dynamic domain names SEO

Similar Questions

• Anticipating the dynamic domain names

  On pages dynamic domain names has created templates start with "P1," "P2", etc., based on where the page is generated.

  How can I write my code for buttons and other scripts if I don't know in what order models will be laid?

  I create a PDF file containing several models to spawned as needed and, often, several times.

  I have fields that need to communicate with other areas on several pages, but same fields on the same page will not be able to communicate because a button using getField know that a field is called 'P4.templateName.fieldName '.

  Is it possible to have a script that runs when a page is generated, assigning the "P4" or whatever to a variable I can use in other scripts?

  Is it possible to change the dynamic fields naming convention?

  See a lesson in model for an explanation of the naming convention.

  It is possible when there is a naming convention defined that we can calculate the field names, once we get any field which follows the naming convention. You can get the name of the to a field that has focus using "event.target.name. If this field has been renamed as part of the reproduction of the page, there are 2 levels of size "P #." and "[model name]." So if you have a domain name of "Amouint" on the model named "Bill", and this template is used to generate a new page after the first page of the form with the fields name, the name of this field will be 'P1 '. Invoice.Amount ". Now usi

  NG the so-called "event.target.name" of the field, a script like:

  get the domain targeted;

  var cNameField = event.target.name;

  to get the name of the field. Now can divide the domain nirearchical in a table name using the method 'split() '. Sincet each level name is separated by a ".", using this character for the method split will create a table where each name level is an element of the array;

  So, we now have the code:

  get the domain targeted;

  var cNameField = event.target.name;

  separate the name of the field in a table;

  var aNameField = cNameField.split(".");

  the list of levels in the name field.

  Console.Show ();

  Console.Clear);

  for (var I = 0; I have< aname.length;="">

  {

  Console.println (I + ":" + aNameField [I]);

  }

  So the console should now show:

  0: P1

  1: invoice

  2: amount

  Element 0 of the table corresponds to the value "P # ' and the element 1 is the name of the model. With these values, we can calculate the name of any field renamed this layed page.

• To access dynamic domain names?

  I want to be able to create some text fields with unique names and set values in their in a loop For without having to reference the field names in the code.
  
  Consider the following code snippet:
  
  This.createTextField("hello_txt",0,10,10,100,20) ("field" + i, this.getNextHighestDepth (), x 1, y1, 250, 20);
  
  Place a text field in a clip with the name which is a composite of a literal value, and a variable value leading to names such as Field1, Field2, etc.. My question: is there any similarly use a composite field name to access field properties? For example: can I put the text for the field using the same composite name without having to speak according to a literal field name? If I can't, then what's the point of having the ability to compound name?
  
  

  You can remove the last question because the answer to the previous (s) is 'yes '.

  This ["field" + i] .text = 'whatever ';

  the support rating causes a string to be evaluated as an instance of object.

• Dynamic domain name

  I have a table with several price fields such as Lap_Price_1, Lap_Price_2, etc. where the numbered part is linked to an individual store. I need to be able to have a UPDATE query that refers to the field such as
  
  WHERE Lap_Price_1 = #Lap_Price_1 #.
  
  but where the numbered part comes from a variable. The first half of the WHERE clause is easy - Lap_Price_ #storeNumber # but I can't seem to find a way get to the equivalent of #Lap_Price_ # storeNumber #.
  
  At the release of the results of a query, I use #laps ['Lap_Price_' & storeNumber] [currentRow] # which works well and I use the same method under clauses cfif without entourage # signs.
  
  I know there is probably an easy method, but I didn't need to use a variable as part of another name of variable in this way before.
  
  Thank you
  Larry Moss

  Ah. CF5. It's different. scopes are not structures in CF5 (at least, I know that the scope of variables was not).

  You may need to use evaluate()

  #evaluate ("Lap_Price_" & storeNumber) #? not sure about that. for some time I had to use evaluate().

• Configuration remote access VPN (IPSec) using FULL domain name

  Hi friends of Cisco,

  We have the DNS (only the internal IP) within our network, right now that we have configured VPN for remote access using public IP address and connect us with the same public IP address. I need help to use the domain name FULL rather than use public IP.

  Can you please provide the configuration for this.

  Feature: ASA 5520

  Type of configuration: IPSec

  Thank you

  Estel

  Hi Philippe,.

  You can use one of the free Web of DNS dynamic sites and configure ASA to dynamic DNS.

  Reference - http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/basic_ddns.html

  HTH,

  -Dieng

• Domain name in PEAP connection

  Hi guys,.

  How can I get rid of the domain name on my WLAN beause, creating a different user name in my ACS like this:

  I already have a user name 'jong' and his authenticated via windows AD. But the problem is trying to connect to my PC using WLC, another connection is created automatically on my ACS. name of domain/username.

  Please help me how to solve this problem.

  Thank you

  Jong

  art.com/Jong

  Our ACS server does the same thing

  It is possible for the same user to have lots of different accounts dynamically mapped with GBA

  for example, a user can have

  user

  foo\user

  [email protected] / * /.

  all cards to the same AD account, everything depends on how the user types their credentials.

  I still have to find a solution to this

  It is also important when you delete the account mapped to the ACS, you remove all of the possible combinations of domain/user

  Usually I'll do a search to the ACS for

  * user *.

  This will return all accounts for this user. Then I can remove all the, change the user group and make re - map

  It is useful for me, I will record in with

  user name - who gets the mapping to a group...

  Then connect with domain\username - who gets the mapping to the same group

  Then, I can manually move the account DOMAIN\username to any group I want to

  Now, I basically 2 separate connections, both in different groups - this allows me to test my NAR and my downloadable ACL without affecting my original account username

  So it has its pros and cons - not a good solution if

• Home ASA 5520 object by domain name?

  Is it possible to configure a host in the group object by domain instead of the intellectual property or other autour work?  I want to use my dynamic dns domain name as the host that is allowed in the firewall.

  Thus, instead of

  object-group network REMOTE_USER1

  network-object host 123.45.67.89

  I'd do,

  object-group network REMOTE_USER1

  network-object host myDomain.dyndns.org

  Not on the current version unfortunately. This is a new feature that will be introduced in the upcoming major release.

• Pointing the old domain name for the domain name

  I have two domain names that I used previously (name of the other company, different domain name) pointing to my current domain name. This was done in the belief that it would be bad for SEO to let them expire, because the content of the site was essentially the same for all three areas.

  My question is should I keep renewing these two previous areas forever, or else risk the consequences in the trail of a huge fall in SEO? Or is there a period of time that I can 'wean' my current domain of these previous areas and then stand on its own? I have been using the current domain for 3 years, others back to 2008 or more.

  Surely someone out there has experienced a similar situation if non-identiques.

  If the areas are important for the company (used in the print advertising for example) I would keep the. It can also be useful for tracking what gets the most use.

  Once the actual pages that the areas initially pointed are pulled down, it is doubtful that you would see no advantage in SEO. I don't think one second that several areas simply pointing to the same set of pages might give you a better ranking for a given search term or phrase. If that were the case, then the first result for every search should be site "little blue pill" a spammer with hundreds, if not thousands of domain names pointing to it.

  Everything I've seen from Google, I guess that once their caterpillars go to re - indexing the domain redirection and the end upward in the current domain, any provision of referencing of the content of the original site, links to the current site would be lost. I could be wrong, but logically, it makes sense, since it is so plus two sets of related content pointing to each other. It's just a site with several domain names.

• Applestores.ca domain name

  Hello

  I found the applestores.ca of available domain name, so I bought it. I want to offer to Apple. Nobody knows who should I contact?

  Thank you

  You would just draw your attention to your cybersquatting, so I would not not even worth.

• Thunderbird email send option, format text, areas of HTML, "NAME DOMAIM HTML", adds domain name, domain HTML HTML: "what is it?

  "Thunderbird email send options, format text, areas of HTML, HTML DOMAIM NAME, domain name, domain HTML HTML adds:" what is it? Should I come in here as a domain sending HTML name? I have no idea.

  I can't send email. It seems that I need to configure the options of sending by sending a message. Yes? Help, please!

  Thank you. Ken [[email protected]]

  I doubt that this has nothing to do with your problem sending.

  Used as a plain text email. Some users prefer the plain text and use nothing else.

  Most users expect to be able to use the fonts, the colors, the font styles (bold, italic, underlined) and to be able to insert images and other graphic elements. To do this, you must use the HTML.

  To avoid annoying the first group, you can add to your address book and set their preference for plain text, on a whim of a base.

  If, say, in your workplace, it is planned to use signatures fantasies with pictures, or messages are required to comply with the internal rules regarding fonts or layout, then all related work email will need to use HTML. So you could add to your field of work (the part of the e-mail to the right of the symbol @) to the area of the HTML fields in the dialogue you have shown above. And you would probably add domains customers and suppliers too, since all your messages that will also be required to use your formal rules.

• I have a site designed iWed which I can't = up to date. I want to design a new Web site with a different place (everweb?) How can I get rid of the current site? I want to use the same domain name.

  I have a designed iWeb site I need to update. I know I can't use iWeb so want to design and publish a new Web site. I want to use my current domain name. How can I get rid of the existing site?

  So, you want to delete this Web site. That's right?
  If so, you can make trought accessing the website 'admin panel' or 'FTP '.

  An administration panel (or "administration panel") is a site that your host/domain provides to you, where you can change everything you want - even is for 'FTP', 'FTP' is a server where you access your Web site and change what you want, and that includes delete the current Web site.

  Questions please ask.

• Once my domain name expires will I still be able to access my old email on thunderbird

  My domain name is about to expire, I am trading is no longer. However, I may I remind the old emails for the invoices, documents, orders, info etc etc. I will be able to access once the domain has expired?

  You must first upload everything to your server
  Export a complete file will contain all of your (local) settings, address book, etc., but also your emails with attachments as long that you do not move them elsewhere. Perfect for if things go wrong.

  If it is an IMAP account please move all your emails into local folders. As we do not know if you downloaded them on your pc or just look a headers.

  If it comes from a pop account, your only worry would be if your messages are still on the server.
  Even in this case I offered them to local folders

  And you don't have to use the addon on full profile, you can export a folder and its subfolder as mboxes, i.e. the TB-format natively. It's files without extension, .msd is the directory and .msf 's index

• Fixed ip address but no domain name

  You can configure a server that is not intended to host a Web site, but only a few features such as sharing files, ftp, calendar, etc., with only a fixed IP address? If Yes, what is the simplest step by step through OS x.app for el Capitan?

  The short answer is: Yes you can! However, do not use the local point in your full domain name as it is reserved for the Hello. I would also advice against the use of the private area of dot, but rather to get and use a registered domain space. The reasoning behind it: you may change your mind later, normally sooner rather than later!

  Now for the nitty gritty: there are several excellent resources available on the net and in the App Store.

  I will quote a couple for you:

  http://krypted.com/guides/El-Capitan-Server/ by Charles Edge , who is also the author of a few very good books

  I highly recommend the three books by Reid Bondonis available on the App Store for El Capitan. They are worth every penny.

  Then there's the series of video tutorials by Todd Olthoff at http://www.toddolthoff.com/technology/ECS10.11.html

  In addition, directly from Apple, you can and should https://help.apple.com/serverapp/mac/5.1/#/apd6015d9573 for a lot of information.

  Finally, last but not least there are a multitude of resources available to Apple - Support - manuals

  HTH

  Leo

• Why is the largest part of the URL, with the exception of the domain name, in cast iron? It is difficult to read. I would like to make the entire address in black police

  Screenshot of the behavior

  Before that I've upgraded to Firefox 6.0, the URL was displayed in black text.

  After the upgrade, it is now showing only the main domain name ( mozilla.com, for example) in the text in black, so that any additional text (like, https://support.) is grayed out.

  It is very difficult to read this gray text on my monitor. I would like to make sure the full address is displayed in black text, but I couldn't find any type of configuration setting under Options to change that.

  Please let me know if I can change the display of the URLS back to black.

  This is a new feature in Firefox to highlight the domain in the URL bar. You can change a preference to do the full URL darkness.

  Change a preference:

  1. type of topic: config in the location/URL bar and press ENTER.
  2. If you see a warning, accept (promise to be careful)
  3. Filter: browser.urlbar.formatting.enabled
  4. in the lower panel, double click on this item to toggle the value false

  I don't know if yes or no you must restart Firefox after doing the above to have the change take effect. Test, and if it does not, then restart Firefox and test again.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• domain name in the address bar opens another Web site

  When you enter my domain name without .com, it opens another Web site with a similar name.

  This has happened

  Each time Firefox opened

  Firefox can do a lucky Google search.
  See http://kb.mozillazine.org/Location_Bar_search and http://kb.mozillazine.org/Keyword.URL

  You can check the pref keyword ~ 46 ~ URL on the topic: config page.
  You can open the topic: config page through the address bar, you open a web site.