Dynamic action using the box in a table

Similar Questions

• Dynamic action on the box using jQuery selectors

  Goal: Have a classic report with a checkbox for each record that fires a dynamic action. I want to the source of the value of ID/relevant in Javascript (in the end, PL/SQL)
  
  Consider a classic report by using the following query

  SELECT label
  ,apex_item.checkbox
    (p_idx   => 15 -- f42
    ,p_value => id
    ,p_attributes => 'id="f15_'||id||'" class="xyz"'
    ) chk
  FROM   my_table

  Define a dynamic with action
  Event: click on
  Selection type: jQuery selector
  jQuery selector: .xyz
  No condition
  Scope: Bind
  
  I have an action, execution of javascript

  var me = this.triggeringElement;
  console.log('me:'||me);
  console.log('name:'||me.attr('name') );
  console.log('id:'||me.attr('id') );
  console.log('value:'||me.prop('val'));

  Affected elements selection type: trigger
  
  When I run the page and check a box, the lights of the DA, but all the output shown in the console log is empty.
  I tried the abundant variations to get this right, such as the use of $(this.triggeringElement)
  
  These pages trust me, I have the right syntax
  http://StackOverflow.com/questions/12038392/Oracle-Apex-checkbox-to-manipulate-other-values-when-checked-unchecked
  http://iadviseblog.WordPress.com/2011/08/24/get-triggering-element-in-da/
  
  But my values are still set to null? Anyone know what I missed?
  
  Apex 4.1.1
  
  Scott

  var me = this.triggeringElement;
  console.log('me:'||me);
  console.log('name:'||me.attr('name') );
  console.log('id:'||me.attr('id') );
  console.log('value:'||me.prop('val'));
  

  
  
  • Concatenation in javascript is with + * not * | * (which means OR)
  
  
  • In addition, this.triggeringElement is a reference to the DOM element, it is not a jQuery object. If wrapping in $ () is required when you want to access the properties through jQuery.
  
  
  • prop ('val') will not work. You must check for the existence of an attribute to the property line, which, in the case of a checkbox control, could be "verified".
  
  
  • dynamic action on a report: using Live to prevent the features to work when the report is updated/paginated
  
  

  var me = $(this.triggeringElement);
  console.log('me:'+me);
  console.log('name:'+me.attr('name') );
  console.log('id:'+me.attr('id') );
  console.log('value:'+me.prop('checked'));
  

• Dynamic action using the datePicker in APEX5.0

  I want to use dynamic action with dates in APEX 5.0 picker such that after the selection of start_date and end_date interactive report should display data for the selected date range.

  I first created an interactive report in the APEX and then created a page with date elements pickers.ln my database table, I have a column name time_stamp, who is with the date format varchar2 data type YYYY-MM-DD - HH24:MI:SS.

  Looks like my request for interactive report below:

  Select * from table1 where time_stamp between to_char(to_date(:p1_item,'YYYY-MM-DD-HH24:MI:SS'),'DD-MM-YY') and to_char(to_date(:p2_item,'YYYY-MM-DD-HH24:MI:SS'),'DD-MM-YY')

  (where p1_item and p2_item are the page numbers for the selectors of dates), the 'Mask of Format' attribute for the selectors of dates, I put to JJ-MM-AA. Now, I need to define a dynamic action to run my SQL query of interactive report based on the selected start_date and end_date arguments. I need to know more about the steps to create such dynamic action and look for the detailed steps to what attributes must be defined to achieve this.

  Help, please.

  Thank you

  Mukul

  I did notice that the column time_stamp was varchar2. You can use this query:

  select *
    from table1
  where to_date(time_stamp, 'YYYY-MM-DD-HH24:MI:SS') between to_date(:p1_item, 'DD-MM-YY')
    and to_date(:p2_item, 'DD-MM-YY')
  

  And if you remove it your selectors of dates format mask then you could be simpler:

  select *
    from table1
  where to_date(time_stamp, 'YYYY-MM-DD-HH24:MI:SS') between :p1_item
    and :p2_item
  

  You have need of other attributes.

• Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  I use the version of Vista Home Premium.

  While I don't really like how the UAC area enters the information that tells it when to display the box tell me about your work of things on the UAC (I know an article exist on the web), is not how to answer this question.

  There is no log of UAC elevation file.

• How do dynamic actions using work to set the value in all browsers?

  I'm having a problem of incompatibility between browsers with dynamic actions to help to set the value.  Dynamic action works like a charm on Chrome but has no effect on IE or Firefox.  The code in oracle.apex.com and here are the credentials:

  Workspace: DDBA

  Username: [email protected]

  Password: redtruck12

  These codes is on page 3 and here are the details:

  There are two lists of report (Standard and special) and some reports require additional information provided in the lists of selection or text boxes.

  If the user selects a report select Standard requiring a list/text box, then the dynamic action sets the value of the special reports to NULL (and vice versa).

  Dynamic action is to prevent a simultaneous Standard reports and special selection.  To see how it works on Chrome, follow these steps:

  
  

  1. Run the Page 3
  2. Select the "Search report" option in the list Report Standard .  A text 'Search criteria' box
  3. Select the option 'Release report' in the list of special reports .  A selection list appears and disappears from the text box 'search criteria '.

  If you do the same on IE or Firefox, the text box does not disappear.

  Hi Edward,.

  Please check page 4 of your app, I made a copy of your page and made a few changes:

  I have set up an example of dynamic action 1 this hanles the report and special report selection list.

  Dynamic action games, select the value of the selection list and he accompanies in detail the report lists to null and then submits the page.

  For this I have deleted the page submit events to the time the report and special report select lists. Instead I handed them a HTML class. The dynamic action is triggered by a change of this category of html.

  When the trigger is the report selection list, select special report is set to null. Also underlying selection sub lists are set to null.

  When the trigger is the special report selection list, the selection of the report is set to null. Also underlying selection sub lists are set to null.

  The two end of the action with a "Send" page to manage the show and hide appropriate items. Note that there is a lag in time due to the submission of the page. As I have suggested, it would be treated better by a refresh of the region. On the other hand you depend on now submit for the continuation of the treatment of your page. With the help of an update of the region would require a work more javascript and cost more redisgn of your page. If you need IE8 support, additional javsascript likely to cause other unexpected behaviors. In other words, a page is maybe in your case probably better then an update of the region after all.

  I checked this page 4, Chrome, Firefox and IE (latest version) and I get the same behavior in all browsers.

  Kind regards

  Vincent

  http://vincentdeelen.blogspot.com

• Dynamic action - defining the value of affected parts

  Hello
  
  I'm a little trouble trying to set the value of several items affected in dynamic Action (refresh the number of the part to Page 2). Page 2 I want the user to select the order number and fill in the items combines automatically, for example part number Descr. I can make it work for Part_Number, but the same value appears when I add P2_DESCR to items assigned to set the value. I'm probably doing something really stupid!
  
  http://Apex.Oracle.com/pls/Apex/f?p=11536:2
  
  Kind regards
  
  Mickey

  Hi Mickey,

  It is not as easy as it should be, even. You certainly do not make something stupid at all!

  Currently the action 'Set value' support only 1 distinct value. You might have other 'Action' within the same dynamic action that returns the other element you want, but it's inefficient, you need to make 2 round trips to the server to retrieve each value. We are looking for the opportunity to put multiple values without needing more trips to go back out of the box in a future release, but for now I think the best approach is to use a custom mix of dynamic measurements, JavaScript and a level of page AJAX callback.

  For this example, I use the EMP table, where the user selects the number and the name of the employee and employment are returned, but the technique can be used for your situation.
  

  
  
  1. Add a page 'AJAX Callback' called 'GET_EMP_INFO', make the type "PL/SQL" with a "Point of process" of "On Demand - run this process when requested by AJAX ' and add the following code:

     begin
         for c in (select ename, job from emp where EMPNO = to_number(:P1_EMPNO)) loop
          apex_util.set_session_state('P1_ENAME', c.ename);
             apex_util.set_session_state('P1_JOB', c.job);
             /* Add more set_session_state calls here if you want to return more item values */
         end loop;
         apex_util.json_from_items('P1_ENAME:P1_JOB');  /* Add more here for returning more values */
     end;
     

  2. Create a dynamic action "Advanced" (because we need to use the action "Run JavaScript Code"), with the following attributes:
     
     
     
     • 'Change' - to the fire of the dynamic action every time the number value used change event.
     
     
     • Selection of Type 'Article (s)' - to be able to select the element of page employee number.
     
     
     • Article (s) "P1_EMPNO" - the page employee number element.
     
     
     • Real Action "to execute JavaScript Code. If you want details on the loading of the page as well, make sure that the 'Fire when loading the Page' checkbox is checked. Add the following "Code":

       var get = new htmldb_Get(null, $v('pFlowId'), 'APPLICATION_PROCESS=GET_EMP_INFO', $v('pFlowStepId'));
       get.add('P1_EMPNO', $v('P1_EMPNO'));
       gReturn = get.get();
       json_SetItems(gReturn)
       get = null;
       

     
     
     
     
  
  
  
  So, basically, that's all. I recommend this approach for now, until better support us in native mode to set multiple values, or a plug-in dynamic action arises that does just that!

  Hope that helps.

  Kind regards
  Anthony.

• dynamic action sets the value of the element, but not save to DB on submit

  I'm working on a page where the value of several to show only the page elements are defined using a dynamic Action.  They are set when the user selects a value in a list of selection (and is based on the value of the selection list).  Dynamic action is triggered on a list selection change event and then runs the real action "set the value.  The selection list displays the names of sales representative.  The three fields dynamically filled are the org structure (that is, their chain management).

  For the action to set the value, I use a defined Type of SQL statement:

  Select VP, DIR, MGR

  of SALES_ORG where SSR =: P20_SSR

  In the affected elements, I have fixed Type of selection to the 'item (s)"and the value of the Item (s) for 'P20_GVP, P20_DIR, P20_MGR.

  Dynamic action works fine for the display of the page (that is, when I select a sales representative in the selection list dynamic action properly updated only display value fields three).  This page is a form in which the user submits information relating to the rep.  When the page is sent, all fields are filled in a new record of DB with the exception of three that were populated dynamically above.  These fields get the values NULL.

  When the dynamic action updates the values in the three fields is - it does not set the value of session?  Why these fields don't are not taken into account in the submit other ideas > process Page?

  I use 5 APEX with Chrome on Mac (Yosemite).

  Thanks for the note.  I didn't only display the items could not be used in this way.  I think I'll take a different approach with the design; given that the org structure is in another table that I can simply refer to that by rep when necessary rather than saving the information uploaded to the page of the form.  The reason why I have not fill the screen only the points of loading the page is because I don't know what the values should be until the user selects a sales representative in the selection list.

  I'll change the design to one of the following:

  1) change the display only items of standard text field.  NOTE: if I make the text read-only field that causes other problems when loading (I get the message "violation of protection Session state").

  OR

  2) do not include org structure in the download folder and just refer to table org Rep when necessary.

  Thank you!

  Steve

• APEX 5. Dynamic action on the CHANGE event does not work after applying the filter on IR.

  APEX 5.

  Dynamic action for the CHANGE event does not work after applying the filter on IR.

  Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry

  Real action

  Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code

  Is TI WHEREAS behavior?

  I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.

  Concerning

  mdyla

  mdyla wrote:

  It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.

  Set the dynamic scope of the event action to Dynamics.

• Can not set a value by the executed dynamic action on the page element "selection list."

  I created an agenda of the page 'list of selection' and I want to when I change a value in another element of the page set only 'screen '.

  I created a dynamic action on the page element "selection list" for this.

  These are the dynamic action attribute:

  When:

  ======

  Event: change

  Selection type: point

  Article: P29_PURCHASE_ORDER

  Condition: No strings attached

  Advanced:

  ========

  Scope of the event: static

  Identification:

  ==========

  Action: Set

  The ' Action Page when the changed value "attribute of the element of 'list of selection' = 'None', and when I run form the dynamic action run and set the value for once and do not update the value according to the change in the article"list of selection. "

  Note: when I change the previous attribute of 'Redirect and set', dynamic action run and properly value, but the value was hidden soon

  I want to value when the value of change of select list according to this change successfully.

  Please, advice me,

  Best regards

  Mustafa Ezzat

  Hello

  you set the value of the 'Page elements to submit' to P29_PURCHASE_ORDER?

  Then, the SQL statement would use the current selected value.

  This is the help text says: "specify a list separated by commas of the elements of the page that will be submitted to the server and therefore available for use in your"SQL statement"," PL/SQL Expression"or"Body of the PL/SQL function".»

  Kind regards

  Erik-jan

• Dynamic action for 2 fields in a table

  Greetings!
  
  I have a requirement where I need to disable/enable a field in a tabular presentation for a specific record based on the value of another field in the tabular presentation for this record.
  
  In a concern for discussion, in my particular case - if FISHCOUNT > 1, then the LENGTH must be disabled. If count < = 1, then the LENGTH must be enabled. It should disable it only records where FISHCOUNT > 1.
  
  I would do it with dynamic action and I learned through this forum (thank you!) that I can use jQuery for the event (when) the section of the dynamic action.
  
  So that the part would look like:
  
  Event: change
  Selection type: jQuery Selector
  jQuery Selector: td [headers = "FISHCOUNT"] select
  Condition: above
  Value: 1
  
  So far so good. But where I'm stuck is how to reference the LENGTH field of the tabular form in the actions of TRUE and FALSE, so that when the change in the event product (FISHCOUNT), the LENGTH is disabled if FISHCOUNT > 1, or LENGTH is enabled if FISHCOUNT < = 1.
  
  SEO so the scope of the CASE of my tabular presentation in the actions of True and False, that's where I need help.
  
  Thanks in advance!
  
  I use APEX 4.1.1

  John,

  You can do this by creating another dynamic action with the event 'Front Page submit' ("framework events" section).
  With real action that executes javascript, load the page uncontrolled.

  $("input:visible:disabled").prop("disabled",false);
  

  This will select all elements disabled entry visible on the page and remove the disabled property.

• Dynamic action on the region

  Hello
  
  Request Express 4.1.0.00.32
  
  I have a report region on a page that is conditionaly displayed depending on the value of an element of page Pn_ITEM = "HIDE".
  
  I have dynamic stock running on the page that fill a collection and update the report without the need to submit the page. However, I need to show the report somehow when the collection contains at least one of the members present.
  
  I tried the following:
  
  1st real action running pl/sql that adds a record / member of a collection, then a 2nd action sets the value to a page Pn_ITEM = true 'SHOW' action item and a 3rd that should show the region based on the value of the real action 2.
  
  My collection has an added member. The value 'SHOW' is applied to my article on Pn_ITEM page by the dynamic action but the region of report I want now displayed is not displayed. Obviously if the page is submitted, the report will now be shown however I can't send the page at this stage that's why I need to do this dynamicaly or through javascript and on the application process.
  
  Any ideas how to get my region report to display once the collection has at least one member without submitting the page?
  
  Thanks in advance.

  Remove the requirement for the view from the region. You don't want this here since it completely stops rendering region if the condition is not fullfilled to the render time. You want that he made, but not displayed.

  Add css to the region (inline, class):

  style="display: none;"
  

  Add real action that will do a refresh on your area (component - refresh, select your report as an affected item region).

  Now, either:
  Add a real action of type run javascript. Since you can not put conditions on the real actions, we will test the condition in javascript.
  Choose one:

  if($v("Pn_ITEM")=='SHOW'){
  //if you want to target the region to be shown by an ID (static id?)
  $("#region_id").show();
  };
  

  if($v("Pn_ITEM")=='SHOW'){
  //if the triggering element would be the region to be shown
  $(this.triggeringElement).show();
  };
  

  if($v("Pn_ITEM")=='SHOW'){
  //if you'd want multiple affected elements to be shown at once drop the [0]
  $(this.affectedElements[0]).show();
  };
  

  Create a new dynamic action that has the same conditions of release as your other dynamic action.
  Specify a when condition:

  $v("Pn_ITEM")=='SHOW'
  

  Create a real "Show" type action to show the region.

  Final result should be your dynamic action creating an item in the collection, an update of the report based on the item (but still not represented) and finally a show in the region.

  Remember that stocks will also fire on page load (so don't forget to check the box on the actions of true), otherwise the region does not appear initially.
  I would say that the item is probably not necessary, but depends on any other logic, you might have on your page and possibly interacts with it.

• Dynamic action on the points of the apex

  Hello
  
  I have a requirement like after the entry of date of birth in the element. then the age value must be defined dynamically.
  
  How can I set the value?

  Hi Tulasi,

  Follow the steps below

  Click on create button dynamic action
  Select the advanced type
  Give a name

  event - on the evolution of the
  selection type - point
  Article (s) element of your page (used to select date of birth)
  condition: no strings attached
  action - code PL/SQL Execute
  Fire on the loading of the page - white

  PL/SQL - code

  declare
  v_age varchar2(100);
  v_dob date;
  v_sysdate date;
  begin
  
  select sysdate into v_sysdate from dual;
  v_dob := :P1_DOB;    //here P1_dob is a page item from where i am selecting date of birth.
  
  select trunc(to_char((v_sysdate - v_dob)/365)) into v_age from dual;
  :P1_AGE := v_age;     // i have created one item named P1_AGE to display the calculated age.
  end;
  

  Page elements to send = P1_DOB / / replace with your agenda of the datepicker page

  Elements of the page return = P1_AGE / / replace with your article.

  Hope this will give you an idea.

  Thank you and best regards,
  Jitendra

• Help with dynamic action and the selection list item

  G ' Day Apex gurus.
  
  I have problems trying to achieve to trigger the Help window from an element automatically select. A Help window is triggered when it is clicked on the label of an item, but my customer wants to be triguered automatically as soon as the user clicks to view the options in the select list.
  
  I think I should be able to do with dynamic actions but I can't function.
  
  I know when someone clicks on the label of the item selection list trigger this JavaScript
  
  JavaScript:popupFieldHelp('277938589795252851','1545903379570909')
  
  So I want to trigger the javascript also when the user click on the item selection list and pull down the options and for that I think that the dynamic action is the way to go, but I can't do things.
  
  That's what I have to do:
  
  I created a dynamic option as follows:
  
  Name: test
  Sequence: 30
  Even: click
  Selection type: product (s)
  Article (s): P1_RATING <-a selection list item
  Condtion: - no requirement.
  
  Real Actions
  Sequence: 10
  Action: Run the JavaScript Code
  Fires when the result of the event is: true
  Fire on loading the page: checked
  Code: javascript:popupFieldHelp('277938589795252851','1545903379570909')
  
  Thank you anyone who can tell me what I'm doing wrong here or bring a solution to my problem to trigger the Help window from an element automatically select.
  
  Kind regards
  Carlos

  Hi Carlos,

  I've set up a test case of exactly in the same way and it worked fine for me. I've created a page element called P1_DA_DEMO and added some values of the static selection list, then added a help text. I used the settings are lower, I suggest you try again, but also make sure that you have no other Javascript errors on the page. Use a tool like firebug to check.

  Name: Action Dynamics demo
  Sequence: 10
  Even: click
  Selection type: product (s)
  Product (s): P1_DA_DEMO<- a="" selection="" list="">
  Condtion: - no requirement.

  Real Actions
  Sequence: 10
  Action: Run the JavaScript Code
  Fires when the result of the event is: true
  Fire on loading the page: unchecked
  Code: javascript:popupFieldHelp('277938589795252851','1545903379570909')

  Scope of the event set a Bind s.

  Thank you

  Paul

• It's what I get everytime I try to search using the box on the start menu search failed to initialize.

  It's what I have whenever I try to use the box of departure/Chantal search failed to initialize.  The research won't do anything except say failure to initialize.  I tried to "msconfig", but nothing happens.  Is there another way to get around this?
  Mary G.

  Try this fix:

  Reset to the default Windows search
  http://blogs.technet.com/b/fixit4me/archive/2009/04/24/reset-Windows-search-to-defaults.aspx

• Impossible to use the box of favorites - a pop up appears saying unavailable location

  original title: IMPOSSIBLE to USE THE FAVORITES BOX-APOP-UP to POSTER SAYING LOCATION NOT AVAILABLE

  Whenever I try to use the box of Favorites (top-right), I can use the tabs 'RSS' and 'History', but not the "Favorites". Instead, I get a message saying: 'not available place '. Can someone out there help, please.

  Edward Baker

  Hello

  I suggest try to reset Internet Explorer and check to see if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-7-settings

  It will be useful.