dynamic disk recovery issue and I cannot make a primary partition

Similar Questions

• I am trying to install Windows XP and during the process, a message appears with the title "RUNDLL__Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.

  I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
  "Error in iesetup.dll Missing entry: IEAccessSysInst.  The process then stops and I cannot make progress.

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• How can I make my printer Brother HL - 5150 D work on Windows 7, he said: it is not compatible and I cannot make it work.

  How can I make my printer Brother HL - 5150 D work on Windows 7, he said: it is not compatible and I cannot get

  Microsoft has decided to change the "internals" of "device drivers" how to "interface" with Windows and devices.    If the material does not have a driver for Windows 7, it's a 'result' of the device 'manufacturer' is more "willing" to support the older device.  Microsoft does not have drivers for Microsoft not branded device.

• My shows desktop ACTIVE DESKTOP RECOVERY above and States to make off go to properties and uncheck the boxes on the web, but nothing has changed and I can't change the view of the Office either.

  When I go into the properties I can't change desktop theme. Even go to customize and unchecking everything in the web, it doesn't change anything. How can I get rid of this Active Desktop recovery?

  Hi BevBrown,

  You did it of any material changes or software on the computer before this problem?

  If the issue took place recently, try to do a system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Hope the helps of information.

  Please post back and we do know.

• Tried to password - protect folders (VERY important issues) and now cannot find/access them at all!

  That's what I had to do what I did:

  http://www.AddictiveTips.com/Windows-Tips/how-to-lock-and-password-protect-folder-in-Vista/

  Clearly, I clicked too much / the wrong thing, because these very important issues (for my work) are now completely inaccessible for me. This is not correct. I need them to work. Can someone help me please? (I feel like such a fool!)

  I tried restoring the system (twice) and nothing has changed. I have google and google to try to find a way to fix this, but so far have gotten nowhere! I'm a sort of panic... hoping someone can help me!

  So what (s) you refuse permissions on this folder? If deny you permissions to everyone, then of course your own username has been included in this group. Out of this is to start the computer with a Linux Live CD or USB key and the copy of the data in the files to external media such as a disk external hard USB or USB key. Linux will not honor Windows permissions. Then delete the files while in Linux. If all goes well, they are not system folders but are only folders you have created yourself. Then start in Windows, create new folders, copy your data to them. If you explain what and where are the files and what restrictions you want to give, we can help you to do this properly.

  http://Lifehacker.com/5504531/the-complete-guide-to-saving-your-Windows-system-with-a-thumb-drive
  http://www.howtogeek.com/HOWTO/17044/move-files-from-a-failing-PC-with-an-Ubuntu-Live-CD/
  https://help.Ubuntu.com/community/LiveCD
  http://www.Knoppix.NET

  MS - MVP - Elephant Boy computers - don't panic!

• Disk recovery (GMR400712PT0) and by Satellite L300

  Will be the recovery disc with reference GMR400712PT0 run on Toshiba L300?

  Thank you!

  AFAIK Satellite L300 has been delivered without the DVD recovery and only with HDD recovery so I assume that's not original recovery DVDs.

  Where did you find?
  By the way: your native tongue is Portuguese?

• Help, please! I can't select the shape I drew with the pentool again... I have the selected layer, but there is no sign of my new shape in my path Panel?  I have been sitting here for days literally and simply cannot make it appear the race that I created

  HI - can help I'm going crazy! !

  I drew a shape with the tool pen (which took me Age..) and I go back an image that I imported, I cannot select once again it.  I can see it in red, but I'm not able to select once again it.  I have the selected layer, but there is no sign of it in my Panel of traces at all.  I tried clicking on the direct Selection tool (about 100 times), I tried the Brush tool.  I've tried everything.  The same thing happened to me the other day...    Please can someone help!  Tania

  It's the plug technique on the subject:

  Using Photoshop | Manage paths

  It contains this point under manage paths:

  When using a shape or pen tool to create a work path, the new path appears as the work path in the tracks Panel. The work path is temporary; You must save it to avoid losing its contents.

  OK, the red, you mentioned is a Stoke you added. Then quick mask is not involved.

• I have a xbox controller 360 I want to use it on my pc I have a charger cable for it and I cannot make it work

  I have a gamepad xbox 360 I want to use it on my pc but I can't. I have a "xbox 360 play and charge kit" and I can't find any soft ware for help me

  Hello

  The question you posted would be better suited to the Xbox community. Check out the link and ask the question.

  http://support.Xbox.com/en-us/browse?product=Xbox-360

• I bought photoshop CS6 and now cannot make updates

  Hello, I just bought myself for the first time a new PC and round my room. I was downloading my photoshop CS6 and at the end of the download it says that error could not complete download, or something similar to that. I hit the button try again and always 'Mistake' kept popping up, but when I open the program it open no problem and everything seemed to work the way it's supposed to. But now I can not do the updates on the program. I spent so much money on the program and never had to use it yet cause of work but I hope that this problem can be an easy fix.
  Can you help me? And tell me what he could from the East went wrong and see if I need to change anything in my computer settings or anything to help solve this problem. Please and thank you

  Download and install the update manually:

  http://www.Adobe.com/support/downloads/product.jsp?product=39&platform=Windows

• PSE11 and Win8 and I cannot make transparent erasures

  Never had this problem with PSE10. But even if I unlock transparency my scratching still come out with the background color. What I'm missing here?

  Because the jpeg file format supports transparency, you should try to save as a png with transparency in PES 11 for use in powerpoint.

• Code 80070241 in Windows update and "Windows cannot verify the digital signature for this file" when you try to run any program.

  Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.

  I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »

  After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).

  The restoration went well, restarted, but the problem persists.

  Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.

  The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.

  The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.

  It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.

  On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.

  The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.

  Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.

  However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.

  ***************************************************

  Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?

  Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.

  This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.

  So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.

  Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.

  * shrug *.

  Computers.

• Re-installed XP Pro. Now can not access data dynamic disk on the HD 2

  Hey all. Good here we will...

  My system has TWO SATA drives. A year ago I converted both Dyamic discs thinking I could use them in a RAID, but decided to do it. So, since that time I am using OS + critical data Disk1 and Disk2 as a backup (compressed image of Disk1).

  My question is now, I have re-installed XP Pro on disk 1 and my computer does not allow me to see the data in Disk2. XP Pro detects disc 2 as "base" and asks me to format it. However, my BART PE bootdisk shows 2 disk as dynamic and he can't read.

  This is where I am. I'm trying to understand how to read data from disk 2. Whether some use of software 3rd party or a way to get XP Pro to see the data.

  Check the knowledge base on best practices with dynamic disks.
  http://support.Microsoft.com/search/?adv=1
  For example.
  http://support.Microsoft.com/kb/329707

  "Dynamic disks use a private disk region to maintain a logical disk manager (LDM) database, which contains the types of volumes, offsets, memberships and the drive letters of each volume. The LDM database is also replicated, so that each dynamic disk knows about every other dynamic disk configuration. This feature makes dynamic disks more reliable and recoverable than basic disks. »

  You suggest that your second drive can still have a copy of his information LDM. In other words, as long as you did not "commit a sin" as defined in this article.

  See 'import records' here and see if 'Foreign' is displayed for the drive in disk management.
  Disk management is where you want to look for info on the disc.
  http://TechNet.Microsoft.com/en-us/library/bb457110.aspx#EEAA

  Another response of the community of Windows XP newsgroups

• Try to reduce a basic volume of Windows 7 on disk 0 using the new Wizard of Simple Volume, I get a warning about the conversion to a dynamic disk.

  Just bought a new laptop with Windows 7 Home Edition and decided to shrink the C: drive and create a D: drive.  Everything seems to go correctly, and I get to the 'End of Volume Wizard' screen without problem.  All the choices seem to be OK but when I click OK I get a warning that says "the operation you selected will convert selected basic disks and dynamic disks...". "I want to do this?  If I do, what are the consequences?  If I don't want to convert a dynamic disk how create a D: drive which remains a basic disk?

  Ken Dunn
  Cleveland, OH

  Hi Ken Dunn,

  Welcome to Windows 7 Community Forums

  Basic disks and dynamic disks are of two types of hard disk configurations in Windows. Most personal computers are configured as basic disks, which are the simplest to manage. Advanced users and it professionals can make use of dynamic disks, which use multiple hard drives in a computer to manage data, usually to improve performance or reliability.

  For more information, see the link below:

  What are the basic disks and dynamic? :

  http://Windows.Microsoft.com/en-AU/Windows-Vista/what-are-basic-and-dynamic-disks

  create and format a hard disk partition:

  http://Windows.Microsoft.com/en-SG/Windows-Vista/create-and-format-a-hard-disk-partition

  I hopeYou have followed all the steps to shrink a partition correctly but, you encounter a problem, carry out the task. You can go ahead and try the following steps to reduce a volume.

  1. open the Control Panel (all items view)and click the Administrative Tools icon. then close the Control Panel window.

  2 in administrative tools, click computer management , and then close the Administrative Tools window.

  3 in the left pane under storage, click disk management.

  4 in the center pane, right-click the partition that you want to shrink and click on Decrease of Volume.

  5 type in how many MB (1 GB = 1024 MB) of space to show available reduction you want to reduce the partition or volume by to use for the new unallocated space, and then click the minimize button.

  6 the partition selected (step 4) has now shrunk to create a new empty unallocated space. You can use this new space unallocated to create a new partition with.

  7 close the computer management window.

  To create a new partition:

  1. you must first to reduce a partition or a volume create an unallocated partition to use to create the new partition or volume with.

  2. open the Control Panel (all items view)and click the Administrative Tools icon. then close the Control Panel window.

  3 in administrative tools, click computer management , and then close the Administrative Tools window.

  4 in the left pane under storage, click disk management.

  5 in the center pane, right-click on the volume or unallocated partition empty and click on New Simple Volume. (See screenshot above)

  6 click on the Next button

  7 type in how many MB (1 GB = 1024 MB) you want to use from the unallocated partition to create the new partition, and then click the Next button. (See screenshot below)

  NOTE: If you want to use all of the unallocated partition to create the new partition, and then enter all the maximum specified for the partition unallocated disk space. If you use any of the maximum disk space, you can use the left in the unallocted partition space to create another partition with.

  Select an available drive letter you want to assign to the new partition in the computer, and then click the Next button.

  9 enter a volume label name that you want for the new partition, check the perform a quick format , and click on the Next button

  Click on the Finish button

  11 the new partition or volume has been created with the space in partition assigned unallocted (step 7).

  12 close the computer management window

   

  Check if you perform the same steps as above and us post if you have any other questions.

  Hope the above information is helpful.

  Thanks and greetings

  Ucef-Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• HP recovery partition and dynamic disk!

  Just got my new laptop and added a partition of my HP pavilion dv7 WIN 7 64 bit and noticed disc was dynamic. I don't know if it changed the dynamics or as it was delivered. I'll always be able to use the recovery on the dynamic disk partition? And if I create recovery discs, they will work on the dynamic disk or will it convert back to base?

  It can work with Easus software, but I'm sure that you need to remove this extra partition before conversion back is possible.

  If you need an extra partition, look HERE page on the use of the recovery partition or delete to free up hard disk to create a new partition without conversion by burning a resumption of course the value of dynamic_after.

• Range of computers HP Pavilion 500: cannot make a recovery disk usb on my new hp desktop computer

  HI, I bought a Hp desktop computer yesterday in a store in Alberta.  Yesterday after I bought the computer told me the person in the store to do a recovery with a 32 GB USB disk.  So today, I tried several times to go to the app to create recovery disk provided with this hp desktop computer.  When the application starts it says please wait while a blue bar across a white bar.  So the next thing coming back, he says put your USB drive in and the box has a check in there to copy the recovery partition and it also says to ensure that your USB has 16 GB of storage to the partion.  Then under this window, the next wiich button is greyed or I can not click on this button.   The Cancel button witch. I can click.

  What I would like to now that's what I can do to fix this and make me a recovery drive because nobody gave me a recovery cd to go wth this computer.

  Thanks for your help is always appreciated.

  some details that might be useful:

  8.1 Windows 64-bit operating system

  Equip the USB key before you run the utility to create recovery media and try again.

  If the USB is not recognized as a removable disk, then it won't work. The fact that the next button is gray tells me that it is likely that you need to try a diferent of the flash player brand.

  There are a number of brands known not to work with the utility. Unfortunately, the most common Sandisk brand, is one of them.   Transcend flash brand work readers