E6430 control Vault w / Fingerprint Swipe Sensor 10 Windows Driver does not

Similar Questions

• Portege R500 - fingerprint reader and SD card reader does not work

  Hello

  I hope someone can help me.

  I bought an opportunity Portege R500 (the warranty is still available until 12/2010) and set up with Windows 7 Home Premium.

  I installed all the drivers for Windows 7 from the specific model support page. Driver Vista have been installed for all drivers, which are not available in Windows 7.

  If everything works fine, except the fingerprint reader and the sd card slot.

  Fingerprints: I tried al a lot of drivers, even that of the R600 and R700 (such as proposed by someone here in the forum). When I run the Toshiba fingerprint utility, a text box tells me, that there is no connection with the sensor. Authentc software does not work either.

  SD card reader: I tried several SD cards from a card SD 2 GB simple and old (but functional) Kingston. According to the Director of devicce, the driver is correctly installed and running.
  The blue icon next to wireless light turns on and after a "long", a message box appears and asks me to format the card. It takes a little longer and then I get the massage, the card cannot be formatted. I tried the same procedure with a SDHC card 4 GB and a Micro SDHC card in a SD card adapter. Then of course the cards are identified but not usable and formatted.

  There are several reports of other users of the internet, the locations of sd card in computer models laptops different toshiba have problems under Windows 7.

  The two problems have emerged as well under Vista. My hope was, this upgrade to Win 7 solve poverty. Unfortunately remain the problems of th I have Win 7.

  Thanks in advance,

  Michael (Germany)

  Thanks for the feedback second
  By the way; It is a forum for user to user in this community, everyone is trying to help everyone, so if someone wants to say that he would be able to help, then you will get a response from such user maybe you should also pass a few simple threads in this forum and might help other users as well?

  Tip; BIOS update and setting BIOS by default (with F9) can solve many problems... it's worth a try...

  By the way; Win 7 is able to update the drivers automatically. I recommend that you run an update in Device Manager and let windows search for the update.

  I ve got another laptop and installed Win 7 as well. The card reader Vista driver has worked for me on Win 7 OS just a tip

• My Wireless Mobile Mouse 3500 driver does not allow me to control the scrolling of the wheel

  My Wireless Mobile Mouse 3500 driver does not allow me to control the scrolling of the wheel. When I scroll it will only pages and no option available for the adjuments to go through all the 3 lines or more. I thought that I had downloaded the wrong driver but the mouse did not bring a CD or another. Returned to download the specific driver and still can't get in there.

  Hello

  1 have you made changes to your computer recently?

  If the mouse works well, if a setting should be changed the mouse in the intellipoint software, you can contact the manufacturer of the device for more assistance.

  http://www.Microsoft.com/hardware/en-us/support

  For more information you can check the link below.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Concerning

• Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool liquify (photoshop cc 2015): what should I do?

  Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool of liquefy; I can't change the size of the brush or hardness. OS win 7 Professional 64 bit, wacom tablet intuos 6.3.14 - 1 driver s pro, Photoshop 2015 CC worm.  2015.0.1 20150722.r.168

  What are your settings of GPU acceleration?  As I understand it, the Alt right click size and hardness adjust needs acceleration GPU to be turned on, but I have a feeling Brush hardness is always set to easy when using fluidity.  You can still see the quick mask as representation of the soft brush when Alt right click, but you can't change the hardness.

  Is that you can change the brush size and pressure (framed in red in my screenshot) Alt right click drag left and right changes size and down to pressure changes, and you can see what is happening in real-time by looking at the sign on the right.  It works independently of your acceleration GPU (IME) settings, but you don't get the effect of soft red quick mask.

  

  Does this fit with what you see, or you are not able to change things at all?  If not, then I've always found that fluidity consumes system resources, if you could check the Task Manager > Performance tab to see what kind of RAM and CPU use is using the fluidity.  That's what I see after direction the lens above with a big brush continuously for 10 seconds.  Note This is on a fairly quick NLE System.

  

• Windows 8.1 Fingerprint Sensor Driver does not

  Hello guys,.

  After I updated for Windows 8.1 my fingerprint sensor driver no longer works!

  my laptop is Envy-Dv6 7300 ex

  I trid download last update driver for Envy-Dv6 7300 ex driver fingerprint sensor digital validity 'sp58900.exe' file, but does not!

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132 & LC = on & CC = Aemea_middle_east & DLC = in & sw_lan...

  HP experits!  What we please? It is the urgent dinner!

  Thank you

  Abdelrahman Nabil

  Software Developer

  Happy for you missing USB driver yellow is the sensor I belive after I uninstall and reinstall easy pass HP works like Charm after the reboot!

  and it was one of the manythings that I try.

  but I guess the way to write it as follows:

  1. go to the Device Manager.

  2 - uninstall the USB not recognized yellow marke and uninstall Valideity WBF DDK to add/remove components.

  3 - Download the driver of sensor of fingerprint of CV for your labtop.

  4 reinstall HP Simple pass without uninstall it so you do not miss the credintial registered, you have sites Web and windows login.

  5 restart your knees.

  See you soon!

• Even after the installation of the fingerprint scanner Scan fingerprint driver does not work

  I have hp pavilion dv6 7012tx and she was pre installed with windows 7, but now I have installed in windows 8 and my fingerprint reader does not work. I have installed finger print driver but its still does not, please help me.

  Thank you!!!

  Hey, I got it to work for me. Read what I posted in another thread

  (page 3) and see if it works for you also.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-J070CA-Windows-8-1-validity-fingerprint-reader/TD-p/3025495/highlight/true/page/3

• Diagnose Windows Update does not trouble; said needs change to control panel home computer is not found; get a sound error

  Windows update install not about 1/4 of the updates.  The diagnosis of accreditation site Fix Web does not run; said needs to change to the Control Panel home computer that just sounds wrong asked what computer to find.  Nothing in the regular Panel reports.  How to fix?

  Hello

  1. you get any error message?

  2. what Microsoft fixit you talking?

  3. were there any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Check out the link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Fingerprint sensor satellite A100-912 does not correctly when the AC is connected

  I have problem with fingerprint sensor. It works fine on battery, on the current but it is impossible to connect with sensor there error message with yellow question mark of poor quality.

  Hello

  This sounds really weird. If the sensor works well in battery, then it might not be defective. Maybe just a software problem, perhaps with powersaving it s.

  I suggest that you can remove all traces of fingers, remove the software and also to recover your machine to test the problem persists after you perform this action. If so, you must bring the machine to a repair center for a checkup of material.

  See you soon

• HP Pavilion m7-11dx Windows 7 sensor on pass Simple does not

  I went and closed my lap top but do not put in mode "sleep" or stop it, I just pulled the top down.

  When I came back and lifted the top, I went to Simple passage, R clicked the icon of MS and when he came, he showed the following: "unrelated probe, sensor Connect.

  Answers would be appreciated.

  Eugene,

  The results you get when you close the lid are defined

  • Control Panel > set view icon > Power Options > choose the closing cover

  You do not have the ability to adjust the "closing of the cover" to "do nothing;" This is a deliberate action and the 'status quo' parameter is not something the computer would be standing on its own.  You can check "close cover" is what you expect.

  ===========================================================================================

  The setting of the sensor maybe went to sleep (it is separate from the computer 'sleep'), the parameter may be corrupted, or the pilot might have become confused.

  You may be able to reset the pilot / sensor with the following:

  • Perform the Hard Reset .
  • Start the computer and connect

  Good luck!

  Click on the star of congratulations !

  It's a big 'thanks' for all HP Experts who are here to help!

• Scan fingerprinting - and Tecra M10 notebook computer does not properly

  Hello

  We got a Tecra M10 notebook and its fingerprint reader is not working properly and I tried all kinds of things to make it work but not joy.

  Can I know how can I claim the warranty, and how to contact Toshiba service provider because I can't find the coordinates of the Toshiba warranty service?

  Don

  Hello Don

  Before contacting service install OS using Toshiba Recovery CD/DVDs. With digital fingerprints factory settings scan and preinstalled software should work correctly.

  Otherwise, you can contact the nearest Toshiba authorized service provider and ask for help. They check the functionality. Addresses and phone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck.

• Control Panel opens more and and prel-oaded games does not start

  I can reach the game (s) of the screen, (ie the hearts, chess), but they will not run. When I went to the Control Panel icon, it would not open as well.

  Thanks for any help.

  Hello
   
  1 did you changes to the computer before the show?
  2. you receive an error message when you try to launch the control panel or Windows games?
   
  Please follow the steps mentioned below:
   
  Method 1:
  Run the SFC scan. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.
  Scan sfc enforcement procedure:
  a. click Start, click all programs, click Accessories, right click on prompt, and then select Run as Administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  
  sfc/scannow
  
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833
  
  Method 2:
  
  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
   
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Control Panel / window Options does not save

  In the latest version of Illustrator (CC 2015) my preferences in what I want to show / hide my control panel do not save (all verified) and have to be redone whenever I start the program. (image below)

  

  Other things in the window Panel behave in the same way, having to be reset whenever I launch illustrator:

  • 'Framework application' is always disabled
  • "Workspace" always resets to "Essentials".

  Please fix this.

  Illustrator crash when you close it?

  Any error in your preferences file?

  You can see the privileges of the user on your system.

• "physical, no written control point" is low, but increase in roll forward does not help.

  We have a busy database, the physical write is so high that we want to reduce the physical writing. The statspack, we could see "physical writes non checkpoint" is low in comparison with 'physical writing', so I think the physical write results from control point is high, then I increased the size of Redo from 2 G to 4 G (now the command to log every 4 minutes). I hope that this may reduce the physical writing, but the fact is that the roll increased forward is powerless.

  Statistic                                      Total     per Second    per Trans
  --------------------------------- ------------------ -------------- ------------
  physical writes                            8,298,681        9,210.5        249.8
  physical writes non checkpoint             3,229,321        3,584.2         97.2

  We use the oracle 10.2.0.3 on solaris 10, checkpoint-related parameters are

  fast_start_io_target                          0                  
  fast_start_mttr_target                        0                  
  log_checkpoint_interval                       5000000            
  log_checkpoint_timeout                        0     

  Thank you
  
  Published by: user646745 on August 18, 2009 01:24

  FAST_START_MTTR_TARGET is set to 0

  Make sure that you explicitly defined FAST_START_MTTR_TARGET on 0.
  If you have not set it, a "show"parameter will be enabled see the value 0, but the automatic setting of the control point will be . (See Note MetaLink #265831.1)

  If the size of redo is 4G, we will have two control points for each 4G...

  Yes, there will be one for the log_checkpoint_interval and the other for the control of log file.

• Toshiba HDD Protection - Shock Sensor Driver does not work with Vista

  I have improved my Tecra M7 for Vista Ultimate last weekend and there are a number of things that do not work. It's very frustrating because I followed the procedures shown on this website diligently upgrade and will have problems.

  Can someone tell me what zip file contains the utility Toshiba HDD Protection shock as I installed everything (except the Config Free because the Zip file seems to be corrupted) and I can't find it anywhere. I noticed that when Vista was recommend the automatic updates after installation it is recommended an updated driver for the HARD disk Protection utility, but is nowhere to be seen and I can't find an installer for anywhere. Does anyone know how to handle this?

  Thank you very much

  Chris

  I don't know if it will help, but try to use the utility disk for Tecra M9 protection.

• Hard drive does not meet the system controls

  bad sectors on hard drive

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW