dynamic query send multiple values dynamically

Similar Questions

• How to pass multiple values to a data model parameter

  I have a data model, where I put a setting like this.
  
  Select col1, col2, col3 from table1 where col1 =: param1
  
  This works very well for a single value that I pass the param1 parameter.
  
  How can I get this to work when I want to send multiple values for param1. I already checked the box "Multiple values" and tried to change the sql for this code.
  
  Select col1, col2, col3 from table1 where col1 in: param1
  
  Looks like I'm missing something here.
  
  
  
  Thanks in advance!
  Kris

  you need to write it as:

  Select col1, col2, col3 from table1 where col1 in (: param1)

  It works for me.

  Klaus

• How to select multiple values in a single field.

  Hi all
  
  I once select stmt as below
  
  ==================================
  
  SELECT msi.segment1,
  IN l_chr_omc_item
  OF SGM_INV_ITEM_ATTRIBUTES SIIA, msi mtl_system_items
  WHERE msi.inventory_item_id = siia.inventory_item_id
  AND siia.attribute12 = l_chr_tsb_item;
  
  ======================================
  
  I need to print some l_chr_omc_item, but if the above query retrieves multiple values of the l_chr_omc_item for a l_chr_tsb_item so I need to print all the values. How to get all these values in a single rank.
  Thanks in advance.
  
  Published by: Shivaji M on June 28, 2009 23:18
  
  Published by: Shivaji M on June 28, 2009 23:27

  cursor curGetxx (inpl_chr_tsb_item in SGM_INV_ITEM_ATTRIBUTES.attribute12%type)
  is
  SELECT
  MSI. Segment1
  Of
  SGM_INV_ITEM_ATTRIBUTES SIIA
  msi mtl_system_items
  WHERE msi.inventory_item_id = siia.inventory_item_id
  AND siia.attribute12 = inpl_chr_tsb_item;

  l_chr_omc_item SGM_INV_ITEM_ATTRIBUTES.attribute12%type;
  vStrl_chr_omc_item varchar (500);

  Start
  Open curGetxx (l_chr_tsb_item);
  loop
  extract the curGetxx in l_chr_omc_item;
  When the output curGetxx % NOTFOUND;
  vStrl_chr_omc_item: = concat (l_chr_omc_item, ',')
  dbms_output.put_line (l_chr_omc_item);
  end loop;
  vStrl_chr_omc_item: = substr (vStrl_chr_omc_item, 1, length (vStrl_chr_omc_item)-1);
  end;
  /

• Cannot get 'IN' text field with multiple values.

  I have a text field (P11_SERIAL_NUMBERS) someone would use to enter multiple values (i.e. of the serial numbers). I tested various methods but can't seem to get anything working. I used values such as ' 12929', '19191' or ('11919', ' 19192 ', ' 1111') or 12121,121333.»
  
  I have to analyze this area after the entrance is and update P11_SERIAL_NUMBER to something like ("121212 ', 121211', '292929'). The report is a SQL query returning the body of a PL/SQL function. I build the query in an anonymous block to something like the following:
  
  SELECT apex_item.checkbox (1, instance_number) Ins,.
  apex_item. Text(2,i.instance_number) instance_number.
  apex_item. Text(3,i.item_number) item_number.
  description of the apex_item. Text(4,i.Description),
  Serial_number apex_item. Text(5,i.serial_number),
  i.party_name,
  i.status_name
  Cycsi_item_details_v I have
  WHERE i.item_number IN (SELECT v.item_number FROM cycsi_installed_base_v WHERE v.serial_number = i.serial_number v)
  AND i.item_number AS NVL ('%' |') XLA' | ' %','%')
  AND NOT EXISTS (SELECT d.item_serial_number FROM cy_fco_d, d WHERE d.fco_id = 2803 AND d.item_serial_number = i.serial_number) AND i.serial_number IN ('61763 ', ' 61621');
  
  However, when I enter several values that nothing ever went back to the SUMMIT even though the SQL query returns more rows. I run the application in debug mode and it seems to show the values correctly.
  
  0.11: show report
  0.12: determine the column headings
  0.12: analyze the query such as: TRAFFIC
  0.15: binding: ": P11_MODEL_NUMBER"= "P11_MODEL_NUMBER" value = "XLA"»
  0.16: binding: ": P5_FCO_ID"= "P5_FCO_ID" value = "2803"»
  0.17: binding: ": P11_SERIAL_NUMBERS"= "P11_SERIAL_NUMBERS" value = '(' 61621', ' 61763')""
  0.19: print the column headings
  0.19: loop lines: 15 rows
  No data found
  
  If I add only a serial number at a time as the APEX application returns the line correctly.
  
  
  Does anyone have an idea what I'm doing wrong or what best way to solve this problem?
  Thank you
  John
  
  Published by: Jennifer on July 13, 2010 15:23

  Hi John,.

  I just tried a report region based on PL/SQL query encoded using your method to refer to element names in the query string of back:

  declare
     q varchar2(100) := 'select ename, job from emp';
  begin
     if :P2_ENAMES is not null then
          q := q || ' where ename in :P2_ENAMES';
     end if;
  
     wwv_flow.debug('*** Query: ' || q);
  
     return q;
  end;
  

  As I suspected, he did not work for me P2_ENAMES was ('KING') or ('KING', 'SMITH'). I think it's because of the reason for which I gave in my previous post - ApEx passes off the coast of the dynamic execution of SQL string, it does not automatically replace the mention: P2_ENAMES with the value of the element. I don't know how it can work for you.

  If I change the code I proposed:

  declare
     q varchar2(100) := 'select ename, job from emp';
  begin
     if :P2_ENAMES is not null then
          q := q || ' where ename in ' || :P2_ENAMES;
     end if;
  
     wwv_flow.debug('*** Query: ' || q);
  
     return q;
  end;
  

  It works very well if one or several names are specified.

  I took a blow to modify your code for the construction of the query string - does not immediately guarantee, it'll work because I can't test (might be missing a parenthesis or quotation) it but you should get the idea:

  -- start with initial valid query that ApEx can parse to determine column names
  q := 'SELECT apex_item.checkbox(1, instance_number) ins, apex_item.text(2, i.instance_number) instance_number,
               apex_item.text(3, i.item_number) item_number, apex_item.text(4, i.description) description,
               apex_item.text(5, i.serial_number) serial_number, i.party_name, i.status_name
          FROM cycsi_item_details_v i
         WHERE i.item_number IN (SELECT v.item_number
                                   FROM cycsi_installed_base_v v
                                  WHERE v.serial_number = i.serial_number)';
  
  -- add model number condition if specified
  if :P11_MODEL_NUMBER is not null then
     q := q || ' AND i.item_number LIKE ''%' || :P11_MODEL_NUMBER || '''%''';
  end if;
  
  -- add serial numbers condition if specified
  if :P11_SERIAL_NUMBERS is not null then
     q := q || ' AND i.serial_number IN (' || :P11_SERIAL_NUMBERS || ')';
  end if;
  
  -- add FCO id condition if specified
  if :P5_FCO_ID is not null then
     q := q || ' AND NOT EXISTS (SELECT d.item_serial_number
                                   FROM cy_fco_d d
                                  WHERE d.fco_id = ' || :P5_FCO_ID || '
                                    AND d.item_serial_number = i.serial_number)';
  

  I know that has focused on getting this code works, but I would be remiss in my duties if I didn't at least mention the risk of SQL injection. You may already know this, but unless you do a good job to validate the values of the element used in the query, you could open yourself up to a SQL injection attack. For example, imagine what that would be returned if a hacker sharp entered "12345) GOLD (1 = 1" in the field of P11_SERIAL_NUMBERS - you would get all that may or may not be a security problem.

  Hope this helps,
  John

• reload the page when SQL query returns a value

  Hello world

  the title of this discussion may seem strange, but I'll try to explain why I need this:

  A user has the ability to connect on my APEX application. There are several tabs in my application that are visible only if a certain SQL statement returns a value which is not the case by default. The user has also the ability to download a file that is transferred to an external system that analyzes the file and writes the data in the database. During this writing process - which may take several minutes - conditions for some of the tabs to show the will becomes real (-> the query will return a value). When the user refreshes the page manually, the tabs will be displayed. However, I want the tabs will appear automatically when the condition is met.

  Is it possible to refresh the page as soon as the query returns a value? It is perhaps possible to check it on the client side and trigger a refresh of the page when the condition is met. It would be even better if only the tabset has been updated, but refreshing the full page is fine as well.

  Thank you!

  Here is an overview of how it can be done

  This is possible thanks to a dynamic action being performed on a timer.

  View default tabs and dynamic action hide them on loading the page if they are not to be considered

  Create a dynamic action that will execute your query every 5 seconds or more

  If the query returns data, you can use the dynamic action to show your tabs using javascript

• a problem in passing multiple values in the loop settings for

  Hi all
  
  I am facing a problem in passing multiple values in the loop settings for.
  
  
  EX:
  
  CREATE or REPLACE PROCEDURE (pr_id OUT NUMBER) HAVE
  
  
  tab type is table of NUMBER;
  
  TEMP_TAB TAB;
  
  BEGIN
  
  Select the COLLECT LOOSE pr temp_tab pr_id;
  
  I'm in 1.TEMP_TAB. loop of COUNTING
  
  PR_ID: = temp_tab (i);
  
  end loop;
  
  END TEST;
  
  OUTPUT:-
  
  pr_id = 234578
  
  
  in the example above, I'm only a value as an out parameter. but I send you PR_ID of the loop.
  why I don't get all the values that the parameters.please offer a solution for me.
  
  Thank you my friend.

  More clarification, let's look at your code...

  -- create a procedure and have a single numeric out variable
  CREATE OR REPLACE PROCEDURE TEST ( pr_id OUT NUMBER ) AS
    -- declare a type as an array of numbers
    type tab is table of NUMBER;
    -- declare a varianble of that array type
    TEMP_TAB TAB;
  BEGIN
    -- query all the values from the table into the array
    select pr_id BULK COLLECT INTO temp_tab from pr;
    -- loop through each value in the array
    for i in 1..TEMP_TAB.COUNT loop
      -- set the value of the single OUT parameter, OVERWRITING any previous value it has
      PR_ID := temp_tab(i);
      -- loop around to the next value
    end loop;
    -- end the procedure with the final value of PR_ID
  END TEST;
  

• What subprogramme should we prefer to return multiple values with OUT parameter?

  Hello

  I worked on the procedures and functions, and aware of their differences. Today I have an interview question that - suppose I don't have return multiple values through a subroutine and I want nor run any what DML within this subprogramme and I want to use this subprogramme in the SQL query. What subprogramme I would prefer - "Operating Mode" or "Function" and why?

  In my view, both can be used in this case, but want to see your views and opinions.

  Kind regards

  Sachin jerbi

  In terms of software engineering, if you claim something that you expect to "return" something (a value or values) then you use a function.  If you call something to "do" something, and then you use a procedure.

  THE settings are not good practices in many cases and should not strictly considered "return" of values.  Instead, they are assigned values in the code and generally act as pointers to the original variable/structure that was passed as a parameter (the actual internals of Oracle don't quite do it, but in principle this is what they do).

  A return value (or structure) of a function is basically push in the battery to the point that the RETURN statement is issued, and then the code calling the stack appears to assign it to a variable or placeholder, it should go in.

  If it seems a little difference between procedures and functions to some people, it is recommended to use functions for obtaining values and procedures to do things, in most cases.  It is not just "syntactic sugar", as mentioned above.

• Multiple values in the dashboard application application database Direct

  Hello

  I created a direct request from the database that accepts input from a prompt by a variable of presentation, either placed in request of db query. I realized in the process that I had to give a default input to the variable of the presentation of the petition. The input variables passed from the dashboard quick came in the right format, only if they are placed in quotation marks, Eg: "Input_Var".

  After all this, I came across a problem when multiple values are entered, the query is generated with an incorrect format. Here is the example:

  Select col1, col2

  of TabXX

  where username IN "Acct_Nm1", "Acct_Nm2"; ')}

  Is there anyway to solve this problem. Thanks in advance.

  Hi all

  I used the sequence next to convert the string separated by commas, received XML from the dash prompt.

  "Select XXX".

  movies XXX

  where the value

  in (SELECT )

  EXCERPT (VALUE (d), ' / / row/text () ") .getstringval)

  Of

  (SELECT XMLTYPE ('' |)) REPLACE ('VALUEOF (NQ_SESSION.req_var)', ';', ''). ') AS xmlval

  The DOUBLE) x,.

  ( TABLE (XMLSEQUENCE (EXTRAIT (x.xmlval, '/ lignes/ligne'))) d)"

  Create a query variable 'req_var' in the prompt to serve in "VALUEOF (NQ_SESSION.req_var)" and pass it to the report. It will be useful.

  Thank you.

• Passing multiple values at the request of the State (no status page)

  Hello

  [APEX 4.2.4.00.08 on the 11.2.0.3 database]

  I didn't know how to explain briefly what I need in the title of the discussion, that's why I added the song "(non page rapport)". "  I met a lot of threads associated with passing of selections multiple values from one page to another, or via a URL from one page to another.  I know how to do this.  The problem I have right now is trying to pass the commas of the values contained in an application to a report query element.  Here's where the "(rapport non page) ' comes into play."  I refer to the report query at the level of the application (i.e. shared components-> report queries).  I wish really it had another name for it.  "Report on the application of queries", perhaps?

  In any case, my report query has a bind variable, AI_ID_NUMBERS, that is defined correctly in the shared-> components report queries. However, when this item application has multiple values such that AI_ID_NUMBERS = 4, 5, 6, 7 etc., my URL looks like this:

  myapexsite.com/f? p = 456:2:1234567890:PRINT_REPORT = report_1:AI_ID_NUMBERS:4, 5, 6, 7

  So, this returns only one record for the report where the identification number is 4, one.  I tried a string parameter of Substitution of Application (URL_REPORT_1) with the two following variants (for which both return only a single record):

  Substitution string = URL_REPORT_1 and Substitution value = f? p = & APP_ID.:0 : & SESSION. : PRINT_REPORT = report_1:AI_ID_NUMBERS: & AI_ID_NUMBERS.

  Substitution string = URL_REPORT_1 and Substitution value = f? p = & APP_ID.:0 : & SESSION. : PRINT_REPORT = report_1:AI_ID_NUMBERS:-& AI_ID_NUMBERS. \

  returns...

  myapexsite.com/f? p = 456:2:1234567890:PRINT_REPORT = report_1:AI_ID_NUMBERS:4, 5, 6, 7

  myapexsite.com/f?p=456:2:1234567890:PRINT_REPORT=report_1:::AI_ID_NUMBERS:\4,5,6,7\

  .. .respectively

  I really thought that the backslashes would have solved the problem.  Any ideas why my report request (PDF) returns only one line?

  Thank you

  -Seth.

  Well, too bad. I realized the mistake I did.

  When you work with 'request report queries', there is an option to include variable bind, for example the application or page elements.  I had already done that, but for some reason, thought that I also had to pass the parameter and its values in the URL.  This is not necessary since the report query query already has the issue of the application/page related to it.  The following URL works fine:

  myapexsite.com/f? p = 456:2:1234567890:PRINT_REPORT = report_1

  And, Yes, it's the URL that is provided when you set up a "application report query.  I was thinking too hard.

  -Seth.

• Search for multiple values in a single field

  Hello

  I have this request to get results when the user doing a search query:

  select * from (
  select 
  "ID",
  "ID" ID_DISPLAY,
  "SHIFT_DATE",
  "SHIFT",
  "OFFENSE_ID",
  "DESCRIPTION",
  "ANALYST",
  "STATUS",
  "SUBSTATUS"
  from "#OWNER#"."IDSIEM_OFFENSES") 
  where
  OFFENSE_ID IN(:P223_OFFENSES) AND
  
   (
   instr(upper("DESCRIPTION"),upper(nvl(:P223_DESCRIPTION,"DESCRIPTION"))) > 0 
  )
  AND
  (
   instr(upper("SHIFT"),upper(nvl(:P223_SHIFT,"SHIFT"))) > 0 
  )
  AND
  (
   instr(upper("SUBSTATUS"),upper(nvl(:P223_SUBSTATUS,"SUBSTATUS"))) > 0 
  )
  AND
  (
   instr(upper("ANALYST"),upper(nvl(:P223_ANALYST,"ANALYST"))) > 0 
  )
  AND
  (
   instr(upper("SHIFT_DATE"),upper(nvl(:P223_SHIFTDATE,"SHIFT_DATE"))) > 0 
  )
  AND
  (
   instr(upper("STATUS"),upper(nvl(:P223_STATUS,"STATUS"))) > 0 
  )
  
  ORDER BY OFFENSE_ID DESC
  

  The thing I want to do is to set multiple values in the P223_OFFENSES field when I search. For example, an offence is a number, so I want to put in the search box 1111, 3333, 4444, 5555 and the report shows me these 4 offences in the report. The search operation only works when I put only 1 offences, but when I put more than 1, separated by commas, it gives me this error: error report: ORA-01722: invalid number. That is why, because is a number and the character point is not allowed, how can I achieve this? Thank you in advance.

  Best regards, Bernardo

  I solved a problem like this a few times with a utility function of pipeline for extracting the values from the list:

  CREATE or REPLACE TYPE split_tbl AS TABLE OF VARCHAR2 (32767).

  /

  FUNCTION to CREATE or REPLACE split_list

  (

  p_list VARCHAR2

  p_delimiter VARCHAR2: = ', '.

  ) Split_tbl RETURN

  PIPELINED IS

  l_idx PLS_INTEGER;

  l_list VARCHAR2 (32767): = p_list;

  BEGIN

  LOOP

  l_idx: = instr (l_list, p_delimiter);

  IF l_idx > 0

  THEN

  LINE of CONDUCT (substr (l_list, 1, l_idx - 1));

  l_list: = substr (l_list, l_idx + length (p_delimiter));

  ELSIF TRIM (l_list) IS NOT NULL

  THEN

  PIPE ROW (l_list);

  EXIT;

  ON THE OTHER

  EXIT;

  END IF;

  END LOOP;

  RETURN;

  END split_list;

  /

  In this way, you can define SQL like:

  SELECT to_number (column_value) FROM TABLE (split_list (' 1, 3, 99', ','))

  Or for this specific case: replace the condition

  OFFENSE_ID IN(:P223_OFFENSES)

  with

  OFFENSE_ID IN (SELECT to_number (column_value) FROM TABLE (split_list (: P223_OFFENSES, ',')))

  The advantage over using instr or regex is that you can usually always benefit index on OFFENSE_ID

  Better also to restrict entry to only numbers and ', ' or you will always get invalid numbers errors if a user enters "1234, 567, ABC"in the field of P233_OFFENSES.

  Kind regards

  Thierry

• How to use Ajax get multiple values in an array?

  Hi All-

  I am using AJAX to get multiple values in a table using example of Denes Kubicek in the following link-

  http://apex.oracle.com/pls/otn/f?p=31517:239:9172467565606:NO:

  Basically, I want to use the drop-down list to fill the rest of the values in the form.

  I created the example (Ajax get several values, 54522 application) on the Oracle site.

  http://apex.oracle.com/pls/apex/f?p=4550:1:0:

  Workspace: iConnect

  Login: demo

  password: demo

  I was able to reproduce his example on page 1 (homepage).

  However, I want to use system generate a table to complete this example and was not able to complete the data correctly.

  Page 2 (method 2) is that I'm struggling to fill the column values. When I checked the item application values in the Session, and values seems to be filled properly.

  That's what I did on this page:

  1 create an Application process on-demand - Set_Multi_Items_Tabular2:

  DECLARE
    v_subject my_book_store.subject%TYPE;
    v_price my_book_store.price%TYPE;
    v_author my_book_store.author%TYPE;
    v_qty NUMBER;
  
    CURSOR cur_c
    IS
    SELECT subject, price, author, 1 qty
    FROM my_book_store
    WHERE book_id = :temporary_application_item2;
  BEGIN
    FOR c IN cur_c
    LOOP
    v_subject := c.subject;
    v_price := c.price;
    v_author := c.author;
    v_qty := c.qty;
    END LOOP;
  
    OWA_UTIL.mime_header ('text/xml', FALSE);
    HTP.p ('Cache-Control: no-cache');
    HTP.p ('Pragma: no-cache');
    OWA_UTIL.http_header_close;
    HTP.prn ('<body>');
    HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
    HTP.prn ('<item id="f04_' || :t_rownum || '">' || v_subject || '</item>');
    HTP.prn ('<item id="f05_' || :t_rownum || '">' || v_price || '</item>');
    HTP.prn ('<item id="f06_' || :t_rownum || '">' || v_author || '</item>');
    HTP.prn ('<item id="f07_' || :t_rownum || '">' || v_qty || '</item>');
    HTP.prn ('</body>');
  END;
  
  
  
  
  
  

  2. create two objects application - TEMPORARY_APPLICATION_ITEM2, T_ROWNUM2

  3. put the following text in the Page header:

  <script language="JavaScript" type="text/javascript">
  function f_set_multi_items_tabular2(pValue, pRow){
      var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
  'APPLICATION_PROCESS=Set_Multi_Items_Tabular2',0);
  if(pValue){
  get.add('TEMPORARY_APPLICATION_ITEM2',pValue)
  get.add('T_ROWNUM2',pRow)
  }else{
  get.add('TEMPORARY_APPLICATION_ITEM2','null')
  }
      gReturn = get.get('XML');
      if(gReturn){
          var l_Count = gReturn.getElementsByTagName("item").length;
          for(var i = 0;i<l_Count;i++){
              var l_Opt_Xml = gReturn.getElementsByTagName("item")[i];
              var l_ID = l_Opt_Xml.getAttribute('id');
              var l_El = html_GetElement(l_ID);    
              if(l_Opt_Xml.firstChild){
                  var l_Value = l_Opt_Xml.firstChild.nodeValue;
              }else{
                  var l_Value = '';
              }
              if(l_El){
                  if(l_El.tagName == 'INPUT'){
                      l_El.value = l_Value;
                  }else if(l_El.tagName == 'SPAN' && l_El.className == 'grabber'){
                      l_El.parentNode.innerHTML = l_Value;
                      l_El.parentNode.id = l_ID;
                  }else{
                      l_El.innerHTML = l_Value;
                  }
              }
          }
      }
      get = null;
  }
  </script>
  
  
  Add the follwing to the end of the above JavaScript:
  
  <script language="JavaScript" type="text/javascript">
  function setLOV(filter, list2)
  {
   var s = filter.id;
   var item = s.substring(3,8);
   var field2 = list2 + item;
   
   f_set_multi_items_tabular2(filter, field2);
  }
  
  
  
  
   
  
  
  

  4 query in the form:

  select
  "BOOK_ID",
  "BOOK",
  "SUBJECT",
  "PRICE",
  "AUTHOR",
  "QTY",
  "BOOK_ID" BOOK_ID_DISPLAY
  from "#OWNER#"."MY_BOOK_STORE"
  
  
  
  
  
  

  5. in the column of Book_ID_DISPLAY attribute:

  Add the following code to the attributes of the element: onchange = "javascript:f_set_multi_items_tabular2(this.value,'#ROWNUM#'); »

  Changed-> onchange = "javascript:setLOV(this,'f03'); »

  Now, T_ROWNUM2 returns the value as f03_0001. But TEMPORARY_APPLICATION_ITEM2 returns in the form [object HTMLSelectElement]...

  Please help me to see how I can fill the data in the tabular presentation format. Thank you in advance!

  Ling

  Updating code in red...

  Ling

  LC says:

  Application	Item Value	Item Name
  54522	3	TEMPORARY_APPLICATION_ITEM2
  54522	f03_0003	T_ROWNUM2

  No T_ROWNUM2 should be 0003.

  I made a copy of your page to make corrections.

  There are several problems.

  First you where submiting T_ROWNUM2 whereas you would use: t_rownum in the pl/sql code.

  I changed the name of the element in the f_set_multi_items_tabular2.

  Secondly you where now affecting the rownumber f03_0001 for the first line.

  Resulting XML returned as follows.

  this xml genericly sets multiple items
  CSS Mastery
  22
  Andy Budd
  1
  
  

  I changed the following text in the show_lov.

  var point = s.substring (4.8);

  var Field2 = item;

  I also had a compilation of pl/sql code error, there was a); missing the end of the last item. Fixed that too.

  But why do you think lpad won't work for lines 10 and more.

  LPAD ('10', 4, '0') will give "0010"

  LPAD ('100 ', 4,'0 ') will give "0100"

  LPAD ('1000 ', 4,'0 ') will give '1000'

  So unless you have more than 9999 lines you would have no problem.

  Nicolette

• spend multiple values lists at different page Manager

  Hello
  I try to convey the values of a list manager page 2 to a box of text on page 1 item when this button is clicked. (I tried only point display, any type of element is fine as long as it displays multiple values)
  
  I always get only the first value in the list manager spent. Can you help me get all values?
  
  I created a workspace to explain the problem.
  
  Workspace: TIMES
  Username: TESTBUTTON
  password: hiking
  
  Application: report
  
  I have two pages, on page 2, I have a list manager and once I select several values and press go, it redirects to page 1 and sets the value of article D with the value. How to set multiple values?
  
  Any help is greatly appreciated.
  
  Thank you
  Priya

  Spriya wrote:
  Hello
  I try to convey the values of a list manager page 2 to a box of text on page 1 item when this button is clicked. (I tried only point display, any type of element is fine as long as it displays multiple values)

  I always get only the first value in the list manager spent. Can you help me get all values?

  I created a workspace to explain the problem.

  Workspace: TIMES
  Username: TESTBUTTON
  password: hiking

  Application: report

  I have two pages, on page 2, I have a list manager and once I select several values and press go, it redirects to page 1 and sets the value of article D with the value. How to set multiple values?

  Manager of the list items using the colon (': ') to separate multiple values. The values containing a colon cannot be passed in the URL of the APEX, where they make a special use as separators between the components of the query string. Therefore, the content of a list manager containing more than 1 value can be passed using a redirection branch which passes by the URL values.

  Another approach is to set the value of the target in a process of (conditional on the same key as the branch) page rather than in the branch.

• Attributes to multiple values of OAM 11 GR 2 as header

  Hello Experts
  
  Is there a way to OAM 11 GR 2 to change the delimiter used to separate the values passed in the headers for the multivalue attributes. By default, if you pass a values multiple attributes like header attributes values will be passed by comma (,) as a separator (E.g. MulAttrVal = val1, val2, val3, val4). We want to change this behavior in such a way that the delimiter must be colon (:) so this header values looks like this (MulAttrVal = val1:val2:val3:val4))
  
  Background:
  
  We are migrating Oblix Netpoint 7.x environment to 11 GR 2 OAM (manual migration).
  
  Oblix Netpoint policy if you change an attribute to multiple values as a header, the values in the attribute will affect that colon (:) delimited values
  Ex. MulAttrVal = MulAttrVal = val1:val2:val3:val4
  
  We see a different behavior in OAM 11 g 2 where in politics if you pass an attribute to multiple values as a header, the values in the attribute will be passed as the comma (,) delimited values
  Ex. MulAttrVal = val1, val2, val3, val4
  
  Customer developed more than 40 applications that has logic to accept values of header with colon (:) delimited and process these values.)
  
  Kindly, let us know how we can change the behavior of OAM 11 GR 2 to send the values of attribute with colon (:) delimited. Is there some way we can specify the delimiter in the language of political expression. We retrieve the LDAP attributes by using the following expression: ${user.attr.MulAttrVal}
  
  Several attributes are detached by our Sun Directory Server 5.2 user store.
  
  Kind regards
  Knockaert

  Hello Karthik,

  It is not possible to change the delimiter in OAM 11 g, as you point out it is a comma. There is an existing enhancement request to allow a custom delimiter to be defined (14314696), but it is currently not possible.

  Kind regards
  Colin

• Passing multiple values to the report

  Hello
  I have a form of parameter. One of the field will have at least one value. When there are multiple values, the values will be separated by a comma and pass on to the State. Please tell me how to separate them and put them in the citation in the report query.
  EX: values are: PO, DR
  There will be in the where condition as: where code in ('OP', 'DR');
  Thank you in advance.
  
  PS. I use 10g
  
  Published by: 945599 on 10 July 2012 14:04

  Hello

  I sent the unit test by mail.
  Please note that there are some hardcoded values when you use run_report_object (name of report server and host name).

  Kind regards
  Alex

  Published by: AlexDiniasi on 19.07.2012 17:14

• Possible to contain variable multiple values?

  Is it possible the variable contains multiple values?
  
  In fact, I need to hold a multiple value multiple value.
  
  Procedure:
  
  Remove employee where empno in (#variable)
  
  Table Employees: Informix
  
  
  variable code #:
  
  Select relieved_employee_id in the relieved_employees (return multiple values)
  
  Employees table raised is in SQL SERVER
  
  
  any other approach simple approach...
  
  
  How can I approach my requriement?

  Hello

  Is it possible the variable contains multiple values?

  Usually variable ODI hold one value returned by a select query

  Procedure:

  Remove employee where empno in (#variable)

  Table Employees: Informix

  variable code #:

  Select relieved_employee_id in the relieved_employees (return multiple values)

  Employees table raised is in SQL SERVER

  any other approach simple approach...

  How can I approach my requriement?

  You can try something simiral to the following

  create an ODI procedure

  Command on the source tab:

  SQL SERVER technology
  Logic diagram should point to your schema that contains the table of relieved_employees

  query: Select relieved_employee_id you relieved_employees EMP_ID

  Target control on the tab:

  Technology: Informix
  Logic diagram should point to your schema that contains the employees table

  query: delete from employee where empno = #EMP_ID

  This will make a loop through all the values returned by your query source and delete target.

  Thank you
  Fati