Help, please! Aspire E5-511-P4LN takes at least 30 minutes for it to start after stop down

Help, please!  I have an Acer Aspire E 15 (E5-511-P4LN) that I bought online at HSN last September, 2014.  I'm not really sure what happened past.  On the morning of April 10, 2015, I had downloaded the Wakfu game in my computer.  I played the game for two hours, then turned off my laptop around 14:30.  The same day in the night, about 9:30 pm, I started my laptop, but the monitor was blocked to the Acer Logo at least a half hour!  I thought that it must have the game I've downloaded so before going to bed I hibernated just my computer.  When I woke up the next day, it took my computer at least 15 minutes at the start of Hibernation!  Once he showed me the splash screen, there is no problem with the computer's performance.  in any case, I uninstalled Wakfu of my computer when I finally got in my computer.  I even downloaded CCleaner and used clean the registry.  However, today, April 12, 2015, when I started my computer, he remained on the Acer Logo for at least thirty minutes before taking me to the splash screen!  It's just too.  I don't know what else to do.


strange question.

the 'fastest' solution will involve a backup of your data and a reinstall of windows.

If you don't mind not to do, turn off your laptop and turn it on by pressing ALT + F10 to launch Acer erecovery process.

If she starts always slowly, we try to limit the question on a clean system.

Tags: Acer Laptops

Similar Questions

  • It takes up to 4 minutes for the player switch between library and Rip, and vice versa.

    I run Media Player 11 on my XP machine with spare 120G on the C: memory and 3G - recently, it takes up to 4 minutes for the player switch between library and Rip, and vice versa. I have re-installed twice but no change. No new software has been installed before this time.

    Hello Absno69,

    Thank you for your message.  You mentioned that there were no new software installed before that happens.  Were there any hardware changes or updates?  If this isn't the case, we will perform a system restore to a point that you know that your system is working effectively.  Click HERE for the system restore instructions.
    Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Help, please! CHKDSK stuck at step 4 of 5-6% for more than 90 minutes. If it is frozen? What can I do?

    Not very intuitive with the hard disks, disks, partitions, etc.  A friend told me I should be defragging my computer frequently to help it work better.  Then, I looked at steps to defragment and learned to run chkdsk first before you defragment.  I clicked on properties, tools, scheduled chkdsk for my C drive, checked the boxes ("automatically fix file system errors" and "Scan for and attempt recovery of bad sectors") and rebooted my computer to run the chkdsk command.

    Here is what my screen said during the last 90 minutes:

    The type of the file system is NTFS.
    volume label is PRESARIO.

    A disk check has been programmed. Windows will now check the disk.

    CHKDSK checks the files (stage 1 of 5)
    (deleted and corrupted files verification of such complete record)
    CHKDSK is checking the indexes (stage 2 of 5)
    (same as step 1... full check)
    CHKDSK is recovering lost files
    CHKDSK checks the security descriptors (stage 3 of 5)
    Security descriptor complete check.
    CHKDSK checks Usn Journal
    Audit of the USN Journal is complete.
    CHKDSK is verifying file data (stage 4 of 5)
    6 percent completed.

    And that's where he lives.  My computer is frozen?  I hear the tour runs every so often, as I work with something, but does not change the 6%.  I'm afraid to turn it off in the middle of DSKCHK but I don't know what else to do.  Help, please! I have windows XP Home Edition.  I had problems with my PC freezes in the past, but I usually just choose a restore date and it solves the problem for a while.  I had no need to restart in a while, I just wanted to start to defrag regularly to help the pc normally elapse.

    "PLEASE HELP!" I have windows XP Home Edition. »

    XP forums:

    Link above is for XP Forums.

    There is a list of the different Forums XP to the link above to help you.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

  • Why does take more than 10 minutes for the internet to connect?

    My vista system takes more than 10 minutes to have an internet connection after I reload. I can get an immediate connection when restart in safe mode but not in normal mode. I am direct connection. I check start programs but can't find anything causing conflicts when starting upwards. Please help this Office HP a6530f m 2009 novice computer user!


    I would have you try both.

    Thank you.

  • Since a week everytime I turn on my laptop there is a update that takes at least 20 minutes, after the update is finished, he won 't restart. Restart repair, take another twenty minutes or more. Why is this happening?

    Is it possible to have the updates everytime I turn on my computer, it happened six times in one day. Help, please


    More than likely that you have one that is stuck.

    I guess that part of the question could be a driver which is really old or similar should not be loaded.

    This exit Windows updates on (after you have access) and stop the updates of the driver to load.

    How to disable automatic driver Installation in Windows Vista - drivers (WS.10) .aspx


    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista

    Method 1: Start Windows Vista with the Windows installation media and use the repair feature

    How to do a startup repair in Vista

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the System Recovery Options

    Try recovery options Startup Repair

    How to do a startup repair

    Method 2: Start the system in safe mode and then use the system restore feature

    How to make a Vista system restore

    You can also do a restore of the system of starting with a Vista disk.

    Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

    See article below for that.

    You can use this method on the updates that have this problem.

    Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
    and install it.

    Microsoft Download Center


    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?

    Hope this helps sort it out for you.
    Rob - bicycle - Mark Twain said it is good.

  • When trying to update, I get a message that says I don't have the required system permissions & contact system administrator. It's my computer and I'm the only person who uses it. Help, please. I use mac osx 10.4.11 thanks for answer, michael

    Hi, I have all the software installed on this computer and have even updated before firefox. now, by clicking on the tab "check for updates" I get the above message. Since it is my computer I guess I am the administrator and I had no difficulties to install the software before. What could happen? appreciate any help on this. Thanks, michael

    If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

    Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

    • Trash the present application Firefox to do a clean (re-) install
    • Install the new version you downloaded

    Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • Help, please... My online website does not work for users of Windows, Chrome...

    Hi, everyone, I really need your help.

    I just finished my first Muse site for a client and made live for everyone to see. I double and triple checked everything and it looked fine on my computer (Google Chrome browser, but on a Mac). However, when my client saw it, he said there was a huge mistake - the text of the navigation bar has been cut in half!

    I asked my boyfriend to go to the site on his computer... also a Windows and on Google Chrome. Same question. However, when he went on the site of Mozilla Firefox or Internet Explorer, it works wonders for him.

    How can I solve this? According to Google Analytics, most of our customers use the internet browser Chrome... and the site is already online and people visit it (ah!).

    EDIT: according to my mother, it does not work on his computer and neither Firefox or Google. So I do not know how this bug of functions.

    Here is the link to the site:

    And here is a picture of the bug: (I don't know why he inserted upside down, do not know how to change it, but I hope you can see that the upper part of the navigation has disappeared).


    Hi Claudia,.

    I see that the problem is with the font that you used in the navigation, a bubbler. I'll have to discuss with the team of devs. In the meantime, solution faster that I can suggest is to use a different font on the navigation.

    - Abhishek Maurya

  • v3 takes about 5 minutes so that it starts after you disable all extensions, etc.

    Hi all

    I'm trying to understand why v3 SQL Developer takes so long to load up.
    I've searched the forums and made a few tweaks, but still takes forever (~ 5 minutes!)

    1 changed in appearance Windows
    2 disabled all extensions
    3. confirm that the "update automatically" is disabled

    Anything else I need to do? So most of the actions I take are really very slow.
    One thing I think that maybe that causes are that in TNS network file is huge... but I guess that it would be a success if I try to add a connection.

    Any help would be appreciated, because for now, it is not a usable software piece...

    Who thinks so.
    I make a set of those I really need (or even no) and place this file in a different directory, and then point to that one in preferences - - Advanced - Database Directory Tnsnames.

    Hope that helps,

  • my hotmail is too slow opening received e.mails and e.mails new writing, it takes at least 15 minutes to open the e.mails

    opening and writing e.mails is too slow it takes several minutes to open the page the box and wright a new e-mail

    This forum is for comments on the forums for answers. You should take a look at

    Stefan Blom
    Word Microsoft MVP
    (Message posted by Microsoft Answers NNTP Bridge)

    "Mohamed Shaboury" <=?utf-8?B?TW9oYW1lZCBTaGFib3VyeQ==?=>wrote in messageNews: 69affb82-3 a 58 - 4A 89-ad96-63acfc7ebcb3...

    opening and writing e.mails is too slow it takes several minutes to open the page the box and wright a new e-mail

    Stefan Blom, Word of Microsoft MVP

  • ESX4 starts - but takes at least 20 minutes before I can connect with vsphere client!

    Currently, three servers of ESX4. Two months ago, a loss of power and of the restart. Server #1 initialization until the connection to the console without problem. Unable to connect to the server using client vshpere immediately. After 20 minutes, the vsphere client connections began to work.

    Although nothing of him until the #3 server went down today and restarting system apparently came to the console ok, but took 40 minutes before I could connect to it with vsphere client!   Y at - it something stupid I'm missing here? I have not tweaked these boxes, plenty of stock and NO settings have changed since its installation. They never used to take this long!

    Any ideas?

    I'm going to this post too, just in case

  • Help, please. Start Windows7 very long.

    I recently got a new computer with a SSD 840 Samsung Pro, processor i5 3570 k, ASRock Z77 Extreme4 Mobo, Corsair Vengeance DDR3 1600 RAM; When I started windows 7, he ran fast and getting started fast. Now, after installing all the updates for the first time on this computer, it takes several minutes. The last time I started, I've timed it to 9 minutes. Once it starts, everything else on the SSD starts instantly, without a problem. So no problems with the SSD. This leads me to think, that he had something to do with updates for windows 7 that I just installed. All this took place in a single day, yesterday 02/03/2013. Please help to find an answer to the setting of my time for windows 7 starter.

    (USB) Universal Serial Bus controller
    PCI\VEN_1B21 & DEV_1042 & SUBSYS_10421849 & REV_00\4 & 37A73C8A & 0 & 00E7
    The drivers for this device are not installed.

    Install this driver - ASMedia USB 3.0 driver ver: Extreme4

    There is an update of the BIOS.

  • Installation of help please

    Can anyone help please? I am a user of Windows Live Mail for a long time, but I am disappointed with their product, because it crashes regularly and recently wiped a lot of messages, so, after having heard great reports, I think that the time has come to try Thunderbird. I do, however, have a few questions that I would be grateful if someone could advise me on please...

    I know how to move e-mail messages in Thunderbird, but is it also possible to move my accounts and their settings from Windows Live Mail to Thunderbird without having to configure each new individually please? The Import Wizard appears to count it is possible, but has nothing more after "import options, account settings, address book, filters and other data of:" even after a click on the next button. I installed the import/export addon, but always without success. Is it indeed possible please?

    Also, is it possible to install the views 'fast' section that WLM has on Thunderbird, which was allowed to see all read mail from each account in one place please? This a really useful feature and I want to keep if possible.

    Any help much appreciated.

    Import of account to Windows live mail never made Thunderbird... partially because there is little demand, and partly because Microsoft not to change.

    However if your accounts are with the largest suppliers, hotmail, yahoo etc. or the large national ISPS and then set up your account is probably as simple as enter the e-mail address and the password. (There are often problems with poorly reported passwords. It is anti virus firewall clutter it and an adjustment for the firewall to allow the Thunderbird gets things on track)

    Your 'quick' view seems unified records of the Thunderbirds.

    See Menu (alt + V) > records > unified

  • I want to install the ios 9.3 update in my iPad. I get the message: "audit failed because you are no longer connected to the Internet" actually, my wifi works and I'm online. Help, please.

    I wanted to install an update to iOS 9.3 on my iPad mini legacy. After that I entered the password for my motto. I receive the message: "check failed because you are no longer connected to the Internet. I then checked my wifi and works and I can go online. why I can't update? Help, please. Thank you

    This is a known error for which Apple seeks a solution. See Troubleshooting iOS 9.3 update problems.

  • Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

    STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

    Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

    Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.


    1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

    2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

    3. type: BATCH spuninst.txt

    4. type: exit

    Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

    -Tom Steele Tom Steele

  • Connect a wireless printer. Help please!

    I have an Epson (population 600) that was given to me to a friend without instructions and I can't connect to my computer, even though it shows my wireless network and I can't understand why. Help, please.

    I have an Epson (population 600) that was given to me to a friend without instructions and I can't connect to my computer, even though it shows my wireless network and I can't understand why. Help, please.


    Instead of typing me instructions for you, download the manual here

Maybe you are looking for

  • Installation of ram in a hp omni 100-5155

    Sorry, I posted this question in the wrong category. I have a HP Omni 100-5155 while a desktop pc.  I run a Windows 7 64-bit operating system. My problem is I want to upgrade the ram in this unit and cannot find instructions how to disassemble in ord

  • Satellite A50 - no sound modem!

    Hey Buddyfirst time I have use my a50 when I dailed I could hear the clear sound modem, but after I clean and reinstall a new windows xp prof + drivers, I cannot hear his modemI mean sound of handshake when I dail to ISPnow, I want to know how I can

  • Note update android m K3

    I just want to know lenovo k3 note will get m android or not

  • DeskJet 2540 all in a Digital Photo

    I have photos on 4 X 6 photo paper difficulty printing on my Deskjet 2540.  I am running 10.9.1.  print options iPhoto doesn't give me not all sizes in addition to the standard paper sizes and 8 X 10 photo.  I had to use the dialogue print another pr

  • I am trying to remove the read-only in a file of windows vista program

    Hello I'm having a problem with the program files in Windows Vista. I have a file that I need to be able to write to and I can't get out of the read-only mode. Can someone help me with this please? Thank you.