E2000 manual install - works, but where is the reference to the Guest Login?

Similar Questions

• Win 10 Portege R700 and R930 works but wher is the BIOS?

  I installed W10 on my R700 and R930 successfully - but I have two minor I have questions can´t address:
  -I can not enter the BIOS - the road via advanced settings - start - troubleshooting - repair etc does not work. How can I enter BIOS in W10?
  -J' I try to update my Intel drivers through the Intel driver utility to update - but when I run this app - the App are not able to identify the Intel on my Porteges two drivers - how can it be possible? In the system information, can I see information about Intel processors - how is this possible?
  Otherwise W10 works well...

  / Anders

  Well - I found the answer to the first question - how to enter in Bios in W10 - energy options that you must disable the quick start - then you enter BIOS just taking the F12 to power. Worked on my two Portégé.
  / Anders

  I installed W10 on my R700 and R930 successfully - but I have two minor I have questions can´t address:
  -I can not enter the BIOS - the road via advanced settings - start - troubleshooting - repair etc does not work. How can I enter BIOS in W10?
  -J' I try to update my Intel drivers through the Intel driver utility to update - but when I run this app - the App are not able to identify the Intel on my Porteges two drivers - how can it be possible? In the system information, can I see information about Intel processors - how is this possible?
  Otherwise W10 works well...

  / Anders

• Yahoo page does not work. It seems that java does not work, but I have the latest version installed. Yahoo email page has all scrambled together all left links

  Yahoo page does not work. It seems that java does not work, but I have the latest version installed. Yahoo email page has all the links scrambled together on the left side of the page. Same thing with face book page. All use them to work properly. 64 Waterfox win 7

  Do not use waterfox, it is not supported and is a non-official version of Firefox that often has known bugs. Downlaod Firefox from www.getfirefox.com, uninstall waterfox, then try again.

• My labtop sound works, but when connect the headphones does not work

  My labtop sound works, but when connect the headphones does not work. Note that the headset before 1 HR was working.

  Hello

  ·         Are these USB headset or headphone jack analog standard?

  ·         What version of the operating system is installed on the system?

  If you continue Windows 7 or Windows Vista refer to the procedure in method provided below and check if they help to resolve the issue.

  Method 1:

  Step 1:

  You can check if the headphones are activated as a playback device. To do this, see the following steps:

  (a) the Pearl-click Start and type Sound in the start search box.

  (b) in the Start Menu Options, select change adapter settings .

  (c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

  (d) select headphones and select

  Step 2:

  Also try to put headphones of default device and check, follow the steps below.

  (a) go to Start and click on Panel.

  (b) click Sound, and then a new window will open.

  (c) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  (d) now check if headphone is listed there and right-click on it and choose activate.

  (e) highlight this helmet and click on "as default'.»»

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• I am running windows vista without service pack, 32-bit. I can't install the update. I got the error code WindowsUpdate_8007371C. I want to finally install sp1 but I got the same error.

  I am running windows vista without service pack, 32-bit. I can't install the update. I got the error code WindowsUpdate_8007371C. I want to finally install sp1 but I got the same error.

  popihavaki,

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/aeb7abd4-73c6-403b-9c43-bce64193a1af/>

  05/05 / 1101:03: 23 am

• Desktop speakers work, but cannot hear the music or videos on you tube

  Desktop speakers work, but cannot hear the music or videos on you tube of my speakers

  Tommy, thank you very much for your detailed answer.  As you will see below, it has been fixed so simply!

  Ah - so basically the same thing that fixed the issue of the original poster as well?

• G780 keyboard does not work, but ONLY if the Elan Touchpad driver is installed.

  I have a bad surprise today--unlike other manufacturers, which offers one year free tech support, Lenovo does not. $179 for a contract or $89 to cover an isolated incident. Thank you, guys. :-/

  Here's my problem.

  G780, bought last October. Upgrade to Win7 Home Premium Win8 Pro.

  A few days ago the integrated keyboard has stopped working. It works in the BIOS, but when you start in Windows, Windows does not recognize it.

  There is a PS/2 keyboard driver and device keyboard HID that appear in Win8 Device Manager. I guess these are the drivers for the built-in keyboard. If I plug in a USB keyboard, it appears in the device as an additional device keyboard HID Manager.

  By trial and error, I discovered that the keyboard still works fine when the Elan touchpad driver is not installed. The problem with THAT: I can not disable the touchpad unless the driver is installed, and if the touchpad is not disabled, it will screw me up because I accidentally brush my hand against the touchpad while typing.

  I also noticed that sometimes the touchpad in the system tray icon with a WARNING icon overlaid on top of it (you know, the little yellow triangle with exclamation point). I can't understand why, and I can't understand what has changed on my computer that caused the keyboard to stop functioning properly.

  I tried uninstalling the Elan touchpad driver, download the latest driver from support G780 web page and put it back. No luck.

  I make do with a USB keyboard at the moment, but I really need this problem is resolved.

  Thanks in advance.

  So I had uninstalled the drivers of momentum earlier... yesterday I tried to reinstall those supplied with the computer.

  At least the keyboard worked now, but the drivers have not been properly disable the touchpad when I plugged the mouse.

  Then I hit Fn - F6, not really thinking that he would do anything, but it fixed the problem.

  I would have but the pilot would have overridden some setting I put with Fn - F6, but... maybe not.

  Problem solved.

• Can I manually install a trial downloaded with the wizard?

  I try to install Photoshop Extended CS6 under Ubuntu/Wine (which I've done before, successfully with PS7 and PS CS2 to our Institute). Unfortunately it is no longer available via Download Wizard, which takes place under Ubuntu/Wine, download stuff, but then get completely blocked 'extraction '.

  Can I manually install the trial?

  P.S.: except a bug with the Brush tool, CS6 obviously work under wine, see: http://appdb.WineHQ.org/objectManager.php?sClass=version & iid = 25607

  Yes, you can download the trial PS CS 6 from here: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  Make sure that you follow the steps before you start to download

• XPS 15 9550 CPU speed is as low as 0.75 ghz after manually installed windows 10 with all the drivers installed and BIOS updated

  I just bought this XPS 15 9550 in January, and I really appreciate it at first.

  However, one day, as pushed microsoft update to 10586 version of windows 10 and the machine will always fail to install the update, so I decided to download the image file and install it myself.

  The installation went smooth, but after a few days use, I found the computer is very slow during playback of videos and games and I came to find the speed of the CPU shows the label of performance in the Task Manager always will be 0.75 ghz and 0.78 ghz. He cannot go above that. I also found that the use of the CPU cannot exceed 30%.

  I've already updated my BIOS to 1.1.19, reinstall the system, a few times, choose the battery mode high performance, etc and this does not help.

  I also downloaded the power of intel and found gadget for my processor power consumers are still weak and the speed of the CPU is always not 0.80 ghz.

  In addition, I encountered the problem that after plugin the AC power, the speed of the CPU will fall to 0.39 ghz...

  Someone at - it an idea of what is happening here and how can I solve the problem? I'll really appreciate it. Thank you.

  I had my problem is solved. Follow these steps:

  1. download gadget power intel, you can search online for it.

  2. check the power of your CPU (package pw...) rate and open the videos and applications that will constantly consume the CPU power. See if the power is still weak.

  3. If the power is still weak, try to update your BIOS (download dell drivers and the new version should currently be 1.1.20) and see if things are getting better.

  4. If the power is still low, you must contact dell technical service to replace your hardware (my computer has replaced the northbridge, southbridge, I forgot, but after replacing, the CPU works fine)

  Note: If you run games using your discreet graphics card, such as starcraft II and you found that it's extremely slow, it is possible that your cpu is capped.

• Open the new browser works, but cannot change the cursor to reflect that it is clickable

  Here is the link to my site - www.localwally.com/napatest3
  
  I wanted to make all the pictures on the clickable site for a larger image - but I didn't have to create separate Web pages for each of them. And I went to the BEHAVIORS added "Open the browser click" - it works, but I can't find a way to change the cursor to the arrow by hand to show people that this is a clickable link. Here is the code below - any ideas? Don't you worry that when you click on it it does not return a pic. I didn't upload them for this test. You should get the new browser without content inside.
  
  Also, I would love to add a caption to the photo, but does not know who is!
  
  Thanks for your help - Gary
  
  
  "< td width ="419"height ="318"> < div align ="left"> < span class ="style25' ondblclick = "MM_swapImage ('Image1 '", 'reynoldsfamily_800.jpg', 1) "> < img src ="Renolds_400.jpg"width ="400"height ="300"id ="Image1"onclick =" MM_openBrWindow ('reynoldsfamily_1000.jpg', 'ReynoldsFamily ',' width = 1000, height = 70 0') "/ > < br / >
  Sipping a chard at Reynolds Family Winery, a beautiful look on the Silverado Trail < / span >

  > Is there an easy way to create this code in other
  > that cut and paste?

  Learn the HTML is the most important thing you can do if you are serious
  on the use of DW.

  There is an easy way to do it-

  * Select the image that triggers the behavior
  * Enter it ' # ' in the field of the property inspector link
  * When you tab off the field link, you should see appear on the
  Tag (at the bottom of the document pane) selector
  * Click the tag in the tag selector and apply the behavior

  That you will get 90% of the way. There are two additional things you
  can do after that-

  1 copy the link in the image you pop up and paste it instead of
  the "#", you added to the link field
  2. Add '; return false;' at the end of the behavior

  I believe that David Powers has an extension called "Smart Link" that will do
  These for you two. Google it...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "garynng" wrote in message
  News:g3h10m$OIJ$1@forums. Macromedia.com...
  > Thanks - a follow-up question - y at - it an easy way to create this code
  > other
  > that cut and paste? I have a lot of pictures on other pages
  > and
  > need an easy way to do it. I created the original code by clicking on
  > the
  > Option of behaviors on the right side of DW.
  >
  > Really, thanks for your help. My daughter told me about using DW versus
  > coding myself the old-fashioned way and I'm happy she did, but it's a bear
  > try to learn this stuff!
  >

• Try to install Winzip but I get the message "f:\. 1397 invalid driver. "

  Original title: How can I fix - error 1397. f:\ driver invalid?

  How to fix my computer? I am trying to install winzip 15.0 and the following error keeps coming up "1397.Invalid f:\ pilot error." »

  Hi Benfarrugia,

  • When you get the above error message?

  Here are the steps to fix it.

  1. click on Start, click run, type regedit in the Open box, and then click OK.

  2. look for the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\ Explorer\User Shell Folders

  3 in the pane right - see if it's all entries which has a F or any other alphabets not C (your folder OP) modify data of C:\

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

• No sound in my account of personal connection but its in the guest account

  I am getting no sound when I am logged into my staff/admin account, but works when I connect to the guest account

  Hi cjayet,

  · What is the number and the model of the computer?

  · Do you get any error message when you try to play any sound?

  There seems to be problem with the settings of the user account.

  Method 1:

  Make sure that you have configured the audio device by default.

  Follow these steps:

  a. Click Start, click Control Panel and then click sounds, speech, and Audio devices.

  b. click on sounds and Audio devices, and then click the Audio tab.

  c. in the reading section of the sounds, under default device, make sure the audio device is the correct default audio device.

  d. If this isn't the correct default audio device, click the drop-down list next to the device name, click the audio device you want, and then click OK.

  e. change the audio device may require that restart you your computer.

  Method 2:

  You can also run the troubleshooter from the link below:http://support.microsoft.com/mats/no_sound/en-us

  You can also check out the link below: no sound in Windows:http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I forgot my password for user windows 7 with no admin account, but only got the guest account

  I have accidentanly I forgot my user password. But my laptop has no administrator account, just guest account. How can I reset my password with the guest account never? Or can use the disk? Can what type of disc I use? What can I do? Please... someone help me?

  What to do if you forget your Windows password

  If you have forgotten your Windows password and you are on a domain, you must contact your system administrator to reset your password. If you are not on a domain (most of the individuals are not on a domain), you can reset your password by using a reset disk of password or by using an administrator account.

  Create a password reset disk:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-password-reset-disk

  Reset your Windows password:
  http://Windows.Microsoft.com/en-us/Windows7/reset-your-Windows-password

  If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to connect to Windows and you will need to re - install Windows.

  What to do if you forget your Windows password:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  Solutions to common problems with logging on Windows:

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-problems-with-logging-on-to-Windows

  Change your Windows password:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-Windows-password

  Microsoft's strategy concerning lost or forgotten passwords:

  http://support.Microsoft.com/kb/189126

  Keep secure passwords - Microsoft strategy on move the passwords:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• Cc14 Photoshop and lightroom installed and works, but when starting the creative program cloud says: no program installed, mand shows that old programs like SP6 to install

  Hello!

  When I start the creative cloud, information that any programs not installed and I can download SP6. But I installed the latest versions of photoshop and lightroom works correctly.

  My system is windows 7 64 Bit PC.

  I had to uninstall the program creative cloud because he didn t react a few days ago. Then I installed again and now I have this wrong behavior.

  Does anyone know how to tailor the program creative cloud correctly?

  Thanks in advance

  Andreas

  Make sure that you had not changed the language on creative cloud desktop

  Also try to perform steps below

  On the desktop creative cloud on the right side click gear icon and exit Creative Cloud App

  Then right-click on the creative cloud desktop shortcut and choose Properties.

  Then click on the Compatibility tab

  In compatibility mode ' ' make sure that ' run this program in compatibility mode for "check-box is disabled."

  If it is checked, uncheck it and click on apply, Ok. Then launch Creative Cloud application and try.