Dynamic load Message selection (Clause Where) in the application process!

Similar Questions

• When I try to run Age Of Empires with the CD in, I get a message "Please insert the right CD-ROM, select OK and restart the application.

  Former title: Trouble running games CD, post installation under Vista. That is to say 2 AoE, Warrior kings.

  I have vista on my laptop, I installed games like shogun and medieval total war and they both work perfectly, I tried to put it on the age empires and warrior kings: battles who are also on a cd format, I installed the last but they usually run after that. Although the instialltion is over, I get asked if I wanted to leave the program to run as administrator. : s

  DVD/CD drive recognize there is a disc, but does not work automatically. I can't install the program normally when I run the setup.exe for the game. When I try to run the program with the CD in, I get a message "Please insert the right CD-ROM, select OK and restart the application.

  I tried to run them in compatibility mode, using all variants. and also I tried soome of advice from the help article about the disk drivers. game discs are clean and one striped.

  Why can I install the program and access the drive to use the files it contains, but then not use the disk?

  Hello
   
  
  This problem may occur if one of the following conditions is true:
  a. you do not use the game disc to start the program.
  b. the CD player is not compatible with the program.
  c. using a copy of the program CD.
  d. you are not connected to the computer as an administrator.
  e. the programs interfere with the start of the game which is running but is invisible to you.
  f. the CD-ROM drive uses out-of-date drivers.
   
   
  I would ask you to try the methods listed in the article below:
  Error message or the game stops responding on the "Loading" screen when you start a Microsoft game: "insert the right CD.
  http://support.Microsoft.com/kb/228985/en-us
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After selecting an area and the application of fill, where the "done" or "Tick" to remove the moving dotted line?

  After selecting an area and the application of fill, where the "done" or "Tick" to remove the moving dotted line?

  Cmd - H show/hide extras, deselects cmd - D.

• Hi need help I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Hi, I need help, I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Follow the procedure below and check:

  
  

  End Adobe partner all tasks in the Manager of tasks like creative cloud, CoreSync, AAMUpdater... etc.
  

  Uninstall Adobe Creative Cloud application.

  If you face any problem try CC Uninstaller:

  Using creative cloud | Uninstall the creative cloud desktop application

  After removing Adobe Creative Cloud applications, follow these steps:

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Impossible to remove?

  Rename it as Adobe Creative Cloud-old.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  
  

  Step 4:

  Temporarily disable anti-virus and firewall.

  
  

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "Automatically detect settings" is the only option you select, the window of properties of LAN so clear.

  
  

  Step 5:

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

  Then, download and install the Adobe Creative Cloud app and check.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

• In the Muse is it normal to get this message? "Do you think the application 'Adobe Muse CC 2014.app' to accept incoming network connections?

  In the Muse is it normal to get this message? "Do you think the application 'Adobe Muse CC 2014.app' to accept incoming network connections? Clicking Deny can limit the behavior of the application. This setting can be changed in the Firewall pane of security and privacy preferences. "I do not have it and I use most of the Adobe products. I've updated Muse yesterday. Thank you!

  Hi Kay,

  This warning is not come muse. It must come from your firewall or anti-virus software. In my view, that muse added to the firewall exceptions list should solve the problem.

  Kind regards

  Aish

• How to set the value of the point of application using pl/sql in the application process

  Hi guys,.

  I want a global variable (application point) whose value will be set to start when a user logs on to the application. The value will be retrieved from the database by using a sql query. I don't exactly know the syntax to set the value of the point of application in the application process. Also, I want to know what type of enforcement process should I use to set the value of the point of application, when a user starts a session. The value of the point of application varies from one user to the user.

  Help, please.

  I use apex 4.2

  Kind regards

  Waqas

  You can use the application element as a link with his name. That is to say. your point of application is named G_MY_APPLICATION_ITEM, then you can / set of access using: G_MY_APPLICATION_ITEM.

  For example

  BEGIN

  -assign as a variable

  : G_MY_APPLICATION_ITEM: = 'LARRY ';

  --

  -use in a SQL statement

  SELECT WHATEVER_COLUMN

  IN: G_MY_APPLICATION_ITEM

  FROM MY_TABLE

  WHERE USERNAME =: APP_USER

  ;

  END;

  Peter

• Error: Failed to create the application process: operation not permitted - deployment of ripple to Dev Alpha

  Hey people,

  I was puzzled on this the last bit of time and can't seem to find a solution. (The closest thing I could find is here: http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/Webapp-not-starting-on-device-VM... but there does appear to be a response [UPDATE: Adam Stanley mentioned that it was due to a missing Debug token, and this isn't the case for me.])

  When I try to "Package & launch" of the ripple, the project is created correctly and even installs the application on the device (is the application icon on the home screen). However, when he tries to run the application, the console of the ripple spit:

  "Error: cannot create the application process: operation not permitted".

  Any later attempt to open the application from the icon on the screen will result in an immediate fall.

  As an attempt to circumvent, I use "Package & sign" and then run the blackberry-deploy with installApp - launchApp - tool options and... it generates the same error as described above.

  I'm working on OS X, and I successfully installed the Webworks SDK as well as the undulation on Chrome Plugin. I have a project together upward with a running python web server and can view the content properly on the ripple. I have my signature correctly registered keys and I generated the file debugtoken.bar. I downloaded the debugtoken on the alpha dev successfully device and placed a copy of the debugtoken.bar file in the root folder of the SDK Webworks. The unit is in developer mode.

  Someone at-troubleshooting suggestions?

  [Edited for format (original post deleted line breaks) and also to highlight a number of things]

  So after getting back to the question, I loaded build with the SDK 1675 Webworks (1.0.4.5) published today, and I was able to go beyond the permission error that plagued me previously.

  Thanks again for the help Adam.

• 4.2 DOC BUG: all about the application process

  "There is an error in Oracle Application Express Application Builder User Guide version 4.2 §8.8.1 " "on the implementation of the application process":

  A process On Demand is a special type of procedure of demand that has a Point of On Demand process and executes when it is called from a process On demand page level or a browser AJAX call. On-demand processes are useful when you have logic of PL/SQL that you want to run different execution points on several pages.

  At the request of the process generally must be created on a page and not at the level of the application. On request, process created at the application level are created with an initial authorization scheme of must not be Public user. This prohibits the process invoked with users in authenticated sessions.

  As it is perfectly possible (and desirable) at the request of the application process to be invoked, [that] by authenticated users, this should probably read:

  A process On Demand is a special type of procedure of demand that has a Point of On Demand process and executes when it is called from a process On demand page level or a browser AJAX call. On-demand processes are useful when you have logic of PL/SQL that you want to run different execution points on several pages.

  At the request of the process generally must be created on a page and not at the level of the application. On request, process created at the application level are created with an initial authorization scheme of must not be Public user. This forbidden process be invoked from users not authenticated sessions.

  In addition, the second paragraph is a new addition to the documentation for APEX 4.2. What is the reasoning for not creating processes on request at the application level? I've used them for a few years as a way to provide reusable, application- wide (for example, the file downloads and the AJAX content) only items authenticated Apex sessions.

  Hello

  Thanks again. I added a note to the 5.0 docs.

  It is certainly very good create processes at the level of applications On Demand. However, if a process is tied to a single page, only, it is immediately obvious that the process belongs to the interface of this page. It's good from a maintenance point of view, because if you only use application-level processes, it may be more difficult to determine if the process is still in use and where it is called from.

  Kind regards

  Christian

• Sending page apex to the application process (JSON) values

  Hi all
  
  A page 5 apex has a value in a hidden item, P5_CLASS
  In the apex 5 page, I wrote a JavaScript to call for a process of application (PL/SQL) to retrieve the values of a table on Page 5.
  var ajaxRequest = new htmldb_Get (null, & APP_ID., 'APPLICATION_PROCESS is Get_Class_Data', 0);
  and I use the JSON object to display the rows in the table.
  -----------
  Problem
  -----------
  It works pretty well. But I need to send the value of the hidden element P5_CLASS to Get_Class_Data so that I can ask P5_CLASS-basedapplication process.
  
  Help, please.

  Shiva says:
  Thank you Paul,.

  So I can use

  var ajaxRequest = new htmldb_Get (null, & APP_ID, 'APPLICATION_PROCESS = GET_CLASS_DATA', 0);
  ajaxRequest.add ('F15_GLOBALVAR', $v ("#P5_CLASS")) to send the value to the application process?

  (F15_GLOBALVAR is an application-level element, I created in the shared components)

  And to use this application in my sql in GET_CLASS_DATA, I can use sql... where class =: F15_GLOBALVAR?

  Yes.

  (Please zip code wrapped in \

  ...\
  

  Tags to preserve the special characters and formatting.)

• Question of the application process

  +(First OFF, we're using ApEx 4.0 through IE8) +.
  I have a report that serves as a "shopping bag" of sorts, with a "Delete" button to cancel the Articles of him. But the button 'Delete' is not to go to the page, it leaves just a blank white page. (Fortunately, the process works in the removal of the element)
  
  The link to the column in the report Page 11 goes back to Page 11. (I tried to change to a new Page 12, including a few branches immediately back to the 11 Page, but it does not solve the problem) The link name is APPLICATION_PROCESS = REMOVECART, clears the cache on Page 11 and sets the value of a hidden element (P11_ITEMCODE) to be referenced in the App.Process.
  The REMOVECART process is a SQL/PL block running On-Demand"that says:
  
  DELETE FROM INFO_CART WHERE ITEMCODE =: P11_ITEMCODE;
  UPDATE the STATUS value INFO_INDEX = 'In', ORDEREDBYUSERID = '0' where ITEMCODE =: P11_ITEMCODE;
  
  There is no Conditions, permissions or authentication on the process or the link in the column. Ideas, why the process is not back to the Page based on its execution?

  It appears when you run the application process of the URL which deal with the application will run and that's it. You will need to provide a code in the process of redirection request to the url of the page you want to go.

  Another option is to create a process to run the application process and make it conditional to a certain request value that you can set in your link. Look at the page 4 ("basket 2") for an example.

• Redirection of the application process

  Hello

  When we try to redirect using the application process get below error.

  When the same process is tried to process Page it works fine.

  We use 5 APEX. Tried owa_util.reirect_url and apex_util.redirect_url.

  Any ideas?

  

  Hi Arun,

  Why don't you use a branch?

  If you cannot you must always use apex_util.redirect_url. Can you provide an example of code you used? As it seems that the browser actually receives the redirection, but it seems that it is not correct. Use the function "Check system" and tab Net of Firefox to have a look at the answer and after that is returned by the server.

  Concerning

  Patrick

• To access the settings of ajax in the application process

  Hello

  I have an ajax call, submitting a parameter called cBoxKey.

     var get = new
     htmldb_Get(null,$v('pFlowId').value,'APPLICATION_PROCESS=TrackRows',0);
     get.add('cBoxKey','NOTREQUIRED');
    get.get();
  
  

  In the application process I can access the parameter 'cBoxKey' like below;

  declare
      l_checkBoxKey  varchar2(4000);  
  begin
      --
      -- Get the value of the global which will be set in JavaScript
      --
      l_checkBoxKey := wwv_flow.g_cBoxKey;
  
  

  However, this does not seem to work because when I replace

  l_checkBoxKey := wwv_flow.g_cBoxKey;
  
  

  with

  l_checkBoxKey := 'NOTREQUIRED';
  
  

  The application process is called and produces results (through the ajax call).

  In my view, that the question is how access the "cBoxKey" parameter in the application process.

  Any ideas on what could be wrong.

  Thank you.

  Hello

  I check any specification of package APEX version wwv_flow, there is no variable of g_cBoxKey.

  If you have idea there?

  Change your JavaScript for

  var get = new
  htmldb_Get(null,$v('pFlowId').value,'APPLICATION_PROCESS=TrackRows',0);
  get.addParam('x01','NOTREQUIRED');
  get.get();
  

  And then access process on demand as

  l_checkBoxKey := APEX_APPLICATION.g_x01;
  

  Kind regards
  Jari

• adding additional drives in the application process

  Hi, how it is possible to add additional disks in the application process? Now, go in the settings of the virtual machine in vCenter client to add disks after the virtual machine has been created in LCM. We take for the applicant specify how many additional disks and what size (just not RDM VMDK)

  Thank you

  It can get quite complicated because this is certainly not the standard features of LCM and would not be supported by VMware if this customization is not performed by the team of the Orchestration Services of our Professional Services organization... However, that being said, a general approach would be as follows:

  • Duplicate the workflow application for Virtual Machine to the category of workflow custom under user and give a custom name like ask VM

  • Add new entries to the custom workflow that are something like: additionalDiskCount (number) and additionalDiskSize (number) (which implies that all the additional disks would be the same size)

  • Update the workflow to store these values by using a standard LCM Action such as:

  System.getModule("com.vmware.lcm").addDataToTokenKeyAsString (provisioningToken, additionalDiskCount, "additionalDiskCount");

  System.getModule("com.vmware.lcm").addDataToTokenKeyAsString (provisioningToken, additionalDiskSize, "additionalDiskSize");

  The two lines above will store the specified user to other values that the token of data in the database of LCM and you will be able to get it back later because it is related to this particular request token.

  • Hide the initial request button of the tab requests and create a new button that points to your custom workflow

  • Create a new workflow that takes an object of lcm:ProvisioningToken as an entry called "token".

  • Inside of this workflow (let's call it 'Add disks to ask'), you will need to retrieve the additionalDiskCount and additionalDiskSize values that have been stored with the token:

  additionalDiskCount = System.getModule("com.vmware.lcm").getDataFromTokenKeyAsString (token, "additionalDiskCount");

  additionalDiskSize = System.getModule("com.vmware.lcm").getDataFromTokenKeyAsString (token, "additionalDiskSize");

  • You then get the object of VMware3:VirtualMachine of your token:

  VM = System.getModule("com.vmware.lcm.vim3").getVmFromToken (token);

  • Then, using those extracted values and the virtual computer object, use a loop to pass these parameters and some other default values you want in the workflow 'Add drive' (it's in the category library/VIM 3/Virtual Machine management/Device Management workflow.)

  • Once you have confirmed that this new workflow 'Add disks to ask' is working properly by passing only an object token with these entries of additional data stored with them, you can add this workflow for the reminder 'onCreate '.

  The above process is a general approach that could be taken. The specifics of real workflows that you create are up to you and the support of this customization

  Good luck!

  Visit me on http://www.vcoteam.info for vCenter Orchestrator tips and tutorials

• Show/hide a Div so that the application process will be executed

  Hi all
  
  I have the following problem:
  I'm on APEX 3 and I have the page with 2 elements. When the user, enter the value in the first element on the page and navigate out of the element, in the second article should be the SYSDATE.
  This must be done as:
  1. set the fovus in the Item1.
  2. navigate off the Item1 (with TAB or the mouse).
  3 JavaScript function will be executed:
  3.1 icon "Please wait...". "will be displayed.
  3.2 application of getDbDate process will be executed.
  3.3 the value returned by the getDbDate of application process is allowed in the Field2.
  3.4 icon "Please wait...". "disappears.
  
  Here ist the sample application: http://apex.oracle.com/pls/otn/f?p=MISCELLANEOUS:108
  
  In Firefox, I have no problems to show the "Please wait...". "Icon, but the Explorer Intener shows me nothing. But the application process will be executed.
  
  Any ideas?
  
  Best regards

  Hello

  See the example of CARL
  http://HTMLDB.Oracle.com/pls/OTN/f?p=11933:62

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• How to make a visible object in the application process?

  Hello
  
  I have a resource that is self down and the shape of the object have a few specified additional fields (the fields are marked as required and are made in research). I want to allow (or even force) user to complete a form during the application process. How to do this? Is is possible?
  In fact, the user cannot see the form requesting a resource, it can be seen and filled by approver or administrator...
  
  Thanks in advance!

  Hi Magnan,

  If your resources form is not available, consider the following configurations:

  -Make sure that the form is active.
  -For the definition of the record resource, ensure that you have set the form as the object Type and define the purpose of your resource in the object name field.
  -For the definition of the resource object, make sure the resource card is defined in the name of the Table field.

  That's all you need to do to have the shape of resources when the user creates a request

  Renato.