E1200 WiFi falls 80% new packages computers, computers relatively old and wired OK

Router: E1200 2.0.02 build 3 February 15, 2012

These symptoms are stumping me:

WiFi removes the packages of 80% of new computers (Win7, IPv4 active andIPv6) to internet hosts reliable.  WiFi is OK (0% loss) of new computers to E1200 himself (ping address IP E1200).

Old computers, wired and mobile devices are OK for reliable internet hosts.

Basic wireless settings are mixed, Auto channel width.  Wireless security is set to WPA2/WPA Mixed Mode.  Active guest access.

I installed a lot of routers E1200 with good results but have never seen this set of symptoms.  Any ideas?

Thank you!

Reduce the MTU value has not been set.

Thanks to a thread related http://homecommunity.cisco.com/t5/Wireless-Routers/E1200-very-slow-wireless/td-p/492752/page/3, the following configuration works around the problem.  I reduced the difficulty of configuration for the following two parameters:

Under Wireless:

  • Basic wireless settings: channel width: 20 MHz only (automatic has been activated previously, 40 confirmed MHz previously)

Applications and games

  • QoS - make all disabled. (WMM enabled previously)

Again, the only affected customers were relatively new computers, presumably with new 802.11 n batteries.

Tags: Linksys Routers

Similar Questions

  • New desktop computers, are Mac and workstations equals cheaper pc with the best record?

    I am looking to buy a desktop computer for General CS, primarily PS and AE, a little bit more VJ software, audio sequencers and 3D animation here and there. I'm not a professional, but I hope to be one day that I am graduating soon. I notice there is $1000 + post computers work of office that are similar or worse RAM and CPU than desktops under-$1000 seeking players or users to general. Then there is mac, which cost a lot more for similar specs, but I'm considering an iMac 21.5 "if it's really worth for creative media.

    This is essentially what I'm talking about. Less expensive desktop computers have better specs than the more expensive iMac desktop and workstation.

    I suppose that there are increases in quality with the iMac and workstations, but is it useful? Are the way that these things are built is going to make them work better than cheaper, for my needs? I came to believe that I need to at least a certain amount of RAM and power for editing and processing videos but I have no $2000 + buy an iMac or a workstation with sides, so if I have a machine of 'better quality' with lower parts is that generally sufficient?

    Any advice appreciated, thanks.

    to implement the performance POV vs $...

    First Pro CS5 Version 5.5 trial

    Mac Pro 2010 double 2.93 GHz $ 7798 more carefully from apple $800 for the single video card you canput in Apple for Cuda

    24GB 1600 CL 9

    Quadro 4000

    2 WD 1 TB Sata 64 Meg Cache 600 drives in Raid 0

    Video - AVCHD 1080 p 24 frame each cut to 30 minutes of material

    Export of Codec - H264 HDTV 1080 p 24 default preset

    4 effects by layer - fast color corrector, brightness & contrast, video limiter, sharpen

    Each layer reduced to 50% for 4 frame view PinP.

    Layer 3 - 42:24

    Layer 4 - 44:05

    I7 2600 K 4.7 GHz on $3256

    16 GB Blackline 1600 CL 9

    570GTX

    4 WD 1 TB Sata 64 Meg Cache 600 discs in 2-Bay Raid 0

    Layer 3 - 30:46

    Layer 4 - 33:36

    I don't like what universe you come from there is NO justifaction to spend $8600 and get less performance than a system of $3250. for about $300 more you can get performance still superior to the new Sandy E processor

    Scott

    ADK

  • The call to package.procedure thanks to DAD and it says error HTTP 404 not found

    I have a url works fine with package.procedure which has some html and JavaScript as follows:

    http://hostname:port/dad_name/package.procedure

    Regardless of the procedures in this package works very well. But when I create a new package with a different name and the same procedures, it gives me
    Not found
    The requested URL /dad_name/new_package.procedure was not found on this server.

    Both packages have same subsidies. I'm missing something.

    Is - this WHAT FATHER modplsql has any place where he lists the objects that can be accessed via the URL? I checked the dad.conf, he has not an exclusive list in there.

    Thanks in advance
    KK

    you did not mention the name of schema. did you?
    What server component applications do you work?

  • new to computers; can I update and install the recommendations at all? Why? is microsoft Secur. Essentials enough? im confused...

    IM totally new to computers in this age/era.  should I install all updates and recommendations and why?  And I use microsoft security databases to protect my computer.  is that enough?  If not what else?

    Hello

    Yes, you need to install all the applicable updates such as those that will enhance the functionality of the
    computer and also help to ensure his safety.

    =============================

    MSE is an excellent antivirus/antispyware software.

    Here's what I use and recommend:

    Avast and Prevx proved extremely reliable and compatible with all I have
    launched on them. Microsoft Security Essentials and Prevx have also proven to be very
    reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

    Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
    Operation of the network.

    Prevx - Home - free

    Windows Firewall

    Windows Defender (is not necessary if you use MSE)

    Protected IE - mode

    IE 8 - SmartScreen filter WE (IE 7 phishing filter)

    I also IE always start with asset if filter InPrivate IE 8.
    (It may temporarily turn off with the little icon to the left of the + bottom
    right of IE)

    Two versions of Avast are available 5.x and 4.8 x - use only and no if using MSE.

    Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
    Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
    Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
    Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
    disabled - click OK
    http://www.avast.com/free-antivirus-download

    Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
    and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
    Finish those you don't use).
    http://www.avast.com/free-antivirus-download#TAB4

    Or use Microsoft Security Essentials - free
    http://www.Microsoft.com/Security_Essentials/

    Prevx works well alongside MSE or Avast

    Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
    programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
    or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    PCmag - Prevx - Editor's choice
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
    would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
    (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
    never find anything of note that I started to use this configuration.

    http://www.Malwarebytes.org/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • I put a new hard drive in my laptop and when I installed Windows Vista I get this message: "windows cannot configure windows to run on this hardware of computers."

    I put a new hard drive in my laptop and when I install Vista I get this message: "windows cannot configure windows to run on this hardware of computers."  I can't install an oem on a new hard drive version?  This is the portable original in all other respects.

    original title: new hard drive and vista

    Hello

    strange that you can request that

    HP computers have been known to not let you install Vista on a non HP bought replacement hard drive

    There were a few posters with this problem here

    If the OEM disc for this particular laptop, you should be able to reinstall it as many times as you want as long as you have not changed the main material (the motherboard)

    You can change the hard drives, RAM, etc.

    I presume that you boot from the Vista DVD

  • I have CS5 with two computers under license, and a pc no longer works. How can I put CS5 on my new laptop with a valid license?

    I have CS5 with two computers under license, and a pc no longer works. How can I put CS5 on my new laptop with a valid license?

    You will need to contact Adobe to reset your license.

  • I want to use Windows Easy Transfer XP to my data, but the software said "computers are old computer."

    I want to use Windows Easy Transfer XP to my data, but the software said that "the two computers are old computer", how do I chanage the parameter in the new computer? In addition, two computers are running in Windows XP system, thank you.

    Thanks for answer you, it is really useful.

    But I have another question:
    Why Windows Easy Transfer is still a Windows XP version?

    Thank you.

    Because Windows Easy Transfer is designed to transfer data FROM a Windows XP computer TO Windows 7 (or Vista) computer.

    For example, you install Windows Easy Transfer on the computer Windows XP, but the output (if it is stored on external media or transmitted over a network connection or cable Easy Transfer) is used by the Vista or Windows 7 computer.

  • If computers can hear and understand why cant def people hung cortana voice to text so that they can hear what someone means.

    Original title: a hearing aid

    If computers can hear and understand why cant def people hung cortana voice to text so that they can hear what someone means. When the speaker is on and some a talkes in the micro computer texts on screen so they can read what said you the person could even put a device into a lens of a pair of glasses, so they could read as they talked they could close with and only when they wanted to communicate that they would turn on phone.

    Hello Paul,

    Thanks for posting your query on the Microsoft Community.

    According to the description, you're suggesting to add functionality to Cortana.

    Cortana is available only with Windows 10 new feature.  So, if you have 10 Windows on your system, you can provide us your suggestions, your comments app available in Windows 10.

    You can provide feedback through the feedback for all solutions app to your request in the future. Refer to the following steps:

    (a) click Start, and then search for "feedback".

    (b) click on app reviews and follow the instructions on the screen to send your comments.

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • I deauthorised all my computers several times and iTunes still shows that I have authorized 5.

    I allowed off all my computers several times and iTunes still shows that I have authorized 5. I can not re - allow one of my computers and cannot allow overall because I did last October. I tried a logout and back logging, remove the SC info folder etc... Any ideas?

    I allowed off all my computers several times and iTunes still shows that I have authorized 5

    Normally, you can only authorized computers off once a year.

  • Is there a problem with firefox does not, it's happening on all our computers at work and at home. It takes about 10 seconds, then stops responding.

    I read FF posts of the community, and it seems to be a problem with a lot of ppl. It happened for about 3 days now on all our computers at home and work. This cannot just be linked to a computer if this happens for many. I was wondering if there is a general problem with FF, is that what is happening for many users. When I start FF I am lucky to get 10 sec before it does more, ready to give FF film! I use it in safe mode now & use of IE next until I find another solution other than resetting FF. FF should maybe see if there is a problem at their end, & then show us how to fix it.

    To return to regard to extensions, you can view and update the extensions on page modules. Either:

    • CTRL + SHIFT + a
    • Firefox orange (or the Tools menu) button > Add ons

    In the left column, click Extensions. Click the "gear" above the list, and then use the check for updates.

    You can also disable non-essential or unrecognized extensions (or so obviously not good, remove them).

    Typically, a link will appear above at least an extension disabled/removed to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

    Any improvement?

  • problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

    Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

    On the Pro iPad, tap settings > general > reset > reset network settings

    You will need to re enter your Wi - Fi password.

    Then try to connect to your Wi - Fi network.

    If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

  • WiFi in my new computer dell laptop with windows 8 limited access list

    I got a new laptop Dell with Windows 8. The wifi connection shows limited and I couldn't access the internet. I have a laptop with windows 7 that works well with wifi, please help

    Hi Carmel,

    Limited connectivity error means that the computer is connected to the router, but the PC has not been assigned a valid IP address.

    Method 1:
    I suggest you try the procedure described in the article and see if it helps.


    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Method 2:
    If the problem persists, I suggest you try to reset TCP/IP. Check if it helps.

    (a) boot to the view from the office.

    (b) open command prompt, right click in the left corner when the window appears and select (admin) command prompt.

    (c) at the command prompt, copy and paste (or type) the following command, and press ENTER:

    netsh int ip reset c:\resetlog.txt


    Note:
    if you do not specify a path of the directory for the log file, use the following command:

    netsh int ip reset resetlog.txt

    (d) restart the computer.

    See the article and check if that helps.

    Why can't I connect to the Internet?
    http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-Internet

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • I am a user of Picasa for a long time conversion to Lightroom.  I share photos with dropbox on a MAC, a Windows computers, storing images and the catalog in dropbox.  I'm able to share the LR catalog, but on the second system images can be found as s

    I am a user of Picasa for a long time conversion to Lightroom. I share photos with dropbox on a MAC, a Windows computers, storing images and the catalog in dropbox. I'm able to share the LR catalog, but on the second system images can be found as a prefix system DB files have different user names. Any ideas?

    At the point of Lightroom to another location for photos, follow these instructions:

    http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

    Note: If the catalog is constantly being synchronized to DropBox, you will most likely follow these instructions whenever you open the catalog on another computer.

  • Hello, a license can be used on my two computers: my laptop and my desktop computer?  Send Message

    Send Message

    Hello, a license can be used on my two computers: my laptop and my desktop computer?

    Send Message

    Send Message

    Send Message

    Send Message

    Yes, you can install it on as many machines as you want.  Of these machines, you can have two of them signed use.  Of these two, you can only use the subscription on one at a time

  • What is exactly included with the new package of photography for adobe?

    well first of all, I'm in love with all these massive changes all around.

    Secondly, I'm kinda a hot mess.

    For starters, I put to level my poor old PC to a Mac (it was time!), it means I'm losing all my previous software. (It's time to also update in all cases) I currently have installed cs4 and also lr4 on my PC. I pick up my new Mac mini tomorrow and would like to have a solid game plan.

    I'm having a hard time to understand what the new cloud options, as well as the package of photography for $9.99 / month. With that, cloud creative included? do I have to buy cloud creative membership in addition to the packaging of photography? This includes full use of photoshop and Lightroom versions? And finally, what is the advantage vs lr5 buying outright (physics software) and / or using Photoshop full download purchase and use by creative cloud. My how times have changed... I feel so out of the loop, however extremely excited for the changes and the inspiration.

    Thanks in advance and follow the incredible changes.

    RP

    My understanding is that the photographer $ 9.99 package includes 2014 CC Photoshop and Lightroom CC 2014, as well as 2 GB of cloud storage. He does not include access to the rest of the apps universe CC (what you would get with a full package of CC), nor does it include TypeKit as part of the package. It also includes access to iPad and iPhone applications of Lightroom and the Photoshop Mix app for the iPad.

    Here is a link to the press release: Adobe Releases New Creative cloud photography Plan for $ 9.99 per month

Maybe you are looking for