Seems not good buddy from your description, that something went wrong during the update procedure and now the ROM module has been flashed properly.

    Maybe you area lucky man and the motherboard isn't too bad, but only the Rom module must be flashed again.

    Unfortunately, this must be done by the technician of the ASP. You will need to contact the ASP in your country for assistance.

    Good luck and have a nice day

  • iMac14, 4 have message "Could not install Windows 10" during the update to build 11099.

    iMac14, 4 have message "Could not install Windows 10" during the update to build 11099 and get the error message "this device is not compatible on Windows 10. Contact the manufacturer for more information. (Network Broadcom 802.11ac adapter) ».

    Picture to describe the problem: http://i.imgur.com/H0SlKd6.jpg

    I think you need to contact Microsoft.

  • Satellite A200-1TD - gel during the update of the BIOS

    I have a laptop model Satellite A200-1TD: PSAE0E, XP operating system

    I tried to update the BIOS and it did not work so he blocked. After that a few minutes, I tried to restart and it didn't worked so I unplugged the AC cable. After that, he did not answer. Black screen, no sign.

    Help, please

    Hello

    I think that, in this case, you can do nothing because the ROM module has to be reflashed and in the worst case the whole mainboard needs to be replaced.

    These freezes during the update of the BIOS can cause such problems as the laptop doesn't start over.

    Moreover, on the Web from Toshiba site you can find an authorized service provider:
    http://EU.computers.Toshiba-Europe.com/ > support & downloads > find an ASP.

    Welcome them

  • An error occurred during the update error checking new Code 80072EFE

    An error occurred during the update error checking new Code 80072EFE

    error 80072EFE infected by a root

    Launch tdsskiller to find any rootkids, download and run from here

    http://support.Kaspersky.com/downloads/utils/TDSSKiller.exe

    your computer will restart automatelly and start up. Then run the updates.

  • 1130us Envy4 crashed during the update of the BIOS

    Hello!

    I just killed my laptop Envy4-1130us favorite.

    I decided to update the BIOS of v.13 to v.25

    During the update process, mogen of BONE (Win8.1) upwards. No error has been shown. After restarting laptop for a few hours, and now it is not working. Supply duct is turned on, the system fan works at full load, but the screen is black, and system does not (OS not start and does not not the power button).

    Community can help me? An it's the BIOS of the laptop recovery console?

    PS: Excuse my English.

    Update:

    When the laptop was completely unloaded, I plugged in the AC adapter.

    It powers on and then the bios recovery procedure has been started.

    So now I have a BIOS v.10

    Thank you HP Bot now my desire to NEVER been updated bios

  • Computer is turned off during the update of game time.

    Windows Update (set to auto) works if your computer is turned off during the update set time?

    I ask this for XP and Win 7.

    Thank you

    N °

    Assuming you want to say in fact 'off' and not 'sleep,""standby","hibernate"by 'off', or another version of not-really-off.

Maybe you are looking for