DVD player all of a sudden are more recognized

Similar Questions

• my dvd/cd drive and all other removable drives are more recognized since an update from microsoft

  I need help! My CD/DVD drive has disappeared, it is not even in the BIOS, and all the other removable disks since I installed an update from Microsoft. I went through all the troubleshooting steps and nothing has worked, including the fix it. How can I fix it? I contacted Microsoft and back an email that I had to PAY for technical support to resolve this issue. Which seems hardly fair since there was an update on their part that messed up my laptop. I have a Gateway MX8738 with Vista Home Premium. I have not seen the error messages it just that there is no CD/DVD drive installed and when I check in my computer the only things that are displayed are the drives C and D.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
  (Read burn CD & DVD and CD and DVD). It's not unusual for 1 or 2 parts to not
  function, while others do so correctly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates
  and the correct registry entries for your car.

  Here are the keys to what I believe are the ones in question - for the CD/DVD drive subkeys
  course because there will be other subkeys in these keys. Do not forget to ask involved specific keys
  as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even right for registry settings
  your CD/DVD from someone with the same drive model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Media Player all of a sudden will not play the dvd. Error message: Windows Media Player cannot connect to the server

  Original title: Media Player all of a sudden will not play the dvd.

  Suddenly, I can't play DVDs on my laptop. The error message is: Windows Media Player cannot connect to the server. The name of the server are may not be not correct, ther server name maybe isn't available, or your proxy settings are may not be not correct. Any suggestions on troubleshooting of Microsofts page appear to be relevant.

  Hi mcraigQY

   

  1. when exactly you get the error message?

  2. you try to listen to music from any remote location or try to play a DVD?

  3 have you tried to play a different CD or DVD?
  4. what happens when you play the same DVD on another computer?

  5. for how long have you been faced with this problem?

  6. the DVD folder that you are trying to play supported by the windows media player is it?
  7. What is the type of DVD that you try to play?

  Let us know the answers to help you best.

• Drive SD-R6112 are more recognized - 19 Code error in Device Manager

  Hello!

  I have two lenses (one internal, one external) who suddenly are not recognized. Both are appearing in Device Manager with the same error as follows:
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  After uninstalling and re - install them both several times, including resetting devices still not change state.

  Currencies are: DVD-ROM TOSHIBA SD - R6112 (internal)
  TSST corp CD/DVGW SH-S182M peripheral USB (external)

  Both devices worked very well the last time I was on my laptop, 2 days ago.

  I guess I have to delete some registry entries, but without details, I'm not going there!
  Can someone help me?

  Thank you very much
  Photographer for customers waiting for pictures...
  Susan DeFurianni

  To my knowledge a registry problem was detected. This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  As far as I know Microsoft provides these options of solution:

  Click on uninstall and click Scan for hardware changes to load a usable driver.
  Restart the computer using safe mode, and then select last good known Configuration. This cancels the last successful configuration of the registry.

  In addition, you can try to remove the Upperfilters and the LowersFilters of this registry entry:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4 D36E965-E325-11CE-BFC1-08002BE10318}

  If it doesn't help then access Device Manager Reinstalls the channel primary and secondary section ATA/ATAPI IDE controller and reboot.

  Good luck and bye

• After the September 2016 ioS update my iphone or my ipad are more recognized on my laptop

  After the September 2016 ioS update my iphone or my ipad are more recognized on my laptop

  What do you mean on your laptop more?  Please provide details.

  Best,

  GDG

• My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

  My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

  You can check with the manufacturer of the camera, whoever it is.

  You can also remove the memory card and put it in a card reader that plugs into a USB port.  If you do not, you can buy them for about $3 in computer stores.

  Good luck.

• DVD player will not read the discs more after burn fail

  Something strange happen to my DVD player. I tried to burn a blank DVD but it failed without any error message: the DVD has not been recognized. Since then the DVD player will not only read one of my other burned DVD that I need for my daily work. Can anyone help?

  DVD players are not particularly robust, especially designed patterns for portability. It may have burned his laser for DVD work.

• My Media Video blackBerry smartphones and music ALL OF A SUDDEN are not supported

  I had my Style for 3 weeks and Yes, I have experienced the same issues that everyone else with a short battery life, internet speed and freezes, but what I really am becoming frustrated on is all of a sudden none of my material imported from the card memory or those integrated in the phone are going to play, I get a media type of message of the United Nations supported

  is sounds like your memory card is damaged and must be in the format KB10527. I would even recommend that you perform a security erase or reload the operating system on the device using the Manager Office b/c you say that the appliance is cold.

  or your device is a phone of the company located on a BES server and there is a strategy there that is causing the problem.

  If anything else - try a reboot - traction battery - or hold down alt, shift to the right and led.

• CD-ROM/DVD-rom are more recognized.

  I have a HP Pavilion 9000, running Windows Vista.  I can't get the laptop to read any CD or DVD.  I can't find drivers etc...

  I tried Mr. fixit nothing helps.  I checked the BIOS and verified that the boot order sees a CD/DVD player, even tried to change the order.  Device Manager is not a cd/DVD.  Registry has no upper or lower filters.  Help!  Trying to fix for the month. .  Feel free to cotnatct me to my user name at yahoo.com

  I would try a different CD-ROM drive first.

  you need to replace the motherboard, if the controller is bad

• HP Officejet Pro 8600 has all of a sudden is not recognized by only my computer at home

  Hi, I have 4 laptops in my house. We have all been connected wireless to my HP printer for over a year. All of a sudden, for some reason, my computer no longer sees the printer. I have an ASUS. I run Windows 7 with the Windows Firewall. My router is a Linksys EA3500 age of 3 months. I can print from each another printer at home, and I can also print from my Android phone. However, when I try to print from my laptop, he says now that it detects a printer has been turned off.  I did everything that I can think of to fix this. The only changes that I had recently installed program AV of Webroot. I can't be 100% certain, but I'm sure that I printed from this facility, and all the other computers on my network use Webroot as well without any problems. Hoping for help. Here's what I've done so far:

  1. Tried troubleshooting printer via the computer. He went through control of the coil and all service that the standard troubleshooting only. It says something about my printer is off. It certainly wasn't, but I unplugged and rebooted just to be sure. No solution.
  2. Noticed the IP has changed on the printer and thought that maybe something with dynamic vs static (don't know much about it) so went to 'update IP address' on my laptop and updated info. Checked the info of the router settings by entering the IP address of the printer in the browser. Printer shows connected and ready and everything seems good. I ping the ip with the results. Mac filtering is not enabled, so I don't need to deal with this. SSID is not hidden. 802.11 configuration indicates that the network type is WPA - PSK WPA2 with AES selected for encryption. As always, it has been.
  3. Double checked to make sure printer was recognizable by my firewall. It is on the accepted list.
  4. Last resort: I uninstalled the printer software and removed the device from my laptop. Attempt to reinstall, but when it gets to the part where it is supposed to search for the printer, it says cannot find. I enter the IP address of the printer and it does not always find. I enter the host name, and it does not always find. As I uninstalled it, I can no longer install the printer at all.
  5. Then to airline pilots and I tried using the installation via the online option. same results. "Cannot find the printer.
  6. I unpugged the printer from the wall, again, this time for more than an hour, hoping that it would reset, but visiting this probabaly account is not the problem since any other laptop can print in my house.
  7. Tried to plug in the ethernet cable and the printer this way. Plugged one end router and another printer according to the instructions of troubleshooting tips. Software disc and it does not install the printer. Change IP address on the printer when I use ethernet and I entered new ip accordingly.
  8. Reset my modem and rebooted. Resetting my router and then used software to reconfigure. do you have the standard "wait ten seconds and a plug in back and restart the computer". No solution.
  9. Check my network wireless adapter setting to make sure that I have more updated drivers. Yes.
  10. Delete everything that relates to my printer in each folder and in regedit.
  11. Tried to reinstall printer wireless both with ethernet. Unable to find the printer so be it.

  I haven't changed any settings I can think of since the last printer worked a few weeks ago. As I said, all other computers print perfectly. The only thing I can think of that is different is all oher laptops running Windows 8 and I am always on 7, but it's not serious before, and I can print from the HP printer on my phone software.

  Please someone tell me what I'm missing here. I'm going bonkers. Thank you very much to everyone who takes the time to answer on this support forum.

  Thank you very much for your detailed answer.

  I put a static IP address on my printer to 192.168.1.3. After several attempts to install the printer I just couldn't. I decided to run combofix and after that and a reboot I was able to install the printer successfully. Everything went as it should work. IP address is. I thought I was finally going to solve this problem. Then, I hit print a document and it doesn't have same queue in the printer.  I remembered that I read on how you need to go to the printer properties and make sure that the printer is on the TCIP port with the IP address. That was the problem. He had the bad IP. I changed the IP of what I changed to manually and voila. I print again.

  I think everything that happened during the changed dynamic configuration ip 192.168.1.110. I don't understand why all Win8 computers in my house didn't get affected, but I'm just glad that affecting an address static IP did the trick. It has been weeks since I've heard this thud hit sound of my printer from my computer.

  Thanks again for your help.

• After the upgrade to windows 10 my DVD player and second HARD drive is not recognized

  Hello.

  I upgraded my laptop - Acer Aspire 7552 G - 10 Windows Home and now my DVD player and the second HARD disk is not recognized by the system. In Device Manager, the material is indicated under "Unknown devices" and I tried almost everrything and searched for a solution in-house. Hope that there is someone who has a solution to this.

  Key of the Windows logo + x
  Click on Device Manager

  If the yellow exclamation mark or unknow device is present
  Double click on it
  Choose the tab "Details".
  in the drop-down list, select HardwareIDs
  Click the first value and paste here

• Windows media player all of a sudden I see nothing when playback video sound from very well, but I get like a psychedelic photo swirling in the video area looking...

  I can no longer see movies. I have sound but I have no picture, just a psychedelic research of swirl in the image. I'd appreciate any help.

  Hi elottier,

  1. what type of file you are trying to play?

  2. what version of Windows Media Player is installed on the computer?

  This seems to be a Codec problem. A codec is a software to compress or decompress a digital media file, such as a song or a video. Windows Media Player and other programs use codecs to play and create digital media files.

  Try the steps from the following link:

  You receive an error message when you try to play an .avi file in Windows Media Player

  I hope this helps.

• I bought adobe lightroom 6 and I don't have a dvd player for installation. What are my options?

  I bought a bunch of material fliming from amazon including a laptop, a camera and adobe lightroom 6. When I bought the lightroom I assumed that it would have a piece of paper or a sheet inside to say "If you don't have a dvd drive, use this worksheet instead" but open open all there is a drive and a serial number. What are my options? y at - it somewhere I can introduce my serial number and get a free download?

  Please try to download digital photography of software | Download for free Adobe Photoshop Lightroom CC and try to serialize Lightroom CC trial to activate using Lightroom 6: https://helpx.adobe.com/lightroom/kb/serialize-lightroom-cc-trial-to-activate-as-lightroom - 6.html

  I hope this helps.

• All of a sudden receive more messages from yahoo but sending works always

  When I log in Tbird, a message appears saying "Download xx messages" and the progress bar moves along. However, nothing appears in the Inbox, not in the junk folder or deleted.
  all parameters have not changed but had a problem with a spammer at the time, the problem started, I created a filter to remove anything from that address, that the garbage was not on Yahoo, just Tbird
  Send always works.
  Fundraising direct mail of Yahoo always works.
  checked the port and pop email

  This audio description to file corruption. (same date) Compaction of a file erase corruption, but he is very aggressive with mail and data loss occurs generally if the folder is damaged.

  Then move the folder to another mail, then right-click on the folder and select compact.

  If this does not work, connect to Yahoo using a browser and empty your spam foplder and see if that helps at all.

• URGENT - AE CS4 does not support all of a sudden AVCHD more!

  Hey everybody,

  everything worked well. I could video import AVCHD in AE and PP. I then added soundbooth CS4

  later as I don't have not installed with my first installation. I don't know if this is a reason, but today

  I started AE and PP, and he says:

  After effects error: could not import the file "00021.MTS": type of file not supported or extension (0: 1).

  I then did an upgrade that included something like fix for import of hardware HD LCA... for the first. Now

  I still have an acvhd import in PP material but not yet in the AE which is real pleasure that I need to work

  on a project.

  What can I do? That's happened? Any help much appreciated!

  Best,

  Alex

  Glad to hear that you solved the problem!