Toshiba HDD Protection - Shock Sensor Driver does not work with Vista

Similar Questions

• Satellite P100 - 400 (PSPA6E): display driver does not work with Vista 64 bit?

  Hello

  I have a P100-400 (PSPA6E) Satellite and I just got the new version of Windows Vista x64bits. I tried this version of Vista because this series of laptops in the 64-bit processors. Well, the problem was when I downloaded the drivers to display on the site and when I'am install the installer says I'm not a Windows vista OS.

  Well actually these drivers only work for Vista x32bits. And I had the same problem with the audio drivers. If Vista was running really slowly and noiselessly, perfect...

  What I am asking, that is, if you realize laptops with 64 bit, why aren't you drivers that work with 64 bit systems...

  Hello

  In fact 64-bit Toshiba drivers are not available at this time on the Toshiba page.
  I think 64-bit drivers are not available because Toshiba doesn't provide any laptops equipped with 64-bit operating system.

  But as far as I know that the new 64-bit drivers should appear both text.
  I'm also looking for these drivers because I m an owner of the 64-bit version of Vista.

  It seems that we have to wait but I m sure that the drivers will be available.

  concerning

• Qosmio G55 - Q804 WIFI driver does not work with Vista 32 bit Ultimate

  I have Vista 32 bit Ultimate and everything is loaded and great job EXCEPT my internal WIFI adapter which is a unit of Intel.
  I would like to know if anyone else has handled this problem on this laptop? Is there something that I am missing?

  Why the driver of the habit?

  I'm an IT admin expert and have run many pieces of hardware in my life so I'm not at a loss to try different tricks and all of them have failed. If anyone can learn an old dog a new trick to get to this loading, I would be more apprciative.

  Thanks in advance

  Coogrrr

  Hello!

  Downloaded the latest driver and the Toshiba BIOS?

  Here you can download:
  http://www.CSD.Toshiba.com-online download-online mobile => Qosmio-G55-Q804 online

  Try with the new driver WLAN and the BIOS and if you have problems, make me know it.

  Good bye

• my hybrid HDD/SSD drive does not work with my new Y50

  my hybrid HDD/SSD drive does not work with my new Y50

  Help!

  Hi YouMaCry,

  You have any records? or a USB recovery?

  If you cannot install an OS on your SSHD your SSHD can be defective, because it is reading it is cluster/bad sectors. A defective HDD/SSD/SSHD can still be detected (sometimes even when it is defective).

  To be sure contact Lenovo Support Center and ask them to send you your SSHD/unit in a get fully tested Lenovo the SSHD repair depot - and have defective parts repaired within a reasonable time!

  See you soon

• External Combo CD-RW/DVD-ROM drive does not work with USB 1.1

  Hello world

  I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...

  Thank you very much in advance.

  Kind regards
  Steffen Rieger

  Hello

  AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.

• I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  Download and install the trial version of Lightdroom CC.

  Then enter your serial number, follow these steps

  How to convert a trial CC 6 Lightroom Lightroom

• Toshiba canvio 1 TB portable hard drive does not work with windows 8

  The drinking Toshiba Canvio 1 TB hard drive is compatible with Windows 8?

  Hi Michael,

  Welcome to Microsoft Community and we are happy to help you on this question.

  According to the description of the query, the Toshiba Canvio 1 TB portable hard drive does not work on the computer.

  I ask you to answer some question in the context of this question:

  Do you have an error message when you try to access the hard disk on the computer? If Yes, what is the exact error message you get?

  I would like to inform you that the Toshiba Canvio portable hard drive is compatible with Windows 8.

  You can check the link to verify this compatibility with Windows Compatibility Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Toshiba%2Bcanvio%2Bportable%2Bhard%2Bdrive%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Please answer us with the required information on this issue in order to help you.

  Let us know if you have other Windows related issues.

• Driver does not work with G32-304TX

  How can I do the only thing it's wireless is not working on my labtop I tried to install the new windows, I tried a lot of windows (7 64/32 bit), but the pilot of your website does not work with me can you give me a new please

  PS I format before it still works

  Hello:

  It's the wireless driver that you are interested in according to the list of parts for your laptop.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1 & CC = US & DLC = in & LC =

• Re: Satellite L300D-13s - WiFi does not work with Vista

  I have a L300D-13s that came with Visa Home Premium on it.

  His work very well outside the wireless that refuses to work.
  I always "Wireless Association failed because Windows did not receive response from the access point or wireless router.

  The wiresless is a Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  I am running the latest version of the BIOS and the 6.1148.924.2008 drivers dated 2008-09-24. If I use the latest drivers on the RealTek site, I get a message about an unknown error.

  If I use the NETWORK Ethernet card, then he gets a fine IP address so this isn't the show indicator to publish.
  Its not wireless security (I understand that Vista does not support WEP 128 bit). I turned off and it still does.

  Other laptops running XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux.
  If the problem obviously lies with Vista and/or the drivers.

  If someone has solved this.

  And no - don't tell me to go out and buy a router "Vista compatible".
  If Vista does not work with router XP and other operating systems compatible with Vista is wrong.

  Hello

  > Other portable XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux. If the problem obviously lies with Vista and/or the drivers.
  I would say it is not a Vista problem or a Realtek driver problem because I have a Vista and Realtek WLan card and I can connect properly to my router.
  In you case, I would say that there is a compatibility problem between the router and the Vista because as you said the laptop can connect properly using Linux.

  I have goggled a bit and could solve most of the people who have had this issue, update the firmware on the router s.

  Maybe you should try that too.

• Logitech USB microphone does not work with Vista, Service Pack 2, PC. ____

  My Logitech USB Desktop Microphone does not work with my Vista, Service Pack 2, the PC.  He asks the driver, but Logitech says it's in the Vista software, here is the largest part of the error message:

  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site.

  Signature of the problem: Problem event name: PnPDriverNotFound Architecture: x 64

  This seems to be a problem that's happened, but after searching for hours, I can't find a quick solution.  Any help?

  Hello

  Please do as I suggested in the answer above is probably the solution.

  You can also do this after the above.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• U3 USB stick 4 GB does not work with Vista

  Hello

  I bought a new toshiba 4 GB USB but it did not work windows Vista and an update is not available. Can someone tell me if there is another solution for my problem.

  Sorry for my bad English, I'm German

  Tried this stick with another computer? The stick is may be defective and you need to exchange it by your distributor. Just try it and let me know what happening.

  See you soon

• Toshiba 1 TB external HARD drive does not work

  I have a 1 to external drive what cards via usb cable, Ive put a lot of multimedia files on it and have been using it without problems don't have nothing put on for a little while, went to look for some files off it and comes up with usb not recognized, put it in another computer and the light comes done hard disk a rattling for a few seconds then hummes just as if it turns While the light stays on and is not all pulse, on the computer, it emits a sound to say ive plugged the on the bottom, it says safely remove hardware.

  Ive tried on two computers when in my computer it does not record.

  PS im not the tool sharper in the hangar when it come to tech stuff.

  The same problem. I bought edition 2015 last fall. It has a power supply problem (electrical problems). I thought it's because of my laptop. He made her crazy, but SMART was ok. Yesterday, it makes noises again and now it does not work. I saw light blue and only a little sound of pcb as start start. I saw that head of player on the Board.
  It's really a defection from the factory.

• Network adapter driver does not work with the recovery discs provided by hp

  Hello

  My wireless light does not illuminate. The network adapter driver does not install from the recovery of the driver CD.

  Here is the hardware ID. Please provide a link to the drivers:

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI\VEN_10EC & DEV_8176 & CC_028000

  PCI\VEN_10EC & DEV_8176 & CC_0280

  Thank you

  You are the very welcome.

  It does not sound like a heat problem.

  I don't know a lot about the repair of hardware issues beyond replacement memory and hard drives.

  I could try to clean the area of fan/radiator with a can of compressed air and see if that clears any dust that may accumulate.

  To do this, disconnect the laptop from the AC adapter and remove the battery.

  Insert a rod through the air fan to keep the blades turning when you spray air.

  Spray through the air intake fan and watch to see the dust out of the exhaust.

  Repeat once or twice and blow air from the other direction of the drain line to the fan.

  The other driver, you need is the driver of protection Protectsmart hard.

  See if it works.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

• Canvio Plus 2.5 "1 TB external HARD drive does not work with USB 3.0

  I've had this drive for about a month.

  I am on Windows 7

  I can only operate by connecting to USB 2.0 ports. It is then visible in 'My Computer'.

  If I connect to USB 3.0, it turns on the case but does not appear in 'My Computer'.

  I tried it on all my USB ports 3.0 - up on one and two in the back of my case.

  I checked my BIOS and USB 3.0 is enabled.

  I tried to follow the suggestions in the user manual, but the drive does not appear in the management of so connected devices on USB 3.0, but it does when connected in USB 2.0.

  Any ideas?

  Hello

  As much as I know the Windows 7 system requires installation of additional USB 3.0 driver.

  Many laptops and computers use USB 3.0 driver that was released by Intel... it is because of Intel chipset...

  I guess that USB 3.0 is already installed, but probably you need to update the driver at least to the newest version...

• Scanner does not work with Vista Windows Equium A210-171on

  I have a Toshiba equium laptop (Vista)
  I am wanting to buy a scanner so I can scan documents to computer. (I have an all-in - one but the scanner does not work)

  Please indicate where to go?

  Thank you

  Hi Suzanne,.

  Sorry, I Don t understand why you want to buy a new scanner. First of all, it would be nice if you tell us what satellite you have. Other useful information would be exactly, what does NOT work on your satellite and your 'all-in-one '...

  Please provide more information on this subject and maybe you shouldn't buy a new scanner.

  THX