E.M.P. 11122 to 11123 issue update: links in the workspace do not work

Similar Questions

• Flashed to update BIOS, now the fan is not working?

  I have a HP DV6226US and I have recently updated the BIOS to version F.2D. I am running vista 32 os. It is the version that is given for my computer model on the site of HP software and drivers. When I ran the update, I remember saying that he check the compatibility before the BIOS flash.

  Here's my question...

  Before the lightning used to fan run constantly with clearly different degrees of RPM. After the flash, the fan does not seem at all turns. It turned on once when I restarted the computer (right before you start loading vista). Other that that, I can not here one thing. However, I used HD Tune and a CPU monitor very simple to see what kind of weather the internal parts are running in. My HARD drive (WD 7200 RPM 320 GB Scorpio black) is running at constant c from 46 to 47. In the manufactures specifications, even under the 200 + GB scans loaded on it. The processor cores appear to be good inside factory card as well. I was wondering if anyone else has experienced this change in behavior of the fan due to the update of the BIOS, and if I should be concerned by the apparently lack of fan activity. I use this laptop for DJ and karaoke at intervals of 4 to 5 hours about 5 days a week and demand that it is not overheating. Can anyone shed some light on this. Thanks in advance.

  OK, since no one answered I came up with my own solution. So for anyone who did a search and comes up with this post, this is what how I solved my problem.

  I went back to the software HP and downloads page and read all versions of the BIOS updates. I found myself flashing version e.16 for several reasons.

  • It is close to the original version of the F.14 (who does not appear in the BIOS versions).
  • Other versions have been fixes for the problems that I had not lived with my laptop (HP DV6226us with a 30BB motherboard Quanta and processor Intel T2250)
  • E.16 added support for processors Intel Celeron M (which is not important in my application) and improves the performance of the system with a thermal function to update the CPU.

  Before the downgrade of F.2D to e.16, such as mentioned in previous posts, the CPU cores were running at a distance of 35 ° c - 55 ° c +. Not out of reach, but warmer than usual. The temperature of the HARD drive has been ranging from 42 ° c - 61. 61 was reached in the execution of an analysis, and it is out of the Max Temp. Beach of the HARD disk that is 60 ° c. During my DJ/KJ shows the disk HARD temp. would more 53ºC - 58ºC and usually take around with a small fluctuation 54ºC. To me this seemed very high from what I was used to in the past before updating the BIOS F.2D.

  Since the downgrade to e.16, my CPU temp. has varied between 0 ° c - 35 ° c and is usually at 20 ° c. The HARD drive has retreated down to 42 ° c - 45 ° c. During my DJ/KJ show the temp. Hit 44ºC and constant which took place. It is a huge improvement. The fan works just like in the past and is not blowing hot super air when it works.

  Fixed a problem! Hope this helps someone else who is facing a similar problem.

• Curve of blackBerry Smartphones 9320 - updated software, now the phone does not work

  Hi all

  Hope you can help. I plugged my BB Curve to my computer to transfer music files. The desktop software open, and after backing up my files, I got the message that a newer version of the software is available for my phone. So I clicked to update the software, and the update started. He got to this point:

  

  From there on, all my BB's is set to zero, then shows a corrupt legal opinion, then displays "Reset Error Code 606"

  Please help me to get my phone working again - I left the screen update running, in the hope it will make restoring the update program and my BB is still connected.

  Hi BillJ,

  Thank you very much - it is back and working now.

  I lost all the downloaded applications and the world of BB, but everything else is there, and it works.

  Thanks again.

• Photoshop cs5 update failed, now the settings do not work

  Adobe photoshop cs5.5 update has failed. Now the adjustment layers do not work.

  Help > updates feature in CS5 and previously no longer works. You must download and install the updates manually.

• PS CC update failed and the application will not work

  I'm on a mac (mavericks, updated)

  iMac late 2013

  CC update starts downloading but stop at level 55-60% with error update failed.

  I really don't care about the new features and tried to use the existing application... no joy at all... nothing... my worst fears about this idea of stupid auto update subscription are are produced.

  Adobe chat is saved llike mad...

  Anyone know how to restart the application on a mac?

  Thank you

  Tom

  Jeff-

  After a short wait, I finally received a phone call from an adobe call center and resolved the issue. It took almost 2 hours on the phone.

  The final resolution was uninstall and use the tool cleaning of adobe to remove all traces of the original install PS, then reinstall the application.

  Not enough, but back up running.

  Thanks for your comments.

  See you soon,.

  Tom

• updated itunes,-, outlook, for, icloud, would not work, windows, outlook 10, 2016

  updated itunes,-, outlook, for, icloud, would not work, windows, outlook 10, 2016

  Error: 0 x 80040604: upward / POST: conflicts

  [Error: 0 x 80040604: Up/HdlPOSTr[p06-caldav.icloud.com/412/0#16/83]

  See if it might help - Error: 0 x 80040604: Up/POST: conflict

• iPhone 5: objective of the camera does not work after update iOS 10

  Hello everyone.

  I swear to you that I have no idea how do... after a few weeks since the release of iOS 10, yesterday I force myself to be updated - the situation with iOS 9.3.2 became crash and unbearable lag every second. The fact is that I update, I like the system and use it for a few hours. Check the camera this morning, I see that the focus does not work. Now I also see AE / AF Lock, light changes whenever I tap on one side or the other, but not to focus. Not even close or far, nothing to do. I have not tried in the settings to do a full erase, I had no way to restore it since I do not have a backup.

  I tried to clean the lens - already cleaned, I tried to give him a few small nicks and follow the many guides online. I rebooted and everything done. Nothing has changed.

  The last photo was taken last night and has been developed. So I don't think it's a hardware problem and if so, how has it happened? A few hours ago the iPhone is fallen, but tell me if it makes sense. If it's a software problem, what could I do?

  I would avoid the assistance. It is a used iPhone, never jailbroken. I don't have a lot of confidence with the help, in 6 or 7 years he never went - iPhone always bought used and always worked very well.

  PS: I have no way to get into DFU, as iTunes does not see my iPhone. Up to iOS 9 that I had no problem even if I had enough of the device with the cable isn't original, but barely now lets load ("This accessory may not work").

  Hello

  I also have an iPhone 5 and I tested the question and mine is fine, how bad was the fall that you mentioned? Sometimes problems can come and go. Also try to reformulate your device.

  After this answer please.

  Thank you Will

• My update of the software does not work

  My update of the software does not work and I can't return to the main he keeps on telling me to restart the computer and then go through the software update settings, then it ends by does not and then it tells me to restart and restart and restart again and again

  What updates you trying to install?

• the trackpad is not working properly after the update to 10.11.4

  Hello

  I've updated my mac pro to the latest OS. However, the trackpad does not work correctly. Sometimes he strives to move the arrow but double click, drag, and all other actions do not work properly.

  Can someone help me out here? Is there a way to reactivate the trackpad or update driver for the trackpad.

  The trackpad is build-in bluetooth no one.

  Thank you

  There are two main troubleshooting steps I suggest to complete to start troubleshooting your touchpad is not responding. These steps are reset of memory NVRAM and the SMC on your Mac and the instructions for each can be found in the articles below.

  How to reset the NVRAM on your Mac - Apple Support

  Reset the management system (SCM) controller on your Mac - Apple Support

• A few days ago I installed some updates and since then, Norton does not work. It shows a red exclamation point.

  Original title: norton malfunction

  A few days ago I installed some updates and since then, Norton does not work. It shows a red exclamation point.
  Help, please.

  Contact Norton support. It's their product.

• Update my wireless network device does not work after installation of Software Distribution Service 3.0

  After the installation of Software Distribution Service 3.0 update my wireless network camera does not work how do I uninstall Software Distribution Service 3.0

  How did you receive the update?

  Was it via Windows Update or Microsoft Update?

  Before the changes are made to your computer, the system restore points are made. This is so that you can go back in case an update causes problems.

  Follow these steps:

  1. click on the Start button

  2. click on accessories

  3. click on system tools

  4. click on system restore

  5. click on next

  6. in the calendar that appears, select the one which refers to Software Distribution Service 3.0 and click Next

  After the collection of certain data, the computer will restart, and the update will be gone.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't check the updates, because he said that "the service does not work."

  I can't check the updates, because he said that "the service does not work."

  Error: Windows Update cannot check the updates, because the Service is not running
  http://support.Microsoft.com/kb/2730071

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• Get the error the Service does not work when you try to update

  Original title: Dell Inspiron 1545 model

  My Labtop wife; the automatic update is enabled; but will NOT be updated. When I try to update; There are NO error codes. After trying to update. The computer

  addresses by specifying THE SERVICE IS DO NOT running. You must restart; also the F8 key does not work.

  Hello

  1. What is the error message right on the service does not work?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check.

  The problems with the installation of updates (Windows Vista)

  Hope this information helps.

• Update error Code 8024200B & unable to update Wireless Keyboard 800 - keyboard does not work

  I have win7 pro 32-bit. Some updates fail.
  Currently updates for keyboard and mouse USB MS they return the error Code 8024200 B, for which I am unable to find an explanation.
  It is a problem that I bought a Wireless Desktop 800, and the keyboard does not work.
  I tested the material on my Win7 32 bit system and it works fine.
  The device is detected and enabled, etc. of thin batteries
  There is no drivers for 800 system, so I was hoping that the update would solve the problem, if I could install it.
  Any ideas on the error code, or how to solve the problem of keyboard?
  Thank you
  * Problem solved. These updates succeeded at the 5th attempt - and I was able to install 'Microsoft mouse & keyboard Centre' that got my keyboard working *.
  * I'll leave the rest of my response below in case it would be useful to all. **

  Thanks for the reply Fazil.

  1. There is no way to 'connect' from the keyboard to the computer. I insert the usb bluetooth dongle and it works for the mouse but not the keyboard.
  2. the updates are the two option, without numbers KB:
  -Other hardware - Microsoft Hardware Microsoft USB keyboard
  Mouse Microsoft USB - other hardware - Microsoft Hardware
  3 update error message for both simply put the Code 8024200 B. There seems to be no documentation for this error code.
  All security updates I ran & updated ok.
  I tried various things - stop programs anti-virus etc.
  4. This is the first time I tried to run the mouse wireless 800 & keyboard on this PC. I checked on my other laptop running exactly the same OS and that's fine, this isn't a hardware problem.
  I tried fixit, who found nothing wrong.
  In Device Manager, it shows the two devices (keyboard and mouse) twice, as on the other laptop.
  Bluetooth > open settings Options are set to "enabled" and in the material it shows "HP Integrated Bluetooth Module" and "Microsoft Bluetooth Enumerator.