E/s and error 1625 errors

Similar Questions

• Error 1074000000 has occurred in a place not identified and error 1073807339 occurred at VISA read

  I worked with it for a few weeks. I am a student doing research for a professor and I'm new to LabVIEW (about a month).

  We calculate impedance in an object with a pulsar. The pulsar will pass through an area of resistance before and after the charge for the calculation of v1 and v2. This will help us to find the current which will help us to find the impedance of the load. In this case, the charge will be a potato. The pulsar will send piulses so we want the program to record the waveform on the trigger.  We have v2 and v1 of two channels. We must record the results of v1 and v2, more than an hour. In addition, if v1, v2, and timestamp are in the same excel file then our lives would be easier. A waveform by file.

  -TL; DR Two channels to be recorded with a timestamp

  The oscilloscope is the WaveRunner LeCroy_64xi.

  We use LabVIEW 2014 SP1.

  I connect to an oscilloscope via an ethernet connection. The connection should not be the problem, but I connected the oscilloscope using NOR-MAX. The oscilloscope is an ACIP device with a remote system, passport and alias. The instructions step by step are http://forums.ni.com/ni/attachments/ni/140/43120/1/VICP-NI-MAX.doc.

  After you connect the oscilloscope, we took a sample program from the driver and changed that to do what we want. We got a few results. FetchWaveform strives to get the shape of wave, but after four or so waveforms, it gives two errors. We tried to add delays, loops and run the program once at a time. I'm willing to start one of these well. This worked well enough at some point, but I think it was because we had a few labVIEW programs open and he was capture the waveform at every second. I think it was because the LABVIEW program has been slowed by the natural delay. It was exactly what we were looking for, but mistakes don't happen often. After the computer restarts and the program, the waveforms are extremely fast registered and errors occur. It is not consistent and we do not know how to register only when the waveform is triggered. Trouble downloading my code here.

  Moving this, we tried ReadWaveform. For some reason, we cannot get readWaveform to work. It does not display the waveform and gives the second error or timeout error. We understand why he will not really connect with the oscilloscope. I do not change one of the examples that use readWaveform for this problem.

  I'll be here tomorrow, but I'm almost done for today. If there is anything I missed, I'm sorry and I'll it download tomorrow. I'm out of ideas. To message me please and thank you very much for your effort.

  Hi Tnorm007,

  I appreciate the level of detail you have included; It seems that there are a lot of things here.  However, it still seems to be inconsistencies and ambiguities in the errors that you receive.  You are able to get a consistent result by running the code you provided?

  For example, if you run the code once, it works as you want?

  If you press run is once again, it works the way you want?  (I assume that you configure the writing on a measure VI file to add the data to the current file?)

  Does it fail after a number of iterations, or it does not depend on the speed at which it runs, back to back?  Which two errors are thrown into this case?

  Also, just a general tip, if you want to receive signals continuously, you want only portions of reading/writing the code of the loop (and initialize/close the task only once), rather than put all the code in a large loop or by pressing the button several times run

  Best,

  David Randolph

  Engineering applications

  National Instruments

  www.NI.com/support

• Why is there a warning and error in administrative events in Event Viewer?

  When I open the event viewer, and then the chip on the custom view and then double-click Administrative events there are warnings and errors in this case why that is and what I need to fix it or leave it alone.

  [Moved from comments]

  Please provide us with your administrative Event Viewer logs by following these steps:

  Click on Start Menu
  Type eventvwr in the find programs and files (do not hit enter)
  Click with the right button on eventvwr.exe and click Run as administrator
  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download .zip here (if you can) to skydrive or a file sharing service

• Error code = 16600 and error code = 17110

  Error code = 16610 and error code = 17110

  The child's account cannot check e-mail.

  Your account is not ready.
  It seems that your mother has finished setting up parental control for your account settings. Click "Access the parental control settings" to complete the process and access your account.

  Hotmail Setup incomplete.

  Sorry there was a problem to apply your parental control settings to your Hotmail account. Try again later, go to your Hotmail account and follow the instructions.

  Parent cannot delete the account:

  Colton: Sorry, the service is not available now. Please try again later. Error code = 17110.

  Colton: Your child Hotmail can not change immediately. We can send you a link to change the Hotmail settings, or you can try again later. Error code = 16600.

  Family safety is NOT installed.

  Primary school/Parent = account * address email is removed from the privacy *

  Child account = * address email is removed from the privacy *

  Does not work below:

  When you remove your child from the parental control, your child's Hotmail settings could not update. We are sorry for this topic.

  Update your child's Hotmail settings:

  1. ask to connect with their Microsoft account.

  2. ask to go to https://familysafety.microsoft.com/krl/hmnotify.aspx?p=OmaCuA3IIiM8WtcicpmFoCHjiR6rsa1 * oDgqRar4GKA6vMBO % 5EsudS % % 5EXf3ZQHYe 5Ep and follow the instructions on the screen.

  If your child cannot always use Hotmail, please wait a few minutes and try again.

  Thank you for using parental controls.

  Hello

  Please ensure that you use the latest version of the parental controls of Windows (16.4.3505.0912) for the child's computer. You can download the latest version in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-home

  Please let us know if the problem persists after you have installed the client.

  Thank you!

• The caution icon appears on the status bar, and error on this webpage, page States and it may not work properly.

  Original title: Error on the page with the warning icon

  The caution icon appears on the status bar, and the page shows error and error on this Web page might work incorrectly and script on the page error

  Hello

  1. what operating system is installed on the computer?

  2. do you use the Internet Explorer browser to surf the internet? If so, which version?

  3. with what Web page, you receive this error message?

  4 does happen with a particular Web page or it occurs with other webpages as well?

  Follow the article mentioned below, if you use the Internet Explorer browser:

  How to fix script errors in Internet Explorer on Windows computers:

  http://support.Microsoft.com/kb/308260

• Hello. I repeated the BSOD is since I've owned this computer. I'm tired of trial and error.

  Hello. I had repeated BSOD (Blue Screen of Death) since I've owned this computer.

  Product: HP TouchSmart 300-1017 PC Desktop

  Product # NY604AA-ABA; [Personal information]

  W7/64.

  "DRIVER_POWER_STATE_FAILURE.

  My last HP support ticket number is 805 154 7061.

  These BSOD occur only when the machine is in

  STANDBY or hibernation,

  NEVER when it is active. NEVER.

  I called support 5 - 6 times and spent hours trying to get the problem solved.

  They took control and made things such as the update of the BIOS, the DL updates, etc., but the problem persists. Then on a reminder 24 hours later, they ask if everything is OK.

  WELL, WHAT * IS * OK UNTIL THE NEXT BSOD.

  These efforts have NO analysis as to what could be the cause of the problem.

  I'm tired of trial and error approaches, involving mainly conjecture.

  I have right to more effort has been to resolve this problem.

  Information about the BSOD settings on the causes of the problem are listed below.

  The code is always "Stop 0x0000009F.» Track dump parameters:

  ==============================================

  Dump file
  050711-19000 - 01.dmp

  Time of the accident
  07/05/2011 09:47:02

  Bug control chain
  DRIVER_POWER_STATE_FAILURE

  Bug check code
  0x0000009F

  Parameter 1
  00000000'00000003

  Parameter 2
  fffffa80'05c0ca00

  Parameter 3
  fffff800'00ba2748

  Parameter 4
  fffffa80'04472180

  Caused by the driver
  Ntoskrnl.exe

  Caused by address
  Ntoskrnl.exe + 80640

  Description of the file
  NT kernel & system

  Name of the product
  Microsoft® Windows® operating system

  Company
  Microsoft Corporation

  Version of the file
  6.1.7601.17592 (win7sp1_gdr.110408 - 1631)

  Processor
  x 64

  Full path
  C:\Windows\minidump\050711-19000-01.dmp

  ==============================================

  This requires an ANALYST determine the CAUSE of this recurring problem.

  There may be a solution to the MS Support Article ID: 977186 - "error message when you try to resume a Windows 7-based or Windows Server 2008 R2 computer for.

  "hibernation:" Stop 0x0000009F "

  He said: "to resolve this problem immediately, contact Microsoft Customer Support Services to obtain the fix. For a complete list of the Support Services client Microsoft

  phone numbers and information on the costs involved, see the Microsoft Web site at the following address:
  http://support.Microsoft.com/contactus/?WS=support (http://support.microsoft.com/contactus/?ws=support).

  I think that MS wants to charge a person for download. But I think any charges should be covered by HP, under my support contract.

  I want a permanent solution so that I can keep from losing my job.

  Tom Jones, Burbank, CA

  Ox9F errors are pilot errors.   Often they are solved by updating the graphics driver, but it could be any driver.  Sometimes something wrong in the system can cause a problem to another driver - they can be very difficult to solve.

  I saw a document on the Microsoft Web site that may apply - I might try what it says and see if that makes a difference.   http://support.Microsoft.com/kb/982091

  Also - make sure that you have updated the graphics and TV tuner driver (and everything that needs to be updated) - there were a few difficulties for crashes and blue screens in some of them.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=da&sw_lang=&product=4007366#n142

  -DM (an employee of HP long)

• Windows Update error 663 and error 64 c

  I tried to install, and the computer tries repeatedly to install these updates, but not luck!  The security of Microsoft .NET Framework 1.1 SP and update for microsoft Silverlight, it lasts for months now!

  * original title - 663 error and error 64 c... This lasts for a few months now and can never get facilities to work... *.

  Hello Tina Storle,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. What is the number KB for updates failed?

  4. are you able to install some other updates on the computer?

  I suggest that you manually download and install updates, check if it works.

  View update history to know which update is not installing.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.

  http://www.Microsoft.com/downloads/en/default.aspx

  If the previous step fails, then see the below article to Microsoft for repair. NETFramework on the computer and check if it works.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  http://support.Microsoft.com/kb/923100

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update_dt000 Windows and error code oX80072efe

  Seven days ago (15/11/2010), I am unable to check the updates of Windows. I get the following message: Windows Update_dt000 and error code 80072efe. I can't update the my virus definitions, malware and software Microsoft Essentials spies either. I scanned my computer with Microsoft Security Essentials and McAfee, and no viruses or malware were detected. * I downloaded manually the latest definitions to Microsoft Security on 11/22/2010. Even after the last definitions of installation, I was unable to automatically check for updates. Help, please!

  Hello

  A rootkit has been known to cause this problem.

  TDsskiller (Rootkit removal tool)
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Then, restart and check the updates.

  To search for other malware use this scanner:

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ==================================================================

  If necessary:

  Run 1 SFC

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  ------------------------------------------------------

  Try this: (it is Advanced B method in the Article below)

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  At the prompt, type or copy and paste:

  netsh winhttp reset proxy

  (Press enter)

  See if the update works now.

  --------------

  Then check out this article:

  You may experience some temporary connection errors when you use Windows Update or Microsoft
  Update to install updates<-- check this="">
  http://support.Microsoft.com/kb/836941

  Do these two and try updates

  Description of the update tool of the system for Windows Vista, Windows Server 2008, for Windows
  Server 2008 R2 Release Candidate for Windows 7 Release Candidate
  http://support.Microsoft.com/kb/947821/

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  =============================================

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied.

  Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?

  Hello

  You are unable to download the updates?

  Try the following steps to resolve the problem:

  Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.

  Check out these links:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
  your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
  connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958052

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update fault of maintains and shows 80070643 and error codes A 80071, 91

  I keep trying to update windows rum for the "Security Update for Windows 7 for x 64 systems" and similar updates, but they keep failing to update and display 80070643 and error codes A 80071, 91. Troubleshooting is not helping me to solve it. Help, please.

  Sean1420,
  You can download the update on your computer and then install it directly from there.  I would say that the execution of a clean boot before you perform the installation.  Post back with the Info requested PA wear and results trying to manually install the update.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code: 0 x 80246008 error Code: 0 x 80246007, error Code: 0 x 80200010 and error Code: 0 x 80246002 can not install updates in the Windows XP computer.

  Original title: window update problem.

  Error code: 80246008 error Code 0 x: 0 x 80246007, error Code: 0 x 80200010 and error Code: 0 x 80246002 what its means? And how to solve this problem to?

  (merged thread)

  Hello

  Did you do any hardware changes or software on your computer before this problem?

  You can follow these links & check if it helps:

  You may receive an error message that contains the "0x8DDD0018" code or the code '0 x 80246008' when you try to download updates from the Microsoft Windows Update Web site or from the Microsoft Update Website.

  When you try to install the updates on the Windows Update Web site or the Microsoft Update Web site, you may receive a "0 x 80246007" error code

  You receive the error 0 x 80200010 when you try to use the Windows Update Web site or the Microsoft Update Web site to install the updates

  You receive an error code "0 x 80246002" when you use Windows Update or Microsoft Update Web sites to install updates

  Hope the helps of information.

• Damages and errors: need to recover Windows 7 on dv6-3231nr

  Hello people! Hoping I can get some tips for fixing this laptop - it is a mess!

  I have a laptop dv6-3231nr out of warranty and has a damaged screen. Has been trampled or abandoned. Damage at the bottom left of the screen. I can do some things on the screen when it is running.

  Unforunately it will not display the video on an external monitor using the VGA connection. I also tried the HDMI to view video on my TV and the TV displays the data of 'recovery' as it new, something has been connected, but he could not show the video using this connection as well.

  Laptop starts at the BIOS and the test in BIOS hard drive error checking was able to finish even if I couldn't see what options and errors I had (all I could do was what he finished). Windows does not load and I get a blue screen error message with an error code that I can't completely make out because of damage to the screen and restarting the laptop just after error appears.

  I don't have the original Windows HP recovery disk. I know I could probably order from HP, but I did not how much they cost. I couldn't find a link to order.

  So, what do you think? The laptop likely there internal damage to the motherboard that prevents it from display external video via VGA/HDMI connections or would that be a software problem that would be fixed if I had to recover the operating system? In addition, how the HP Recovery/Windows 7 disc would cost me?

  Thanks in advance for your help.

  You can order your software/driver page HERE recovery media they are usually around $17.

  You can also try the hard drive partition recovery tapping away to the F11 key, immediately after switching on. Not sure if you could get through the options here with visibility of the small screen.

  You can also try the trick HERE by DavidPK burn a dvd of Windows 7. Yet once not sure how well would mean you through a facility complete with retail disk and damaged screen.

• When I start my computer, I get and Error Message (InfoCenter.exe - Application error)

  When I start my computer, I get and Error Message (InfoCenter.exe - Application error) that someone knows what this means and why I make it?

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same error occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  I suggest you try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Check if that helps.

• I can't send emails or Photos. I'm getting error 4202 for Hotmail and error OX800CCCOE for Live Mail and photo gallery

  I can't send emails or Photos.  I'm getting error 4202 for Hotmail and error OX800CCCOE for Live Mail and photo gallery

  Hello Natou41,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Error starting and error .exe

  Hi, the problem I've seen with is when I logged in, the startup is long to load... When you start the charge, nothing appears. Only my desktop background appear with no icons or anything on this subject. I need to press CTRL + ALT + DELETE to go to Task Manager, then click on file and run msconfig and Configuration system is displayed and what I do is I clicked on the tool tab and the launch of the Network Diagnostics. After launching my windows appear, but there is an error Rundll32.exe application that I don't know what is happening and I can't click on any application. It does not even show my Netgear. This is why I can't connect to internet. There is no evidence that when I clicked on them. Now, I'm using my laptop to use internet. There is also an errors on cmd.exe, expand.exe. I can't open a command prompt, because it says that there is error on cmd.exe and I don't know what's happening. When I clicked on my McAffee, nothing shows that what I said earlier. I clicked on all the apps and it it shows nothing. I also try and click on this the system restore on the Configuration of the system and it seems that nothing, I don't know what is happening. I also support the all my startup and didn't show when I restart my pc. I also chose the selective startup on the general tab, and I check all of them. I want my pc to be back to normal. Also, when I clicked on the control panel and choose something like user accounts and im trying to change something and error comes out it is the Application Rundll32.exe error. It happens to every thing on that I clicked Rundll32.exe appears. I don't know what to do. I could not access it through the internet and couldn't open my Mcaffee because when I clicked on them that nothing is happening and also this error prompt as well. Safe mode also affect this problem. Can someone help me?

  Hi Michel,.

  • You did changes to the computer before this problem started?

  However, you can follow the steps below and check if it helps.

  Step 1

  When you start the Office Manager and access, follow the steps below and check if it helps you recover after return the result and the office icons.

  1. In the Task Manager, click New task.
  2. In the box type explorer.exe and click Ok.
  3. Check if you can see the desktop.

  Step 2

  You can try to boot to the desktop in SafeMode with network and check if you can access the desktop normally. To boot to the desktop in safe mode with network keep tapping key F8 during restart. Once you see the option to start in safe mode with network, select it and press ENTER. Previous post: the result.

  Step 3

  If you are able to boot to the desktop in SafeMode with network, you can access the link below and download the hotfix and install it in normal mode and check if that helps.

  http://support.Microsoft.com/kb/948277

  Step 4

  This can occur if your computer is infected by spyware or malware. I suggest to start the computer in safe mode with network and try to run the program Antivurus.

  Also, follow the steps mentioned in the link below as well as to get rid of malware. How to get rid of malware.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  There is a SPACE between 'exe' and ' / '. You didn't have that. That's why.

  Please copy and paste it in the search box ot Run box... outlook.exe /resetnavpane

  t-4-2