Dynamically add attributes to xmlelement

Similar Questions

• Dynamically add attributes to elements (XMLType)

  Hello
  
  I get a stream from a Web Service that I load in an XMLType XML variable. I want to then insert the XML into an XMLType column that conforms to an XSD that I registered in XDB. The problem I have is that the XML code actually does not set the attribute xsi: schemaLocation so I can not load in my XMLType column because of the ORA-19007 schema and element do not match
  
  Is it possible that I can dynamically change the XML and add the attribute xsi: schemaLocation in the root node?
  
  Thank you very much
  
  Tom Casserly
  
  PS. I use Oracle XDB 9.2.0.4

  Tom

  It was address in 10.1 or 10.2, where we will try to automatically mount the XML to the defined schema. I guess that the upgrade is not an answer. has the method createSchemaBaseXML() on the XMLType 9.2.0.4.0.

  M

• Adding dynamic transitional attribute to seeds VO

  Hello
  
  I do a substitution of controller of the basket as iProcurement who gets a reference to the seeded page PoRequisitionLinesVO. He then walks lines checking a condition in each line. I want to dynamically add an attribute to the VO so that for each line, I have the attribute transient STATUS which will be displayed in an item in plain text on the shopping cart page. I want to do it dynamically without a substitution of VO.
  
  I tried to use the VO method addDynamicAttribute and it does not raise an error, but I'm not sure how to set this attribute through a reference to the line. I can find no mention of how dynamically create a transitional attribute for VO.
  
  
  Kristofer Cruz

  Hello

  You can add the attribute using addDynamicAttribute and then do setAttribute by traversing the line to set a value.

  See this thread it has code to add attribute transient
  Re: problem with attribute transient attach to standard vo of the controller

  If you want you can customize the page to add RawText or you can also do to the controller.

  Why you don't want to VO Substitution?

  -Idris

• Add attributes to the class IMAQdx

  I have a Subvi change several attributes of the camera; However, none of these attributes are included in the class IMAQdx.  Therefore, I have to use a long doubling property node where each value, I want to view or change, I must first write this attribute as current attribute.  Is it possible to add attributes to the class, so they will fill in the list of nodes of property of the attributes of the camera?

  Sorry, no, it is not possible today. We are actively seeking improvements API to address this kind of problem in the future versions, however. Out of curiosity, are properties youj are eager to change provider-specific or are common already specified by the features Standard Naming Convention (http://www.emva.org/cms/upload/Standards/GenICam_Downloads/GenICam_SFNC_2_2.pdf)

  Eric

• How to dynamically add a plot to a graph of mixed signals

  I have a graph of mixed signals where I'm plotting a signal from a time axis. I'm trying to dynamically add a second plot to this graph against the same time axis (with a different scale of Y), but when I built a 2D array and try to connect in the graph (using a local variable) I get an error of size mismatch. I know for sure I did in the past (cable tables with different sizes for a same MSG) with no problems but, today, for some reason any I can't solve this problem.

  Am I missing something?

  Yes, you're probably writing a table 1 d somewhere that is causing to accept only 1 d. To address your problem above, just put a table node build in whenever you have a 1 d table and it will be just a 2D array with a single line of data.

  To add a field to your current locations, your screenshot above should work once the plot knows that he has to accept the 2D tables.

  Reading from a local variable, change something and then write about it once again can lead to a lot of issues down the line. Race conditions are a pain in the butt, so get rid of that sort of thing is good to do from the start. I didn't know the rest of your code, so I don't know how you treat it, but just keep in mind that you add to your software.

• Write to the file of measurement with a loop For using the value of the dynamic data attributes

  I looked and looked, but couldn't find a solution for this.

  I currently have 15 points of different data that I try to write in an Excel file.  I have all combined in a table and lie with the function "write into a file position.  However, the column names are always "Untitled", "Untitled 1" etc.  I then used the function 'Set the Dynamic Data attributes'; but for this I have to do 15 different functions "set data dynamic attributes.  It was suggested to use a loop with the function 'Set the Dynamic Data attributes' inside of her, but I can't find how do.

  I have several arrays consisting of 15 different values for 'Signal Index' 'Name of Signal' and 'Unit', but also a unique 'get Date/Time In Seconds' related to 'Timestamp '.  The problem is that the error I get when I try to connect the output with Scripture at the entrance to measure file:

  The source type is dynamic data table 1 d.  The type of sink is Dynamic Data.

  How can I fix it?  I have attached a picture of my installation; Sorry if this is gross (I'm new on this!).  Thank you!

  It will get rid of the error, but it is not quite correct. What you need to do after that is to click on the output or the tunnel entry and select 'replace with the shift register. In addition, the array of values that you have wired to the Signal Index is wrong. Arrays are 0 based. Just wire the iteration Terminal here. And, finally, take the size of the table and this connection to the N terminal are stupid. Don't wire nothing to this.

• How to dynamically add an Option in the drop-down list?

  I have this code:

  {Drop-down list

  ID: list

  Title: 'list '.

  onCreationCompleted: {}

  opion var = new Option();

  opion. Text = "Hello";
  opion. Value = 4;

  List.Add (opion);

  }

  }

  After the launch of the application, the list is empty.

  Why my code does not work?

  It is easy to dynamically add options

  first add this to your attachedObjects:

  ComponentDefinition {
              id: optionDefinition
              Option {
              }
          }
  

  then do something like this

  var newOption = optionDefinition.createObject()
              newOption.text = ...
              newOption.value = ...
              newOption.description = ...
              newOption.selected = ....
              yourDropDown.add(newOption)
  

• Dynamically add tabs QML from C++

  Hello world

  I have a simple TabbedPane defined in QML.  I am trying to reference the TabbedPane via C++ to dynamically add tabs.  Is this possible?  With my current setup, the application starts and crashes then with:

  Process 22253787 (MyTabsApplication) terminated SIGSEGV code=1 fltno=11 ip=79310524(/base/usr/lib/libbbcascades.so.1@_ZN2bb8cascades10TabbedPane6removeEPNS0_3TabE+0xf3) mapaddr=00110524. ref=00000010
  

  Here is the code:

  TabbedPane {
      id: mytabs
      objectName: "mytabs"
  
      Tab {
          title: "Tab 1"
          FirstPageView {}
      }
      showTabsOnActionBar: false
  }
  

  C++ :

  ApplicationUI::ApplicationUI(bb::cascades::Application *app) :
          QObject(app) {
  
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
      qml->setContextProperty("app", this);
  
      AbstractPane *root = qml->createRootObject();
  
      TabbedPane *tabbedPane = root->findChild("mytabs");
      Page* page = Page::create();
      Tab* tab = Tab::create()
                   .title("tab2")
                   .description("This is only shown in the side bar");
      tab->setContent(page);
      tabbedPane->add(tab);
  
      app->setScene(root);
  
  }
  

  Thank you!

  Try to declare your root as:

  TabbedPane *tabbedPane =  qml->createRootObject();
  

  As TabbedPane is a class of AbstractPane

• Dynamically add custom headers in ListView

  I'm working with a ListView which is based on a api, that I have no control.

  I dynamically add some custom headers subject see the following as to what I am referring to (A, B)

  http://developer.BlackBerry.com/native/reference/Cascades/bb__cascades__listview.html

  How can I dynamically add these? For example, I want to add a conflict between the first element of the list and the second

  Section A

  Header

  Item B

  Point C

  Hi Philippe,.

  To do this, you must use a custom list item component.

  Heres how I could do that

   

  
  Moreover, in the custom "Header" just create a structure as follows:

  IF/ELSE ON A FLAG

  if(someflag == "header"){
       //use header style
  }else{
     // show normal list style
  }
  

  My Code

  ListView{
  dataModel: ArrayDataModel{
     id: myDataModel
  }
  
  listItemComponents: ListItemComponent
  {
      Container{
         layout: StackLayout{
            orientation: LayoutOrientation.TopToBottom
         }
         Label{
            text: ListItemData // complete data string
         }
         Label{
            text: ListItemData.split("~")[0]
          }
          Label{
            text: ListItemData.split("~")[1]
          }
         Label{
            text: ListItemData.split("~")[2]
          }
      }//end Container
  }//end ListItemComponent
  
  onCreationCompleted: {
     //The data inside append is one item.
  
     //let's append a bunch of data
     for(var i=0;i<30;i++){
         //append 30 list items
         myDataModel.append("Header~Some data whatever~Status");
     }
  }
  }
  

  • In my example I am adding data to the model.

  ListItemData - the full string

  ListItemData.split("~") [0] - first part etc.

  • I shared parts of the data with a single symbol. In my case the «~»
  • To get the data I want to that I just throw a ListItemData.split("~"). It breaks the string into 3 parts.
  • I will be able to access somewhere I want using the notation ListItemData.split("~") [index]
  • You can include paths to images, or whatever the text you

  AS IF THIS HELPED YOU!

• How we can dynamically add or remove action from the popup menu in qml item

  Hi all

  I want to just dynamically add or remove action from the actionset item in the contextual menu especially in qml.

  Thanks in advance.

  Kind regards

  Ankur

  You can do so by joining the actionitem as attachedObjects. Once the page is complete (signal onCreationCompleted), you can add it to the page using addAction()

  To remove, you simply delete the page using removeAction()

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__page.html

• How can I add attributes to all images in a stack?

  It is absurd that you can not add attributes to all elements in a pile without developing the battery (therefore defeat the purpose). Does anyone found a workaround for this?

  Workaround: If you shift - click on the badge of the stack in the upper left corner of a cell, extend it with all its selected photos.  While you add metadata, it will be added to each of them.

  You can use the Syncomatic plugin to copy the metadata and/or develop settings from the top of chimneys for the other photos in the batteries.

  Others have requested an option to control this behavior.  Please add your vote and opinion on this in the Adobe official feedback forum: Lightroom: when you select a stack collapsed, provide opportunity to apply the changes to all the photos in the stack

• Dynamic add to cart

  Hey everybody, just try to see if there's a way dynamically add something to the cart. I see the html code for how works the add to Cart button, but it looks like it uses the ID 'product' to add the product itself. However, I am not able to see how I can retrieve the id of the product if all I have is the 'Product Code' (from {tag_productcode}). These two values are different for non insiders.

  I know that if I work a little longer on that I could just get some ajax to visit the real great product page manually and find add to Cart button and enter the ID of the product in this way, this seems excessive.

  If anyone has any ideas, I would be very grateful.

  With the add to Cart then that.

  I don't know why people do not use the documentation - all that it:

  The developer reference

  {{id}}	{tag_productid}	System displays product ID.
  {{catalogId}}	{tag_catalogueid}

  These two you will need dynamic, but make sure you also get the other correct settings.

• Dynamically add UIComponent without refreshing entire page (JDEV 11.1.1.3)

  Hi all
  I have this problem.
  
  I need to dynamically add an element within a page without refreshing entire page jspx.
  
  For example, look at this page:
  
  
  Titus: _
  Name: _______
  Job: _ (+ add more jobs)
  
  When I click on (+ add more jobs), I add a new RichInputText:
  
  private RichPanelBox pb1;
  
  public String cb1_action2() {}
  RichInputText rc = new RichInputText();
  rc.setId (...);
  [....]
  This.PB1.GetChildren (). Add (RC);
  Returns a null value.
  }
  
  The field is displayed properly on the page, but the system do a full refresh and lose your position on the page.
  
  Obviously becomes inconvenient for the user to have to scroll the page up to a certain point where it was before.
  Is it possible to avoid this problem and to add the field without a complete refresh of the page?
  
  Thank you
  Cristian
  
  Published by: on February 11, 2011 baol 7,53

  Try with PartialSubmit for the button and use PPR as follows:

  JSPX Code:

  
  
  
  
  partialSubmit = 'true '.
  actionListener = "#{SamplePageBean.onAddJobs}" / >
  
  
  
  
  

  Bean code:

  public class SamplePageBean {}
  private RichPanelBox panelBox;

  public SamplePageBean() {}
  }

  {} public void onAddJobs (ActionEvent actionEvent)
  RichInputText richInputText = new RichInputText();
  richInputText.setId ("Id1");
  richInputText.setLabel ("Job Title");
  this.panelBox.getChildren () .add (richInputText);
  AdfFacesContext.getCurrentInstance () .addPartialTarget (this.panelBox);
  }

  {} public void setPanelBox (RichPanelBox panelBox)
  this.panelBox = panelBox;
  }

  public RichPanelBox getPanelBox() {}
  After a return;
  }
  }

  Thank you
  Nini

• Dynamically add the instance of a class

  Im trying to dynamically add instances of a class. I need to do it in a loop. How would I go to do something of this nature?

  Basically...

  for (var i: uint = 0; i

  var newInstance:YourClassName = new YourClassName();

  addChild (newInstance);

  }

• How to dynamically add data in a Spark list control

  Hi, I have a spark list in one of my custom components() control(id="Cclist") and a text input control. When a value is entered in the entry of the texts, I want to dynamically add the same in the list control. I tried to do the following:

  protected function Cc_selectHandler(event:CustomEvent):void
  

  {

   var cctext:DisplayObject = event.data as DisplayObject
   CcList.enabled = true;
   CcListButton.enabled = true;
  
   CcList.addChild(cctext);
  

  }

  But I get an error saying "addChild() is not available in this category.  "Instead, use addElement(), or change the skin. So I tried to use addElement, but apparently it is not available at all. No idea what im doing wrong?

  Add the text entered in the textinput to the dataProvider of the list in the appropriate format.

  A simple example: