E3000 has low-speed Ethernet but ok speed wireless Internet

Similar Questions

• How to calibrate my network adapter to take in charge of 54 Mbit/s speed wireless internet

  I have a Dell Studio XPS 1640 and my wireless adapter is "Dell Wireless 1397 WLAN Mini-card that can support 802.11 b/g. recently my ISP gave me 50 Mbps internet high speed and I use the series router (Netgear WNR2000) N that supported up to 300 Mbit/s internet speed by Wifi, but when I use the Wifi on my laptop speed is 22 Mbit/s and when I plugged the cable directly on my network card that he brought to 53 Mbps internet high speed. I calibrated and set up all sorts of settings on my wireless network card and also my router but I was not successful to solve this problem yet. Is there anyone here having a same problem or experience on this issue?

  The whims of the wifi.  How far is the lappy from the router?  How many walls are between the two?  How much interference there is (you are in the country, suburban or city)?

  How many other wifi networks is in the region that sees your lappy?

  Lots more.

• Error 651 ethernet but ok when wireless

  I bought an ASUS laptop 8 months ago with Windows 7 installed. It was working fine when connected by ethernet to a router, just recently (maybe a month ago), that I turned on my laptop and it showed that it was not connected. So, I restarted and still the problem. I went through a trouble shooting process to shut down the computer and disconnect the cable from the computer is off the router for a few minutes then plugged everything and checked, still does not work. So, I decided to use a netbook, I had to check that maybe it was the cable, it was not. I plugged the modem with the ASUS, and it did not work. So, now that I knew that it was something to do with the computer, I started studying why. I noticed that I didn't have a "connection to the local network' just a"manage wireless networks", 'change the map settings' and change advanced sharing settings. So, I tried maybe set up a new connection to the router with the ethernet and every time I tried to set up a new network to the router, I got a message "error 651". I was confused, so I searched through my wifi online - since I've always had the wifi - and I continued to get something on exchanging information with Vista drivers driver but why would I want to change a new operating system with an old driver? I don't know why I do not have a 'Connection to the local network' tab or even connect to the ethernet connection? Same connection when I use Linux, it connects via ethernet. Anyone can shed some light on my problem? If you want more info I can try to give it do you. I went into Device Manager, but I still can't find a local connection tab. I know usually automatic Windows to connect to the device its connected to.

  Hi JoeJ1986,

  • Did you try to run the troubleshooter and to uninstall and reinstall the network card using the steps above?

  Connection to the local network should be present even if its connected through wireless. However, try to uninstall the network adapter, and then reinstall it and check if it works.

  Alternatively, you can try to check if the network connection and the list of network services are started and set to automatic. To do this follow the steps below:

  1. Click Start.
  2. In the start search box type services.msc and press enter
  3. In the services window, do scroll down to the network connection.
  4. Right-click on it and click Properties.
  5. Check if the startup type is set to automatic, otherwise it is set to automatic.
  6. Click the Start button, this will start network connection services.
  7. Click on apply and Ok.

  Repeat this procedure for the network list service and check that it helps.

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Homegroup works via Ethernet, but not via Wireless

  My configuration is:

  PC1) Win7 pro Office connected to the wired to NetGear WNR2000 NetGear DG834 router configured as a WAP browser

  PC2) Win7 Home Premium on a laptop.

  With this config. a residential group created on PC1 can accompanied by PC2 and everything works fine on PC2. However PC1 detects any a computer from homegroup.

  Note that all other functions of networking through working groups are very well.

  When I disable wireless on PC2 and connect to the DG834 or WNR2000 by ethernet, everything works perfectly.

  On the two PCs HomeGroup options are:

  Discovery - Network SUITE

  Files and printers sharing - SUITE

  Sharing with network access - SUITE

  Streaming - OFF

  encryption 128 - WE

  Password - OFF

  Windows managed - IT.

  ------------------------------------------

  I do not have any antivirus or third-party firewall. Using the Windows Firewall only.

  I tried without wireless security on LAN, as suggested in another post, but it made no difference.

  IpV6 is enabled on both computers (have checked the settings registry and services according to the different posts on this forum)

  It's extremely frustrating!

  A few years later... for the love of someone else with this issue... turns out the driver of my laptop's wireless adapter.

  Once I installed the latest driver from the web site of the manufacturer of the adapter, everything is good.

  Readers who came via MS update, unfortunately, have never had the correct versions.

• Satellite P100 GPU fan turns costantly at low speed?

  Finally something strange happened on my laptop and I wonder if even happened to other users of P100 series laptop. All of the sudden GPU fan began to operate at low speed all the time. Before he reached 60 ° C and then had shrapnel short until it cooled down to 50 ° C and the order. But now it runs at very low speeds and temperatures are around 48 C. It is not noticeable and I'm very happy with what (it should be like that from the start).

  Now I wonder what could have triggered that. Do you have bios that has changed (I have the latest 2.40). At the beginning when I changed the computer bios worked as before, but then at some point I changed muffler in performance mode and since that day, the GPU fan runs constantly. I tried to change it to silent mode, but the GPU fan runs all the time. My laptop is P100-115 (Geforce 7600)

  Hello

  Looks like you re a happy with the use of the fan.
  I think that the new BIOS has been changed and that's why he has better influence on the performance of cooling module and so it works at very low speed. I think it is much better than the rotation of the fan restless.

  As you have already mentioned the Toshiba power saver controls the speed of the CPU and cooling method. If these settings could affect the cooling of laptop.
  But believe me; It of much better to have the constant low temperature and fans completely.

• Low-speed satellite Pro U400-142 - Wireless-N speed problems-

  Hi guys...

  I ve just bought a laptop Toshiba Satellite Pro U400-142...
  I have a belkin N1 Wireless cable router...
  I was really happy that I could get the speed up to 300 Mbps... with this laptop and the router...

  I am very very disappointed that he is only showing 65Mbps... My laptop supports Wireless N such that it has a wifi Intel 5100 card inside...
  Why show a low speed?

  I m in the same room as the wireless router if the signal is excellent...
  I've tweaked on with the settings in the network adapter settings...
  I got it to 130Mbps... for about 10 seconds before it dropped back down to 65Mbps...

  Can someone tell me what is the problem?
  I need to change some settings on my N1 router or what?
  This was one of the main reasons why I bought this laptop.

  concerning

  You have reason seems the wireless network adapter supports the Draft N
  But are you sure that you are using Draft N?

  Is it enabled in the Device Manager-> properties-> Advanced tab card WLan?

  At 802.11 N selected in your router settings?
  Update you the BIOS and WLan card driver?

• Satellite A100 - 192 Windows Vista USB low speed

  Hello

  I installed vista on A100-192, I configured everything correctly, all the drivers installed, but the USB transfer speed is totally low and when hollow transfring usb I have sound and video form. / CPU usage is 100 percent when data transfer from my camera or compact flash. Same thing with the PCMCIA card.
  On windows xp, it worked great!
  I guess it's something about drivers, because when I connect my hard drive usb hollow it works very well/windows sees it as a hard drive, but when I connect something else, and windows sees it as a removable drive - about low speed starts :/

  Any idea on how to solve this problem?

  Best regards
  Krystian

  Hello

  do you have what drivers installed? That you have downloaded the drivers, have you downloaded the correct drivers? Sorry for my question, but I'm sometimes on certain things and then I can't explain the errors that are produced.

  Welcome them

• Low speed on Wireless N

  I'm trying to implement a DV6 on Wireless N. I have a Linksys WRT160N router and get speeds up to 120mbps on a desktop wireless located near 100 feet from the router. I can not get over 54 Mbps on the laptop, even within 10 feet. I checked the properties of the device and verified that the width of the channel is set to AUTO and 802.11n Mode is ENABLED. I noticed the rest of my system below specs. Any help would be appreciated.

  LAPTOP MODEL: HP DV6

  Operating systems: Windows 7 (64-bit)

  RAM: 4 GB

  WiFi ADAPTER: Intel WiFi Link 1000 BGN

  PILOT: 13.0.0.107

  ROUTER: Linksys WRT160N

  FIRMWARE: 3.0.02

  After much research, I believe I have solved the problems with the Wireless N of low speeds, especially with Intel WiFi Link 1000 BGN configurations. Here's what I could learn from Intel support forums.

  "The IEEE * 802.11n draft prohibits using high throughput with WEP or TKIP as the unicast encryption algorithm." If you use these methods of encryption (WEP, WPA-TKIP), your rate will be reduced to 54 Mbit / s. Intel® WiMAX/WiFi Link 5350, Intel® WiMAX/WiFi Link 5150, Intel® WiFi Link 5300, Intel® WiFi Link 5100, Intel® WiFi Link 1000, and Intel® Wireless WiFi Link 4965AGN client drivers connect using a legacy IEEE 802.11 g connection rather than failing to connect altogether which complies with the IEEE 802.11n draft standard. "This means that you must use a connection Wi - Fi Protected Access * (WPA2-AES or WPA2-TKIP).

  I have reset the wireless security on my router to use WPA2-AES, reconfigured my laptop for the same security settings and options was immediately connected to more than 200 Mbit/s.

• 2 different laptops wireless internet high speed

  We have two laptops in the House, but get very different wireless speed on the

  My wife has an Acer 5742z with 3 GB of RAM and WiFi Nplify802.11b/g/n

  I have an Acer 5750 with 6 GB of RAM and the same wireless connection

  Both are less than 6 months

  We run the same programs

  We have a Netgear N150 router

  My wife Gets the excellent speed of wireless internet throughout the House.

  I can't get decent speed when I'm in the same room as the router.

  When we arrived first the router I got the right speed, but it deteriorated recently.

  So far, I tried the following command to improve things;

  -System restore

  -Router reset

  -Repositioning of the router

  -Virus scans etc.

  -Diagnostics of Windows Internet - apparently working normally

  If anyone has any suggestions of anu on what could be wrong and how to fix it, I would be very grateful

  Thank you

  Hello Paul,

  See the Microsoft article and look at step 6: "Change your wireless channel"
  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx
  You will need to connect to your router and change the wireless channel that it operates on.
  There may be interference affecting your computer, but not your wife.
  If you need assistance to change the settings of the router, you will need to contact your router manufacturer or your internet service provider.

• limit the speed of Internet on Simulator

  Hello

  Can limit us the speed of the internet to the Simulator?

  I want to test my application in a situation close to reality (especially the "loading screen"). And with my LOCS, I do not see my message "Please wait" :-)

  I not found any related post, or the command line option.

  Thanks in advance,

  Christophe

  PS: I don't know the State/quality virtual GPRS network, but effective the Simulator internet speed.

  You can simulate a low network coverage by clicking the simulation menu and selecting network properties.

  There is no support for limiting the connection (speed).

• As microsoft some tools to speed up internet

  As microsoft some tools to speed up internet

  There are various factors that influence the speed of the internet:

  1. speed provided by the ISP or Internet service provider.

  2. the type of transmission channel used.

  3. the speed supported by the modem.

  4. the speed supported by the port ethernet (wired) or wireless card/WWAN (wireless) network card.

  5. the applications running background using internet bandwidth.

  1. If you find that the internet high speed is more low PSI plan, you can check your internet website like http://www.att.com/speedtest/ speed (you can Google/Bing for more information). If the speed provided by the tester, thus matches the ISP, you should check with the hardware of the internet (or modem).

  2. If the transmission is telephone wire, chances are that there may be noise in the channel, causing disturbances in the bandwidth. If the transmission channel is fiber line, the channel is noiseless and the speed is maximum.

  3. most of the modems available today are capable of supporting speeds more than what today to provide ISPS. If you use a modem that is old, you may change the modem, and then check.

  4 once again, here, always the fastest cable connection, so there will be no problems here. Come to differs from the speed wireless technology, for example, 4 G is fster 3 G in the case of WWAN and 802.11ac is faster than the 802.11n, which is faster than in the case of WLAN 802.11a/b/g.

  5 applications such as Windows Update or any other download being eats internet bandwidth speed and so down.

  Microsoft isn't any tool to boost performance beyond these factors.

• Win XP computer access internet life ethernet, but not recognized on LAN

  Desktop computer Win XP is connected to a local network (via ethernet) and recognized.  Shared files can be exchanged on the local network.  The Win XP computer was temporarily moved to a different location and an installed wireless adapter.  Two weeks later the Win XP computer was returned to the original location, removed wireless adapter and related to the uninstalled software.  Now the Win XP computer accesses the internet (via ethernet), but is not visible on the local network.  Win XP sees no other computers and other computers do not see the Win XP.  Trying to troubleshoot the network.  Troubleshooting the "1394 connection" gave a TCP/IP message has not been activated.  Check the 'properties' found that the 'Internet (TCP/IP) Protocol' is checked.  Is there another place where TCP/IP must be enabled?  Maybe a checkbox?

  Thanks for the help.  Unfortunately, I tried two suggestions, all of the above steps, and nothing has fixed my problem.  However, during the process of going through the steps in the "http://support.microsoft.com/kb/308007/en-us", I discovered "Microsoft Fix - it Solution Center".  Treatment of the symptoms of MS Fix - it network provided an instant repair the problem.  I still don't know what exactly was the problem, but now all computers can see each other on the LAN.

• 2 PCs, PC2 connects via connects the PC1 wireless Internet wireless, network sees home, but will see no internet except with ethernet cable - illogical!

  1 computer (PC1) running Vista, to date, AVG free, Spybot S & D the timer running
  2 may have been infected with spyware by surfing - received message in the Explorer to search for the virus, think it was fake
  3 then lost wireless internet in the two IE & Firefox
  4 but had a Skype conference call minutes 40 OK - Bizarro
  5 lit (PC2) laptop running Windows (light version) 7 - same problem with browsers
  5A AVG on PC1 has been updated - ran a deep analysis, found 44 spywares & fixed them
  5 b also ran registry cleaner
  6 has managed to update Spybot, is all business, then working browsers, internet connection complete
  7 can now connect 1 PC to internet with ethernet connection, he can see the wireless and home networking (local access only) so I guess the wireless work, but he can not see the internet on this subject.
  8 update both Spybot and AVG on PC1 with wired ran the two found no additional infection
  It's really strange, I do not understand how to see PC2 PC1 and PC2 connected wireless to wireless home, but PC1 is unable to connect to the internet without a network cable...
  All pretty useless Windows diagnostics

  Hello

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there are utility wireless isn't running with the native Windows wireless utility provider (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

• I can do individuals match target areas (as it has tutorials for it), but I want that each of them

  Salvation in drag - move, I can do individual match target areas (as it has tutorials for this) but I want everyone can slip into any target area (and someday I want to create a button which will then each item at the right place).

  can someone help me with it
  

  I changed your mUp function to allow each movieclip to be placed on any target and be returned to its original position, if it is not on any target. I added the code to a button on the position of each movieclip to the correct target.

  Import fl.transitions.Tween;

  Fl.transitions.easing import. *;

  Table to contain instances of the target, drop cases,

  and drop the starting positions of the bodies.

  var hitArray:Array = new Array (hitTarget1, hitTarget2, hitTarget3);

  var dropArray:Array = new Array (drop1, drop2, drop3);

  var positionsArray:Array = new Array();

  This adds the mouse down and to place the listener in instances of gout

  Add the starting x and y positions of the bodies drop

  in the table.

  for (var i: int = 0; i< droparray.length;="">

  {

  dropArray [i] .buttonMode = true;

  dropArray [i] .addEventListener (MouseEvent.MOUSE_DOWN, mdown);

  dropArray [i] .addEventListener (MouseEvent.MOUSE_UP, mUp);

  positionsArray.push ({xPos:dropArray [i] .x, yPos:dropArray[i].y});})

  }

  This drags the object that has been selected and moves it;

  to the top of the display list. This means that you can not drag

  This object under what either.

  function mdown(e:MouseEvent):void

  {

  e.currentTarget.startDrag ();

  setChildIndex (MovieClip (e.currentTarget), numChildren - 1);

  }

  This prevents the movement of the selected object when the mouse is

  out. If the object is moved on the corresponding target

  can he get to x and y position of the target. In the opposite case

  He returned to its original position.

  function mUp(e:MouseEvent):void

  {

  var dropIndex:int = dropArray.indexOf (e.currentTarget);

  var target: MovieClip = e.currentTarget as MovieClip;

  target.stopDrag ();

  for (var i: String in hitArray)

  {

  If (target.hitTestObject (hitArray [i]))

  {

  Target.x = hitArray [i] .x;

  Target.y = hitArray [i] there;

  return;

  }

  }

  Target.x = positionsArray [dropIndex] .xPos;

  Target.y = positionsArray [dropIndex] .yPos;

  }

  Low is the instance name of the new button to reposition each

  mobile MovieClip to the correct target element

  setRight.addEventListener (MouseEvent.MOUSE_UP, reset);

  This function moves each movieclip to the right target using an interpolation

  function reset(event:MouseEvent):void {}

  for {(var n: String in dropArray)

  var myTweenX:Tween = new Tween(dropArray[n],"x",Strong.easeOut,dropArray[n].x,hitArray[n].x,3,true);

  var myTweenY:Tween = new Tween(dropArray[n],"y",Strong.easeOut,dropArray[n].y,hitArray[n].y,3,true);

  }

  }

• My iphone 6 s screen has totally blacked out, but siri works. What is its cause?

  My iphone 6 s screen has totally blacked out, but siri works.  What is its cause?

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/