DVD burner Burns do not

Similar Questions

• I installed plusv15 of real players and the dvd burner does not work. It freezes and told him to put in a disc.

  I bought plusv15 real player and it has been installed. for some reason any dvd burner does not work. A pop up comes up saying wrong disc record and replace it with a new drive. I did it three times. Real player support me staff referred to you. Windows dvd burner does not work.

  Hello

  I suggest you try to execute this fixit and see if it helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I would also ask you to contact the manufacturer of your computer to check the updates of the firmware of your CD/DVD drive.

  It will be useful.

• INSTALLATION OF THE FILES ON IPOD CAUSES MY DVD BURNER TO NOT BE RECOGNIZED

  How can after I download music on my ipod that the DVD burner is not working, I fix

  Hi erdocmg,

  (1) in order to clarify, are you referring to your DVD - ROM (Read - only memory) (DVD writer\burner) or drive DVD burning software?

  (2) you get an error message?

  If you are referring to the DVD - ROM drive, and then run fixit available in the link below and then check

  Your CD or DVD drive cannot read or write media http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Error message: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged" and dvd burner does not

  Original title: dvd burner does not work can not load the driver

  I get this message "windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.

  Can someone help me?

  Hi Garry_x,

  1. were you able to use the DVD burner before with no problems?

  2. you remember to make changes to the computer recently?

  This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  You can check out the following link and check for the resolution:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

  You can also read the following article and check if it helps:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

• DVD burner does not recognize blank dvd inserted

  DVD burner does not recognize blank dvd inserted into the pc

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error 'Dvd burner is not found' in Windows DVD maker.

  Original title: creating windows dvd, cannot find a driver

  I created a movie in windows movie maker when you're done, he sends to the creation of windows dvd to be burned. When I go to burn the dvd, he appears and says that a dvd burner can not be found.  I have two one on my laptop and an external. on the windows dvd maker there is a drop down menu to dvd burner which is empty. I'd appreciate any help u might have to offer. Thank you so much

  Look no further, You ' l find your answer here: http://social.answers.microsoft.com/Forums/en-US/vistamedia/thread/370bfb5d-73e5-4d98-9265-5b6be3c707ff

  All the best

  The man likes to play chess; Let's get him some rocks

• CD/dvd burner does not

  CD/dvd burner does not, tried to download the driver but nothing is made, when I try to burner anything or cd playback, nothing happens except when I try to burn a drop of water comes on saying connect burner and try again. the cd itself is rotating in the machine but it is not read then I can't play any CD at all even the drive to reinstall the driver for the cd/dvd drive. can anyone help please

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Create DVD error - the disk in your DVD burner is not a recordable DVD

  Original title: DVD creation error

  I am trying to create a DVD movie but it comes up with an error, he says "the disc in your DVD burner is not a recordable DVD", but it is! Any help?

  I'm using Windows DVD Maker

  Hi Alistair,.

  Welcome to the Microsoft community.

  It seems that you are facing problems during the creation of a DVD movie. We're here to help.

  1 have had any changes made on the computer before the show?

  2. the problem occurs for a specific DVD?

  I suggest you to refer to the articles and check if it helps:

  Solve problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-in/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Change Windows DVD Maker DVD-Video settings

  http://Windows.Microsoft.com/en-in/Windows7/change-Windows-DVD-Maker-DVD-video-settings

  Let us know if you need more assistance.

• my dvd burner can not read the cd/DVD, but it can write the DVD. Any help would be appreciated.

  my dvd burner can not read the cd/DVD drive, even when I put the dvd bootable windows it does not read, but it can write DVD. Any help would be appreciated.

  Hi shaikhsabir,

  Fix It at this link should solve the problem of not being able to read CD/DVD.

  Let us know if that helps.

• Double layer DVD burning does not

  The double-layer DVD burning does not work on my XPS420 w/vista.  The drive reads everything good and burns only 4.7 GB very well.  When you try to burn to a disc double layer blank he Burns half of the project (probably a layer), and then gives me an error message.  This happened with two different software.  Once with Roxio 10.1 included with the system and once with DVD Shrink.  I use an ISO image file appropriate.  My Player recognizes a disc blank double layer with 8 GB of free space.  During the burning process is when all else fails.  I downloaded the update of the firmware as well.  My thought is that it may be a media problem.  I virgins, disc double layer 8.5 GB DVD + R DL.  It's a brand off I've not heard of, but that was all that was available at the store.  It is a toshiba player, not sure of the model number.  16xRW +-.  Note: the front of the drive said no DL.  If all goes well they installed the correct drive.

  any thoughts?

  Thank you.

  Message edited by voiron on 2008-05-15 10:45
  
  

• -DVD burn does not work in the DVD player sometimes

  I have a Mac Pro from the beginning of 2008, and it came with a DVD drive (OPTIARC DVD RW AD - 7170A).  I was able to burn DVDs with using toast in the past.

  But lately, the half of the DVD burn won't play in my DVD consumer player.  I get a "Disk error" message when I try to play them, and they do not load.  It's a strange problem, because some of them work and some do not.  I can't tell where the problem is.

  Is there a way to test the DVD player?  Should I just replace it?

  Many brands of blank DVDs gives very inconsistent results when burning. If you use a brand store or generic blanks, that may be the problem.

• Satellite P200-1ay - DVD burning is not working properly

  Hey

  last month my dvd burner works very badly.

  I tried different types of media (Platinum/sony dvd + r), but every time it has happened in the last part of the dvd.

  Sometimes, he finished a dvd but in a standalone player, it will shock.

  New firmware may work, but I'm not now, I have a Ts-Lo802a with firmware t035.

  Hello

  You should take a DVD R TDK.
  I mad a goo experience with this kind of DVD disc.

  I had a similar problem. My burned DVD didn t work in one of my DVD players.
  A player can read but the other n t.

  I tested the TDK DVD-R and it worked on both players

• HP pavilion dv6 notebook (my dvd burner does not work

  I have a hp pavilion dv6 laptop. my burner does not work. I went to the Device Manager I uninstalled, shut down the computer, restart the computer, the device mgr.enable the writer went I have little yellow guest. still, the writer does not.

  I perform a driver update, the response was: the driver is already installed is to this day. My dv6 is 28 months old.

  need some advice.

  under Device Manager.  CD-ROM/DVD-rom readers

  HP cddvdwsn-208bb

  "device usb HP dvd writer 940D thank you billy'g"

  Hello

  Try please run now from the following link:
  
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Kind regards.

• I have portable E1 - 572 and my dvd burner will not burn DVD

  I recently had to buy a new hard drive and had to format and reinstall everything and do it manually display etc drivers, but did not do anything with the disc that the driver is already there v1.10 and no problem. I tried different burning software and it still won't burn DVD it will burn CD so the burner works someone can help with this question?

  Problem solved

  The dvd burner is fine. a couple of dvd discs were bad and unwritable. got a new batch of tesco and wala it works great and burns very well!

• DVD burner does not

  My Dvd burner on a laptop model Compaq presario CQ61 do not write and need to get a new one, please could someone let me know of a compatible player for model No. TSL63, spare part No. 517850-001 Hp

  Thank you all the research, I have now found a suitable drive

• LG supermulti dvd burner is not detected by the system.

  I wanted to install ATI RADEON HD 4350 and so I uninstalled the driver Intel (r) GMA. I installed the card on the motherboard and I have installed the driver provided by the manufacturer using their CD and I also did other necessary things. Everything worked perfectly. Then in the driver user interface, I saw two monitors. I selected one of them, without any judgement and turns off the computer. Later, when I put it on I saw there was not on my screen and indicator showed natural signal, which was red. So I uninstalled the card and connect the monitor to the onboard connector cable.

  Sometimes the HDD and LG supermulti dvd burner got detected (both or one of them) and sometimes they were not. When they were done detected the speed and performance of the machine was very poor. Monitor has also not getting detected in Device Manager.Then I managed to uninstall the video adapter driver and is also further things to slove the problem:

  Checking the SATA connections (my HDD is on the SATA1 and LG supermulti dvd burner is SATA 2), checking the other connections, Clearing RTC RAM etc, but nothing gave me a permanent solution.

  Then I did a BIOS update and I did an upgrade to Windows XP SP3, stay inside Windows and I also reinstalled driver Intel (r) GMA (new version).

  Now the problem is the drive is detected but supermulti LG dvd writer is not. But now the monitor is in my device manager and performance is good. Now what should I do to the system so that it could detect LG supermulti dvd burner?

  Two other points are:

  1. when I was using the video card my system was attacked by a Trojan horse, but now it's OK after running a full scan using KIS2011 and take necessary measures.

  2 is powered for the LG supermulti dvd burner because it is to open when I am pressing the button.

  System Specs:

  OS: Win XP SP3 x 32

  MB:Asus P5QPL-AM (it has integrated video card)

  The problem has been resolved by running a scan for hardware changes in Device Manager. I did it before but this time it worked.