DVD Player Will NOT force him to leave

Similar Questions

• My dvd player will not read my disk of Windows 8 Pro upgrade

  Computer laptop Dell Vostro 1500 with XP Professional, my TSSTcorp L632H DVD player will not read my Windows 8 upgrade disk.

  It will read other DVDs. I've updated the firmware.

  The properties of the drive is display type as unknown file system CD player with blue disk image but used space and free space as 0.

  By using Device Manager, when I ask him to fill the volume is the disk CD 0, Type DVD, free media, not applicable Partition Style, capacity, space Unallocate status and placeholder show all 0.

  I also tried to use a separate USB TSSTcorp DVD drive and it will not also read the Windows8 disc.

  My desktop (Windows, 8, 1) DVD drive Asus computer reads the disc of Windows 8, but I can't use it to load Windows 8 on my laptop - or what I can?

  Can I connect my laptop to my desktop to upgrade laptop computer at Windows8 use of the desktop DVD player?

  I managed to copy the disc of Windows 8 on an external hard drive using another laptop that can play the DVD.

  Then I attached the external hard drive to my laptop and run Setup from there and installed Windows 8 to my old laptop to Windows XP...

  Thanks for your suggestion.

• DVD player will not read the discs more after burn fail

  Something strange happen to my DVD player. I tried to burn a blank DVD but it failed without any error message: the DVD has not been recognized. Since then the DVD player will not only read one of my other burned DVD that I need for my daily work. Can anyone help?

  DVD players are not particularly robust, especially designed patterns for portability. It may have burned his laser for DVD work.

• The satellite A40-151 DVD player will not play DVD

  Hi my dvd player will play music CDs, but when I try to play a dvd, it is simply a beep and nothing don't get going I tried windvd and it lights up, but everything is blurred and still wont read dvd

  Hello

  Very bad situation here! What will you do now? Replacing the drive maybe?

• Satellite Pro A100: CD/DVD player will not play the audio CD or video DVD

  People,
  I have a Satellite Pro A100, with a RUG * a DVD-RAM UJ - 841 S Drive.
  It will read fine data disks, but refuses to play with the audio CD or video DVD.

  I tried to uninstall & Re-Installing DVD - RAM Driver;
  That got rid of the "IO error" that I received, unfortunately I don't notice the full error: S.
  He now just doesn't see the drive. Someone at - it ideas?

  I did a full windows update, and the Toshiba Diagnostic util tell me anything useful except "Fail" :(

  I found a thread in this forum that describes a similar theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19747&MessageID=72404

  Sometimes this error is displayed because the player does not support the environment.
  Always it is every way is supported by readers and I think that in the user manual, you will find an index CDs or DVDs compatible

  Maybe the drive is defective and can not calibrate lens in the right position.
  But this laptop is not very old, and I can't imagine that the drive is defective
  However, nothing is impossible.

  What you can do is to carefully clean the lens and see that it will help.

• Satellite M40-145: CD/DVD player will not play some DVD

  Hello!

  I am the owner of a Satellite M40-145 bought a little over a year; DVD driver worked perfectly until three days ago, but today I discovered something... strange. Still, it reads the DVD business and burned the DVD + r, but apparently it does not read the DVD - r serious more. I tried with different DVD - Rs, I burned the same DVD player, without success; trying to access the DVD gives a message "insert the disk in drive D:".

  In this case, I'm talking about movies on DVD. Please tell me there is a way to fix this without sending the computer to the customer service...
  I wouldn't think he fell down a few days after the expiry date of the guarantee.

  Hello

  Well, you can try to remove the Device Manager order form.
  After restarting again the reader should be recognized again. Then, check if it is possible to read the DVD - R, CD.

  But the question sounds like a lens calibration error. If you use different media, the lens must be calibrated again. But if this procedure fails, the drive is not able to read or write the DVD for example.
  Unfortunately, in this case only the replacement of the drive will resolve this problem.

• Qosmio G30-176 - DVD player will not play

  The dvd player won't play or even say that there is a disc please help

  Hi Paul

  Your message is very short and you don t provide all the details, but I will try to provide the answer to a problem.
  First of all, this looks like a hardware problem. I mean the lens of the drive cannot calibrate in the right position and would have problems.
  In this case the player would not be able to manage different CDs or DVDs.

  But first, you should try this
  Access to the registry and try to remove the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this withdrawal, restart the computer.

  I read that this accelerated procedure to solve the different CD/DVD drive problem.

  But if you will not be successful then a hardware problem is possible and only a replacement of drives could help.

• Satellite P200-1EE: HD-DVD player will not work

  HD DVD will not work on my new laptop p200 1EE.
  I read some of the messages to similar problems, it takes hours to download updates of software, firmware etc.
  Configure without success.

  I just received my free HD DVD about 4 days ago and have complained to toshiba.
  I can't even drive coming on the screen as a HD DVD toshibas.

  I can't get the windows media player.
  I want to say that you buy a TV and dvd player and search around for parts to get it to work.
  Its ok, the upgrade of software to get additional features on the material, but to make it work even not.

  All of the suggestions.

  Hello

  Yes, I think I can help you.

  Please update the HD DVD from Toshiba and the firmware of readers!
  Two updates are on the European driver Toshiba page!
  That s all. There is no magic solution!

  HD DVD is a new technology and there are differences between the unique mediums. There are different standards, it seems that this was not known to you

  However, the update of the firmware and the HD - DVD Player update helps resolve this issue!

  Good bye

• CD and DVD player will not open or read

  My USB does not open. I got the message no program associated with the file.

  I reformated the by the advice of Verbatum USB flash drive.  Now the Flash Player works fine, BUT no optical drive will not work.  I can insert a disc into the CD or DVD drive, and it won't play.

  I can click on one of the icons for the drives in my computer and they do not open or play.

  I need help to solve this problem.

  I have Windows XP Home Edition and running IE 8 with all the updates of Windows and IE.

  Help please.

  You can try AutoPlay Repair Wizard from Microsoft here:

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=c680a7b6-e8fa-45C4-A171-1b389cfacdad

  Download the tool... click Next and select cd/dvd drive and try to open it and such.  Then click on begin Test, and you might find an answer to your problem.

  ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

  I suggest this one below

  Even better...

  http://support.Microsoft.com/GP/cd_dvd_drive_problems is Microsoft Fix it... It will run a diagnostic tool on your 'question' click on this link and it will take you just

  What it fixes...
  • Your CD or DVD drive does not read or write and is shown as disabled
  • The media in your CD or DVD drive cannot be read
  • The media cannot be written for your CD or DVD drive
  • You receive one of the following errors:
    • A specific class or a specific device driver is missing or damaged
    • A CD or DVD drive is not found or is not connected
    • The CD or DVD drive is faced with a problem which does not work properly
    • The CD or DVD drive is not accessible via a drive letter assigned
  How it works...
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then

  

  Automatically solves the problems that it encounters, and

  Offers additional resources if the problem is not resolved

• DVD player will not read is no longer drives

  Recently, I went for 2 weeks - when I left my computer was working and my dvd drive could read all my disks (mainly games)

  My return however (and after the installation of 18 updates last night) the bed DVD player is no longer just about any type of media disc (having already be able to read all). However, whenever I needed it for work, he did, I noticed that before I left my DVD player had played a bit and seems to be trying to read discs (making the noise of rotation).

  Anyone got any ideas on what this could be and a possible fix?

  (im running windows vista and the drive is a tsstcorp DVD + - RW TS - H653B ATA)

  Thanks in advance

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD player will not open

  I am running Windows Vista 64-bit with all maintenance applied.  My computer has two DVD RW drives.  When I push the eject button physical on the drive, the tray opens for a while and then quits.  If I select "eject" on the graphic display (Windows Explorer), the behavior is the same - the tray opens for a while and then quits.

  Here's the new readers.  I just replaced them, since the old disks had the same problem, and I assumed the old disks were somewhat defective.

  If I just start the update of the BIOS, the problem goes away - I push the physical eject button, and the drawer opens and stays that way.  For this reason, I guess that the problem is not the faulty discs, but something that makes Windows.

  Hello

  It's my general troubleshooting Guide for problems of CD/DVD, and maybe it will help you with this unusual problem.

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Qosmio G50 - CD / DVD player will not read disc

  I've seen similar posts on this problem but I have not solved my problem. Sorry if it's repetitive for some.

  My * DVD drive is visible * on my computer, but when I put one * disk in it does not display / run * (it cannot be read).

  I tried to use the automatic thing to delete the files in the upper and lower register. And I tried to reinstall the driver.

  PC diagnostics said the DVD player has failed the test, but is not a solution. Nor can help Microsoft fixit.

  Please can someone help. Thank you

  You can use optical disc as boot device?
  ODD readable disks bootable?

• Equim M40x: DVD player will not change the region even with 1 change remaining

  I have a Toshiba Equim M40x with a carpet * a DVD - Ram drive 830 s. My children recently tried to play a region 2 dvd and it failed with the message the DVD player is set in a different region.

  When I went into Device Manager to change the region (it was set to 1), it showed that I had a chance to change.
  However, when I tried to change it, I received an error message: "unable to update region setting. Please make sure the drive contains a region 2 media and you have the privilege of the administration. »

  I tried to put a region 2 dvd in the drive and I have the privilege of the administration and it still does not work.
  I then went looking for firmware free region for this disc, and of course, it does not exist.

  Help!

  Hello

  It of not possible to unlock the DVD player on a legal way.
  Of course, I found many sites that suggest that it of possible to unlock the firmware flash drive.
  But believe me; It is not desirable and very risky!
  You may damage the disc and then you can not read or burn CD or DVD media!

  I assume that you have already changed the region 5 times code. In such cases, it s already locked.

• Qosmio G30-163: HD-DVD player will not recognize the Matrix Trilogy

  It is the last issue. WinDVD HD crashes after playing the opening for Blood Diamond and The Island WB logo. I posted a message about it, but it disappeared.

  Anyone know when the last update is due? He has not been one since December 26.

  Thks

  This post initially you're talking about? :
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=95884#95884

  I have checked the European driver of Toshiba page and chose the Qosmio G30 PGQ31E series and found the update to the most recent Firmware for HD DVD-R + r DL DRIVE (SD-L902A) and for the readers of disc-DVD-HD TS - L802A.
  There are two different firmware updates.

  In addition, I would recommend looking for an update of the HD DVD player. It of necessary.

  Toshiab HD DVD player update was published on the Toshiab driver page. Update!

• Toshiba DVD player will not play

  After that the battery on my laptop was missing with a DVD in the drive, the drive can read is no longer a DVD

  Hi GretchenHoyt,

  ·         You are able to locate the DVD drive in Device Manager?

  I suggest you try the steps mentioned below and check if it helps.

  Step 1: Uninstall and reinstall the DVD player.

  (a) click Start, in the search box type Device Manager and press to enter.

  (b) Device Manager window opens, right-click and click on uninstall to uninstall.

  (c) restart the system, it will reinstall the drivers again.

  Also update the drivers for the DVD player.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly