Dv7-7240us envy: 10 Windows and Wireless Watch limited

Similar Questions

• Dv7-7240us envy: upgrade to windows 10

  I would like to know what that need updated on my laptop with Windows 8.1 before moving on to Windows 10 latest drivers.

  I have the latest drivers Intel HD 4000.

  I was not able to install HP Support Assistant for the past year (error message)

  @BrianH15,

  Hello and thanks for the display on the HP support forums.  The only compatible drivers for your system will be located on the HP support page.

  ENVY of HP dv7-7240us Notebook PC drivers.

  You will find there only drivers in charge.  Drivers for windows 8.1 are not included for this system and they are the ones that are used for windows 10.  Try the upgrade but I would stick to the original operating system until the and only if drivers are available for 8.1.

  I hope this helps.

  Thanks again for posting and have a great day.

• System performance 'Windows' and wireless mouse problems

  I have a HP Pavilion dv7-3 with a mouse Microsoft Wireless Mouse attached model 4000.  So far it has been working well.  Now the top scroll button on the right will not work.  Down works great.  This takes place when I'm on the internet.   Brand x close tabs does not work.  The system seems to start ok but it is slow when loading startup programs.

  I have a HP Pavilion dv7-3 with a mouse Microsoft Wireless Mouse attached model 4000.  So far it has been working well.  Now the top scroll button on the right will not work.  Down works great.  This takes place when I'm on the internet.   Brand x close tabs does not work.  The system seems to start ok but it is slow when loading startup programs.

  Then. "so far"--> indicates the latter.  When he last work properly?  You can use a system restore point to return when he worked last to see if it's related software?

• Printe all-in - One HP ENVY 7640: Wired AND wireless?

  Question: If I buy the above printer, can I print using my Wired

  I bought an OiiceJet 6500 has some time ago. I was VERY disappointed. It does not Duples, I get EITHER Witred or wireless (not both). Of ink refills are EXPENSIVE and they only last for a few weeks. After a few months it stopped paper feed and no matter what we tried sound from a white elephant.

  I won't be suckered into another very poor printer with the consumables very expensive printer that only half of us can use

  Hello

  This printer supports RJ 45 cable and wireless however both can not be active at the same time.

  The best configuration that can be used there to connect the printer to the router by Ethernet cable / wireless (depending on your choice).

  Connect the iPhone, ipad in the same wireless router.

  Use of the HP all-in - One Printer Remote app to print.

  Link to the app in Itunes in HERE

  Although I am an employee of HP, I speak for myself and not for HP.

  Click on the thumb BRAVO upwards on the left to say 'thank you '.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• The trackpad is completely screwed on dv7 HP Envy. w / Windows 8/8.1

  Until recently, my laptop has worked almost problem-free until I started hearing some weird beep sound from the speaker. I don't know if it's relevant to the problem, but it might have something to do with it. I noticed the next day morning, the trackpad would not work correctly while being logged on to Windows. I have to hold the left click just to get the cursor to move. In addition, gestures and the part of the trackpad that lets you disable the entry work at all! The only time that the trackpad will essentially work correctly is in just about any environment before loading the Windows account.

  Resolution of the problems so far:
  -remove the device driver = basic function but a poor performance.
  -deleted and reinstalled the driver for the trackpad on the site = same problem once more.

  SOLVED! I don't know how to mark the topic as resolved, but all that was needed to solve the problem was a hard restart (remove all devices and power sources and hold the power button for about 30 seconds).

• HP DV7 7240us Envy

  Does anyone know if you can install Windows 7 on this computer Windows 8.  So far I have not had success.  Any help will be much appreciated.

  Hello mechanic1244,

  It is not recommended.  Here's an article about it.

  I hope this helps.

• Deskjet 6988 printer to wireless network (laptop Envy w / Windows 8.1)

  I got my printer HP Deskjet 6988 years and still it was connected to my desktop via a USB 2.0 cable. I bought a laptop HP Envy with Windows 8.1 and want to connect the printer through my servant/Belkin router network, as the USB 2.0 cable provided with the printer does not seem to work in the USB ports of the desire for direct printing. The software disk did not work in the laptop, so I downloaded the software and utility software (printing and scanning) to 8.1 on the HP site.

  I ran the download, the installation wizard has started, said "the wizard will connect to the internet and help install the best software available for your printer." I clicked on next, and opens a window "Device discovery" and then an another "recovering the device" then... nothing.  The wizard window closes. My installation manual is useless. It tells me to use the wizard on the software disk that does not work on my laptop (and is obsolete and for the operating system still wrong, because it was for my office, which took place on VIsta.)

  I somehow managed to get the printer installed on the laptop - I can see it under the available printers.  And if I have an ethernet cable connected directly from the printer to my router, it will print. But if I unplug the ethernet cable, it will not print. I can't keep the ethernet cable is connected for printing, because the router is in my living room, behind the TV and my office is on the floor. I prefer not to keep my printer on the floor of the living room by our TV, so I really need to work wireless!

  My problem is how to make the printer added to my network (Belkin router) servant. The wireless router is all set up and functional - I use actually it from now to access the internet and to post this message.

  So, my printer is installed on my laptop. The driver is the most recent, intalled today HP.com and I don't have a software disc to use for a Setup Wizard.

  What are the next steps to connect my printer on the network, so I can print wireless? If all goes well, I gave enough information. I have read all sections of the HP.com customer help on service and none of them seem to tell me what to do.

  Thank you!

  By a lot of trial and error, I actually thought about it myself. I did a lot of jumping around, so I hope that I can remember what I did:

  (1) install the printer driver using the diskette or download.

  (2) connect the printer to the router by an ethernet cable, which looks like a big phone cord (no need to connect the printer to your laptop).
  3) implement the system of the laptop 'search' on your laptop and in search type "Network" and then click on the 'Network' link to open it.

  (4) you should see the icon for the printer on your computers and other devices already present on the network.

  (5) double click/tap on the icon of the printer and it will open 'web page' the printer in your browser.

  (6) click / tap the 'Network' tab near the top of the scren.

  (7) in the left sidebar, under 'Connections', click 'Wireless' to open it.

  (8) start and use the wizard to enter your router information. (You must specify the printer a different name here, so you can distinguish it from all other printers on your laptop.) For example, I named mine "Deskjet" 6988 Network)

  (9) unplug the power cord of the printer ethernet.

  (10) If your wireless printer does not appear in the list of printers when you go to print something, you'll need to add:

  11) open looking for new portable computer system and type "Devices and printers" and click / tap on the link.

  12) click on the link "Add a printer" upward. The computer will search for printers and the new network printer should appear in the list (hint: he wil have an IP address in the 'Address' column rather than a file.)

  (13) add the network printer and run the test to ensure that it works. Make your default printer and may delete all other 6988 printers listed if you want to.

  (14) you should now see your network printer in the printer list when you go to print something.

  I hope this helps someone else someday!

• My ENVY 17-j092nr Notebook PC flicks or vibrates randomly on the log screen Windows and other software

  Im a pc user ENVY 17-j092nr Notebook PC (windows 8.1 with all the drivers) and the OS updates works very well, however sometimes im getting an annoying error that allows windows vibrates like crazy, the problem is a little weird to explain, it makes the BAR on explorer.exe folder flick and other executives 'content' of several software Firefox for example the top bar which is orange starts helpeless flick, or in vlc, it even move, and then the worst on the windows log screen, which makes my movies quick photo from the left to the centre several times per second, making it impossible to write any Password and its annoying when especilly simple pass off work (problem happens very often, but I'm not complaining here).

  The thing I've tried:

  -Change of mouse and video installation, screen, mouse and other dirvers in addition to their update.

  -With the help of build of Windows and external software trouble and repair ultilities.

  Updtading - OS (why? dk but I tried alternatives).

  -Electricity disconnection when this occurs (as sugested in other forums), did not work.

  -Clean the fan and avoiding any external particle on the laser mouse.

  Well well, not that im complaining about the laptop, which work very well over a budget, like it, it's just that the error which bug my HP to be good (if not perfect) experience, please someone help on this im looking forward to HP service work to help me fix this problem for good, is really annoying, especially when you try logging thx.

  I'm not Dunidar thank you for you time to grow another, I opened the cover of portable and yes I found a few in there, dead ants cleaned that upward I don't mind much about warranty or anything like that in any case thank you for your attention, you did a wonderful job help here , the problem has not demonstrated again the science I did it this morning so I think the ants where to do this kind of electric bridge I guess I DK much to this topic but, once again, thx for you excellent support cheers.

• Bluetooth and Wireless drivers for HP Envy 17-j170ca.

  I had to go back to Windows 7 64 bit on this laptop.  I have all work except for the Bluetooth features and wireless devices.

  I tried all the drivers available from HP the Realtek and RALink.

  Someone would be able to help?

  He is coming as a network controller and an unknown device.

  I also tried the update of windows with nothing doesn't.

  Fine thanks

  Hello:

  This 3D driveguard driver I posted is the driver which is necessary for this hardware ID.

  See if manual installation works.

  Run the driver file again.

  Go to Device Manager and click on the unknown device need drivers.  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software method and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66078. Make sure that the include subfolders is selected and see if the pilot goes like this.

• I have windows vista wireless portable and a USB connected Lexmark Z645 printer, but the printer does not seem to connect with the laptop when it comes to the first trial run, custom printing print

  Lexmark Z645, connected with USB won´t listen to my laptop windows vista wireless when it comes to the trial run first printing used

  Hello

  read information about the lexmark on this model drivers

  http://support.Lexmark.com/index?locale=en&page=product&ProductCode=LEXMARK_Z645&segment=support&UserLocale=en_AU&FromPage=null#2

  It comes to the installation of vista operating system instance

  Try the forum hardware and drivers

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all

• HP Envy m4 Windows 8 do not sleep and wake properly

  I recently got a HP Envy with Windows 8 m4, and every time I try to sleep, he never goes in mode 'sleep'. I'm assuming, since fans are always running up and the power light is still on (not flashing). If I try to wake him up, he doesn't. I tried pressing the power button, by clicking on the mouse and trackpad and typing on the keyboard. I tried to change the settings of the Control Panel, but nothing seems to work. Any advice would be appreciated.

  Hey yal! So, I don't know when it happened, but the problem is solved. I think that there is an update at some point, but I still am Kapersky and am able to sleep and hibernation.

• Using the two connections of cable and wireless on a laptop Windows 7

  I have a wireless router on my home network, which works very well.  Sometimes, I connect my laptop with a wired connection for faster speed during file transfer.  When I do that, I have 2 network connections: Wi - Fi and wireless.  Should I disconnects me wireless connection, or is it possible to have both connections at the same time?  Is it possible to configure Windows 7 to disconnect the wireless when it detects a wired connection?

  Thank you.

  It's OK to have two connections.  Windows automatically uses the one with the highest rated speed.

  I don't know how to have it automatically disconnect one of them. Steve Winograd, most Microsoft Valuable Professional (desktop experience)

• I wan to use connections cable and wireless with Windows 7.

  I use Windows 7. I have a wired ethernet connection, but also internal wireless.

  I want to be able to use both connections. I'm using VMware Workstation and it allows me to specify which adapter to use with the virtual machines. However, when Windows 7 detects there are two cables and wireless, it disables the wireless and automatically uses cable.

  How to use both?

  Hi Michael,

  Thanks for the reply. By the brand and model of the PC, I see that there is not a driver designed for Windows 7. Try installing the driver in compatibility mode. Is your problem with the virtual machines that you have running, the host computer, or both? If it's on the host computer and that you have installed the latest driver in compatibility mode for Windows 7, then it is probably a compatibility problem of driver/hardware that by default, this feature in Windows 7 works.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to configure a multihomed in Windows 7, wired network and wireless networks at the same time?

  Hello

  I have a fixed computer Windows 7, I need to configure for the use of wire and wireless networks.

  On the phone we transfer vast amounts of data, astronomy cameras than only products of 20 to 30 seconds, space images 3-4 GB each. The cameras are connected to the top of a tower, which in turn is connected via a 45 feet cable CAT-5 to the search engine.

  Internet access requires a wireless network connection.

  These two connections work - separately. I have to disable an and activate the other to pass. This jump back and foth is obviously a bit inconvenient.

  How to configure Windows 7 to manage both types of networks at the same time? On another forum I learned this kind of configuration is called multihoming, and it's something difficult to achieve.

  Having studied more about it, there is another possible solution called Internet connection sharing. that may be easier. I haven't used this option for years (since the routers were introduced) but is still active.

  Disable DHCP on the Dovado or use a cable between the PC and the laptop.

  Turn on the wireless on the PC and make sure that you have an internet connection. Disable wireless on the laptop. Connect the PC's LAN ports and laptop (via router or a cable crossover).

  IN the network of PCs and next to the connections Sharing Center, you must have 2 Ethernet and WiFi options. Double click on WiFi, then on the next screen, click Properties.

  The second tab in the next screen is sharing, check allow other users of the network to connect and then OK.

  Define the IP addresses for PC and laptop as in my previous post, but this time on the laptop set the default gateway to the IP address of the Wired of the PC port, the 1st DNS to the address of the Huawei and value of secondary school who suggested for your ISP.

  This affects your PC to access wireless internet and allows the laptop to access the internet via the PC

  Basic information about ICS are HERE

  Manuals for the Dovado HERE

• iTunes does not support Windows 10 modern watches over tablets and newer laptops

  Hello.

  Since Windows 8, there is a new mode called available standby connected standby (Windows 8), InstantGo (Windows 8.1) or modern (Windows 10) from the previous day.

  Tablets with Windows and newer laptops use modern sleep every time instead of old standby mode when firstly, it turns off the screen and after a while CPU turnes off (S3 mode AFAIK).

  Computer works now similar to a phone in a Pocket, you can listen to music or get a call (Skype).

  Here is the description for developers on Miscrosoft MSDN: https://msdn.microsoft.com/en-us/library/windows/hardware/mt282515.aspx

  Developers need to make their applications compatible with a modern Eve, otherwise application does not work while the unit is in standby modern.

  There is a Microsoft Groove app installed music on my book of Surface with 10 Windows, he can play DRM iTunes media, and continues to play when the screen turns off.

  12.4.1.6 iTunes seems to be incompatible legacy applications because it stops to play my music if I let laptop intact for 5 minutes.

  I tried to explain this to a phone Apple support, but they told me that this isn't a problem with iTunes but Windows and I need to get in touch with Microsoft instead of Apple.

  I can't use my subscription Apple same music in music Groove as a solution because it is unable to read the DRM from iTunes m4p files, of course it can not directly access cloud Apple music too.

  Is it possible to transmit this information to Apple?

  I don't understand why Apple let iTunes must be installed on Windows 8 + because actually it works terrible.

  For example, it can not switch audio speakers headphones and vice versa (while other applications that correctly), there are also some problems of video output, sometimes also the iTunes window receive a second bar tiny minimize / closing maximise controls, also the search field sometimes loose the keyboard input.

  Developers need to make their applications compatible with a modern Eve, otherwise application does not work while the unit is in standby modern...

  I tried to explain this to a phone Apple support, but they told me that this isn't a problem with iTunes but Windows and I need to get in touch with Microsoft instead of Apple...

  Is it possible to transmit this information to Apple?

  Oleg,

  Support staff does not normally deal in development issues, so it is quite likely that simply, they did not understand the question.  To report it directly to Apple, use the comments link:

  http://www.Apple.com/feedback/itunesapp.html

  When you send feedback, try to be as clear and objective as possible.

  iTunes has a huge population of Windows users, so I don't know that apple is interested.