During the upgrade in ARCHIVELOG mode
Hi allDuring the upgrade of the database 10 g and 11 g... I'll put my mode to archivelog noarchivelog mode database to save disk space.
That this task is improving or speedsup improvement process or any impact.
Suggestions please.
Kind regards
TEJAS
PL identify accurate versions of "10 g" and "11 g", as well as your OS version
During updates of database, for most databases, it is recommended to disable archiving because this will speed up the upgrade process. See the exceptions listed by MOS Doc below. Jose has recommended as the upgrade is a case all or nothing - if the upgrade fails for any reason, you need to restore from a backup and start over. Once the upgrade has completed successfully, in archivelog mode must be switched back on again.
Best practices to minimize downtime during upgrade [ID 455744.1]
HTH
Srini
Tags: Database
Similar Questions
-
Hi all
DB: 11.2.0.3.0
EBS:12.1.3
O / s: Ss73erpintq01 SunOS 5.10 Generic_148888-05 sun4v sparc SUNW, SPARC-Enterprise-T5220
exisitng version java Apps pane:
Java $-version
Java version "1.6.0_51".
Java (TM) SE Runtime Environment (build 1.6.0_51 - b31)
Java hotspot Server VM (build 20, 51 - b02, mixed mode)
ORACLE_HOME--> /t001/test1/apps/tech_st/10.1.2
Le patch 4377566 is already used in the system. After the upgrade to jre 1.7.0.45, when to raise forms, he throws the error: too low Jinitiator 1.1.8.2
Could you get it someone please let me know what is the cause of this problem and the solution I have for the time being back to 1.6.0.51 and able to open forms.
output:
./txkSetPlugin.sh 17045
/T001/Test1/apps/apps_st/appl/FND/12.0.0/binFrom script to upgrade the interoperability...
Send log output to file:
/T001/Test1/inst/apps/test1_hostname/logs/txkSetPlugin.log
Using the context file:
/ T001/test1/inst/Apps/test1_hostname/Appl/admin/test1_hostname. XML
The APPLSYS file using:
/T001/Test1/apps/apps_st/appl/APPStest1_hostname.env
Enter the password for the database user, Oracle [APPS] applications: sysq01appsThe use of /t001/test1/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java to run java programs
Getting values of parameter of J2SE...
Copy oaj2se.exe to html dir...
Copying /t001/test1/apps/apps_st/comn/webapps/oacore/util/jinitiator/j2se17045.exe to t001/test1/apps/apps_st/comn/webapps/oacore/html/oaj2se.exe...
Back up the Application context file...
/ T001/test1/inst/Apps/test1_hostname/Appl/admin/test1_hostname. XML to /t001/test1/inst/apps/test1_hostname/appl/admin/test1_hostname.xml.prej2se17045
APPSWEB file /t001/test1/inst/apps/test1_hostname/ora/10.1.2/forms/server/appsweb.cfg usingSave the appsweb file...
Backup of /t001/test1/inst/apps/test1_hostname/ora/10.1.2/forms/server/appsweb.cfg to /t001/test1/inst/apps/test1_hostname/ora/10.1.2/forms/server/appsweb.cfg.prej2se17045
Updating with new settings of J2SE XML context file...
Update plugin J2SE jdk
J2SE mimetype to 1.7.0_45 update
J2SE Classid to CAFEEFAC-0017-0000-0045-ABCDEFFEDCBA updateThe log file for this session is located in the: /t001/test1/inst/apps/test1_hostname/admin/log/11040625/adconfig.log
AutoConfig is to configure the application environment...
AutoConfig will consider custom templates if it is present.
Location CONFIG_HOME by: / t001/test1/inst/apps/test1_hostname
Classpath: /t001/test1/apps/apps_st/comn/java/lib/appsborg2.zip:/t001/test1/apps/apps_st/comn/java/classesUsing the context file: /t001/test1/inst/apps/test1_hostname/appl/admin/test1_hostname.xml
Value of context management will now update the context file
Updating the file context... COMPLETED
Attempt to download file context and patterns of database... COMPLETED
Set up templates of all the summits of product...
Configuration AD_TOP... COMPLETED
Configuration FND_TOP... COMPLETED
Configuration ICX_TOP... COMPLETED
Configuration MSC_TOP... COMPLETED
Configuration IEO_TOP... COMPLETED
Configuration BIS_TOP... COMPLETED
Configuration AMS_TOP... COMPLETED
Configuration CCT_TOP... COMPLETED
Configuration WSH_TOP... COMPLETED
Configuration CLN_TOP... COMPLETED
Configuration OKE_TOP... COMPLETED
Configuration OKL_TOP... COMPLETED
Configuration OKS_TOP... COMPLETED
Configuration CSF_TOP... COMPLETED
Configuration IGS_TOP... COMPLETED
Configuration IBY_TOP... COMPLETED
Configuration JTF_TOP... COMPLETED
Configuration MWA_TOP... COMPLETED
Configuration CN_TOP... COMPLETED
Configuration CSI_TOP... COMPLETED
Configuration WIP_TOP... COMPLETED
Configuration CSE_TOP... COMPLETED
Configuration EAM_TOP... COMPLETED
Configuration FTE_TOP... COMPLETED
Configuration ONT_TOP... COMPLETED
Configuration AR_TOP... COMPLETED
Configuration AHL_TOP... COMPLETED
Configuration OZF_TOP... COMPLETED
Configuration IES_TOP... COMPLETED
Configuration CSD_TOP... COMPLETED
Configuration IGC_TOP... COMPLETEDAutoConfig completed successfully.
Fact
you have mail in/var/mail / / applmgr
[applmgr:hostname:test1 t001/test1/apps/apps_st/appl/fnd/12.0.0/bin]
$ grep-i COFFEE $CONTEXT_FILE
< sun_clsid oa_var = "s_sun_clsid" > CAFEEFAC-0017-0000-0045-ABCDEFFEDCBA < / sun_clsid >
< jinit_clsid oa_var = "s_jinit_clsid" > CAFEEFAC-0016-0000-0007-ABCDEFFEDCBA < / jinit_clsid >Thanks for your time,
Kind regards
Hi Hussein.
I tried and got the fix for the error - Jinitiator 1.1.8.2 too low during the upgrade to jre 1.7.0.45
Difficulty:
Set the following value in the setting of the jre 1.7.0.45 Panel-> icon of 32 bit java-> java-> view (tab)
-Djava.vendor = "Sun Microsystems Inc."
Later, I was able to access the Forms/applications in a new browser.
Thank you
-
Hello
Rather than rebuild the day before from scratch after an upgrade, I can do this.
We are moving from 11.1.0.7 to 11.2.0.2
The plan is
(a) continue with the log mode archive for preupgrade steps. So waiting is in sync with the primary.
(b) main stop on 11.1.0.7 and trace 11.2.0.2 (boot upgrade)
(c) Mount startup on hold using the 11.2.0.2 oracle home
d continue with the upgrade of RDBMS on primary (in the mode of journal archive)
newspapers of recovery (e) is shipped in standby mode during the upgrade period
(f) primary stop and sleep at the end of the upgrade. Updated compatibility for 11.2.0 on two and do appear primary and start the recovery pending.
I've not done this before. If someone has done this, and would it work? :
Thank you
MSKI suggest you:
0 disable the primary log shipping
1. stop standby
2. install 11.2.0.2 on Standby
3. start standby in recovery mode (don't run DO NOT catpatch.sql to sleep)
4. primary stop
5 install 11.2.0.2 on primary
6. run catpatch.sql on primary
7 re - enable log shipping
8. watch it again apply primary eve - it will also improve the Standby data dictionarySee Oracle support article: how to apply a group of patches, the power supply or the CPU in a configuration of data secondary physical custody [278641.1 ID]
Hemant K Collette
-
Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
Tried running firefox.exe Pei but error message:XML parsing error: the undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line 18, column 1:
"< dialog < =" "^ =" "p =" "> < / dialogue >Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.
Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)
-
What should I stop time machine during the upgrade at El Captian?
Do I have to stop the machine in time during the upgrade to El captain?
N °
Make sure that your Mac meets the requirements > update of OS X El Capitan
-
Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?
You chose the option in iTunes to download the firmware first and install it in a second time after that?
-
Protection of the projects during the upgrade of the Lion in Yosemite
Hello world! Does anyone know how to protect themselves from projects during the upgrade of the Lion to the operating system of Yosemite? I heard shops of the horror of people the upgrade of an operating system to another and then having to rebuild their projects in the new operating system and I want to avoid if I can. If there is no way to do so, any ideas on the record of ongoing projects would be greatly appreciated. I have been turned off of this update forever and you have to do as soon as POSSIBLE. I'm currently under OS X 10.9.5 and FCPX 10.1.4. Thank you!
10.9.5 are Mavericks. Could indicate you these horror stories? They may contain information that is largely obsolete. You want to check any third-party software and plugins to make sure they are compatible with the latest operating system.
-
I have my computer to another, here my specs:
Intel Core 2 DuoHard drive 500 GB2 GB OF RAMDVD playerFloppy DiskThe operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?Hello
1 did you change on your computer before this problem?
2. What is the blue stop screen error message?
3. When you receive a blue screen during the upgrade?
You can follow the suggestions and then check.
Method 1
Disconnect external devices connected to the computer?
Method 2
You can read the article and then check.
Upgrade Windows XP to Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7
See also:
Windows 7 Upgrade and Migration Guide
http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx
-
UNMOUNTABLE_BOOT_VOLUME during the upgrade to Windows 7 from Windows Vista
I'm getting an unmountable_boot_volume during the upgrade to Windows 7 from Windows Vista. It occurs after Windows 7 software loads and restarts. If I restart the computer, I have the option to start the upgrade to Windows 7 or Windows Vista. If I select Windows Vista, the computer restarts without problem. If I choose Windows 7 Upgrade, I get the blue screen of death with the unmountable_boot_volume error. Of course, nothing wrong with the boot volume because Windows Vista starts without error. The boot drive is 1.5 TB. Any suggestions on how to accomplish the upgrade to Windows 7?
Windows Update has nothing to do with the upgrade of Windows. Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Original title: OEM Windows XP Home SP3 update XP Pro
Here is a compilation of the messages from another forum regarding
My problem:
---------------------------------------------------------------I'm trying to upgrade a Windows XP Home Sp3 OEM system to
Windows XP Pro. (There are a few Pro features
that are not available in the House I now need: (1) the files offline and
(2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
I don't want a clean install, but an upgrade. I bought a Windows XP Pro
Upgrade CD on Ebay that was Windows XP Pro
Gold (v2002). I'm sure that's true for the following reasons:It has been listed as an upgrade, but the CD is not labeled "Upgrade".
It seems very authentic with all Microsoft holography.
He came in the standard package of Windows XP (without box),
and it was sealed.
The name of volume for the CD is WXPFPP_EN. The Internet,.
It is the retail of Windows XP Pro RTM (gold)!Here are things I tried initially.
(1) I tried to upgrade to Pro from the purchased CD. It is immediately
has refused to upgrade indicating the upgrade OS (Pro) is older than the
installed OS (home)...(2) I read about "slipstreaming". "Slipstreaming" allows to integrate
a service pack with an earlier version of the operating system. I created a
upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
Autostreamer later, but it made no difference) from the purchased CD
and a file containing SP3.After you burn the CD and start the upgrade
(Windows installation), the upgrade process
product through "information collection."
"Dynamic update" and "Preparation of Installation" with
no problems. My computer restarted and returned to
"Installation preparation". A progress bar called 'Progress '.
quickly filled to about 90% and the hanging system
at that time there for about 15 minutes.
Then, I got the following error message:Setup cannot set the required Windows XP configuration
information. This indicates an internal Setup error.This is where I am stuck. I had to leave the installation at this point.
My drive is starts raining and I had to restore a backup.(3) just for the heck of it, I formatted my hard drive and
reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
I immediately used my XP CD slipstreamed Pro to try one
upgrade to XP Pro and IT WORKED! I need to find out why the
properly clean XP Home OS upgraded to XP Pro but my pre-existing
(with the files users, drivers, etc..) XP Home OS does not level
successfully to XP Pro.
-------------------------------------------------------------Another post:
Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
I continue with installation of all the essential and the add-on
pilots (essentially all my original version). Then, I
set up a network connection and firewall. With this configuration,.
I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
success (even if the upgrade not configured my graphics
card properly). I guess my current problem is either the registry,
the WINDOWS, some user file or parameter file.
---------------------------------------------------------------Another post:
I made a file and the backup of the folder C:\Windows folder
on my system that is pre-existing (OEM XP Home Sp3). I also did a
separate the backup the State of the 'system' on my pre-existing system.
These are added my full image backup of her pre-existing
system a month ago.I did a backup image of my system (minimum fees OEM XP Home
SP3 with all the original installed drivers over a network configured
connection and a firewall configured). This system will upgrade
XP Pro with XP Pro SP3 slipstreamed CD successfully.Experiment 1:
I've restored my minimum system. I then restored the C:/Windows folder
and the State of the pre-existing system backup system. A startup
has managed (with a minor irritant). I had to activate Windows.
Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
at the same place during the upgrade and gave the same error as before:Setup cannot set the required configuration information Windows XP.
This indicates an internal Setup error.Experiment 2:
I've restored my minimum system. I then restored the system state only
the backup of the pre-existing system. After startup I was asked to
activate Windows, but answer Yes to the question would be to disconnect me
the system. I couldn't get connected to try the XP Pro upgrade.Experience 3:
I've restored my minimum system. I then restored only the C:/Windows
the backup of the pre-existing system folder. Once again, as in experiment 1,
the upgrade failed at the same place with the same error message.----------------------------------------------------------------
Before the experiment 3, I hoped that 3 experience would succeed so I
could conclude that I had a registry problem. I'm not sure now.
I don't know what to try next. Take the minimum system and reinstalling
my files of the user is not an option that my hard drive has over 200 GB of
programs! If I restore all files and folders of my pre-existing
I would still have backup to restore a system state the reliable (read the registry).
---------------------------------------------------------------------Sorry for the length! If anyone has any ideas I would appreciate your responses.
Thank you
Hello
This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.
For more information, see this link:
Error message: Setup cannot set the required Windows XP Configuration information
Hope the helps of information.
-
Hello
I use sony vaio VGN-FW290 JTH. I tried to upgrade to Windows 7 and has been invited to uninstall iTunes, Vaio Care, ATI Catalyst Install Manager, ATI Catalyst Control Center, Google Toolbar. I uninstalled it, rebooted the PC and then tried to run Windows 7 installation DVD. Then, I realized that my CD/DVD/BD does not, marked with! in the Device Manager. I tried the procedure in this forum to the http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/957a26d4-4219-4b76-8e89-2e74e6ee2a0e/. I ran SFC tool - it pointed out some problems he couldn't fix it. I tried to update to the latest drivers for the drive, but Windows says that the latest drivers are installed. The properties for the device say: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39):
I hope someone from Microsoft or Sony can help - I think that it is catch 22 during the upgrade to Windows 7.
Concerning
TomgoldHi tomgold,
Welcome to Microsoft Answers Forums.
This can also occur if an incorrect device driver has been installed for the DVD-ROM device.
I suggest that you visit the DVD drive manufacturer site download the latest drivers for the drive and install on the computer and if it works. Make sure you download the Windows vista 64-bit driver.
Device Manager error codes
http://support.Microsoft.com/servicedesks/webcasts/wc091802/devicemgrerrcodes.htm?gssnb=1
If the above, step fails I would suggest that you run the patch available in the link below and check if it works.
http://support.Microsoft.com/GP/cd_dvd_drive_problems
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
7 Windows vista upgrade problem
During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista. No idea what could be the cause of the crash?Hello
I suggest you perform the steps in troubleshooting from the following link and check how it works.
Upgrade stops responding (hangs) at 62% when you upgrade to Windows 7
Check out the following link for more information about how to upgrade Windows Vista to Windows 7
-
I have a laptop Dell Inspiron 1505, that is running Windows XP Media Center Sp3. I'm doing a place in upgrading to Vista since the disks to upgrade Dell... Everything's fine until the 'Expansion of the files' [27%], then the installation fails with this message: "Windows could not update the configuration to start the computer. Installation cannot continue. Any changes made to your computer during the upgrade". I did a google search for a fix that involves changing a value in the registry in the HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E976-E325-11CE-BFC1-08002BE10318} for example change the value to PartMgr Upperfilters. Unfortunately, this value was the default for my registry key changes could be made. Some other fixes involved the renaming of Upperfilter.bak, for Upperfilters unfortunately this .bak value does not exist in my registry.
I tried to boot from the disk of Vista and changing the msconfig for a selective startup but without result.
In addition, the stall even appears at a similar point when you try to upgrade to Windows 7. Is it because of the presence of hidden Media Direct and Dell restore partitions? Compatibility Assistant programs for the two operating systems found nothing significant. Anti virus has been disabled during the installation procedure. Any help will be greatly appreciated. Thank you.
Hello
Not quite, but pretty close. Media Direct could not lock the boot sector. It must be a BIOS lock or a mechanism of protection provided by your antivirus software. Given that, I would check your program settings then for all that prevents changes to the boot sector. You may find more easy just uninstall it and reinstall it after the upgrade. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
Can I turn off my PC during the upgrade to Windows 10?
Original title: Upgrading Wondows
Can I turn off my PC during the upgrade to Windows 10
Can I turn off my PC during the upgrade to Windows 10
Hello.
No.; You can't turn it off while improving to 10.
See you soon.
-
Original title: Windows 10 upgrade options
It will be possible to choose the 32-bit or 64-bit during the upgrade to Windows 10 no matter what version you currently have? I know there are problems with the upgrade a 32-bit version on 64-bit directly, but it is possible to install 64-bit and have a backup installation files in the Windows.old folder.
If you are currently running a 32-bit version of Windows 7 and you want to migrate to 64-bit Windows 10, you will need to download the 64-bit Windows 10. ISO and make a custom installation:
How to: perform a customized Windows installation
A custom installation will produce a Windows.old folder, but as that mentioned, it is none functional. The best thing you can do is to create an image of the system in advance if you need to go back to Windows 7:
http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/
See also:
What are the official update paths to Windows 10?
Microsoft has revealed in a video of 9 Channel official upgrade paths to Windows 10:
Users of Windows XP and Windows Vista will have to do a clean installation of a. ISO, so Windows 8.0 users.
Source: http://channel9.msdn.com/Events/WinHEC/2015/OWD100
If you try to upgrade to Windows 7 by using Windows Update, it will keep the same architecture.
How knowledge publishing Architecture, canal and the construction of 10 Windows installed.
Maybe you are looking for
-
iOS 10 - now I touch Touch ID, * and * press the Home button to open iPhone?
I have an iPhone 6, and today I have updated to iOS 9.3.5, to 10.0.1. One thing I noticed that really bothers me, it's unlocking the device. With iOS 9, I had to touch the Touch ID to unlock. Now I touch the ID to touch and sometimes it unlocks, a
-
I backed up my old mac and then transferred the data on my new mac. I agree delete playlists iTunes on my old mac for free storage? I don't want to lose the songs on my new mac.
-
I use the email client Gmail, your browser (Firefox) is very good but has problems when Gmail accessories, mark an error and I should try again once (I do it without success). Should definitely fix this. Thank you.
-
connect my lack of headset blue tooth, shows ofline but not pared, no signal
my Bluetooth headset want to play he matched it still shows no signal, blue tooth mouse works
-
Windows 7 hangs for an hour up selecting a user in addition to comments
I have a Dell N3050 which my last HD out crapped on new drive installed. After installing windows 7 with SP1 on a new hard drive of 1 t, I was able to connect to my users normally. But after I connected to the internet and installed the windows updat