Printe all-in - One HP ENVY 7640: Wired AND wireless?

Similar Questions

• Printe all-in-one HP Envy 7640: can not scan to computer

  Before moving to Win10 I could click the icon table of envy when I tried to scan to the computer. Now, when I click on it, the only thing I get a message asking if I want to change the settings on the computer. If I click Yes, it is said, then, if I want to add additional software to insert the original CD for the printer. I did it and it shows the installation, but there is no display being able to scan to the computer. What I need to uninstall the printer and the software to make it back as it was originally?

  Hello

  If please download and install the following software and driver:

  http://ftp.HP.com/pub/softlib/software12/COL55963/MP-134720-2/EN7640_117.exe

  I had to do the same thing for my old loan want 7640.

  Kind regards.

• PRI all-in-one HP Deskjet 3520: Deskjet 3520 printer all-in-one copy, but will scan and print computer

  This printer has always worked well... used only occasionally. The cartridges are fine.  Everything prints out fine computer, it scans very well, but does not copy.  Looks like it's copy, but shot out a blank page.

  Welcome to the HP community @273frustrated,.

  I understand that your 3520 Deskjet is no copy making more correctly however, you can print and scan without a problem. I will do my best to help! I might be far away but I suspect that there could be a problem with the printhead and it printing black ink. I say this because when you print from your computer, normally the ink colors mix to create a composite black, and when you print copies, it's only the black ink cartridge that is used.

  I want you to try a power reset and make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Please also try the procedure described in this guide and get back to me with the results when you're done and I hope that we can reach a resolution!

  Testify of my answer by hitting the thumbs up below and press the button "accept as Solution" if I have you helped a resolution!

  I hope this helps you!

  • Printer prints a blank Page or doesn't print black or color ink for the series of e-all-in-one-HP Deskjet Ink Advantage and Deskjet 3520 printer

• Printer all-in-one HP Envy 100

  I want to scan slides on this printer.  Can I do it?

  ENVY 100 all-in-one printer does not support the scanning of slides.

  There are several manufacturers that offer scans of slides or negatives. Here are the couple of scanners HP that support the digitization of slides:

  ScanJet G4050:

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-ScanJet-and-HP-fax/L1957A?HP-ScanJet-G4050-photo-scanner

  ScanJet G3110:

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-ScanJet-and-HP-fax/L2698A?HP-ScanJet-G3110-photo-scanner

• Printe all-in-one HP Envy 5660: obtaining a black page when I try to copy a document.

  Tried to copy a document. Obtaining a black page. Print preview displays also a black page. Full black ink cartridge. Tried to unplug the unit. No change. Any suggestions?  Thank you.

  Hey @JaneDeere ,

  The semi Full Reset is a complete programming on your printer reset. It resets everything on your printer, not only the wireless. Unfortunately, this reset is our last resort. Because the issue is still produced the last step would be the printer to service.

  I recommend at this point, contacting the Technical Support queue by phone to explore additional options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  When you talk with the phone support agent, please notify them of all the steps that we have done and the results of these measures.

  It has been a pleasure to work with you. I wish you good luck going forward with this! :)

• Printer all in one HP3520 - how to select the wireless network and enter the WEP key?

  According to print my wireless network is detected.

  How to connect the! @# % printer $ fo the wireless network and enter the WEP key?

  Instructions on the HP site tell me to selet NETWORK on the printer control panel.  Well, there's a way to select the NETWORK from the control panel.  It is not an option for him.

  I downnloaded and installed the latest drivers.

  I have restored the default settings.

  How to select the wireless network and enter the WEP key?

  All of HP's instructions seem to be for a newer printer with a touchscreen.

  I want that the printer is connected to my main computer via the USB port.  I want to be able to print wireless phones and tablets.

  My 3520 is not a 'touch Screen' and it has wifi.

  However, the following work:

  Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.

  This leads me to believe that ONLY the wireless doesn't work.  I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.

  Thank you for your help

• psc2170 HP printer all in one... newly installed and printer works, but cannot scan.

  I use a laptop Toshiba Windos vista.  A friend gave me the HP all-in-one and the software has been installed immediately when I plugged it.  However, there is no icon on the desktop or HP Director.  When I press the scan button it says "without exploring op."   How to the the HP Director so that I can use the other functions?

  Take a look at this link that explains your options of scan to the 2170.

• Printer all-in-one HP4504 ENVY: black & only cartridges printer HP ENVY 4504?

  As I ususally put my impression in black scale, can I just insert 2 rather than 1 black and 1 color black ink cartridges?

  In addition, my color cartridge has clearly not served so much is it good to put in a new black cartridge?

  Hello

  No, 2 black cartridges do not work, the printer must print cartridges three colors. You can configure your printer to print in black only, this will use very few colors. Please use the following steps:

  (a) double-click the desktop printer icon.
  (b) click on set preferences.
  (c) click on advanced.
  d select "black ink only" for printing in grayscale
  e click Ok /apply .
  
  Kind regards.

• Printe all-in - one HP Envy 5530: HP Envy 5530 continues to print

  My printer isn't printing. I turned off. Disconnected from the wall for 20 minutes, removed from my computer and added again. It still spit on the same document that I have already printed. If I cancel the work of pritn, it starts just a new. Over and over again. I think it's something to do with the "brain" of the printer.

  Help!

  Large. 96.4% now... ;-)

• Printe all-in-one HP Envy 5530: how you respond to a Message private to HP?

  I received a private message JeffC, Executive customer relations. He wants the info back to me. Been trying for 3 hours now trying to learn what I need to do to meet him. Nerves are frayed. How can I get help?  Read how to respond but did not understand the instructions.

  You are dealing with a very Senior Senior here, and these things are not easy for us.

  Can someone help me, please, before having a stroke?

  To meet a PM:

  1. Connect to the forum.
  2. At the top right of the page will be something like this: .  Right click on the envelope above.
  3. The above will take you to the message system.  Click on the subject of the message you want to answer.
  4. At the bottom of the page there will be a response button. Click here for the answer.
  5. Write your answer in the text box, and then click send a Message at the bottom of the text block.

  If you have problems with any of the steps, please indicate what number above is awkward and I'll take some screen shots and post them here.

• HP ENVY 4520 all-in-one: HP ENVY all-in-one 4520 can't turn off

  I can't turn off my printer, it enters mode "Eve" only.  I press the power button, it comes to life, tap again and ensure that as soon as the switch mode.  Any help would be appreciated.

  Hi @Freckles60,

  Welcome to the Forums of HP Support! I see that you have problems with putting off the printer. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Do a hard reset of the printer.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I would say for updating the firmware of the printer, to see if that can help, printer All - in - One HP ENVY 4520

  Select your operating system.

  How is the printer connected?

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please let me know the result and if there is anything else I can help you. Thank you.

• HP officejet 6978 all in a single p: hp officejet 6978 printer all in one, appearing to create its own wifi signal

  After I had my printer connected and working properly, I looked in my wireless options to connect to the internet. I have hooked the fine, but in these choices, was a connection option in/with? a hp officejet 6978 printer all-in-one. Before you buy and hanging upwards, connect this option was not there. Now, this is the case and showing a stronger than my router signal. This printer is able to be a wifi connection? Any ideas?

  That's great. I see nothing in the instructions, and the seller does not mention either. It seems to me that this feature would be another selling point. I do not necessarily want to disable it. I like the idea of having him as a backup, if my current one falls down, would only be an option? If so, I tried to connect using pw of my router, but cannot connect. This would have a default PW? is so, how do I find it. So thanks for your help. As I said nothing even alluded to this function...

• help with HP Laser CM1415fnw wired and wireless installation

  Hi all

  I have a hard wired and wireless. He let me just do one or the other. Is it possible that I can do both?

  everything works if I'm wired or wireless, but the user wants to be able to use both.

  Any help would be great.

  Sorry, cannot be enabled by design.  That said, the devices on a network don't like the way that others are connected.  You can print from a wireless connection to a wired (Ethernet) printer and v/v.

• HP Envy 4500 printer all in one

  My Hp Envy 4500 printer all-in-one lights up not down IT. If I unplug the power cord, then plug it back it then the printer lights for about 14 seconds and then turns off.  Any ideas?

  Open the link: www.hp.com/contacthp/
  Enter your product number or select Auto detection
  Scroll up to "still need help? Fill out the form to select your contact options.
  Scroll down and click on: contact HP options - click Get phone number
  A file number and phone number will be displayed.

• Want to 4500 printer all-in-one: new software and drivers for HP Envy 4500

  Hello, I bought this printer on 1 October and installed on my laptop Windows 10. My question is I noticed there was a series of printer e-all-in-one HP ENVY 4500 full feature software and drivers, version 32.3, filename: EN4500_198.exe which was released on November 12, 2015. Should I download and install this because I've had since October 2015 printer? If so do I have to do something after the installation to keep my printer working correctly on my WIFI wireless? Thanks in advance for any help that I couldn't find out how call HP to ask this question.

  Thank you very much for your answer! I finally understood how do I know what version of the software and the drivers, I have this morning and I don't have the version more recent and even I was wondering about. Thanks again and have a great Thanksgiving action!