Dynamic links is not link

Similar Questions

• error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

  I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

  These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

  • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
  • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  where the name of the Program Files folder may vary depending on the region.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  BlindingFog said

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.

• the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic link library nssutil3.dll

  Windows XP with Firefox 18.0.1 does not open when upgraded to the latest version.
  Error messages have been
  (1) the procedure entry that point pr_setcurrentthreadname could not be located in the dynamic library (2) ndpr4.dll the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic links (3) library nssutil3.dll was not able to load XPCOM

  A ran malware & anti-virus software then deleted Firefox via Control Panel, then residual file file C:\Documents & Folders\ApplicationData\Mozilla Director and program folder.
  Local & installed products ndpr4.dl and nssutil3.dll - fresh reinstall firefox several times - he got rid of the error message 1 but not 2 or 3 always cannot open Firefox.
  All solutions?

  I have this problem and I use Zone Alarm Extreme Security with Force active field. I found that by turning off the virtual Cache in Zone Alarm that this problem has disappeared and has been able to restart firefox.

  Here is a post I found that addresses the issue in some way. http://KB.mozillazine.org/Browser_will_not_start_up#Firefox_does_not_start_after_updating_with_ZoneAlarm_ForceField_enabled

• get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  Hello

  You can try to install the latest version on the current: https://www.mozilla.org/en-US/firefox/new/

• After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  Do a clean reinstall.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• When I start firefox browser display a erroe message containing the text "point_except_handler4_common of procedure not found entry into the dynamic link library msvcrt.dll" I use windows XP

  when I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP  in English
  

  This has happened

  Each time Firefox opened

  Is start mozila firefox

  This problem may be caused by a problem with the file c:\windows\system32\dwmapi.dll
  The dwmapi.dll file is a Vista file and must be present in Windows XP.

  See also [tiki - view_forum_thread.php? idforum = 1 & comments_parentId = 417674]

• I_RpcBindingIsServerLocal is not found in the RPCRT4.dll dynamic link library

  Windows 2003 64-bit, the server crashed after installation of windows update and keep restarting with blue screen stating 'Procedure entry point not found I_RpcBindingIsServerLocal in the RPCRT4.dll dynamic link library' there is no way to access Windows in safe mode or in any other way tried to use last know good configuration, safe mode. The only way is to access Windows Recovery Console in which we tried to repair and run the chkdisk but unfror. with no luck.

  How can we overcome this problem without upgrading them to 2008!

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• The 459 ordinal could not be located in the dynamic link library urlmon.dll

  Hi all

  The 459 ordinal not found in the urlmon.dll library of dynamic links when opening Infopath form in Window Server 2003. How to solve this problem.

  Thanks in advance

  Diomande

  Hi dinia,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.

  McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.
  Please tell us how to solve this error message. It does not seem to affect processes, just an annoying message that will not disappear. Help, please

  [Moved from comments]

  Hey Carol,.

  It would help if you could answer these questions.

  -What version of Windows is installed on the computer?
  -What antivirus software do you have on the computer?
  -When you get this error? It is when the computer starts for the first time?

  Here are a few troubleshooting steps that you can try to get the matter sorted.

  First of all, if you have Mcafee AntiVirus installed on the computer, turn it off for awhile and see if the error. McUICnt.exe is a file that is

  used by Mcafee and could be the reason for the error.
  Note: Antivirus should be reactivated when you have completed troubleshooting. Computer with antivirus off is: exposed to the virus.

  If Mcafee is not the cause, then try to do a scan complete antivirus on the computer in safe mode with networking using the Microsoft Safety Scanner

  Make sure that the computer is virus-free.

  Safe mode with networking: http://windows.microsoft.com/en-in/windows7/start-your-computer-in-safe-mode

  Note: the steps mentioned in the link applies to Windows vista and Windows 7.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Let us know the results.

• The original 5360 could not be located in the dynamic link library xlive.dll.

  I just bought fallout 3 for my computer windows 7 and worked until I tried to open it and it came with "the Ordinal not found 5360 in the dynamic link library xlive.dll. I was told to go download a client for the patch, but it indicates that the service is currently univalable

  Hello

  I had the same problem.

  Download http://go.microsoft.com/fwlink/?LinkId=128962

  It can fix

• the procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  Hello

  While trying to install a program, I see the following on the screen error message:

  The procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  The I set him, is a Windows XP 32-bit environment.

  The I am installing, is a program, created by my own company, using a 32-bit self-extracting installer, which is also created by my own business using InstallAnywhere Flexera software.

  No changes were made on the environment of the installers.

  No change seems is done on the environment for creating installation programs (where the self-extracting installer is created): I checked the monitor of reliability/Action Center / Control Panel and no entries are present between a job and an installer without work.

  The file 'KERNEL32.dll' is mentioned in the error message, I checked his date of change, which is 11/30/2012, this should not be the cause of the problem either.

  Witnin the self-extracting installation program, a few changes were found, those who are considered at the moment, but there is no indication or not those who are causing the error message I see here.

  Does anyone have an idea what may cause the error message mentioned and how to cope?

  Thank you

  Dominique

  These types of error messages mean that the program is looking "inside" the file specified (in this case kernel32.dll) try to find a function/procedure to run called "GetFinalPathNameByHandleW" and find do not.

  The program calls the non-existent function badly or the library file is not in there.  Things do not match somewhere.

  A DLL is a library of dynamic links and files as kernel32.dll are sometimes just a bunch of procedures/functions/subroutines and all located in a single, portable file.

  In a primitive way, you can use a text editor to open the kernel32.dll file (make a copy if it your desire) and search for a string "GetFinalPathNameByHandleW" and you will not find.

  You can even search for "GetFinal", and you won't find it in the XP kernel32.dll file:

  

  But if you do the same thing on a Windows 7 + kernel32.dll you 'll find:

  

  If your program calls a function inside a DLL, but this feature does not exist in the Windows XP's kernel32.dll file.

  I think that GetFinalPathNameByHandleW was introduced in Windows Vista, so now here you would be fine.

  If who wrote your program is that it works on XP, they need to stick to the functions that are part of XP and GetFinalPathNameByHandleW isn't here, where the error.

• Ordinal 423 could not be located in the dynamic link library urlmon.dll

  After the download of Internet Explorer 8 and computer restart, I get the error message that the ordinal 423 could not be located in the dynamic link library urlmon.dll. I have nothing, no start menu, icons whatever it is. even when you start in safe mode. Please help me solve this problem

  Thank you

  After the download of Internet Explorer 8 and computer restart, I get the error message that the ordinal 423 could not be located in the dynamic link library urlmon.dll. I have nothing, no start menu, icons whatever it is. even when you start in safe mode. Please help me solve this problem

  Thank you

  You can either try the system restore before installing corrupt of IE8 has taken place or you can try to copy / to register theurlmon.dll in doing so:

  Click the Windows key + R key on your keyboard to open the command run and type:

  regsvr32 urlmon.dll click [Ok ] or press [Enter ] on your keyboard. Reboot and see if you can see the desktop.

  If you have still questions try clicking on the Windows of your keyboard key and open the start menu, click onall programs > Accessories > system tools > System Restore.

  How to reinstall or repair Internet Explorer in Windows Vista and Windows XP
  http://support.Microsoft.com/kb/318378/

  How to uninstall or remove Internet Explorer 8?
  http://support.Microsoft.com/kb/957700/en-us

  How to solve Internet Explorer 8 installation problems
  http://support.Microsoft.com/kb/949220/en-us
  How to solve Internet Explorer 8 installation problems
  http://support.Microsoft.com/kb/949220/en-us

  How to install Internet Explorer 8
  http://support.Microsoft.com/kb/970310/en-us

  Let us know your progress or if you need more help.

  NASS - http://www.nasstec.co.uk

• 'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

  ORIGINAL TITLE: How can I fix this please?

  I have an older version of Windows XP (Home edition) Version 5.1.  Trying to get updated with service packs, etc., I get the pop up message in the box below.  How can I fix the problem?

  'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

  Thank you for your help.

  The other post:

  We get an error "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" so he was trying to use internet explore.

  In Firefox, I have automatic updates verified, but for some reason any I do not receive them.  I need all the service packs for Microsoft.

  When I try to use Internet Explorer to connect to the internet, I get a message that says "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" How can I fix?  I get a lot of error messages related to the KERNEL32.dll dynamic link library.

  In addition, for some unknown reason, I lost my software of Microsoft - Word, Excel, etc.  I don't have the disc to recharge.

  Thanks for any help.  This kind of thing is frustrating and I really appreciate the availability of Microsoft Answers for assistance.

  Additional post:

  Im trying to update my computer with SP2 and Windows 7.  Even when I try to use I Tunes and do other things that I receive and message entry point (they vary).

  Here are a couple:
  1. the procedure for DecodePointer entry point could not be located in the line of the dynamic library KERNEL32.dll.

  2. the procedure entry point SHRRegGetValueW be found in the library of dynamic links SHLWAPI.dll.

  I have an old computer. Compaq Windows XP - Home Edition, 5.1.

  A month ago I lost my Microsoft Office software. Word and excel... it was all gone.   I have to reload the diskettes of origin provided with this computer which is about 7 years old.

  Is this thing?  I CAN go on the internet and move OK, but I can't download updates, or I Tunes or much else.

  * Original title: do not get the automatic updates.

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Tom Ferguson

• SHRegGetValueQ location in the library of dynamic links SHLWAPI.dll could not

  Ok. I have computer I reformat. It has Windows Home XP with SP1a with IE6. I reformatted the computer with a problem until I had to download IE8. When installing IE8 I get error "located at the entrance of procedure point SHRegGetValueQ could not in the library of dynamic links SHLWAPI.dll. I can't install SP2 or install the windows update until I have IE8. I reformatted it twice, thought that maybe I did something wrong. I look for this community without anything working. I reformatted it once before a few years back and had no problems. If you have a ssolutionto this problem please let me know without all this extra *. Just give what I need

  Happy that you guessed it work.  Thanks for the comments.

  -JW

• "450 ordinal is not found in the dynamic link library urlmonn.dll" or something. What does that mean?

  I downloaded and installed the windows 7 transformation pack and then when I removed it a few months later he repeated this message whenever I started a program.

  . DLL or Dynamic Link Library files are collections of routines or function that are accessible and used by one or more programs as needed. The Ordinal Point is an entry point or address where a program can expect to find a specific routine or function. Different versions of a. DLL can have different collections of routines that is held inside and as such, addresses can vary.

  It would seem that the "transformation pack" has another (e.g. updated...?) version of the urlmon.dll file and 'remove' the transformation pack made the remaniing version on your XP with problems.

  You could try the reinstatement of the existing urlmon.dll. Tap on the Windows key + R or click on Start, run - paste or type in the following in the text Open run dialog box.

  regsvr32 urlmon.dll

  ... and click OK. If this does not resolve your problem, you can also try a full System File Check. Tap on the Windows key + R or click on Start, run - paste or type in the following in the text Open run dialog box.

  cmd

  ... and click OK. At the opening of the command window, type the following,

  sfc/scannow

  ..., and then tap on . The process will take a few minutes depending on the speed of your computer. This process' Scans integrity of system protected all files and repairs files with problems when possible ".

  Please note that you mentioned a urlmonn.dll. I'm not familiar with this specific. DLL and have provided guidance for the reinstatement of the urlmon.dll instead. If the stray file is indeed urlmonn.dll please adjust the instructions accordingly.