Win XP computer access internet life ethernet, but not recognized on LAN

Similar Questions

• Computer connects to the network, but not to the Internet, connect to the only local

  Hello world

  OK, so I have a HP computer with the installed version of Windows Vista Home Premium 32-bit. I've had it for almost 2 years now and have had no problems connecting to Internet... until now.

  I can connect to networks... both wireless and cable, but I can not get Internet. I used the IP, subnet mask, gateway and server settings DNS to another computer that works with this specific local network just to see what happens... my computer has failed.
  Until recently, I could connect to this WiFi connection in a coffee shop, but the last time I tried it didn't work. I've connected to the network but not the Internet. He told me that the DNS server did not. I'm starting to think that something is wrong with my computer.

  I saw that the solution for some people running the Norton removal tool, however I had uninstalled Norton almost as soon as I got my computer 2 years ago and ran McAfee instead. I don't think that Norton should have an impact on me more.

  Is there a solution to this problem... or I'll just have to try everything that is out there?

  Thanks for your help!

  Hi MomPlaysBass,

  Finally, my problem has been resolved - it wasn't my computer after all. The modem may only be connected to a computer. If you want to connect to another computer, you can connect the computer to the modem and then put it back. My computer worked fine after that. Whenever we want to switch between computers, even if I have to reset the modem.

  I don't think you have the same problem, but just in case, you can try to reset your modem - it's a button on the back or a small hole that you can reach with a pen... Hold the stylus for about 5 sec or maybe a bit more and then let go. That should reset your modem and might help you with your problem. Your computer should also have created a restore point... If all else fails maybe you can try to get back to the final point where your computer worked.

• Computer Vista laptop can see but not access drive C on the Windows 7 desktop.

  (On the Vista machine) Network Diagnostics returns the error message "C is available, but the user account you are logged on with access has been denied", but I'm connected two computers with the same user name and password.  After a week of surfing all over the web, I know that many others have had this problem.  A definitive solution would be much appreciated!  A guide step by step would be great.

  A procedure step by step for the creation of an Ethernet cable to both computers between Windows 7 and Windows XP with ICS

  has been written for a Win7 - XP network but a user reported that the settings work for a Win7 - Vista network as well.

  If you use a router, then who will be the IP settings, then you can ignore these entries in the guide.

  If you have a WiFi network, then the parameters described as being for the network card apply to the WiFi card instead.

  The settings for sharing, the problem you are experiencing, apply any number of PC of on the network.

• Can connect to Ethernet, but not on WiFi

  Hello

  I have an Acer Aspire with Vista Home Basic 5735. Had for years. This weekend I decided to clean the laptop; I deleted a bunch of software that I use, with the installation of "Uninstall a program" in the Panel. I then did a disk cleanup, and then use the Disk Defragmenter.
  Now I can't connect to the internet via WiFi. I usually just turn on the laptop and it connects to my router. My router and the provider are unchanged for a few years now. Although when I click on "Connect To", it shows that I am connected, but with limited access. Limited access is actually no access, given that I can't open Chrome or any other software that requires a connection.
  I know that the router is fine, because my second laptop, a laptop, works great today by the VPN over WiFi, as he always does.
  I plugged in an ethernet cable, and with that I can get on the internet. I went through all the tips I've found - checking drivers corrupt, do a Windows Update, restart (several times), running the network on the network diagnostics, but nothing helped.
  I assume that in the weekend cleaning, I must have deleted a vital file. Any suggestions for how I can restore WiFi ability?
  Thank you

  Hi, Simon,.

  Start, Programs\Accessories and right click on command prompt, select "Run as Administrator" to open a command prompt.
  In the command prompt window that opens, type type the following commands:
  Restore the default install WINSOCK entries: netsh winsock reset catalog
  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log
  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log
  Reboot the computer.

  Try the solutions listed:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/wifi-attempting-to-connect-but-not-no-error-works/4ae17194-ad84-4f49-b87c-9923fd6598ae

  Check your driver

• Can connect to internet when wired, but not wireless

  Just restarted my computer laptop and now unable to connect to the internet.via my wireless router. Am connected to the router, but not the router to the internet. Can connect to the internet by a cable in the router to my laptop. The computer identifies the network correctly when it is wired, but shows as not identified during the use of the wireless router. Already fed the moden and router down twice, without change. other phones that I use are able to access the intwrnet via the wireless router, so I think it has to do with the system restart I just did on this laptop. Any ideas would be helpful

  Hello

  You did it all changes on the computer (which is originally this issue) before this problem?

  Read the following article that may help you.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Wireless Internet w/QuickStart, but not with the regular boot of Win7

  I have a Pavilion dv4-4141us.  With QuickStart/QuickWeb, the laptop has no trouble to connect to my wireless network and Internet usage.  But, when I do a normal in Win7 start, although the lapop connects to wireless normally, it does not provide a connection to the Internet.  If I connect to the router via Ethernet, then cable and wireless connections are good.

  I compared the security type, MAC address, IP address, etc. and can't find no difference between the regular starting values and a quick start.  Troubleshooting Win7 app isn't any help. He recommends that I reboot the router - I did many times without any effect on the problem at all.

  I use the same network wireless with an iPad without any problem, and I have no problem using the Ethernet connection to share files and printers between the laptop, an other PC Win7 and Ubuntu Linux a PC.

  Bottom line: my HP laptop does everything well except wireless Internet (except in quick start mode).

  Hello:

  There the Broadcom 4313 WLAN card you find the parts list for your model.

  See if updating the driver for this card help.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

• Restrict access to the PROD, but not DR.

  I use version 11.2.0.3.0 Production. I have questions.

  1 Prod DB is frequently asked by developers and QA guy with intensive queries of resources resulting in production down? So we intend to restrict access to these users of prod and don't give access to functional users. And for the developer/qa guys, give them access to Dr. (stand-by). So, how do I restrict user to prod but not the doctor (copy of Prod), how can this be achieved? Or any other way to do this?

  2. our production DBAs, complain that they are facing a problem (mighyt be performance related) because of sessions connected for long hours with the inactive state of developer/qa people. But my understanding was, he simply eats low memory (much lower), but will not set any CPU load, so need advice of experts, how session idle could cause problem?

  Use of theSERVER_HOST environment variable.

  See SYS_CONTEXT in the doc of the SQL language.

  http://docs.Oracle.com/CD/E11882_01/server.112/e26088/functions184.htm

  The host name of the computer on which the instance is running.

  SELECT SYS_CONTEXT (' USERENV', 'SERVER_HOST' ') FROM DUAL;

• McKey external hard drive recognized a hard drive in vista, software cd will not load and run, it goes to my computer and can be open, but not installed.

  This windows vista 32 bit has recently had a complete recovery, and now I want to add my old documents, photos and music to the recovered system. The Maxtor safty drill CD must be installed, but the software is recognized by AutoPlay as images to open or add files. AutoPlay is set to run or install the software. Why is this?

  I plug the USB external hard drive and the the only way to know its plugged in is by going to my computer, and then make sure he displayed as a drive hard C: and D:. How can I fix it?

  This computer is still the updates, but this should not be here.

  I would like to have all the answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  "Restore the previous settings, repair installations, recover data."

  Repost in the Vista repair and recovery Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• make-weight: bold;  -works in firefox, safari, internet explore 6 BUT NOT ie7

  font in bold. on an external style sheet style sheet works in all browsers (INCLUDING ie6) but NOT ie7?

  I just don't understand. It even works in ie6.

  NOTE: One thing I should mention is that I have a conditional statement of Internet Explorer to Internet Explorer specific style sheet that targets ie6 and ie7.

  But I don't think that's the question because all other styles works properly EXCEPT make-weight: bold. It's absolutely maddening.

  I tried searching around solutions and the only head I found was written [police-weight: "BOLD"! important;]  ] in using this "!" important"statement I thought would somehow ie7 to recognize. But no dice. He failed.

  Here's the cursed code:

  #date {}

  are-family: Arial, Helvetica, without serif.

  make-weight: bold! important;   / * "BOLD" appearing is not in ie7!  */

  are-size: .85em;   / * Is the size of the police affecting "BOLD" in ie7? -85% * /.

  color: #000000;

  text-transform: uppercase;

  margin-bottom:-.75em;

  margin-top: 6th;

  }

  Again, this works in all browsers, including the ie6... BUT NOT in IE7.

  Any help will keep me from pulling my hair. Thank you.

  I'm agree that these validation errors are probably not what is responsible for the lack of a "BOLD" weight, but just to finish.

  ALT = "retouchTest02" / >

  Note the capital P!

  Setting which will remove all the errors in these paragraphs.

  -Here's the shocking news.  I think you * are * getting the bold characters in IE7.  It's just that they are small.  At least, it looks like this myself in IE test...

• Gamepad Xbox 360 as seen in "Device Manager", but not recognized as "Game controller" and will not be installed all the drivers

  My problem is very similar to the one raised here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Xbox-360-controller-seen-in-Device-Manager-but-not/fcf52151-604e-4BF3-BF55-2fa4930bc415
  However, the OP in this question unfortunately never had answer to his question.
  When I plug my Xbox 360 controller on my laptop, my computer recognizes it as a device, but does not recognize it as a game controller. Instead, my device is listed under a category called "Other devices", and the drivers are not installed (he gets the little warning sign yellow after the icon).
  I tried to install the correct 'Microsoft Xbox 360 accessories' (http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows (Windows 7 64-bit)) and direct the machine to install its drivers from there, but nothing helps.
  I've tried right-clicking on the device, by clicking 'Uninstall', out in him plugging, uninstalling and reinstalling Microsoft Xbox 360 accessories, restarted my computer and each unique combination of these things.
  I tried to talk to an Ambassador of Microsoft, who told me to update the driver and manually make a 'human interaction device', but unfortunately it did not work.
  I called Support of Windows games, who gave me information from these links:
  support.Microsoft.com/kb/908888
  support.Microsoft.com/kb/906347
  Outside of download the drivers manually in the form of 'Microsoft Xbox 360 accessories' (which I already have), I wasn't able to try all of the hotfixes listed in the guides, because my camera is not listed as a joypad or human interface device. It is simply listed as "Xbox 360 Joypad" and it is listed under the heading "other devices."
  It seems that there is just something wrong with my USB and it's just is not installing drivers properly, but this isn't the case. I plugged many other devices, including an iPod, a mouse and an external HARD drive, which all had their drivers properly installed and works great.
  I also know that it is not a problem with the xbox controller, that I plugged into another laptop (also Windows 7 64-bit), as well as pilots very well on the other laptop.
  I'm really puzzled by this situation. Any help would be greatly appreciated, but please do not repeat the information or links I listed here, or who was in the last question which I quoted above. Thank you for your help.

  UPDATE: I finally got to work. Everything is beautifully detailed in this video from Youtube:

  http://www.YouTube.com/watch?v=kxa5CJsDzwQ
  Here's what you do:
  1. plug your device and go to Device Manager
  2 right click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject) and click on "Uninstall".
  3. disconnect your device
  4. If you have not already done so, download and install the appropriate for your device 'Microsoft Xbox 360 accessories' program
  5. plug your device back on and go back to Device Manager
  6 right-click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject), but this time click on "update driver software".
  7. click on "browse computer driver software.
  8. click on "Let Me pick from a list of drivers for devices on my computer.
  9. Select "Microsoft Common Controller" and then select your device. Have it install this driver. From there on, it should work on.
  If you have any questions, my email is * address email is removed from the privacy *.

• iPod nano detected but not recognized, why?

  My wife has an ipod Nano 7 G. We have 10 Windows and iTunes 12.3.3.17. It worked fine for months. But today it has plugged his ipod, and he wiped all the music on the ipod, suffice it to say that she is not happy. She then unplugged, plugged in, and now she is ' ipod detected, but is not recognized.

  I uninstalled / reinstalled iTunes. I followed the process to update the driver. But it still does not work. What else can I do to make it work again. In its current form the ipod (just a few months) is essentially useless.

  If you have already tried to uninstall iTunes, you are probably not completely remove iTunes and software components.  This Apple document lists the components of the installation of iTunes and the precise order to uninstall

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Then, reinstall the latest version if iTunes

  https://www.Apple.com/iTunes/

• New cartridge loaded but not recognized

  HP Officejet Pro 8000 A809 Series - I installed a new magenta cartridge but it is not recognized in the diagnoses.  Any ideas?

  The steps in this troubleshooting page can help.

• ATV 4 see wifi or ethernet but not real internet

  I have an Apple TV that connect via wifi for the networks listed below, and it will also connect directly via ethernet cable to the back of the Airport Extreme, which lies next to him.

  But the camera can not see the internet or access anything that it is about that.

  In the settings it reads still see the wifi network and have a good signal (or that it is connected by ethernet cable), but address IP, subnet mask, router, and DNS LU "N/A" rather than having appropriate addresses and phone numbers

  Turning everything works once again, it will work temporarily, but then after a while (I think that once he woke up from his sleep), the internet has gone again.

  Any ideas what may be going on here?

  DETAILS:

  Model: A1625 (32GB)

  Serial number:

  tvOS: 9.2.2 (13Y825)

  address of WiFi: d0:03:4 b: 33:45:15

  5 signal strength points

  Automatically the date/time value

  Network (BTHub6):

  ISP: BT Internet (unlimited Infinity 2)

  Modem/router: BT Smart Hub

  Additional network (let's call it' method'):

  Connected to the main router BT are two airports of Apple. That have identical parameters and therefore operate as a network

  1. airport Extreme

  7.7.7 software

  Mode: Bridge Mode

  Network: Create a wireless network

  Security: WPA2 Personal

  Connect: DHCP

  Automatically configure IPv6 (mode: native)

  2.4 GHz and 5 GHz two automatic

  2 Time Capsule

  Software 7.6.7

  Airport Extreme-same settings

  This network usually gets 10-30Mbps on the device according to the time of day and use etc (using the Ookla app/website speed Test)

  Note: all other devices work fine including:

  2 x MacBook Air

  2 x PC (Dell)

  1 x MacBook

  2 x iPhone 6

  1 x iPhone 6 c

  1 x iPhone 5 c

  1 x HP printer

  I tried many things

  I tried to plug the ethernet cable directly into the hub of BT as well as Airport Extreme

  I tried to remove one of the airports in the network

  I tried to separate the network 2.4 GHz from the 5 GHz network and tried mountain BIKING on both

  Any ideas what may be going on here?

  I had a very similar problem, immediately after the upgrade.

  I think that I have solved it by changing the settings of terminal BT. In the my network - IPv4 configuration settings, I disabled DHCP that is authoritative and registered. Connection Ethernet TV Apple immediately corrected himself and formed a stable connection.  I turned authoritative DHCP on, and the connection still stands.

• Access Internet without IPv4 but Ipv6 connectivity is OK

  I bought a laptop with IE10 a Windows 8 installed. When I try to log into WiFi, Ipv4 access does not work but the Ipv6 access works.

  I can navigate only in a few pages.

  Hi Francisco,.
  Thanks for posting the question on Microsoft Community Forums.
  As we hear of publication description, Ipv4 does not work when connecting by Wifi.
  We will try to help you solve the problem.
   
  If you could answer a few questions that would help us resolve this problem:
  1. do you get an error message?
  2. you are on a domain network?
   
  Here are some steps that you can follow:
   
  Step 1: Clear the cache of DNS resolution.
  (a) move the mouse to the lower left corner of the screen and right click on the Start and selection
  "Command Prompt (Admin).
  (b) type ipconfig/flushdns, and then press ENTER.
   
  Step 2: Manually configure TCP/IP settings
  Follow the steps to reset TCP/IP.
  one) starts at the desktop view.

  (b) open the command prompt, right-click in the corner when the start window appears, select command prompt (admin).

  (c) at the command prompt, copy and paste (or type) the following command and then press ENTER:
  netsh int ip reset c:\resetlog.txt
  Note: If you do not specify a path of the directory for the log file, use the following command:
  netsh int ip reset resetlog.txt

  (d) restart the computer.

   

  You can read this article on the problems of network connection for assistance.
  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-a-network

   

  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

   

  
   

• Internet OK wireless access in public libraries, but not at home with Telus V1000H

  My laptop Toshiba Satellite A10 makes Internet connection wireless, no problem, when I use it in our Edmonton public library. But at home where we service Telus high speed, I need to plug the V1000H (Telus modem?) to make it work. A Tech. TELUS tried his laptop home, his has worked.

  I tried the solution in the Toshiba Web site but cannot go very far! The laptop model is PSA 10 C - 05 HVM.

  I would be grateful for any suggestion, thank you.

  Hello

  Update the NIC drivers and check:

  http://support.Microsoft.com/kb/283658