E4200 and Wireless N and coexist with Wireless G

Similar Questions

• Wireless router E4200 and share a printer on the subnet

  Hi all

  Now I've been tinkering for 4 days trying to resolve a problem with this, but I couldn't understand it, so I'm hoping to find someone who can help.

  My question is sharing a printer on my main network and the wireless,.

  the description of the parameter:

  I have my main network 10.1.1.0/24 (RV082)

  I plugged the E4200 router in an IP 10.1.1.82 and the wireless network is 192.168.1.0/24

  Set up a printer/scanner with an IP 192.168.1.72 to share on both networks.

  Now everyone on the 192.168.1.0 network is able to access and print but none on 10.1.1.0

  I put a static route on the RV082 to direct applications of the printer be redirect to 10.1.1.82 but without success.

  The E4200 is configured by default out of the box, I had to just put the static IP address, gateway and DNS and, of course, the key to wireless security, nothing else.

  the NAT is enabled on the E4200 and RIP is disabled, I tested the connection by disabling NAT and allowing the RIP, during which I was able to connect to the printer, but Internet went down for wireless users all (192.168.1.0 network)

  So I need help to solve this problem please.

  1. I would recommend to connect the printer to the main network. He two subnets can access the printer regardless of the configuration on the E4200.

  2. If you want to only an extension of your existing network wireless, I would recommend using the bridge mode on the E4200. In this way, wired and wireless networks are in the same IP subnet and everything is much easier.

  3. with NAT on (default), the LAN is inaccessible from the side WAN. This is why your RV protects your local network from the internet. And that is why the printer is not accessible from the RV subnet unless you configure the port forwarding on the E4200.

  4. it is thus with active NAT, you must send the necessary ports for printing on the E4200 and you must configure computers on 10.1.1.0/24 to use 10.1.1.82 to print the wireless network uses 192.168.1.72.

  4. with disabled NAT, you must configure a static route on the RV to route 192.168.1.0/24 to 10.1.1.82.

  5. with disabled NAT wireless clients have no internet because the RV does not NAT the 192.168.1.0/24 subnet. The RV is that NAT because it is own LAN IP subnet 10.1.1.0/24 but not for 192.168.1.0/24. This means that the RV will forward packets 192.168.1. * unmodified in the internet where they are rejected. You must configure the RV to NAT for example 192.168.1.0/24. You must apply to the Cisco Small Business community, whether or not this is supported on the RV.

  So in summary, I recommend to use Bridge on the E4200 mode and function as a single IP subnet. That would solve all your problems.

• Can I use the Wireless Comfort Desktop 5000 keyboard and receiver with a Mobile 4000 mouse?

  Hi, as the title says: can I use the Wireless Comfort Desktop 5000 keyboard and receiver with a Mobile 4000 mouse? I have the kit, but the mouse is to bulky for me and I would use a mouse Microsoft Mobile 4000 but with the same receiver as the keyboard of the kit, is it possible? Thank you

  Hello

  looks at it's not going to work. Wireless products are programmed to be used with a specific key, so they won't work on another dongle.

  B Eddie

• 2013 auto Logitec keyboard curve wireless passes of 6 and 7 with no registration on my part

  I have a new wave of 2013 logitec keyboard.  All of a sudden he gets into 6 and 7 everywhere where there is a vacuum that can be entered.  No need for me to be even inn the room, just he starts and stops spontaneously or when you arrive at the end of the test to white.  Type an email or fill out a form or going to a new web page... 6 and 7 everywhere wherever I look.

  Hello

  This problem can cause if he any corruption or file missing in the drivers folder. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message?

  I suggest you try the steps in the Microsoft Help article and check following.

  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Please reply with the status of the issue, so that we can better help you.

• Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

  Hi all

  I tried to apply the patch from Jan 2016 to the Weblogic Server that runs the RMS Application.

  The version of the Weblogic Server is 10.3.6

  The version of RMS App is 13.2.6

  While applying the patch that has a PATCH-LIST of S8C2 on the Weblogic Server, I encountered the following error:

  [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

  Checking for conflicts...

  Detected A - conflict to solve and run the installation of the patch again

  Conflict condition details below:

  Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

  After reading the forums, I followed the suggestion to delete the previous patch: EJUW and who has obtained successfully removed as shown below, when I tried to install the Patch Jan complained conflict ZLNA patch and when trying to remove the ZLNA encountered unrecognized patch ID patch: ZLNA.

  [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = EJUW-prod_dir = $WLS_HOME/wlserver_10.3

  Checking for conflicts...

  No conflict detected

  Removal of the Patch ID: EJUW...

  Result: success

  [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

  Checking for conflicts...

  Detected A - conflict to solve and run the installation of the patch again

  Conflict condition details below:

  Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA

  [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = ZLNA-prod_dir = $WLS_HOME/wlserver_10.3

  Encountered unrecognized patch ID: ZLNA

  Any suggestions how to solve and apply the fix successfully Jan would be useful.

  Thank you.

  Hello

  Can you please set the download directory of the fix for MW_HOME/utils/bsu/cache_dir/with the help of Smart updated interface and test again.

  To designate a directory to download the hotfix, follow these steps:

  Start the smart update.

  On the Smart Update main window, choose file > Preferences.

  The Preferences dialog box appears.

  In the section Patch download directory of the Preferences dialog box, specify the path to the download patch directory.

  https://docs.Oracle.com/CD/E14759_01/doc.32/e14143/start.htm

  Thank you

  Aishwarya

• Redirect with e4200 and 660 embarq modem port

  Hello, I have a router e4200 and a modem 660 series, I am trying to portforward for a game called minecraft, I can't get ports open, I called century link they told me to put my modem in Bridge mode, so I have, they said, must be public, my private IP not now, it is still private, what I am doing wrong.

  Very well. Great! Now follow these steps and see what happens.

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=93&login=1&VW=1&app=search&articleid=17241&userrole=links...

  In addition, under the tab 'security' on the router, uncheck the option, "filter anonymous Internet requests".

  The tab of the router configuration. There is an option 'MTU '. Change it to manual and reduce the size to 1400.

  See if that helps.

• File sharing and print with XP - Windows 7

  Is it possible to share files and a printer with 1 under Windows 7 Home Premium desktop computer connected to a router and 1 laptop running Windows Xp (wireless) connected to the router (wired). and 1 printer connected to the desktop computer?

  I know that Windows 7 made workgroups can I still share with 2 different OS?

  Yes, it is possible.  These pages show how do:

  Sharing files and printers with different versions of Windows
  Networking of computers running different versions of Windows
  Share files and printers between Windows 7 and XP Boulder computer Maven  
  Most Microsoft Valuable Professional

• Linksys E4200 and connectivity Motorola SBG6580

  Here is a picture of my home network. The problem I'm having is, I can't get the WD MyBook Live Duo to be seen on the entire network. If it is connected to the Linksys, all computers connected to the Linksys can see it, but not those related to the Motorola. If I put it on the Motorola, the same thing happens, but in the visa versa. I bought the Motorola for its DOCSIS 3 capabilities, not for the wireless. I prefer to use the Linksys Wireless. Any help would be greatly appreciated.

  

  Devices must be on the same subnet (e.g. 192.168.1.x) to be able to see each other. You could make the Sb IP 192.168.1.1 and 192.168.1.2 for the E4200 and connect a cable from LAN of the SB E4200 (not WAN) port lan port.

  Here is a guide if you need: http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3733

• BlackBerry smartphones to SYNCHRONIZE MY DELL OFFICE MS OUTLOOK 2000 CALENDAR and CONTACTS WITH MY BB 8330

  I am a personal user and not a business user.

  I loaded the disc of Blackberry Desktop Manager, and when I got my phone.

  When I connect BB to desktop UBS port, open the Desktop Manager to synchronize software... it returns an error message "no application to synchronize.  What should I do to sync MS Outlook calendar and Contacts with my Blackberry.  Funny, is that I get my emails wireless made for me in my mailbox from comcast.  I spent hours trying to figure this out. Can it be done? Thanks to all those who can help you.

  L

  Hi Laurie,

  I did a search just now and I have a thread for you to try. I can't wait to go back, but your situation was resolved by installing a different (older) version of the Blackberry Desktop software. I have Outlook 2003 and XPpro so I know it works.

  Read this and see if it makes sense. I can help you with it if you wish.

  Let me know.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8300&message.ID=4026&query.ID=1886#M4...

• Linksys E4200 and VoipBuster sip call

  Hello

  Just recently bought a router Linksys E4200 and it was rocking so far! I've updated since a WRT320N. However it seems that the call SIP (using my account Voip Buster) no longer works...

  I don't seem to be able to register with the Voip service. Port is 5060 standard (if I remember correctly, I'm not at home now) and I've already enabled on the router the special tick for Voip calling ALG. Router is upgraded to the latest firmware and it's the V1 router.

  With all the foregoing, I cannot yet connect to VoipBuster using SIP. It worked like a charm with the WRT320N, so it's something with the router.

  Can anyone help? Thanks a bunch!

  Try the following steps:

  [A] with the help of the Cisco Connect software (if at all, you have installed the router using this software)

  1] open the software and go to the option that says "settings of the router.

  [2] then click on the option that says 'Advanced settings', which will take you to the router configuration page.

  [3] lower the MTU (Maximum Transmission Unit) of 1500 to 1400 or less (usually found on the main page / basic configuration of your router)

  4] click administration and disable UPnP.

  [B] If you have not installed Cisco connect then you can connect to the router's user interface using its default IP address in the browser which is 192.168.1.1 and enter "admin" as password empty username field. This will take to the web interface of the router and then follow the steps as indicated above to make the changes.

  Second, it also depends on the type of VOIP provider, you must open the ports on your router. H.323 uses 1719 and 1720 for signaling, dynamic ports for media. SIP tends to use 5060 for signage, dynamic again for the media.

  Follow this link and open the ports on your router to your VOIP: http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&login=1&app=search&vw=1&articleid=17241

• New version of firefox, constantly keeps popping up a message asking me to "Bring your bookmarks and passwords with you." I am currently working. He's already seen

  WIndows 7, Firefox 42.0
  New version of firefox, constantly keeps popping up a message asking me to "Bring your bookmarks and passwords with you." I am currently working. It shows me once then stop. OFF to Chrome I guess

  Sorry, this is a message from the heart function. She undergoes a bug right now. Better to turn it off if you can get immediate relief.

  To turn off the heart rate:
  Talk openly about: config config in a tab, then search for browser.selfsupport.url and double click on it and set it to an empty value.

  You may need to restart Firefox for the changes to take effect.

• Index and MATCH with several conditions

  Hi all! I hope I can explain what I'm trying to do here clearly. This is my first shot:

  In the table below "Office entry Worksheet - area 1" I am trying to insert a formula in column B which will result in an answer ' true / false ' and be used for conditional highlighting

  

  The first condition that must be met is that the checkbox in the table "Labor and material Checklist" column A or check, if it is not checked, then move to the next line. If the box is checked, then the following condition would need to index and match with column C of table "Office entry Worksheet - area 1" in column B. If there is a match in column C, then move to the next line of column B in the table 'labor and material Checklist '. This continues until there is a 'match', then highlight column B in the table "entry Office sheet - surface 1" in red (or something like "MISSING task")

  It is an estimate and the idea is to ensure that the Phases that are checked in the table "Labor and material Checklist" will not miss when you use the table "entry office map - zone 1".

  Thank you very much for your help!

  Tim

  

  Is it possible that I can download this spreadsheet file?

• Synchronization of e-mail and contacts with icloud

  I have an iphoneSE c. 9.3 (last updated) and win 10 computers.  I want to synchronize my computer messaging and contacts with my phone.  I need to create an e-mail for this icloud account?  Also, I'm confused by what I should turn on or off in the settings.

  Just set up the e-mail account with the same information on your computer to your phone:

  Set up an e-mail account on your iPhone, iPad or iPod touch - Apple...

  This discussion might help the synchronization of contacts:

  How can I sync my Iphone contacts with laptop running Windows 7

• is there a difference between 38 and 42mm with their pixel density?

  is there a difference between 38 and 42mm with their pixel density? the 38mm and 42mm watches have same interns?

  You can see the technical details of the Apple Watch here. Apple - Support - technical specifications

• With this new firefox updated. The (enter private browsing) is gone and replaced with (new private window). It is sort of back enter private browsing?

  With this new firefox updated. The (enter private browsing) is gone and replaced with (new private window). It is sort of back enter private browsing?

  You can drag links to the private browsing window (hover the icon on the task bar for this update of the Firefox window).
  
  If you drop the link on an empty space on the tab bar, then the link should open in a new tab.