E HP6830 all-in-one: with disabilities... network configurations please help

Similar Questions

• 23 envy d027c All In One with the card mother Lavaca3-SB IPISB - NK. How to upgrade the video card?

  I have a HP Envy 23 d027c All In One with the card mother Lavaca3-SB (pegatron) IPISB-NK.  It has a PCI slot available for upgrade of the video.  I want to do this.  I intend to use the pc for video processing and maybe a few games.

  How to pass the video?

  What cards are best for this system?

  What has changed in the BIOS or other settings I should do?  How can I get them?

  Thank you

  Art

  The PCIe MXM slot is for HP install graphics cards in some models CTO (configure-to-order). Without the card installed when you purchased the computer, there the fan and radiator bad sets. You will need to buy a graphics card and the heatsink / fan of HP to try to upgrade the GPU in your computer. There is an extensive disassembly involved in this procedure. All-in-One computers have much more in common with laptops than they do with traditional desktop computers.

  Honestly, if you want to do video processing and games... you should get a traditional desktop with enough CPU and GPU for these activities.

  Please click the White Star of KUDOS to show your appreciation

• Photosmart C7280 all-in-One with HP Premium Plus Photo A4 Semi Gloss paper

  For the past two years, I have been using the Photosmart C7280 all-in-one, with Premium Plus Satin A4 Matte Photo paper and have gotten excellent printing results.

  Now that this article is no longer available I just bought some suggested alternative, which is Premium Plus Semi Gloss; but I am surprised and very disappointed by lower printing results.

  Compared to the Matt satin results, they are very much less clear and the colors appear pale and lower.

  Has anyone had similar experiences and, if so, found a solution?

  Hello graham_jester

  It is up to you. In general, the solution is marked when a particular post has solved your problem or an appropriate workaround solution. In any event, I appreciate the gesture.

• I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print all programs except

  I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print to all programs except the HP Image Zone. It shows the right default printer. When I print a photo 4 x 6 prints only part, and it is slightly enlarged. My operating system is Windows XP. Do you need any other information? Thank you. Peggy

  Hi PeggyOlson,

  It is an older program used with your 2570. Try to download and install the new photo software from the link below.

  HP Photo Creations

  HP Photo creation FAQ

• Officejet 5610 All - in One with my IMac using OS x 10.9.

  Cannot save the pages scanned on my Officejet 5610 all-in-One with my IMac using OS x 10.9.  Worked well with 10.8.

  Thanks for your reply.  When I found that the same problem had been sent by others, I discovered the same advice. Used the procedure you described and solved the problem.

• can I use my C3180 all-in-one with windows 7?

  can I use my C33180 all-in-one with windows &?  and if yes how I have set up?

  Yes you can, you can download drivers from here

  Also, click Start and then right-click on computer and left click on properties to find out if you have 32 or 64 bit Windows 7.

• 2543 all-in-One printer: what ink need a purchase for 2543 all-in-one printer (model name: D3A80A) Please?

  What ink need a purchase for 2543 all-in-one printer (model name: D3A80A) Please?

  61 HP cartridges are a pretty popular current model, I expect it would be stored in most places that carry the cartridges.  I did a search at Walgreens, about 3/4 of them had 61 cartridges in stock at Houston.

• Trying to network Envy HP 4500 all in one with OSX 10.9.4

  First time installation of HP Envy 4500 all-in-one happening on Mac with os x 10.9.4.  However I can't get the printer to work with cable. HP instructions were re - insert the CD and follow the instructions in the "reconfiguration without cable" However, this was not an option on the CD, he just tried to repeat the installation.
  Configuration of device through my Mac came wit this message-'device unreachable. woreless network settings were downloaded successfully on your device.  However your mac could not locate the device on the network. »

  There is no point of me having the wireless option if it is necessary to have a cable connection.  Please can someone help me with this last step to equip themselves.  Thank you very much.

  Hi thanks for Jamieson, for getting back to me.  We have now resolved the issue - '' We '' being myself and mark of the HP support team.  I tried all methods mention you several times and uninstalled, re-installed updates 3 times on etc. before contacting the forum.
  Finally, we found that the software of the printer was responsible and don't not all parameters.   Mark used Remoting to clear the printer software and start again and now it works a treat.   On the negative side I lost 8 hours of my time, not wanting to not give up the printer when we realize now it was never going to work. On the rise, Mark has been absolutely fantastic to talk me through the process of correction and the end result is a satisfied customer.  I also subscribe to e-print, which will be extremely useful to me in my travels

  

• 700 - 500Z envy: you can use a HP Officejet J4580 all-in-One with a 700-500Z envy

  I just bought an Envy700-500Z. Very happy. But I was printing on a laptop Toshiba with a HP Officejet J4580 all-in-one printer. My question is can I use officejet j4580 on Envy with hpeprint?

  @Psst-007

  Welcome to the Community Forum of HP.

  The OfficeJet 4580 isn't an ePrint printer; You can use the HP ePrint Mobile App to print from your mobile to this printer when you are connected to the same local network:

  HP printers connected to the Web and cloud Services supported for HP printers

  -----------------------------------------------------------------------------

  To access the full range of functions ePrint, you need an ePrint printer.

  Reference:

  Add the printer device

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' Kudos on this post.

  Click on accept as Solution when my answer provides a fix or a workaround!

• OfficeJet Pro 8600 all-in-One connected as network printer loses connection

  In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

  After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

  1. Start Control Panel  connections network and Internet

  2. Choose "network connections."

  3. Right click on "connect to the Local network.

  4. Choose "Properties".

  5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

  6. Select the tab labeled 'Power Management'

  7. Uncheck the box "allow the computer to turn off this device to save power".

  8. Select the "Advanced" tab

  9. Select the entry "power saving Mode".

  10. If this entry is set to change 'On' to 'Off '.

  11. Select 'OK', and then close the windows that were opened

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• PSC 1315 all-in-One with Windows 7 (64), SP1, prints too high on the page.

  My printer prints too high on the page. Regardless of the printer or document settings, the first line prints at the top of the page. This problem is not present with Notepad, but appears with WordPad and Open Office Writer. How can I pay for this investment?

  Response to Shane_R:

  I spoke too soon. I think that I was not successfully download these drivers because I received messages that the original driver has not been installed. (Don't know why it worked once.)

  In any case, I found an old link to the HP site for my all-in-one model that provided a full hybrid software and driver download makeover. I installed it correctly and so far everything works better than before. Thanks for me toward the pilots initially.

  It comes to seventh year of my printer and second course of youth. Now maybe he'll go another seven.

• DeskJet 2050 all in one J510: installation HP deskjet 2050 all-in-one with windodws portable

  Hello

  Top of greaded for the new laptop that has windows 10 and can not get my printer to be seen.  When the printer is connected through the USB port, computer laptop just scan, load an application for wireless use won't see or interact with the printer as the device is not a wireless model, (only 5 years).  printer still works great on Windows 7 laptop, but the laptop keeps freezing as is the reasosn for the upgrade.

  Question is how to make the new laptop to use my printer?

  I still have the domain controller that came with it, but it will not work installation on the laptop W10.

  Help, please.

  Thank you

  Denise

  @ladyzq

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you did not, please install the software of full functionality for the printer.

  and / or

  • Start here: HP Print and Scan - Doctor help solve printer problems

  Printer, one of

  "Deskjet 2050 all in one J510 ' (5)

  Full software functionality (the printer program):

  Name of the file:

  DJ2050_J510_1313 - 1.exe

  (49.0 MB)

  Help, suggestions and examples:

  Install the full features software - printer

  Operating system recently migrated to Windows 10 and re - install the printer software:

   

  1. If you use a USB cable to connect the printer and the computer, disconnect the cable
  2. Create a Restore Point >
  3. Reinstall / update your PDF reader (Adobe Reader DC / Foxit)
  4. This works best if the updates of Windows (10) computer are up-to-date - check if you are unsure
  5. Update your drivers HP (or another computer of the seller) - printing software like updated drivers
  6. Open printer pilot site support Page >
  7. Download a new copy of the Full Feature software >
  8. Remove the printer from programs and features existing software / applications and features / all Apps / devices and printers >
  9. Shut down the computer > start and connect >
  10. Install the full feature software (find in your downloads folder > double-click the file) >
  11. Restart the computer and log in to complete the installation

  Article (s) of interest include:

  • Start here: HP Print and Scan - Doctor help solve printer problems
  • Preparation
  • Extras, tips and some Cool stuff > HP, Installation Help and Diagnostics information
  • Create a Restore Point
  • Remove the printing software (two parts)
  • Download and Installation
  • Integrated webserver (EWS)
  • 10 Windows updates (check)
  • Restart all
  • Analysis of the Options of program *

  ** Cool independent scan programs (thanks to greenturtle for links to HP extended Scan!)

  Reference:

  Options of the digitization program

  Sections of the document include:

  HP Extended Scan - Single, multiple scans, automatic framing!

  NAPS2 - not another scan PDF

  And others...

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• 27n190st Pavilion: Pavilion all-in-one with SSD option?

  Hello:

  27 all-in-one is expandable to a 500 GB solid State Drive? I know it's not expandable customizable Web site, but if I buy it can I update? I want to just make sure there is room and no other potential problems with an upgrade.

  Thank you.

  Dobe12 wrote:

  Hi old_geekster:

  I've owned a touch in the past. I work with pictures and as power to swipe from one photo to another. It is much easier to use a mouse. I love being able to pinch also enlarge the photos and text.  This makes a lot of sense.  I didn't want to be curious, just any other interested is the motivation for the purchase of a certain model of computer.  I agree.  I have a laptop HP game Omen.  It has a touch screen, a trackpad.  I use a mouse without a wire with her, too.  It is perfect for viewing photos and anything else.

  It is interesting that envy all in a series allows an upgrade to an SSD. Is there a difference with this series first to those vs the Pavilion?  I don't know why this is, except HP emits different models for all price ranges.

  If it is not expandable, I guess that I would buy a pc because I really like the idea of an SSD. A technician at HP would know?  This is your best option.  I would contact the Service HP customer for using the upgrade information before buy you.  This will ensure I hope you don't buy something that you don't like.

  Thank you

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• C410 Photosmart all-in-one with fax series problem

  My Photosmart Premium FAX e-ALL-IN-One c410 series does not receive faxes.  It is on the automatic response and the phone rings (with a fax signal), but it does not pick up. Can you help me? I was able to send a fax the other day, but before that was a little more difficult.  I ran the test fax several times and he said: it is spent.

  Hello

  Here is a document that will help you check your fax settings and solve your problem. Since you have already performed the fax test, you can go directly to the #2 Solution.

  http://support.HP.com/us-en/document/c01632148

  Good luck!!