Show/hide a Div so that the application process will be executed

Similar Questions

• Used my copy of OSX MAvericks in the past, but now I get an error message that the application cannot be verified and go to the App Store. I did, but there is nothing to install OSX Mavericks download?

  Used my copy of OSX MAvericks in the past, but now I get an error message that the application cannot be verified and go to the App Store. I did, but there is nothing to install OSX Mavericks download?

  Log in to the App Store and look under the purchases tab.

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• How to check the platform below, that the application will work over time?

  Hi all

  Is there a way that the application can check the app was supposed to work on what operating system. Say if I use an OS 5 and then the app was built for the 4.5 OS, so I need to check whether the application is a version 4.5 and inform the user and halt execution. I can change the appname or version number to detect but y at - it another way to do it programmatically.

  guys sorry for the stupid question. I had some caffeine. and resolved immediately. I used the preprocessors.

  Thanks for the help guys. I understand your desire to help me. Thank you

• My phone connect to the Manager of HTC, phone says: "Unable to open HTC Sync Manager on your computer. Check that the application is installed and open. "

  I have the HTC Droid Incredible 4 G LTE and whenever I try to connect it to the Manager of HTC, it does not work. My phone says: "Unable to open HTC Sync Manager on your computer. Check that the application is installed and open. " The Manager is open on my laptop and I just re downloaded yesterday. The Manager is currently up-to-date, but my phone does not always connect.

  According to HTC, the HTC Droid Incredible 4 G LTE is not compatible with HTC Sync Manager even if HTC Droid Incredible 4 G is.  There are forums from HTC that would give advice.

  You will have to remove it then use HTC Sync instead.  Download & its installation instructions are on this page HTC.

  - - - - - - - - - -

  [Published July 30, 2016 - everything that follows is true, but the version I'll keep up-to-date is to http://answers.microsoft.com/message/cf1ae8dd-d5fd-4524-90f5-5ee0c7a7a334]

  My HTC Desire X can use HTC Sync Manager, but I have tried both and neither of them is very useful software.  Two of them, for example, to synchronize favorites of IE in a simple list in a single folder [that is, they lose the folder structure that you can use in favorites of IE in order to manage the potentially large number of items you have in there].

  Good third-party synchronization - MyPhoneExplorer, BookmarkSB & MeercelRSSDemon software

  If you install HTC Sync, you will find useful drivers because they allow you to use a third-party synchronization software like MyPhoneExplorer.  MPE allows synchronization directly via a USB connection if you do not use to the top of your phone data allocation synchronization with your own data [you can also synchronize using WiFi Hotspot from your phone or a WiFi network].  I used the MEP with both Android 4.0 and 4.1.  You can also see their section English Forum for the guide very useful to establish things.  If you install GPP, while the phone is connected, then the necessary MPE 'client' should automatically install on the phone as well - otherwise go to MyPhoneExplorer Client - applications Android on Google game to get the customer.

  Synchronization of MS Office - Outlook 2007

  MPE can synchronize Outlook calendar, Contacts, Notes and tasks.

  Sync IE Favorites

  If you try to synchronize include Favorites of IE [Favorites] so that you can use the MPE to synchronize your exported favorites of IE list [I can explain if you want] on the phone and then use BookmarkSB to import your IE favorites through the Android default browser [, then, if necessary, Chrome can import them into him there].

  Synchronization of IE RSS Feeds

  I export my IE FLOW RSS to opml file, and then synchronize this file to the phone & import it into Demon RSS de Meercel.  It's heavy, but I do not add flow additional RSS very often is not too heavy.

  Other synchronization files

  I use the MPE for all my synchronization, including Music & Office-type files [I don't know if your phone comes with MS Office-equivalent application].  You'll want to look at the files, settings, MPE, MultiSync.  If you have a specific example of synchronization you want then post it here & I'll try to explain the parameters useful for her.

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• Check that the application is signed by a valid certificate

  Hello

  How to:

  Check that the application is signed by a valid certificate?

  
  

  Thank you.
  

  Take a look at this article: what should I do when I see a security invites since Java? (Information Blue Shield)

• How to warn the user that the application is about to disconnect automatically?

  If a user leaves his workstation unattended for a certain period of time, the Apex application disconnects automatically from the server.  The user is not warned about this and if they attempt to save some data on the current page, they don't realize that their data was not recorded until they click on the "Save" button.  At this point, the values of page element empty out and they realize that their data has not been saved.  It is the current page allows many lines to affix and the user can waste a lot of time entering data which will fall into the compartment bits.

  Is it possible to make my Apex application notify the user that the application has been automatically disconnected?

  Better yet, the user can be notified that the app is about to disconnect and the opportunity to extend their session?

  Thank you!

  Kim

  What APEX version do you use?

  The following link, Although unsupported by Oracle, contains a plug-in (I used) for the expiration times of session allowing notifications customized (about to cut etc..).

  http://www.apex-plugin.com/Oracle-Apex-plugins/dynamic-action-plugin/skillbuilders-session-timeout_188.html

  Keep in mind, it's good for APEX 4.0...

• The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  
  

  Hi Marcelo,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• On my new Mac Pro, I can not install adobe creative cloud app.  Adobe told me every time that the application has been damaged.

  I can't install adobe creative cloud app on my new Mac Pro desktop.

  When I download the app and try to install it, adobe says that the application has been damaged, then starts all over again.

  What can I do to fix this?

  joke

  Try to perform the steps mentioned on link below

  "Failed to install" error Creative Cloud Desktop application

• I just bought a new iMac and used the Migration Assistant to transfer my files. At first everything worked, but now a week later, I get the message that the application manager is missing, and I can't Photoshop and InDesign to start. I don't want t

  I just bought a new iMac and used the Migration Assistant to transfer my files. At first everything worked, but now a week later, I get the message that the application manager is missing, and I can't Photoshop and InDesign to start. For my personal use, I don't have a need to reach creative Cloud. You have any suggestions for a workaround?

  Try installing Adobe application Manager down the link and check

  Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager: thank you

• We want to confirm that the application will be compatible daylight saving

  We want to confirm that the application will be compatible when changing economies in light of day on April 1st where time restores from 03:00 to 02:00
  confirm that we have sets compatible patch for Australian Eastern Standard Time for advanced savings permutation on April 1, 2012
  
  running ebusiness 11.5.10
  
  Published by: jemar98 on February 24, 2012 12:19

  jemar98 wrote:
  We want to confirm that the application will be compatible when changing economies in light of day on April 1st where time restores from 03:00 to 02:00
  confirm that we have sets compatible patch for Australian Eastern Standard Time for advanced savings permutation on April 1, 2012

  running ebusiness 11.5.10

  Please see these documents.

  Comply with the daylight saving time (DST) and rule changes of zone in E-Business Suite 11i [ID 458452.1]
  Diagnosis of problem of the DST with e-Business Suite 11i and Release 12 [800420.1 ID]

  Thank you
  Hussein

• How can I reinstall Acrobat if Application Manager indicates that the application is updated, but is absent?

  I uninstalled Acrobat 11 using the uninstall program, and now I can't reinstall because the Application handler specifies that the application is actually updated. The application went from my hard drive and all files of application support disappeared as well. How is - this application manager is considering the application is still installed? Is there a way I can download without the application manager?

  Hello

  I was able to run this: http://www.adobe.com/support/contact/cscleanertool.html

  Needed to ensure that 'ALL' has been selected in the menu drop-down to make sure that Acrobat has shown in the list. Removed and managed to install.

• adding additional drives in the application process

  Hi, how it is possible to add additional disks in the application process? Now, go in the settings of the virtual machine in vCenter client to add disks after the virtual machine has been created in LCM. We take for the applicant specify how many additional disks and what size (just not RDM VMDK)

  Thank you

  It can get quite complicated because this is certainly not the standard features of LCM and would not be supported by VMware if this customization is not performed by the team of the Orchestration Services of our Professional Services organization... However, that being said, a general approach would be as follows:

  • Duplicate the workflow application for Virtual Machine to the category of workflow custom under user and give a custom name like ask VM

  • Add new entries to the custom workflow that are something like: additionalDiskCount (number) and additionalDiskSize (number) (which implies that all the additional disks would be the same size)

  • Update the workflow to store these values by using a standard LCM Action such as:

  System.getModule("com.vmware.lcm").addDataToTokenKeyAsString (provisioningToken, additionalDiskCount, "additionalDiskCount");

  System.getModule("com.vmware.lcm").addDataToTokenKeyAsString (provisioningToken, additionalDiskSize, "additionalDiskSize");

  The two lines above will store the specified user to other values that the token of data in the database of LCM and you will be able to get it back later because it is related to this particular request token.

  • Hide the initial request button of the tab requests and create a new button that points to your custom workflow

  • Create a new workflow that takes an object of lcm:ProvisioningToken as an entry called "token".

  • Inside of this workflow (let's call it 'Add disks to ask'), you will need to retrieve the additionalDiskCount and additionalDiskSize values that have been stored with the token:

  additionalDiskCount = System.getModule("com.vmware.lcm").getDataFromTokenKeyAsString (token, "additionalDiskCount");

  additionalDiskSize = System.getModule("com.vmware.lcm").getDataFromTokenKeyAsString (token, "additionalDiskSize");

  • You then get the object of VMware3:VirtualMachine of your token:

  VM = System.getModule("com.vmware.lcm.vim3").getVmFromToken (token);

  • Then, using those extracted values and the virtual computer object, use a loop to pass these parameters and some other default values you want in the workflow 'Add drive' (it's in the category library/VIM 3/Virtual Machine management/Device Management workflow.)

  • Once you have confirmed that this new workflow 'Add disks to ask' is working properly by passing only an object token with these entries of additional data stored with them, you can add this workflow for the reminder 'onCreate '.

  The above process is a general approach that could be taken. The specifics of real workflows that you create are up to you and the support of this customization

  Good luck!

  Visit me on http://www.vcoteam.info for vCenter Orchestrator tips and tutorials

• Error: Failed to create the application process: operation not permitted - deployment of ripple to Dev Alpha

  Hey people,

  I was puzzled on this the last bit of time and can't seem to find a solution. (The closest thing I could find is here: http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/Webapp-not-starting-on-device-VM... but there does appear to be a response [UPDATE: Adam Stanley mentioned that it was due to a missing Debug token, and this isn't the case for me.])

  When I try to "Package & launch" of the ripple, the project is created correctly and even installs the application on the device (is the application icon on the home screen). However, when he tries to run the application, the console of the ripple spit:

  "Error: cannot create the application process: operation not permitted".

  Any later attempt to open the application from the icon on the screen will result in an immediate fall.

  As an attempt to circumvent, I use "Package & sign" and then run the blackberry-deploy with installApp - launchApp - tool options and... it generates the same error as described above.

  I'm working on OS X, and I successfully installed the Webworks SDK as well as the undulation on Chrome Plugin. I have a project together upward with a running python web server and can view the content properly on the ripple. I have my signature correctly registered keys and I generated the file debugtoken.bar. I downloaded the debugtoken on the alpha dev successfully device and placed a copy of the debugtoken.bar file in the root folder of the SDK Webworks. The unit is in developer mode.

  Someone at-troubleshooting suggestions?

  [Edited for format (original post deleted line breaks) and also to highlight a number of things]

  So after getting back to the question, I loaded build with the SDK 1675 Webworks (1.0.4.5) published today, and I was able to go beyond the permission error that plagued me previously.

  Thanks again for the help Adam.