DV6 6117dx card mother swap with dv6 3025dx
My hp dv6 6117dx has been damaged by a power surge, the other day. It works and everything but it won't turn a few moments notibly if I leave the laptop for a few hours, it puts without problem and then repates the cycle if I turn it off. The power button is very good and everything is fine.
My question is can I replace my above advice to the Commission on the laptop? What are the chances of work, I got a deal on the replacement for 50 card
Even if the new Board of Directors adapt physically into the laptop, the line ports with holes, cables to connect where they are supposed to, etc. you will probably get your laptop computer funcionting properly issues. More that likely, something not line up correctly. I have replace motherboards all the time in many different models, but I have not personally tried what you're suggesting. I never fell on motherboards for two different, although similar models, where everything lined up the way it was supposed to. If you get in, it is very likely that other devices, you need to connect to the motherboard is not compatible with the older Board and/or drivers are not available for your devices work correctly. They have been designed to operate on the dv6-6000 and not the old pension dv6-3000.
You can always try it if you think that the savings justify. But there are planks of dv6-6000 for as little as $75 if you have any questions you are ordering from China. My personal opinion is that it would be easier in the long run to find the right advice for your laptop...
Tags: Notebooks
Similar Questions
-
Compatibility card mother Benicia with connector power button on the new case
IM wanting to upgrade my computer case but he should know if the power button connector will work with the motherboard of benicia.
Thank you
Richard
Depending on the configuration of the connector of power button, HDD connectors and light power connector on the new case, you may need the connectors changes.
-
How to upgrade card mother & processor with existing oem window xp sp3
Relatives,
My Pc configuration is 1.80 GHZ Intel Core 2 duo CPU with motherboard DG965RY [Intel] with window XP OEM sp3 OS as my motherboard & processor having a problem so I want to update with the new processor & motherboard & I want to use the same operating system, so how, thighs, what I need to doEstelle,
India
Hello
I suggest you to contact the manufacturer of the computer for help on this issue.
Reference: http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers
-
I get a Toshiba satellite 1900-102 with a default card mother work
Does anyone have a default Toshiba satellite 1900-102 with a card mother work and is willing to sell?
Or does anyone know where to find that?
Hi Erdl,
I think this is the wrong forum to ask questions about buying used and portable defects! I understand toshiba as well as this forum is only for technical user to help!
In my opinion, you will have more luck at ebay or used equipment selling home pages!
Sorry
Campino -
Pavilion A4316F Desktop with M2N78-(Violet6) card mother CPU Upgrade
I looked at the HP Site before making the CPU to upgrade to purchase (http://support.hp.com/us-en/document/c01925562) my office. I bought an AMD Phenom II x 4 processor clocked at 3.4 Ghz. When I installed the CPU and try to start, I have a unknown, computer processor stop error. From what I can tell on the HP site, this processor should work with this motherboard. Any suggestions?
Please provide the role other than whole or number of the plateau of the AMD processor for our review. Only 3.4 Ghz AMD Phenom II x 4 processors I know are the 125 watts Note: AMD Phenom II x 4 965 Black Edition and the140 watts Note: AMD Phenom II x 4 965 Black Edition. None of these processors are compatible with the Violet6 motherboard in your system. The card mother Violet6 is intended to be used with processors up to 95 watts. In addition, "Black Edition" CPUs have discovered clock multipliers to be used in overclocking, but does not support the Violet6 overclocking motherboard.
Please consider these 95 watt AMD AM3 processors except CPU 'Phenom II X 6' and processors ' B #
-
Card mother H-IG41uATX HP works @ 1066 Mhz with single 2GB 1333 Mhz RAM
Hello
My card mother H-IG41uATX HP works @ 1066 Mhz with single 2GB 1333 Mhz RAM (Apacer PC-10600) @ 7-7-7-20.
BIOS is Version 6.08, 07/07/2011.
BIOS it detected as PC-8500. CPUZ shows like PC-10700 work clocked at 533 Mhz (= 1066 MHz DDR).
The processor is Intel Pentium Core 2 Duo E 8400 3.06 GHz with FSB 1333 MHz.
WIndows 7 operating system
1. Why does is not able 1333 Mhz motherboard @ full speed?
2 working memory @ 1066 MHz @ 7-7-7-20 VS memory work @ 1333 MHz @ 9-9-9-24, which is better?
Khelifi
Sure... While theoretically fastest speed of memory should be faster, there is little or no difference in the overall performance of the memory. The memory CASE latency generally increases the rated speed increases. Latency means basically 'backwardness' and this latency to counterbalance the gain by increasing the speed. Still, you would never notice a difference between the two.
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
-
I have a HP Envy 23 d027c All In One with the card mother Lavaca3-SB (pegatron) IPISB-NK. It has a PCI slot available for upgrade of the video. I want to do this. I intend to use the pc for video processing and maybe a few games.
How to pass the video?
What cards are best for this system?
What has changed in the BIOS or other settings I should do? How can I get them?
Thank you
Art
The PCIe MXM slot is for HP install graphics cards in some models CTO (configure-to-order). Without the card installed when you purchased the computer, there the fan and radiator bad sets. You will need to buy a graphics card and the heatsink / fan of HP to try to upgrade the GPU in your computer. There is an extensive disassembly involved in this procedure. All-in-One computers have much more in common with laptops than they do with traditional desktop computers.
Honestly, if you want to do video processing and games... you should get a traditional desktop with enough CPU and GPU for these activities.
Please click the White Star of KUDOS to show your appreciation
-
can I change my keyboard on a dv6-3025dx to a backlit keyboard?
I have a computer laptop dv6-3025dx, and the keyboard is not backlit now. I would like to install a backlit keyboard, but I don't know if I can do that, someone has answers to my problem?
Try ebay or run on google shopping, but ebay is especially the cheaper.
-
Windows xp professional compatibility with card mother i5 to intel
Hello
I want to upgrade my pc to the card mother i5 intel. Windows xp professional compatible?Yes, but in order to be check secure web site of technical support from the manufacturer of the motherboard for Windows XP device drivers. If the drivers are available for download, then you know for sure that XP is compatible.
If you have the original version of XP or a CD with a Service Pack (1 or 2) earlty, it allows to upgrade the CD with Service Pack 3 "slipstreaming".
How to create a Windows XP SP3 slipstreamed CD
http://www.PAGESTART.com/slipstreamsp3.htmlJ W Stuart: http://www.pagestart.com
-
card mother Dell can change my existing parent outside with one of the same brand and model?
I have a dell inspiron 530, the motherboard is bad. I was going to get the same model. but I was told that windows will not work on the new. even if they are the same type of motherboard
Make the point by replacing with the same card mother and model is interpreted as reinstallation on the same computer.
Change the motherboard starts the process of building a new computer and an OEM of Windows version is only intended to be installed on a computer not two or more. You can purchase licenses for installing Windows on multiple computers, but they aren't meant to business computers home computers.
-
Help with the new card mother and Vista problem?
So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE
b: use linux
work of the restore cd to reinstall the OS, so I can use my new motherboard?
So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE
b: use linux
work of the restore cd to reinstall the OS, so I can use my new motherboard?
Hey icuhavoc
are recovery disks to reinstall vista with the original hardware installed if I understand you correctly know what records you need to know a set of manufacturer's recovery disks
If it is pre-installed this is an oem license and does not change unless you did it in consultation with the manufacturer of models of motherboards and processors
Walter, the time zone traveller
-
What card mother motherboard inside the Pavilion hpe h8xt with Ivy bridge
You want to buy, but can't find any information on what motherboard that uses. Would love to see a pattern!
@ Big_Dave
Here is the card I found for the card mother HP OEM Pegatron IPMMB - FM (Formosa). The specifications indicate the decision-making is an Intel LGA 1155 (Socket-H2) and processors supported are;
Intel Core i3-3xxxT (Ivy Bridge) Dual Core 256 Intel Core i3-3xxx (Ivy Bridge) Dual Core 456 Intel Core i5-3xxxT (Ivy Bridge) Dual Core 256 Intel Core i5-3xxxT (Ivy Bridge) Quad Core 152 Intel Core i5-3xxxS (Ivy Bridge) Quad Core 756 Intel Core i5-3xxx (Ivy Bridge) Quad Core 676 Intel Core i7-3xxx (Ivy Bridge) Quad Core 676 Intel Core i7-3xxxK (Ivy Bridge) Quad Core 676 Intel Core i3-2xxx (Sandy Bridge) Dual Core 756 Intel Core i3-2xxxT (Sandy Bridge) Dual Core 256 Intel Core i5-2xxx (Sandy Bridge) Quad Core 95W Intel Core i7-2xxx (Sandy Bridge) Quad Core 95W Dual-core Intel Pentium G6xx (Sandy Bridge) 756 Dual-core Intel Pentium G6xxT (Sandy Bridge) 256 Dual-core Intel Pentium G8xx (Sandy Bridge) 756 and supported memory;
Dual channel memory architecture
Four DIMM DDR3 240-pin connectorsSupports DIMM DDR3 modules
PC3-10600 (1333 MHz)
PC3-12800 (1600 MHz)
Memory non - ECC, unbuffered
Supports 1 GB, 2 GB and 4 GB DIMM
Supports up to 4 GB on 32-bit systems
Supports up to 16 GB on 64 - bit systems
Frank
-
VLT0204 card mother PS2 PG failure of voltage is outside the range. Contact technical support
Hi all
I currently have two servers Dell Power Edge R720. Both servers have redundant 1100W AC power supplies. Two weeks ago, as a blackout caused a power of each server malfunctions which have been replaced under warranty of new power supplies.
Since then taking PS2 both servers reported an error, VLT0204 motherboard PS2 PG failure of voltage is outside the range. Contact the technical support.
In order to solve the problem, I turned off the system and disconnected the power cables and pressed the power button. Then I swapped the power supplies reconnected power cables and power on the system. I repeated this step for the second server. Now, the two systems not reported the error VLT0204.
However, the ' card mother VLT0204 PS2 PG failure of voltage is outside the range. Contact support. "error message on the front panel again. Repeat the steps above have not solved the problem. I realized that this time the error VLT0204 became persistent.
Just to be sure that the error is persistent, I deleted material newspapers, after which, I still see a critical error in the integrity of the server--> tensions section iDRAC.
I used the DSET to generate the server logs report that also shows the VLT0204 error message. I can provide if necessary whole zip file.
Should I ignore this error message, or should I send it to Dell for warranty inspection.
Thank you very much
Sohaib
MSI - PK,
If feeding #2 is deleted in all, always you get the error even when it is removed?
Also, I'd take the server to the minimum hardware requirements, which removes all installed, but the following:
- A power source
- Control Panel (for the power button functionality)
- A processor (CPU) in socket CPU1 (minimum for troubleshooting)
- A memory Module (DIMM) installed in the stand A1
- Mounting 2 and 3 for uniprocessor or Riser 1, 2 and 3 for two-way configuration configuration
It lights up with this configuration, you can also share the power supply 1 with 2 to test both power supplies under this configuration and see if the error is still present. If so, then probably the motherboards voltage regulator was damaged during the blackout you indicated.
If you clear the error, try to add the removed parts back to the server individually until the return of the error indicates which device is causing the problem.
Let me know what you see.
-
Drivers Windows 7 x 64 for the card mother Memphis-M
Hello! I bought the HP Pavilion 500-164er with Linux operating system desktop PC.
Still, I installed Windows 7 x 64 on this unit, but I couldn't find some drivers for the card mother Memphis-M.
I need:
Simple communication controller PCI Chipset, USB 3.0.
Thank you and waiting for a response.
Hello:
You can use the W7 x 64 drivers and software of this model that has the same motherboard as yours.
DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES
Chip set:
Comms Simple PCI:
USB 3:
-
Replacement card mother Qosmio G10
After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:
1. second HARD drive internal no more seen.
2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
3. always on cooling fan.Upgrade the motherboard consisted of:
1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
2. loading the CD-ROM TCN0000006 official update tool.
3. no recovery BIOS or EC/KBC.Any idea?
I m wondering how you did update the information in the DMI?
As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
So maybe his bad card mother
Maybe you are looking for
-
ITunes and magic problem keys multimedia keyboard
Hi, I have all new iMac 27 "5 k retina and multimedia keys on my magical keyboard do not work (play, pause, etc...) ... Volume controls work properly. I have chrome and google didn't play the expansion of music. What is the problem? Thank you
-
2 sites in particular when I go to old-time TV stream, my movie site is ok, youtube is ok, all plugins are up-to-date, I reset firefox, restarted and all it all that regular but still these 2 sites will not broadcast my video
-
Scan of the file: path/data not in the format specified in double
Can you get it someone please let me know why it does not work? It's just a piece of sample code, to write data in a txt file and then read it. First, if a file already exists when I want to write in it and I chose 'Replace the file', he says stop an
-
I ran Windows repair , but the problem persists. some high priority updates do not install automactically or manually in detail below. Update for Windows XP (KB2761226) security Error Code: 0x8007F0DA Security Update for Microsoft .NET Framework 1.0
-
Windows security update blocked me to use my internet, how can I do to solve this?
I know it's the security updates, because when I restore to a point before the updates, the computer works fine until it updates settled again. Ive ran the diagnostic thingy and it says that Im on the internet and MSN messenger returns its position b