E3000 Max Throughput for internet and USB NAS

Similar Questions

• How can I connect Windows XP to several networks, Wi - Fi for internet and the other for file sharing?

  On windows XP, I need to connect to two different networks. Free wifi for the internet and the other for file sharing.

  Different gateways, different static address, same subnet mask. But there is problem when operating simultaneously and must

  a network must be disabled. Is it possible to run simultaneously?

  original title: served various networks simultaneously on windows xp

  Go to where you have configured the static IP addresses for your network adapters.  Leave the "default gateway" blank for your local file sharing adapter and insert a valid default gateway for your wifi Internet adapter.  Of course, this will limit your adapter in a single subnet - which should be OK for use at home or small office to share local files.

  This should work as long as the two physical subnets have two different subnet numbers. In general, this means that the first three digits of the IP address of the adapter can not be the same on both adapters - if they are, then you need to make one of the subnets. (i.e. one is 192.168.1.xxx and the other would be 192.168.2.xxx).  This is usually accomplished in the router configuration page.

  HTH,
  JW

• I got alltel for internet and had to get a craddlepoint router now since switching to ellementmobile I had to get a gateway router cdw530am mdl, but it won't work on my computer at home?

  I had alltell for my internet and had to get a craddelpoint router so I could use my home computer and laptop at the same time, but given that the switch to mobile really, I had to get a combo wifi broadband gateway mdl cdw530am, but now my home computer does not connect to the router , but the laptop with no promblem has anyone else had this problem?     any help would be greatly appreciatted!

  Install the drivers for your new device

  Good luck!

• Satellite Pro M70: buttons for internet and cd/dvd

  I have a portable Satellite Pro M70 with XP and - I believe - service pack 3. I bought it there is a little more than four years (Dec. 2005).

  There is a series of six buttons to the right of the keyboard, just below the power button. The first button has been programmed to launch my internet browser to a key. The other buttons have been to launch the media player and control CD/DVD discs (play, pause, stop, forward, backward).

  These buttons were a convenience, but for some time, they have not worked. I have no idea why. Can anyone help? Can they be fixed easily?

  > These buttons were a convenience but for some time, they have not worked.
  What does that mean? They are broken and do not work or you cannot start defined applications?
  Have you tried to set them using Toshiba control.

  You can start this application from Toshiba Assist > Optimize.

• ASA for DC and Internet purchasing

  Dears

  Hello

  We have a customer ASA application firewall for Internet and VOIP data center.

  for the DC Firewall: I was suggesting that generation Firewall ASA 5585 x. and I suggested to include the IPS SSP10 module with it. but when I was searching in the workflow of the trade of Cisco (CCW), IPS SSP10's end of sale. so I don't know what to use others in the design

  For the Internet firewall: I was confused to go to ASA 5525 - CX. I don't know a lot about the CX and the license, I need. I have to use first to configure CX in ASA 5585?

  for the VOIP firewall, I really have no idea if the firewall can protect VOIP traffic? It is recommended to bypass the firewall.

  Please notify

  > but I noticed that this firewall does not support allowed cluster in CCW. fact ASA CX does not support the cluster?

  No, CX is not supported with the cluster:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa93/configuration/General/ASA-General-CLI/HA-cluster.html#78299

• Question to activate Adobe Acrobat 3D since internet and activation of the phone are no longer supported

  I have a problem to activate Adobe Acrobat 3D for internet and phone activation are more supported. Still getting the error code 5:12029

  Adobe cat was unable to help in this case.

  I am very grateful if someone could help it,

  Benno

  No one can help Adobe. Sometimes you get helpful people on the chat, but the message seems to be that way not supported, we will not enable same old software.

• Connection speed 2.4 Ghz E3000 and USB HDD

  I use WRT160N for my internet and wifi at home. For the storage of the laptop, I use Seagete Free Agent 2 TB USB 3.0, which is nice by car.

  So I desided to buy E3000 and use as storage server, router, internet and wifi.

  I install everything, he went peaty smoot.

  During installation, I noticed that 2.4 GHz wifi shows only max 150 Mbps, but 5 GHz 300 Mbps connection speed (I use wifi mini card dell 1510 on my Dell laption, supports the 2.4 and 5 GHz).

  I tried different things to the 2.4 GHz to display connection 300Mbps speed (disable 5 GHz option, set the mode to "N" only, always use WPA2, etc.), but without success. When I connect to the old WRT160N, I can see 300Mbps speed of connection.

  Can you advice what settings should I set up, so that I can use connection to the E3000 300Mbps?

  The second bit I want to share and comment on is the access speed to the reader of the UBS.

  When I connect to the reader directly on my laptop, I am limited to 32 MB/s (256Mbps) read/write speed (the laptop is USB2.0, so it seems normal).

  Now, when I write of the E3000 max speed wifi I do is about 3 to 3.5 MB/s (24-28Mbps) and when it is connected to the local network (100 Mbps) speed is about 4 - 4. 5 MB/s (32-36 Mbps).

  It seems slow, peaty compared to the speed of the USB. 5 GHz wifi rate shows 300Mbps connection 144Mbps speed/2.4 Ghz (which is 18 MB/s), so that the router should be able to keep read/write rate highter.

  Is this a problem E3000 or this is the max I can get material in there?

  1. it's a router not a storage attached to the network power house. If you want a NAS with high performance get a NAS. The USB HDD is more for practical reasons, then for high performance. Drive speeds you see through the router are good enough for a device like this. Check what CPU you have in your E3000 and which processors they use in NAS devices that are able to provide data of 250 Mbit/s from a connected USB device and you will see that it is a completely different League...

  2. the 150 Mbps is a rate of 20 MHz. The connection uses only a band of 20 MHz and not a 40 Mhz. This is usually due to one of these two reasons:

  a. many pilots (for example Intel Centrinos) wireless equipped with 20 MHz preconfigured on the band 2.4 GHz. It will link ever more quick then 150 Mbps, unless you change the configuration of the driver.

  b. most / all new routers observe interference of signal on the tapes and automatically returns to 20 MHz mode, if they find too much interference. If you have many other access points in your proximity 40 MHz would mean more than twice the interference on the connection. Any other communication on stuck on 40 MHz channels would interfere with your communication. With a lot of traffic interfering on the range 2.4 GHz, you would see very low real rates if you forced 40 MHz in this case.

  And your neighbors using 802.11 g wouldn't really appreciate your bandwidth hogging. Because of the limited number of channels without overlapping on the 2.4 GHz band a router running on 40 MHz basically use 2/3 of the total available on the entire 2.4 GHz band available bandwidth. The execution of 40 MHz in a neighborhood with many other access points is all just a terrible idea...

• Camera USB IMAQdx low resolution-'for internet use"Option?

  Hello

  I have a USB camera compatible directshow. The resolution of the camera should be close to 2600 x 2000 (not sure on exact). When I see 'Available video Modes', the highest resolution is 352 x 288 resolution.

  The company that provides the camera told me to uncheck "for internet use" in the property of the Group of experts to help solve the problem of resolution.

  I don't see that option anywhere. I looked into the property node IMAQdx as well as for any "attribute of the internet."

  Any ideas on where this option is or how I can fix this low resolution?

  Thank you

  Tony

  The option 'Use Internet' apparently does not exist in LabVIEW (the less c. 2010).

  For the directshow driver, the seller of the camera (Motic) created a new registry file that I imported into the registry and cela solved the problem of resolution.

• CC Desktop App for the Government concerning: the end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:

  Desktop adobe Creative Cloud for government applications :end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:

  1. They will be able to download and activate the installation package through CC e package on Internet workstation and transfer with a USB flash drive on a workstation Intranet , hence they can deploy desktop applications to end-user desktops CC?
  2. The deployment of renewal process will work the same as above?

  Government accounts https://forums.adobe.com/thread/1483694 can help

  or

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  or

  http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  Creator of Enterprise Cloud https://forums.adobe.com/thread/1489872 License Restrictions

• Portege R700 - no autorun for CD/DVD and USB keys

  In my Portege R700 there is no way to make autorun works (for key USB and CD/DVD as well). CD/DVD and USB keys work perfectely, but not the autorun.

  I tried to use both the automatic repair of Microsoft and PowerToys, but the problem that it is still there. I also tried to change the registry, but it seems that the changes are not retained. I suspect that it is something related to some utilities or so.
  Can someone help me?

  Thanks in advance.
  Gerlando

  Hey,.

  > I suspect that it is something related to some utilities or so.
  What utilities you have installed? Theoretically, they could block the autorun

  Normally if autorun doesn t work on XP, you can enable it in the Windows registry:
  Start > run > regedit

  The registry editor will open and go to:
  HKEY_CURRENT_USER / Software / Microsoft / Windows / CurrentVersion / policies / Explorer
  Double-click the NoDriveTypeAutoRun value and set the value of 91.

  Now he must navigate to:
  HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Services / Cdrom

  Double-click the AutoRun value and set the value to 1.

  Now restart your computer and try it again, usually autorun should work again.
  Additionally, make sure that the latest Service Pack is installed for XP (SP3).

• HP 15 laptop: If my system is connected to the internet and I use it for 5 minutes it will reboot.

  I really need solution to this urgent problem that gave me concern for some time, once I connect to the internet and I don't use my PC for like 5 minutes, it restarts itself and I will lost all my unsaved files and sound very bad I tried to scan I find the error, but in vain , so please I need a solution to lastin' to this... Thank you in advance. SaiTech.

  I'll be happy if this has been solved, e-mail: [personal information]

• Drivers PCI and USB for W8.1 HP Compaq 8000 Elite SFF?

  Hi guys,.

  I'm trying to update an old workstation HP Elite 8000 LTS to W8.1 but can't find the right drivers for the PCI Serial Port and USB devices. Driver HP downloads page shows nothing for W8 x 64 when I put in the serial number and search for drivers. Apparently, Windows 7 is as far as I can take this machine?

  Naively, I thought that Windows can handle these aircraft out of the box, given his age.

  Can someone confirm if I'm able to run W8.1 on this material and if yes where I could find appriate drivers for it?

  

  Thank you

  Scott

  You are the very welcome, Scott.

  From what I can make of this hardware ID, it is part of the USB2 controller system.

  Something really got blocked upward with the USB/USB2 chipset driver part.

  See if this Intel chipset driver installation does nothing to correct the problem...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20019 & lang = eng & ProdId = 816

• Windows failed to update for HP - Bus USB and Ports, display controllers - HP w2408 widescreen LCD

  I have a new HP M9402 desktop with monitor Hp W2408 Summit.  I get a message to update windows for HP - Bus USB and Ports, display controllers - ACL from HP w2408 widescreen, but the windows download always fails.  I tried several times to download this update.

  Any help would be greatly appreciated.

  Hi all

  The solution to my problem of not being able to make updates to the window was to spend in an HDMI instead of VGA cable.

  BR / / JJG

• SMBus and usb drivers for Pavilion P6-2312ea running Win 7 x 64 3

  Hello

  My step daughter has finally threw his arms up in the air and agreed that win 8 is more pain on a desktop that is worthwhile and is not for her.

  We have installed Windows 7 64 bit and are now just trying to find the compatible drivers for SM Bus controller and usb 3.0.

  I'm assuming that the drivers for usb 3.0 as the keyboard and mouse are ok, just the 2 front usb 3.0 do not work (although that seemed to have given up after a week).

  We executed the 'original' pilots when he was running Win 8 x 64, but they don't seem to have. Maybe a compatibility problem, can be me as it was very early this morning when I gave up for a while.

  Any help/pointers gratefully received

  TIA

  Elmer

  Hello

  Please check the following post:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g-Windows-8-software-recovery/SM-bus-controller-and-USB-controller-drivers-for-Pavilion-P6/TD-p/2814635

  Kind regards.

• IE 7 cannot access the internet and can not uninstall for kb955430

  IE7 abruptly stopped, be able to access the internet - so I tried to uninstall the updates, I got rid of all of them except for kb955430, that has an uninstall option. How can I get rid of him?

  Hi M_khan,

  Welcome!

  You would not be able to uninstall this update, because this update is related to the operating system and Service pack.

  I suggest that you reset the settings for internet explorer on the computer from the link:

  http://support.Microsoft.com/kb/936213

  Check here if you can connect to the internet, if the problem persists, I suggest that you run the Network Diagnostics on your computer, see the link:

  http://windowshelp.Microsoft.com/Windows/en-us/help/7f826a04-B9C3-4edf-bdb6-100691b7319f1033.mspx

  I suggest that you run a Windows Update and install all the windows update on the computer.

  Hope this information was useful.

  Thanks and greetings
  Swathi B - Microsoft Support