DVD RAM becomes cd when the blank disc inserted

Similar Questions

• Try to burn a CD. The system will not recognize the blank disc or let me burn__

  Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted

  Hello

  Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.

  If no joy:

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Audio CD does not automatically play when the CD is inserted

  I have my settings set to read a CD automatically when the CD is inserted.  I insert an audio CD, and nothing happens.  No music.

  Hello

  Welcome to Windows Vista community responses.

  (1) made audio CD playback with Windows Media Player or any other third party software?

  (2) have you been able to use this feature before? If so what are the recent changes on the computer?

  Windows does not read the CD-Roma automatically if you only use the real-mode CD-ROM drivers. Protected mode drivers are called to play CD-ROMs automatically when you insert them into your CD-ROM drive.

  To manually change your auto CD play settings in Windows Vista

  1. open the control panel by going to the start menu.

  2. double-click on the default programs icon.

  Now choose the third setting down. Change AutoPlay settings.

  

  4. now you can choose which action to perform with which program.
  5. press on the drop-down menu to make your choice.

  

  Response please back and let us know if this helped with your question or let us know if you need more assistance.

  Kind regards
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• for some reason any recently my habit of music automatically play when the cd is inserted in the central processing unit and I have the program windows vista

  How can I get my music to play automatically when the cd is inserted and I have windows vista premium program

  Solution to http://windows.microsoft.com/en-us/windows-vista/Change-AutoPlay-settings

  I hope this helps.
  Paul

• How to find when the row was inserted? (timestamp)

  This has been asked several times, but is at - he new methods to find out the time when the row was inserted?

  I tried to find out using ORA_ROWSCN. But his is not accurate. It shows the update, I believe and do not show the dose if the line is inserted before long.

  Previous designers thought that it is not necessary to include the Date added and updated the columns when they were designing the database.

  This has caused a lot of problems when it comes to analyzing data and verification.

  Please help, this would make my day.

  Thanks in advance:

  Dbms_logmnr can signal when INSERTING; If the archived REDO log file exists

• DVD - RAM drive does not recognize blank CD

  When I check the properties of the DVD-RAM drive before inserting a CD, to the title of the record, I find the check box turn on CD on this drive already ticked. After that I insert a blank CD in the drive, DVD - RAM turns to CD. When I double-click on the CD icon, a warning message appears "D:\is is not accessible. Incorrect function ". When I opened the properties with the blank CD in the drive, I see that the box enable CD recording was erased. Not to mention that the screens of CD Free properties 0, use 0. If I once again re-checkmark the box above then CD resumes its normal operation with Windows built-in CD burning software, but continues to display an incorrect number of bytes in the areas of free / used. I installed on my Roxio Drag-to-Dsc computer. Let me emphasize that my DVD player had performed flawlessly with Roxio installed from the beginning. This problem came only recently. Is it possible to disable Roxio without uninstalling the computer?

  Hi Richard,

  You can check if the following is useful.

  Method 1: Run the next Fixit tool to check the issue.

  Your CD or DVD drive cannot read or write media

  Method 2:

  Step 1: Uninstall and reinstall the Device Manager DVD player. Automatically search for updates to the firmware on the manufacturer's Web site.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager.

  c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

  d. restart the computer.

  Step 2: Log on to the DVD drive manufacturer's website and install the latest updates from driver\firmware.

  I don't think that there is a way to just disable Roxio. For more help, you can contact Roxio support.

• cannot burn CDs, insert the blank disc rpet

  I continue to insert a blank disc, but it will not burn

  Hello

  I suggest that you follow the steps in these links and check if the problem persists.

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - click on Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• Re: Satellite A210-12U: Mat * a DVD - RAM UJ-8505 will not read discs - error Code 39

  Hello.

  I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.

  The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.

  The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA

  I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.

  Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.

  What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?

  was soon Dan

  Hello

  Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  and restart the laptop

  See also this article from the Toshiba FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  and the Microsoft Knowledge base
  http://support.Microsoft.com/kb/314060/en-us

  Good bye

• DVD - RAM drive cannot read the CD on my Satellite M40X

  I bought a satellite pro m40x. The dvdram drive can only read dvd but not cd ROMs and music CDs. I tried already with the original ones. I upgraded the bios but nothing changes. Thanks.Paolo.

  [Edited by: admin on 03-Sep-05 17:09]

  Hello

  It of very unusual. Try this: go to the properties of the drive DVD ram (right-click).
  Somewhere in the properties is a checkbox to enable digital CD PLAYBACK. Make sure this box is checked.

  In Autoplay make you a corresponding task is associated with music CD and not action.
  Load a music CD and then right-click on your CD-ROM drive. There should be a PLAY option.

  If the DVD player not working after this change, so I think that it s something wrong with the hardware.
  In my opinion, you should contact the service partner.

  Good luck

  Good bye

• Context of the sequence becomes invalid when the runtime is longer

  I have a sequence that loop for about 70 k iterations (which is pretty huge). The sequence called a subsequence where the inhabitants of the sequence called are modified. Question is, around 65 th iteration k, I get an error message indicating that the reference of the local past is invalid. The number of iterations when the error occurs varies from one computer to another, but always in the 65 k range. When I try to run another sequence (a single) consecutively, I get an "out of memory" error I guess the reason why the local reference is not valid because TS execution stops when the memory TS gets the complete decision-making context of sequence and therefore the reference local section not valid.

  I would like to know how to reduce the consumption of memory of TS because I disabled the result of record for all the result of sequences (Configure-> Options of Station-> run), disabled registration for each iteration of the loop, optimize no reentrant calls thi sequence is also enabled. I even tested with just this sequence of sequence and I wonder if there is a maximum number of threads of execution when a loop.

  PC configuration

  RAM-12 GB

  LabVIEW and Teststand 2010 SP1

  I will not be able to view the code, but the closure is a custom step which has sequence call as its adapter.

  Hello

  I tried this:

  Main sequence called a sub sequence, which includes 3 stages of instruction.

  I have a loop sequence sup to 75 k with result logging enabled.

  TS runs successfully - no problems.

  Try to jump steps (one at a time) in the sequence of sub to know at what stage leads to this question.

  Also try to reproduce using a simple sequence (that you can post online).

  Ravi

• HP Dvd - Ram Gh80n not recognize the DVD blu - ray

  I am running windows 7 Home premium. My Hp Dvd - Ram Gh80n does not recognize a DVD blu-ray-this is store bought. I have tried several different dvds, & have read on different devices (IE: ps3, laptop, dvd player). Device Manager does not display any problem or updates available.  AutoPlay is enabled, didn't try a get command prompt reading disk a device not ready & state no media for the volume of the list. If I put in a blu - ray player NO I receive the news dvd with healthy state.

  I think that the reason that he will not read a blu - ray is because it is not a Blu - ray player.  Here are the specs:

  Basic specifications
  Product Description HP GH80N Super Multi - Tickets (±R DL) / DVD - RAM drive - Serial ATA
  Device Type drive (±R DL) / DVD-RAM drive
  Case type internal
  Black color
  Serial ATA interface
  Dimensions (Lxdxh) 14.6 cm x 17 cm x 4.1 cm
  Weight 0,8 kg
  Optical storage drive (±R DL) / DVD - RAM - 5.25 "x 1/2 H
  Read speed 48 x (CD) / 16 x (DVD)
  Write speed 48 x (CD) / 22 x (DVD±R) / 12 x (DVD-R DL) / 16 x (DVD + R DL)
  Rewrite speed 32 x (CD) / 6 x (DVD - RW) / 8 x (DVD + RW) / 12 x (DVD-RAM)
  Buffer of Protection against the fixed support Yes
  Certification Microsoft Compatible with Windows 7
  General
  Device Type drive (±R DL) / DVD-RAM drive
  Case type internal
  Black color
  Serial ATA interface
  14.6 cm wide
  Depth 17 cm
  4.1 cm height
  Weight 0,8 kg

• Why the file name of the file as an attachment with Annotations "attach a file" (trombone) become unknown when the observations are published?

  Our company recently purchased Adobe Acrobat Pro XI intended to be used for shared electronic reviews.  We use the send for shared review in Adobe Acrobat Pro XI, and all the comment tools work as expectedexcept the trombone in Annotations.

  When a Word or Excel or Image (png, jpeg) file is attached using the trombone of Annotations, the initiator may initially see and open. But once feedback is enabled and the review file is closed, the file 'Name' becomes 'Unknown' (even if the Description is the correct file name and extension).  Change information are unknown, such as size and compressed size.

  When the control file is then reopened, even the initiator cannot open the file, although:

  • The location of the file is marked with the paper clip in the document.
  • The file name is displayed in the list of comments with the name of the initiator.
  • In the list of attachments (the paper clip under the thumbnails and bookmarks), the name appears as unknown, shows the file name Description, update is unknown, the size is unknown and compressed size is unknown.

  
  

  The file name cannot be published, although the Description file can be.

  We have followed the procedure described in the tutorials but may not know how to resolve this situation.  As this feature was the reason for the purchase of Adobe Acrobat Pro IX, we would any help. Please leave out the basics because we are new users.

  We have several people with Adobe Acrobat Pro XI and the rest have Adobe Reader XI is a Windows platform.  Can someone please give us some advice how to get this function runs as described?

  The bug is fixed in the latest Adobe Acrobat Pro XI 11.0.09 update (update: in Acrobat Pro, go to help-> Check for Updates...).

  -Rohit Sharma

• How can I reload CS5 when the installer disc will not initialize?

  Have the original disc of CS5. Deleted Adobe Audition to my PC when I had a problem

  find a file I had just recorded. In the past, reinstall went out the hiccups and everything was fine.

  Now, despite repeated attempts, the installation program will not initialize... He's here. Tried the

  Download softward useful... but nothing there has no effect.

  He has created a number I'm supposed to hang on to: 40-57766-210312062013 for

  whatever it is interesting (less?). Arrrrgggh!

  If you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

• CD/DVD drive starts spinning when the Satellite X 305 - Q701 is disabled

  Hello

  I just bought X 305-Q701. Everything works fine, but the only thing bothering me.

  During his tours, DVDROM periodically starts spinning and some noise and I can eject DVD anytime, as I said the laptop is off.
  It doesn't seem strange or its ok?

  Thank you

  Resolved, brought to BestBuy and took another

• [8510w] system shuts down / is not start when the card is inserted

  Hello
  my old 8510w developed a bad thing - when the power cord is inserted, system will shut down. Works fine on battery.
  Symptoms:

  1. stops when the power cord is inserted;
  2. does not start then on the power supply;
  3. charge led flashes in unusual ways - led is quite low, but gets a little more brilliant ca once per second;
  4. power led lights also dimmed down mode.

  I tried another adapter as well, so that should be good. I would like to know if this problem is known and could be repaired (quite easily), or there is no point to this end by like old computer as 8510w.

  -------------------------------
  8510w
  Debian Wheezy / Win7

  Measure the output voltage of the AC adapter does not prevent the failure of adapter to even the slightest charge.

  If the laptop will not start even with an identical power adapter connected and remove the battery, then it is very likely that the electric distribution/charging circuit on the map system of the laptop has a faulty component.  If you're a troubleshoting capableof until the component level and bulbs to solder you can fix the system board. Most people choose to replace the motherboard or laptop.