DYMO disc painter

Similar Questions

• Isolate the Group mixture & knockout in AE?

  Hello

  Are the functions isolate the Group of m & a knock-out (as in Illustrator) available somewhere in AE?

  I mean I have some animations to do in AE with a work of art by the Illustrator.

  Problem is that the work is made from discs painted with slopes using the screen modes which interact with each other to create the desired (on the static artwork) effect of merger. And these discs are divided into subgroups, disks interact in subgroups, but groups do not interact with other groups (where use to isolate option fusion).

  I need animate these discs and keep the screen modes "in the groups' merger in AE.

  Is it possible to do this and how?

  Thanks for help.

  1. Free your disk to layers using the construction group, drag the layer above layer 1, and then open in AE in the form of composition.
  2. Select all the layers of the disc and before dialing, open the demo, duplicate layers and parents each dupe with her twins.
  3. Select all original layers and drag them to the top of the demo, and then click the preserve underlying transparenty switch.
  4. Animate the position of the discs in the demo.
  5. Collapses not transforamations into the main computer
  6. There you go. Isolated blending modes.

  Got it here's a project file with the updated file.

  

• I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.

  I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.  I use it often and would appreciate any help to recover!

  Please download and install Photoshop CS6 from the following link: download Creative Suite 6 applications

• Solutions to the problem of CD/DVD drive cannot read DVD discs

  This article will tell you 3 ways to solve the problem of the CD/DVD drive do not read the DVD disc. Please the process step by step.

  Solution1. Clean the DVD disc

  If your Player cannot detect the DVD disc, the first thing you need to do is to clean the DVD disc. Use a soft and dry cloth (not painted) to wipe the disc from the center of the disc to the edge. Please take care to not to use a paper to clean the disc with a circular motion, it will scratch the disc.

  After cleaning, inert the DVD on the drive to see if it works, if the reader can't read the disc, use a cloth of cotton wet with water or alcohol to clean the disc. After the disc dry, inert re the disc on the drive. If the reader can read, the operation is complete. If this isn't the case, please turn to the option2.

  Option2. Check the disc to see if it has been damaged

  Draw the DVD from the drive and check if there are some scratches or small cracks on the disc. If the disc is damaged, please try another DVD disc to see if the drive can read. If the drive cannot recognize the new disk, there could be a problem with the CD/DVD drive. Please turn to solution 3.

  Solution3. Clean or repair the CD/DVD drive

  When a CD/DVD drive has been used for a long time, its ability to play disc will only get worse. Then, the reader can not read some discs, or blocking your computer in the middle of the reading disc. This is usually due to the aging of certain parts of the disc, CD/DVD player dirty.

  Open the drive to check if the DVD reader accumulates dust and dirt, if so, the cold air from the hair dryer allows you to clean the inside of the DVD drive. Be sure to not blow on the optical sensor orally, or clean it with a cloth of cotton with water or alcohol. After cleaning, insert a DVD disc on the drive to see if it works. If still no, you need to call the s command customer service or take the reader to a computer repair shop.

  Post edited by: Newhampshireguy

  Thanks for sharing your experience with us!
  I think your assignment might be useful to others here in the community.

• paint for xp

  I can't find paint for xp; I looked in start, all programs, accessories, and nothing!

  The paint program should be in the Windows folder system32 subfolder.

  You should be able to invoke it by...

  • Click Start
  • Click on run
  • Type mspaint and press enter

  If the shortcut is not there you can create one, the target must be %SystemRoot%\system32\mspaint.exe

  If the painting is not in the system32 folder you can get installed through Control Panel-Add or remove components Windows Add/Remove programs and then looking for "Details".... "(click the button) for"Accessories and utilities", then"Accessories ". For painting and the checkbox, click OK twice, and then click Next >.

  If the box is checked, you can try uncheck to uninstall and the reticking to install again. This should bring back the shortcut from the start too.

  You may need your Windows installation disc to go through the (re) installation-.

  Tricky

• I deleted accessories (paint, etc.)

  Somehow, I got a screen that I know now I found via: Control Panel > Add/Remove Programs and on the left of the window, select Add/Remove Windows components >

  I thought that I take away 1 or 2 files that I didn't need.  However, instead, I have lost accessories including the calculator and the paint.

  So I followed this: If you want to reinstall, go to Control Panel > Add/Remove Programs and on the left of the window, select Add/Remove Windows components > Accessories and utilities and select Details and Accessories selct details again and then check the paint.

  But he wants a CD and I do not have the CD.

  Help

  What alternatives can I.

  Hello

  To retrieve the accessories on the Windows XP-based computer, you must have a disc.

  I suggest you to contact the manufacturer of the computer and check the recovery disks.

• whenever I try to open any image editing with paint-it tell me it is not a valid WIN32 application

  I click on the thumbnail as usual, then I click on the icon of the painting - but I list asking me what program I want to use to open the file (usually jpeg - but mostly ANY file of the photo.  When I click on paint-i tells me that is not a valid WIN32 application.  It worked perfectly until I was told one have a fake version of windows on my computer.  I have a legitimate version but when DELL sent me my computer the doesn't have to send me a copy of windows, only a so-called repair disc that does not work.  mainly, I just want to open my photos with the paint change.  but I you might fix this confusion with the legality of my copy of windows that would be great.
  I tried to contact dell at this topic but no response yet.  I am physically disabled and the computer is my "lifeline" to my friends and my family.  Please help me with this.  Thank you.  Robert

  Hello B0bman1,

  Thank you for your message.  Let's try combining .jpg with paint.  Please follow the steps below:
  Open Windows Explorer by right-clicking on the Start button and then click Explore.

  Click a folder that contains a file of the type you want to Windows to open in a program you select.

  Click on the file and, depending on the programs installed on your computer, do one of the following steps:

  Click Open with to choose the program you want.

  Point to open with and then click on choose program to choose the program you want.

  The open with dialog box appears. Use one of the following methods to select the program you want to use for this file type:

  List programs, click the program you want to use.

  Click Browse, find and then click the program you want to use, and then click Open.

  Click Look for the appropriate program on the Web to surf the Internet for the program you want to use.

  Click to select the always use the selected program to open this type of file check box if it is not enabled.

  Click OK.
  Found at http://support.microsoft.com/kb/307859
  Please let us know if it did or it does not solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Corel Paint Shop Pro Photo ultimate

  I recently bought Corel Paint Shop Pro Photo ultimate and have not yet been able to install it on my vista machine.  I contacted Corel and the support rep has worked on my machine remotely for more than two hours without success to get the program to run.  After the new program was installed and launched a windows warning message appears indicating that windows had closed the program.  I get an error message when you install the software that reads the following:

  Error 1402 - could open key Unknown\Components\a42bc89bfz5f5bdoaf18c3b991a1ee8\1bf27e46343277944b8a62c25dd3bo3d not check have sufficient access to that key or contact your support team.
  Technology Corel updated my software to the motherboard as well as my software of Nvidia graphics cards.  He ran the Configuration of Windows Installer utility and malware remover.  The program has always failed to launch.  During an attempt to later install the above opinion included a line of unknown module whereby the tech told me that there seems to be a corrupt file or error in the Windows program and that the program Corel cannot be installed until the error is fixed.  It offered no suggestions on how to correct or even to identify the error.

  I don't know what is the error when it is or how to fix so that my software can be installed on my computer before you reinstall the operating system.  Unfortunately, I don't have a copy disc of the operating system that is pre-installed on my computer.

  Any help will be appreciated.

  Thank you

  Hello spen7072,

  Thanks for posting on the Microsoft answers Forum.

  1. Select "Start", "Run" and type Regedit. Click OK.
  2. select HKEY_LOCAL_MACHINE
  3. in the menu, select "Edit," "permissions". A dialog box will appear.
  4. check 'Allow' to 'Read' and 'Full control', and then click OK
  5 Expand HKEY_LOCAL_MACHINE and repeat steps 3, 4 for keys 'Software' and 'system '.
  6 expand the 'Software' key and repeat steps 3, 4 for the 'Classes '.
  7 expand the "Class" key and repeat steps 3, 4 to "install".
  8. If you have made changes in steps 1 through 7, go to step 10. If you have not done any changes, proceed to step 9.

  9. open the 'Classes' key and click on "install". In the menu, click on 'Security', 'permissions '. Click on the button "Advanced". Select 'Reset the permissions on all the objects children.', then click OK

  10. close the registry editor
  11. restart the computer

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

   
  Hope this helps for you allow to install your program.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. .

  while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. After the closure of this msg several times I get the message .xml configuration could not be loaded. This may indicate that the file is corrupted. I tried downloading the software and the software disc and get the exact same message. Does anyone have any ideas as to what is happening and how to fix it?

  Hello

  ·          You have an earlier version (trial version) of Corel painter, installed on the computer?

  Step 1: If you need to uninstall the trial version and then try to install the full version of Corel painter.

  See: http://www.corel.com/servlet/Satellite/us/en/Content/1248977106333

  Step 2: I also recommend you contact Support Corel to this topic and see if they have a solution - http://www.corel.com/contactus

• Download pictures from a film directly on scanner Vista 'paint' using the TIFF TIF format.

  I would like to copy quite a number of slides and negatives of my innovative technology Film Scan 351 for MS Vista 'paint' for available myself of the chance to use the quality of the TIFF format. I would like to download to use this format. I guess that the paint would allow me to 'fix' the photos who need.

  My next step would be to burn photos to a CD - R or DVD-R individually, not as a slide show. Last but not least play the disc on a CD/DVD drive.

  Thank you.

  Hi Ripperdog,

  A. what happens when you try to transfer files from a scanner in Microsoft paint

  B. What is the format of the file you are trying to copy?

  To copy images in Microsoft paint

  1. On the file menu, click Save.
  2. In the Save as type, select the desired file format.
  3. In the file name box, type a name.
  4. Click Save.

  Transfer files to movie maker

  1. Open Movie Maker.
  2. Click fileand then click import media items.
  3. Navigate to the location containing the digital media files you want to import, then click import.

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker

  Burn a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-burn-a-CD-or-DVD

  Hope this has been helpful.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I copy a disc C D F S

  How can I copy and modify a disk C D F S

  Hi Mapo,

  You cannot change the format of files to a file located in the drive. To change the file format you must first copy the files to the Local hard disk. After copying the files, you can check the below link to convert file formats and check if it helps. If you are not able to copy the contents of the disc, it could be due to copy-rights applied to disk.

  Change the file type of the image (file format) using paint

• I have a disc in my Mac and can not understand about where to go read the content?

  I have a disc in my desktop iMac computer and can't figure out how to break through the buttons right or my computer to read the content of the program?

  Double-click the icon of the disk on the desktop. I hope that you have installed an application that can read the content for you.

  If you don't see the icon of the disk on the desktop, open the Finder, then go to the Finder menu bar and click Finder > Preferences, and then select the general tab and then make sure: CD, DVD and iPods is selected.

• My MBP is showing a "Remote Disc" in the list of devices. It's not a hard drive.

  My MBP is showing a "Remote Disc" in the list of devices. It's not a hard drive. So where did it come from? I 'get info' on this subject, but it doesn't tell me a thing.  He sees the disk drives elsewhere in my house? It's to see my iPhone as a remote disc? The photo with him is a DVD or CD gold. It drives me crazy.  I am running OSX Sierra.

  This has been on the Mac for a while now... Here is a link that can better describe it.

  Use the CD or DVD drive from another computer with your Mac - Apple Support

• Disc is stuck in drive iMac

  Eject and command-E do not cause the disc to eject from the drive.

  First option: reboot the Mac and hold down the mouse button while it starts. This should trigger the disc eject mechanism.

  If this fails, restart now Option button to get the start menu, and then press the keyboard's eject button.

• How to use a blank disc DVD-R as a USB flash drive?

  Hi all! I'm running Mac OS X 10.9.5 on my MacBook Pro and I was wondering how I could use a blank DVD-R disc as a form of rewriting for documents, music, spreadsheets, etc. ? My mac Let's burn me to the disc, but I can't rewrite to it after that. Help, please!

  They don't work that way. Rewritable means simply you can erase the disc and use it again. You can't write it during normal use of the disk. This, to a USB flash drive.

  To be same rewritable, you can use a DVD - RW, DVD - r not it is not rewritable. You can look for third-party software that allow you to use the drive as a flash drive, but I am not sure that these programs exist. Not much need for it.