E-mail test fail

I have WVC54GCA camera. I've set up motion detection, but the e-mail test fails every time. I have three e-mail addresses. I have send to two and use them as sender. I tried all three as the sender, but no combination works. Any advice?

Well, contact your ISP to check the SMTP Protocol.

Tags: Linksys Products

Similar Questions

  • Start DST short Test failed, cannot start - data recovery

    Hello!

    A week ago, I posted the message that - at the start - I get a blue screen and the diagnostic utility says that start DST short Test failed...

    I was told that the bad far developed - unfortunately in these square where some files needed to start...

    There is, however, always a guarantee

    I installed the HARD drive in an external enclosure, so I already transferred my files, screensavers & fonts and so on on another HARD drive - well. But one thing that is still missing EMAILS. E-mail messages that are in Outlook Express as well as the different accounts that I use (Finally, I still not know the settings, but I would simply import the account to my new installation)...

    Is THERE ANY CHANCE to get these EMAILS (at least and go as far as accounts) WITHOUT booting the system with this very HARD (which currently doesn't)... where these mails are stored? or should I try to get windows working again to access Outlook & emails?


  • Cannot get mail that failed to connect to my server

    Cannot get mail

    Failed to connect to my server

    Hello parkspa,

    Thank you for using communities Support from Apple. I know have a problem with Mail on your iPhone, it's not what you expect. The good news is the next article will be useful for troubleshooting and solving your problem and get email working again on your iPhone:

    Get help with Mail on iPhone, iPad and iPod touch

    See you soon!

  • SMART short test failed

    Under hardware Maintence diagnosed and he tells me that the SMART short Test failed what it means and how to fix this

    I think that trying to DEFRAGMENT a hard disk 'default' is the wrong thing to do.

    Compare to the conduct of a dirt road with Bald tires - while the Bald tires may be OK on a dry, paved, road between them work "hard" will result in a failure of the tire.

    Similarly, many files on the hard drive when it is expected to be soon to fail, is also a bad idea.

    Any small computer boss store can sell you a hard drive brand new and may try to "clone" of 100% of the hard drive of the 'old' drive on 'new' disk

    Price?  It depends on the capacity (250 GB? 500 GB? 1000GO? 2000 GB?).

    About US $100, you will have a new disk drive with a capacity greater than your current drive.

    Add $50 to $100 US for the technician:

    Open the computer case,

    * Check the physical size and the capacity of the old-disk drive, to recommend a "compatible" replacement

    * Fix temporarily the new discs,

    * run the software "-disk cloning."

    * delete the old records (and he will give it to you, so that you can literally hammer it, so that no one will ever be able to read one of your folders – think 'security'),

    * connect permanently the new disks.

    * close the computer case,

    * test it.

    It also depends on the "age" of your computer.

    If it is still running Windows XP or Windows Vista, it will be over ten years - REPLACE a computer of this type.

    rather than spend more than US $150 to keep until something else died of "old age".

  • Satellite Pro A10 comes with: error IDE #0, PXE-E61media test failed

    I recently bought a used Toshiba Satellite pro A10.
    When I received it, it was working and being a noob I tried to install a network card and create a wireless network with my desktop using XP when it did not work I plugged my ethernet (from my desktop) cable on the laptop and flashed upwards with a small number can not? dll etc etc.

    Now I unplugged the ethernet cable and when I try to boot my laptop it comes up with:

    "ERROR IDE #0".
    Intel (r) bootagent, FE v4.1.09
    Copyright 1997-2002 Intel Corp.
    PXE - E61: Media test failed, check that the cables
    PXE - M0F: Exit Intel Boot Agent
    Insert system disk in drive
    Press any key ".

    HI Tom,

    The error message that you receive indicate that your laptop is trying to start the connection to the LAN rather than from his own hard drive or a CD-ROM. I suggest that you verify that the boot sequence is specified correctly in your BIOS, or alternatively, you can press F12 during your market and you should get the boot device menu sequence appears so that you can specify that you want to boot from your hard drive.

    Kind regards

  • Pavilion p6330f PC: SMART Test: SMART short Self Test FAILED

    I had so many problems with this computer. Whenever I have turn it off then go turn back will go to Recovery Manager. I did run the computer health check and did the basic test and Test drive both hard say Test INTELLIGENT: SMART short Self Test FAILED. What does that mean?!

    Hello

    It simply means: the HARD drive is about to die. Please save all your data if you could and be prepared to replace the HARD drive. Is your machine still under warranty? If so, please contact HP for replacement

    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    Kind regards.

  • Pavilion Memory Test failed., ID 64W662-5066J2-XD7XGK-400V03 failure

    Crash... The BIOS memory test passes, but the HP Diagnostic memory test fails with the ID 64W662-5066J2-XD7XGK-400V03 failure.  Product ID VM298UA #ABA.  Any ideas?

    Hello

    Try the following.

    First, download the Memtest Image file (.) (ISO) on the following link.

    http://www.memtest.org/download/4.20/Memtest86+-4.20.ISO.zip

    It is a zipped file, if you do not have an extraction utility installed, download and install 7-Zip.  Please note that If you have a 64-bit installation, download and install the Installer x 64 64-bit .msi on the link below.

    http://www.7-zip.org/

    Then, right-click on the zipped file, select Extract 7 - Zip, select the files and then click Ok.  Open the newly extracted folder to find the Memtest Image.

    Now, you will need to use an application like ImgBurn to burn the ISO correctly on a blank CD - a guide on the use of ImgBurn to write that an ISO on a disc is here.

    When you created the CD, shut down the laptop.  Tap the escape key when you rewind to enter the Boot Menu.  Insert the Memtest CD.  Select 'Options of Boot' (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER to boot from the disc.

    At least 3-4 passes and see if errors are found.

    Kind regards

    DP - K

  • Pavilion 2206TX: hard drive DST short test failed

    Hard drive DST short test failed.

    For a few days, my laptop is not starting.

    Run the diagnostics showed "hard drive DST short test failed.

    I removed the hard drive [brand Toshiba] and connected as an external drive to a Mac.

    I am able to access your hard drive and copy some content from it. So, it looks like a problem with the hard drive.

    Is this a problem with the connection of harrdisk to the motherboard or with the hard drive itself?

    Help, please.

    Hello

    Yes, you can use your friend recovery media in your. It should work.

    I'm not able to find a recovery media for your model of third-party vendors too.

    No, you can't create USB recovery by plugging the old drive as external references to another PC. You have to use HP application recovery manager supplied with your laptop and create a set. I think that you will not be able to do from a failing drive.

    Concerning

    Visruth

  • Memory test failed w / Kingston 4 GB

    I have a HP G42 - 461LA Notebook PC, and I added a 4 GB Kingston Ram memory (KVR1333D3S9 / 4g). I started to notice my laptop has been slow and has decided to conduct a Test of memory of the HP Diagnostic tools (F2).

    It fails with this failure ID: U3439W-5HW70M-XD002K-40HU03

    When I removed the memory stick and tried again he passed successfully.

    The strange thing is that when it is installed it is recognized and it seems like it should work, but it is slow at the opening in a few tabs in the browser (most audio glitches), and the test fails.

    Hello

    ID failure indicates that there is a problem with a memory, and must be replaced. This should be the cause of the issue of the slow-running also.

    I suppose that there are two locations of memory for your computer.

    You can try a memory at once and run the test or check the performance of the computer with a memory. Then, you will be able to isolate the faulty memory.

    Sometimes it might be also the memory slot... so try a memory at a time in each slot in interchanging the. That will help you know if there is a problem with one of the slot.

    You can refer to this link...

    The upgrade (RAM RAM)

    I hope this helps...

  • Compaq presario v6000 v6409tu disk hard bios self-test fail

    Hello

    Windows xp no my pc compaq v6000 not starting and bluescreen showed a couple of times. I ran the BIOS (phoenix) disk hard diagnosis and the test failed. When I opened my HDD I noticed green rust as deposits into the connector on the hard drive. After cleaning with a brush, computer loaded XP successfully. But an hour later, while I was surfing in mozilla suddenly the mouse pointer started late and showed computer blue screen saying that windows has been closed down to prevent damage.

    I would be grateful if someone can tell me if it's a software problem or hard drive error. If I need to replace my hard drive, what are my options, for example. rpm, capacity, provider? Thank you.

    The only way you could have rusted copper into the connector on the hard drive is if liquid got in there so I am reluctant to try to speculate how much damage has been done. I remove the hard drive and connect it to the outside to another computer and run chkdsk on it to see if the drive itself is bad. As long as there is a problem on the part of connector and the interface with the motherboard cannot really trust the onboard hard drive Diagnostics. You could also get an own another new hard drive adapter.

    http://www.eBay.com/ITM/new-Compaq-Presario-C700-F500-F700-V6000-SATA-laptop-hard-drive-connector-/161297513053?PT=US_Drive_Bay_Caddies & Hash = item258e14ba5d

    If it does not turn on the hard drive is bad, you can replace it with any laptop SATA drive no more than 9.5 mm thick.

    http://www.Newegg.com/product/product.aspx?item=N82E16822145587

    Above is a good thing. It is slim (7mm) but it will still go into the caddy and connect to the motherboard with the connecting piece. If the hard drive itself is always good, and you replace the connector piece but he always bluescreens, so I would not spend money on a new hard drive. I would say that there was damage to the motherboard.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Hard drive test failed in the HP pavilion dm4 1041tx and HDD 0303 fast 1

    starting problem in my laptop,

    showing hard disk test failed...

    Error Msg: "fast hard disk 1"(0303) "

    Hello

    303 error seems to indicate that the drive is defective and must be replaced - it is also compatible with your startup problem.

    If your laptop is still under warranty, contact HP and arrange for the disc replaced.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

    Kind regards

    DP - K

  • Operating system not found on Equium - PXE - E61:Media test failed

    Hi all

    My daughter has a computer satellite laptop running XP.
    However, the system does not start and the following messages:

    PXE - test failed - check the cable for E61:Media
    PXE - M0F: output of the PXE Rom
    Operating system not found

    We do not have a disk operating system.

    What is the problem and how can I do for her?

    Hello

    For me, it seems that the HARD drive is dead and the laptop can not find the installed operating system.
    In this case, he tried to boot from different sources and finally LAN.
    But it does not and therefore, you get the PXE - E61:Media test failure error message.

    In my opinion, the HARD disk needs to be replaced and the operating system must be installed again.

    See you soon

  • Memory test failed

    Hello

    I use a laptop HP 1000. The default ram was 2GB but I added another 4 GB module in it. My laptop works quite normal, but it gives me the blue screen of death by practicing a particular game (League of Legends). I have no other than error, and it works fine. I decided to test my memory to the HP support (by pressing F2). I got the error of test with some ID of product failure.

    So I ran Memtest86, there was no error proves Memtest86 in 1 pass. So I want to know that why HP test failed and Memtest86 gave me no errors.

    OPERATING SYSTEM: WINDOWS 7 64-BIT

    Thank you

    Ahmad Salmat

    Concerning
    Ahmad Salmat

    I would say that confirms that the RAM module is defective.  This test is performed on the single 4 GB stick or the also installed 2GB stick?  If it was with the one 4 GB stick, then I would say that it is more than enough evidence to justify the Exchange store.  There is not much I can do from this end with a third of RAM.  You will need to contact the point of original purchase for an Exchange and explain tests memory failed (Memtest86 and HP).

    Let me know what happens.

  • SMART extended self test failed

    Is this what can I do to repair my disk hard when diagnostics the system returns this error message?

    The read element of the test failed (error code: HD521-3W)

    Is there available utilities to diagnose the problems of internet connection on HP?

    Thanks for any help anyone can give me.

    Michele

    Unfortunately, the result of this test tells you that the hard drive has failed, you will need to replace the hard drive.  You can save your data by installing the drive on another PC using one of the spare hard drive SATA connections, if it is a SATA or IDE secondary connector if the drive is IDE and try to read the disc in windows, but it depends on how much the failure of hard drive is. The reader may not even be readable.

  • the start-up dv7-7259nr test failed

    My dv7-7259nr startup test failed.

    Here are the results of the tests:

    Verification of the processor: past

    memory test: past

    drive hard smart check: past

    hard drive short DST: failure

    Failure ID: GU2AKQ - 6N26P4-QFPJW1-60XM03

    Product ID: C6N75UA #ABA

    Hard drive 1

    For more information, go here.

    I can't find it.

    Help.

    Thank you!

    Hello

    The short drive Self Test (DST) failure error code would indicate that hard is defective and must be replaced.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

    Kind regards

    DP - K

Maybe you are looking for