E6540 mSATA support and speed

Similar Questions

• Internal Bay wiring HP z800 does support higher speeds?

  Hello

  I'm interested if internal Bay wiring HP z800 supports higher speeds - 12 Gbit/s and 6 Gbps?

  Or should I use berries 5.25 "to mount and connect directly to the controller SAS 12Gbps with data speed has approved longer cables?

  Thanks for the reply

  HDD Bay Z800 wiring was not validated to 6 Gbit/s or 12 Gbps speeds for SATA or SAS drives.  The higher speed drives were 3 Gbps when the Z800 was released.

  It is better to use the berries, 5.25 "and connect the readers directly to the SAS 12 Gbps controller with high speed cables.  6 Gbps PEUT work with internal wiring, but 12 Gbit/s is too high.  Higher approved data cables speed superior to 6 Gbit/s and 12 Gbps avoids any problem.

• HP PAVILION NOTEBOOK N012AX 14: AMD - A10 5745 carrots not working. And speed changes do not

  Hello, I have this problem. My processor AMD A-10 5745 M has 4 cores, I can either change from 1 up to 4 cores. But then, when I change to 4 cores, I restart and it uses a lot of my ram, so I had to change it back as 2 kernels, then at the next reboot. I look again in my hearts. He said that I have only 2 hearts. And I can't change it to 3 or 4 my CPU cores. My CPU doesn't change, it kept being also 2.10 ghz constantly which is my maximum processor speed. But before all this happened, my Simultaneosly changed CPU speed. Help, please. I have had no recovery, what can I do? Is that a bad thing or so? Please answer as soon as possible.

  -Thank you

  Hi @RedCheesecake ,

  Thank you for visiting the Forums HP's Support and welcome. I watched your show on your HP Pavilion Notebook 14-n012ax and the problem with speeds. You could restore the BIOS with this document by selecting the reload the default BIOS settings that could solve the problem with the speeds and the fans.

  Here's a document on improving your system.

  Make sure that all updates are completed within the control panel or click the Windows key and start typing the laptop settings, then go to update.

  You could try a refresh of Windows 8. Please read the entire document before performing.

  Please let me know how it goes.

  Thank you.

• HP 15 t touch M8U72AV_1: M8U72AV what type and speed memory took this Lalonde

  What a memory this hp laptop does take? What is the type and speed. As ddr3 or ddr3l. M8U72AV

  Here is the Service Manual:

  Manual

  Two not customer-accessible/upgradable memory slots (Intel Core processors) module DDR3L-1600 channel double support

  Page 42. There are some models where you need to remove the motherboard. On your own, you can remove the entire bottom panel and memory is exposed without removing the motherboard. If you mess with her compromise you security, but HP will honor the warranty if you do without damaging anything.

  He will accept a second module of the SO-DIMM DDR3L-1600 4 GB, for a total of 8 GB, which would improve performance a bit. This is the HP no. part.

  4 GB 691740-005

  It's good memory:

  http://www.Amazon.com/HP-691740-001-1600MHz-PC3L-12800-memory/DP/B00CI08FX4/ref=sr_1_1?ie=UTF8&QID=1438515158&SR=8-1&keywords=691740-005

  Good luck.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• When I try to play a CD or DVD, the door opens and I get a message "insert a support and try.

  When I try to play a CD or DVD, the door opens and I get a message "insert a support and try. But the anti-virus scan of the device and report No. ERROR. Only play is not possible

  When I try to play a CD or DVD, the door opens and I get a message "the drive is empty. Insert media and try. " But many programs, such as antivirus programs analyzing the device and NO ERROR report. It is not possible to play alone.  No player of media, including Windows Media Player 11 or Windows Explorer does not recognize the presence of the media. I tried with many CD and DVD that plays normally on other computers with similar OS and also on DVD players.

  My computer has Windows Vista Home premium with Service Pack 2.

  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Hello

  Click right tab taskbar - task - process - make sure WMPlayer.exe Manager, nor any other
  the player is responsible - in the affirmative PROCESS END on them and try again.

  -----------------------

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and your must read on the edge outside these tolerances of discs.
  They may be delivered, but it is generally more economical to replace the disk. Can burn you
  a mastered CD and a DVD mastered on this computer and laptop and other computer
  machines? Can you do the same on the laptop and play in this machine?

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• an add on icon called 'supported site' contains the history of the site supported and cannot be removed or deleted. That's what I want to do, but cannot do so

  In the same menu adjacent to the star favorite is an icon that opens with the name 'Sites supported' and he holdds the history of visited sites (this is not the historical record). I have the site set up for not remembering history.
  Down to brass tacks. all I want to do is permantly get rid of this icon (supported sites) and its history.
  I started Firefox in safe mode, and the icon will not appear. But as soon as I re - open firefox, yes you guessed the bloody icon and all its content is still their.

  Type of topic: addons< enter > in the address bar to open your add-ons Manager.
  Access key; < Control >(Mac = < Command >)< shift > has)

  In the Manager of Add-ons, on the left, select Extensions.
  Find the module, then select delete.

  However, if there is no button Delete, then it is a plugin.
  You need to remove the main program from your system.

• I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get i

  I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get into the phone. Why has this happened?

  The United Kingdom, where did buy you it?

• new Google Maps saye, my worm 21.0 Firefox is not supported and will not load - how to solve?

  New version of google maps is out. Went to charge and Google says 'not supported', and specifically notes that he wants to WebGL. How fdo to check if this option is enabled, or how to get it... or is it something else?
  Thank you
  Wallt

  Hello, the full version of the new google maps does not work under windows xp: https://support.google.com/maps/bin/answer.py?hl=en & answer = 3096703

• CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  Macbeth,

  From your description, it appears you are trying to get your mail using Safari to access your e-mail account. Why you do not use the Mail App?

  http://www.Verizon.com/cs/groups/public/documents/adacct/Setup-email-mobile-Devi Ed.pdf

  

• Safari version is not supported and is obsolete, and yet I'm running El Capitan?

  "Version of safari is not supported and is out of date" message, and yet I'm running El Capitan?

  Have you checked the Appstore to make sure that no update available for Safari? If there is download and update of Safari. Otherwise, this can be a problem, try restarting your computer. I hope this helps!

• 4415 proBook s: replacement of the optical drive - need a support and screw

  Hello

  I'm replacing an optical drive, reference 535816-001 for a 4415 s HP's Probook. I've lost the support that attaches to the rear of the optical drive, seen in Maintenance and Service of Guide on page 68 (http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c01918897-3.pdf). The HP parts store said that the replacement of optical discs does not understand the support. I also talked with HP Support, and after putting me on hold and check with their supervisor, said that there is no spare part for the optical drive carrier. Does anyone know of a place to buy a replacement media for optical drive 535816-001 part number that would be compatible with a 4415 s HP's Probook?

  I also need a Phillips PM2, 5 × 7.0 live which blocks the optical drive to the computer. I saw screw for sale online kits, but was not sure if someone knew a place where I could buy one.

  Thank you very much for the help.

  NuttySquirrel wrote:

  Hello

  I'm replacing an optical drive, reference 535816-001 for a 4415 s HP's Probook. I've lost the support that attaches to the rear of the optical drive, seen in Maintenance and Service of Guide on page 68 (http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c01918897-3.pdf). The HP parts store said that the replacement of optical discs does not understand the support. I also talked with HP Support, and after putting me on hold and check with their supervisor, said that there is no spare part for the optical drive carrier. Does anyone know of a place to buy a replacement media for optical drive 535816-001 part number that would be compatible with a 4415 s HP's Probook?

  I also need a Phillips PM2, 5 × 7.0 live which blocks the optical drive to the computer. I saw screw for sale online kits, but was not sure if someone knew a place where I could buy one.

  Thank you very much for the help.

  Wait, I don't understand it how can you lose this part if you already work on it? And for your parts, you should look on eBay if they have this hardware and screws for your car as well.

• Taken aback by the support and assistance from HP

  I have a laptop HP ZD8000 series (ZD8215us) and my guide told me that I can improve my RAM to a maximum of 2 GB.  Recently, I have reinstalled the software HP help and Support, and after my system scan it reported that I could update my RAM to 4 GB.  WHICH I believe?

  (I am running Windows XP Media Center Edition and I guess that's the 32 - bit version operating system because it does not say that it is 64-bit).

  Do unto others that you would have them do you. Remember, God is watching.

  I found this on the Microsoft Web site.  To better explain the 32-bit operating system, Microsoft has used this (2 * 32 - 1 = 4 GB).

  Windows NT 4.0: 4 GB
  Windows 2000 Professional: 4 GB
  Windows 2000 Standard Server: 4 GB
  Windows 2000 Advanced Server: 8 GB
  Windows 2000 Datacenter Server: 32 GB
  Windows XP Professional: 4 GB
  Windows Server 2003 Web Edition: 2 GB
  Windows Server 2003 Standard Edition: 4 GB
  Windows Server 2003 Enterprise Edition: 32 GB
  Windows Server 2003, Datacenter Edition: 64 GB
  Windows Vista: 4 GB
  Windows Server 2008 Standard: 4 GB
  Windows Server 2008 Enterprise Edition: 64 GB
  Windows Server 2008, Datacenter Edition: 64 GB
  Windows 7: 4 GB

  http://support.Microsoft.com/kb/2267427

• What is the amount of maxamum and speed of ram for acer aspire 5733z?

  I can't seem to find anywhere it teels than me the maximum and speed of ram of the machine (5733z) can manage. I want to perchase and upgrade of physical ram me. You know 5 minutes

  Nice day

  Until 8Gig DDR3 1333 Mhz with ram 2 chips

  Kind regards

  FReeZA

• WRT160NL Exchange download and speeds.

  Hello world!

  WRT160NL Exchange download and speeds.

  

  Before the router, everything's fine, then it is wireless or Ethernet port is over situation.

  No difference what firmware it is (1.0.02, 1.0.03, DD - WRT...)

  There are many things to take into account for the same problem, I found this link then. You can check this, http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=22110

  Also, have you tried to reset and reconfigure the router? If this is not the case, try to do first.