Compatibility card mother Benicia with connector power button on the new case

Similar Questions

• Symbol of the three discs stacked to the left of the power button on the front of the CPU

  Pavilion p7_1070t CTO desktop PC

  What is the symbol on the left of the power button on the odf before the CPU?  It looks like three stacked discs and a light under the symbol flashes?

  Hello

  It's just a visual indication of when your drive is reading or writing data - so if it flashes quickly this would indicate a lot of hard drive activity, less when the LED flashes slowly.

  Kind regards

  DP - K

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• DV6 6117dx card mother swap with dv6 3025dx

  My hp dv6 6117dx has been damaged by a power surge, the other day. It works and everything but it won't turn a few moments notibly if I leave the laptop for a few hours, it puts without problem and then repates the cycle if I turn it off. The power button is very good and everything is fine.

  My question is can I replace my above advice to the Commission on the laptop? What are the chances of work, I got a deal on the replacement for 50 card

  Even if the new Board of Directors adapt physically into the laptop, the line ports with holes, cables to connect where they are supposed to, etc. you will probably get your laptop computer funcionting properly issues. More that likely, something not line up correctly. I have replace motherboards all the time in many different models, but I have not personally tried what you're suggesting. I never fell on motherboards for two different, although similar models, where everything lined up the way it was supposed to.  If you get in, it is very likely that other devices, you need to connect to the motherboard is not compatible with the older Board and/or drivers are not available for your devices work correctly. They have been designed to operate on the dv6-6000 and not the old pension dv6-3000.

  You can always try it if you think that the savings justify. But there are planks of dv6-6000 for as little as $75 if you have any questions you are ordering from China. My personal opinion is that it would be easier in the long run to find the right advice for your laptop...

• Compatibility card mother HP/Phenom 960 t

  I have a HP P7 1054, Alvorix H-RS880-card mother Μatx, rated at 95W max (oops on the purchase of a Phenom 965BE).  The motherboard is compatible "9xx" and Phenom 4 x 3.0 ghz 960 t is assessed to 95W.  Will this motherboard support unblock this CPU to present itself as a 6-core, it is strong?  I heard some motherboards do, some don't.  Moreover, the fact that this CPU is 3.4 ghz "turbo" (T) affect compatibility it is, as it technically isn't just a 9xx, this is a 9xxT.  I am currently very literal, it should work if I buy it. Add cache L3 of the Phenom my Anthlon 3.1 stock vs ghz 4 x 645 is primary, without renouncing a clock speed.  Looks like a good 95W replacing the 965BE, also 3.4 ghz but 125W

  I decided to just give up the illegitimate child of 970T and get a Phenom X 6 1045T, I know works, 95W, has 6 hearts, of course, has the L3 I want, 50% L2 more than my 4 X and will run at 3.2 Ghz Turbo when 3 or more cores is closed. For $99 at my local Microcenter, it's worth on my Athlon X 4 645 3.1 Ghz.  Without risk, HP even built desktop computers with this CPU on my exact Board.  The computer is much faster than me in any case using Solidworks.  Now if I can just sell my 125W Phenom X 4 965BE with zero minute on it...

  Thanks for me direction away from what would have been a dead end...

• Tungsten e2 how hard reset with broken power button

  I am getting rid of an old Tungsten e2 and need to reset to factory settings. However, the power button is broken and I can't find another way to do a hard reset without using the power button. Is there another way? Thank you

  Welcome to the HP support community!

  Someone wrote a program years ago this very dilemma!

  Go to the following page and download and run the program named "Hard Reset".

  http://palmpowerups.com/downloads.php?cat_id=2

  WyreNut

• Satellite P35 - compatibility card mother/cpu?

  Hello

  I have a toshiba laptop p35 with a motherboard K000018150.
  The vehicle currently has a 4 538 mobile pentium 3.2 GHz and I want to know if it is compatible with a processor intel core 2 duo 1.6.

  I can't find any support for this model.

  Thank you

  Post edited by: jack35

  I agree with Pererk

  You check you chipset which is placed on the motherboard.
  It is very easy to read using a material like Everest Home Edition diagnostic tool.

  Chipset properties can be verified on the Intel page
  You will find the news which processors are supported by this chipset

  But note; Although the chipset would support a new processor, it is not easy to tell if the laptop would be stable after this upgrade due to the question of compatibility of the BIOS.

• How to upgrade card mother & processor with existing oem window xp sp3

  Relatives,
  My Pc configuration is 1.80 GHZ Intel Core 2 duo CPU with motherboard DG965RY [Intel] with window XP OEM sp3 OS as my motherboard & processor having a problem so I want to update with the new processor & motherboard & I want to use the same operating system, so how, thighs, what I need to do

  Estelle,

  India

  Hello

  I suggest you to contact the manufacturer of the computer for help on this issue.

  Reference: http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers

• How to change the configuration of the BIOS with NO SIGNAL - to accept the new card PCI - ex

  Compaq Presario SR2030NX

  Product #RJ036AA

  S/N {removed privacy}

  MB: ASUS A8M2N - LA

  Bought: October 2006

  OS: Windows XP Media Center 05

  New graphics card: MSI N210-D512D2 graphics card GeForce 210-512 MB, DDR2, PCI-Express 2.0 (x 16), 1 x DVI, 1 x VGA, DirectX 10.1, mono-emplacement

  New: 480w PSU

  ERROR:  NO SIGNAL on monitor and can not reset the BIOS to accept the new video card in the PCI slot

  PROBLEM: The user reports the monitor suddenly became white with blue lines finally erased.   On start-up, the screen shows "No Signal" then turns off.

  Troubleshooting has included:

  Fixing monitor with its cable to another PC - monitor work

  Fixing working monitor and cable to the PC - No Signal

  There is no boot beeps, fans, lamps, not work cable defeated, no video.   I concluded the embedded video component failed.

  Installed the new video PCI - ex card and new power supply 480w and still get NO SIGNAL.   New video card specifications called for a minimum 350w power supply.  The fan on the new video card PCI - ex works.  Search on the HP Support pages indicates that the BIOS should be modified to change the type of PCI slot type in-flight video.  Makes perfect sense to me, sounds like it might work.

  How to reset the BIOS when you do not see what you are doing?

  I have moved the jumpers to reset the CMOS, but cannot tell if it worked or not.  I tried a couple blind BIOS resets, but I could do this for months.

  If I could determine the Version of the BIOS, I might be able to blindly to reset the BIOS.  The Compaq Options of Menu and "BIOS Setup Utility information" web page provides instructions for BIOS version 6 or less and version 7 and greater - menus and access steps are very different.

  QUESTIONS:   How to determine the version of the BIOS.  Which key I hit to access the BIOS (F1, F10, esc, Del)?  Which menu I followed to reset the type of video, so how can I save and exit?

  

  Thanks for any help

  GJB

  Thank you Paul,.

  I didn't know that it was just a function of Regedit - piece of cake.

• Power button in the start Windows 8.1 screen

  When I go to the Windows Start Menu 8.1 I have all of the options of closing down, sleep etc.  I have a laptop, I expected this option to be there.  Can someone explain how to recover?

  Things I've tried:

  I searched all the parameters that I can find, but if you know where it is I would be very grateful to hear it!

  I used a change in the registry tutorial that was supposed to solve the problem found here - http://winsupersite.com/windows-8/windows-81-update-1-tip-toggle-power-button

  Hey D_E_Manton,

  I don't think that this feature is something that has been disabled by HP.

  You have the latest updates for your system? Windows 8.1 does not initially include the functions of power on the start screen. These were added later with an update and is the most likely solution to your problem.

  In addition, as a temporary work around you could do what I did in Windows 8 for my PC at home. Create a shortcut in "c:\ProgramData\Microsoft\Windows\Start Menu" to sleep, stop, or restart. As long as you create shortcuts in the correct path to the file, they should be viewable on your screen, allowing you to pin them there. You can change the icons of shortcuts to display the corresponding images using this path of the file as you choose the icons: %SystemRoot%\system32\SHELL32.dll

  When to use the shortcut created the following location:

  Shutdown - shutdown.exe/s/t 00

  Restart - shutdown.exe/r/t 00

  Sleep - shutdown.exe/h

  I hope this helps!

• Pressing the power button opens the marshmallow camera app

  So 2 days ago, I was finally able to update to the marshmallow Lollipop :-)
  -J' found that endurance mode is disapparead and I have heard that it is replaced by: "Optimization of the battery" or snoozing?

  I really miss stamina mode, is there something similar I can use inside the android Marshmallow?

  I tried something inside the setting "block yoptimization", but it isn't really the same as endurance.

  Furthermore, I have a new problem that has ever taken place on lolipop and this is when I press the "lock screen" button sometimes the phone vibrates and opens the camera application?

  But it is not allways but sometimes.

  -Do you have someone with experience who?

  The app of endurance, I don't think that there is a need for additional explanations that you can search the forum:

  https://talk.sonymobile.com/T5/software-updates/how-to-configure-the-doze-mode-and-waits-in-marshmal...

  On the second question, you have enabled settings - display option to start the camera on a key double power.

• h [p 3745 printer does not print. New laptop HP Pavilion. Windows 8. Power button on the printer flashes.

  I have a new laptop. HP Pavilion g6. I have HP deskjet 3745. USB cable the printer plugged into the laptop. Outside the printer power button flashes.

  Try a hard reset. Unplug the power cord at the back of the printer and the wall, wait 30 seconds then plugg back.

  Make sure that the printer is connected to the wall also.

  If it does not work. Turn the printer off, unplug the printer power cord to the back of the printer, and then remove the cartridges. Reconnect the power cord wait 30 sec then insert the cartridges.

• Distorted icons and buttons especially the new tab button

  Certain keys, such as the new tab button are distorted. It was the series of changes after what I noticed this (initially I was using firefox 41 on system from 21 to 64-bit fedora with XFCE desktop environment):

  -Upgrade fedora at 22

  -Installed LXDE desktop (with XFCE)

  -Theme installed atolm (http://gnome-look.org/content/show.php/Atolm?content=136789). Just extract the contents of the archive in ~/.themes

  -past to this theme

  -used the rodent icon theme (XFCE)

  Up to this point, that I had not opened firefox and so I do not know when this problem occurred. I decided to remove LXDE and switch back to XFCE. I thought that this distortion of the icons happened probably because of an incompatible Openbox desktop configuration. This problem persists in the XFCE desktop environment too. I tried changing themes to see if a bug with the theme is causing these things, but remained it. I reinstalled firefox but the problem still persists. There is no option in the Customize menu to solve this problem. In addition, firefox menus do not use the gtk theme.

  I have updated my firefox in another system and installed fedora-21 the same theme gtk and this one is very good. The menus are in accordance with the gtk-theme and the icons are not distorted.

  @cor-el

  I tried with the theme by default too. Did not work. I changed the icon theme and rebooted. The distorted icons disappeared!

  This seems to be a problem with the rodent icon theme.

• Why can't we "View cookies" menu have a button in the new drop on FF29?

  I see that the new Firefox 29 has a dropdown menu in the upper right, with the different symbols of shortcut. One of them is 'preferences', but I would like to do that to be have an even shorter shortcut for "show cookies", instead of having it buried in a few clicks as in older versions of FF.

  1. Cookie Manager button install and restart Firefox, if prompted.
     • https://addons.Mozilla.org/firefox/addon/Cookie-Manager-button/
  2. Make a right click (or Ctrl + click) a box empty tab bar and choose Customize.
  3. Drag the Cookies button from the palette on the Panel of the menu on the right.

• Registered credit card payment problem - limited number of transactions on the new.

  I have delay in payment for my program because of the default limits of the new credit card. I'm in the photographers CC program. Credit card has been set at zero operations per month then on due time.  What to do now?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html